Item Description large scale mower rought terrain.pdf

1 EA Large scale slope mower for rough terrain and steep hills including a achments.

SLOPE MOVER

hydrostaƟc drive and all-wheel drive

Diesel Engine:

min. 2615 cm³, turbo diesel, 4 cylinders, 4-stroke, water-cooled, power min. 53 kW (72 hp) at 2700 rpm, diesel parƟcle filter, Stage V, min. torque 232 Nm at 1500 rpm, torque increase 24%, maintenance interval 500 h

Drive system - Engine Engine type: Diesel Number of cylinders: 4 Exhaust emission: min. Stage V Min. Displacement: 2,615 cm³ Min Power: 53 kW (72 HP) @ 2,700 1/min Min. torque at speed: 225 Nm @ 1,600 1/min Torque rise: min. 24 % Min. Diesel tank capacity: 70 l Min. Hydraulic output: 40 l/min

Chassis and res DifferenƟal lock, front/rear axle Selectable Front steering, All-wheel steering, Rear steering, or Crab steering Max. Turning circle: 3,000 mm

Electrics Electrical system: 12 V, 130 A BaƩery capacity: 100 Ah

Li ing gears Front liŌing frame with side shiŌ Min. Side shiŌ leŌ 200 mm Min. Side shiŌ right: 200 mm Min. LiŌing capacity front: 1,300 kg Min. LiŌing capacity rear: 1,200 kg Relief and vibraƟon damping front

Dimensions Max. Length incl. liŌing gears: 3,550 mm Max. Width with single Ɵres: 1,890 mm Max. Height: 2,090 mm

Weights Max. Empty weight: 1,900 kg Max. Total weight: 3,500 kg Min. permissible front axle load: 1,900 kg Min. permissible rear axle load: 1,900 kg

Electrical system:

12 V, alternator 130 A, high-performance cold-start baƩery 100 Ah, baƩery disconnecƟon switch

Clutch:

1-plate dry clutch for independent PTO drive

Transmission:

Infinitely variable hydrostaƟc and power shiŌ able for travel drive at two speed levels

Speed:

slow range: 0-12 km/h fast range: 0-40 km/h the enƟre speed range must be without power transmission interrupƟon forwards and backwards selectable with the mulƟfuncƟonal driving lever

PTO:

standard profile 1 3/8", 6 splines, rear and front under load Switchable, speeds: front approx. 570 rpm, rear approx. 590 rpm, direcƟon of rotaƟon right (looking at cones)

Final drive:

All-wheel drive with differenƟal in both axles, front axle electro-hydraulically switchable, front axle pivoƟng, differenƟal rear and front locks electrohydraulically. switchable, 100% blocking effect

Steering:

HydrostaƟc all-wheel steering with Load sensing system, front steering must be preselectedable at the push of a buƩon, changing the steering type any with automaƟc detecƟon and synchronizaƟon of the wheel posiƟon via inducƟve sensors also while driving

Turning circle:

max. radius 3.0 m

Tires:

Equal or Terra profile or AS profile 31x15.50-15

Brakes:

Hydraulic 2-circuit servo foot brake acƟng on all wheels, addiƟonal hydrostaƟc driving brake, hand brake:

mechanical servo brake acƟng on rear wheels, parking lock, hill holder

Cabin:

LED lighƟng (driving lights) front and rear, anƟ-vibraƟon cushioned operator's plaƞorm, OECD-tested safety frame, curved windscreen, side window on the right, hinged rear window, plasƟc roof with integrated LED work lights, comfort seat with air suspension and electrical swivel device with safety belt, radio preparaƟon, dashboard with round instruments with analogue displays and color display, longitudinal and adjustable steering column, indicator lever with automaƟc reset, BoƩle holder, universal box, document compartment, holder for mobile telephone, 12 V socket

Hydraulic:

proporƟonal valves, approx. 40 l/min at 190 bar, oil supply approx. 12 l, oil quanƟty proporƟonally adjustable, 2 plug-in connecƟons at the front and rear for double acƟng cylinder with floaƟng posiƟon and seat valves (addiƟonal hydraulics 4DWAS-), actuaƟon via external control possible, for 6 plug-in clutches rear and front

Front hydraulics:

3-point Cat I, max. liŌing capacity 1300 kg, hydraulically on the side Can be moved approx. 200 mm to the leŌ or right, with quick connecƟon catch pockets and upper link, adjustable lowering throƩle, outer serves the funcƟons liŌing and lowering, self-regulaƟng relief, FloaƟng posiƟon and vibraƟon damping for road travel

Rear hydraulics:

3-point cat. I + II, liŌing capacity 1200 kg, stabilizaƟon chains, quick-change couplings and top links, adjustable lowering throƩle, external controls for liŌing and lowering funcƟons, liŌing rods with crank adjustment (adjustment range 100 mm), opƟon: self-adjusƟng end

Addi onal Requirements:

- Relief and vibraƟon damping for road travel

- Trailer coupling, diameter 26 mm, 27 cm above the ground, load unbraked 900 kg, braked 3500 kg

- Vehicle registraƟon papers, TUEV approval

- DirecƟon of rotaƟon of PTO shaŌ, right when looking at PTO shaŌ

- Full-view cabin with heaƟng, air condiƟoning and defroster system, including dust filter,

- Air suspension seat, suspension travel 80 mm, weight posiƟon, lumbar support and backrest angle adjustment, seat belt, electronically controlled swivel

- Radio DAB+/BLUETOOTH/USB

- RotaƟng beacon, yellow LED

- front lights, brake lights, blinkers according to StVZO

- Auxiliary hydraulics 10, front/rear, 1x da with float posiƟon and seat valves

- Unpressurized hydraulic tank return line, front

- Rear and crab steering (switchover at the push of a buƩon),

- Reversible fan

- Lashing eye aƩachment Ɵe down points, min. 4 ea.

- LED lighƟng for headlights front and rear

- LED work lights in front 2 ea.

- Rear working light, LED 1 ea.

- Trailer hitch with quick-release fastener, towing capacity unbraked 600 Kg, towing capacity braked (overrun brake system) 3.500 Kg

Flail mower type Vario, wear insert, 2nd oil circuit in the gearbox, working width 200 cm, special aƩachment bock cat. 1 front, made of fine-grain steel, gear with freewheel, side skids, Hammer fails for opƟmal shredding with self-sharpening cuƫng surface, built-in, bolted shark fin short chopping unit, self-cleaning support roller for height adjustment, Parking support, weight min. 555 kg, The mower must have the new, improved stone chip protecƟon according to ISO/WD 17101-2.

front PTO shaŌ.

Snow Blade V-Type snow blade, heavy duty, the two hydraulic folding wings of the snowplow must be adjustable individually and can be used in V- or Y-shape or in straight posiƟon.

Blade width 220 cm, blade height 74 cm, working width at the largest InclinaƟon approx. 190 cm, with 2 da hydraulic cylinders, 4 hydraulic hoses, 4 hydraulic couplings and 1 pressure less return. With Vulkollan scraper bars, 2 support feet, 1 spiral scraper bar, approx. 25° level posiƟvely adjustable scrapers (despite posiƟvely employed Scraper strips do not leave a central strip), 4 spring flaps with oil-damped gas pressure springs. (To protect the hydraulic cylinders and the vehicle.) The snowplow must be hydraulically swiveling with 2 hydraulic cylinders. With overpressure device and Vulkollan knife kit 220 cm, warning flags 2 ea., light kit, linkage mounƟng plate CAT 1.

Salt Spreader min. 560 liters with PTO drive, Slide open/close hydraulically EW, with electric remote control for joint adjustment of the spreading width limitaƟon on the leŌ and right, container cover on the top LiƩer apron 120 cm lighƟng Agitator for sand and wet salt

Warranty:

min. 12 month

Documenta on Manual, registraƟon paper, spare parts list

Training:

Training and instrucƟon of equipment on day of delivery or upon appointment in German language

Delivery:

USAG Ansbach DPW KaƩerbach Kaserne 91522 Ansbach