ITB2026-045_Chiller_Preventative_Maintenance.pdf

PDF 1 MB Posted

Attached to
Chiller Preventative Maintenance
Solicitation number
ITB2026-045
Issued by
St. Johns County, Florida

About this file

This Invitation to Bid (ITB2026-045) is issued by the School Board of St. Johns County, Florida for Chiller Preventative Maintenance services, including routine and emergency repair services and inspections on an as-needed basis. The bid solicits quarterly preventative maintenance, emergency and routine repair services, diagnostic services, and life-cycle assessments for water chiller equipment and related systems across multiple school facilities and locations. The successful bidder must have a minimum of five consecutive years of experience as an air conditioning contractor with technicians holding at least five years of HVAC experience and possessing a Class "A" HVAC Contractor's license and EPA 608 certification. The bid submission deadline is May 21, 2026, at 1:30 PM EST via the VendorLink portal, with a question deadline of May 6, 2026, at 12:00 PM EST. No pre-bid meeting is scheduled. The contract term runs from June 10, 2026, through June 9, 2027, with renewal options for up to three additional one-year periods. Award will be made to the lowest responsive and responsible bidder meeting specifications.

Pricing shall remain firm through the initial contract period, with any renewal price increases limited to the lesser of three percent or the Consumer Price Index for urban wage earners. The bidder must provide quarterly preventative maintenance pricing per unit, standard and non-standard hourly labor rates for technicians and helpers, and a materials markup not to exceed ten percent over cost. Emergency work must receive technician response within two hours of notification, while routine calls require response within twenty-four hours. The bidder is responsible for maintaining inventory of high-failure components, performing all required inspections and testing per manufacturer specifications, and providing detailed digital reporting within seven days of service completion. All products and parts must be new, unopened OEM components. The bidder must obtain all required licenses, permits, and certifications, and workers' compensation and commercial general liability insurance in the amounts specified are required. The School Board will make payment via Visa credit card on an immediate payment basis following authorized invoices submitted within thirty days of service completion.

View the file

Other files

File Type Posted
ITB2026045_Notice_of_Award.pdf PDF
ITB2026045_Notice_of_Intent.pdf PDF
ITB2026-045_Addendum_1.pdf PDF
ITB2026-045_Bid_Sheet.xlsx XLSX spreadsheet

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

St. Johns County School District Purchasing Department

40 Orange Street St. Augustine, Florida 32084

POSTING DATE:

April 24, 2026

PURCHASING DEPARTMENT CONTACT: Ian Ross Ian.Ross@stjohns.k12.fl.us

BID NUMBER AND TITLE:

ITB2026-045

Chiller Preventative Maintenance

BID DUE DATE AND TIME: May 21, 2026 @ 1:30 PM EST

All Bids must be received in the VendorLink portal, www.myvendorlink.com, by the Bid Due Date and Time

NOTE: RESPONSES RECEIVED AFTER THE DUE DATE AND TIME WILL NOT BE ACCEPTED

The public is invited to attend the bid opening at the above referenced Bid Due Date and Time which is publicly available and live streamed via Teleconference on Microsoft Teams. Click here to join the meeting or dial +1 904-420-0831, 415163149#

QUESTION DEADLINE: May 6, 2026 @ 12:00 PM EST Unless otherwise instructed through written addendum, questions and inquiries concerning this bid must be submitted online via VendorLink at www.myvendorlink.com by viewing bid details and clicking on “Ask a Question”. Questions and inquiries received after the said date and time will not be considered.

PRE-BID MEETING DATE & TIME: N/A

THE FOLLOWING MUST BE COMPLETED, SIGNED AND RETURNED AS PART OF YOUR RESPONSE. YOUR RESPONSE WILL NOT BE ACCEPTED WITHOUT THIS FORM, SIGNED BY AN AUTHORIZED AGENT OF THE CONTRACTOR.

LEGAL NAME OF COMPANY (AS REGISTERED in WWW.SUNBIZ.ORG OR AS REGISTERED IN YOUR STATE:

ADDRESS: ________________________________________________________________________________________

CITY, STATE, ZIP: __________________________________________________________________________________

FEDERAL EMPLOYEE IDENTIFICATION NUMBER (FEIN): _________________________________________________

TELEPHONE NUMBER: ____________________________ EMAIL: _________________________________________

By my signature, I certify that this offer is made without prior understanding, agreement, or connection with any corporation, firm, business entity or person submitting an offer for the same materials, supplies, equipment, or services, and is in all respects fair and without collusion or fraud. I further agree to abide by all terms, specifications and conditions of this invitation and certify that I am authorized by the offeror to sign this response.

AUTHORIZED SIGNATURE: __________________________________________________________________________

TYPED OR PRINTED NAME: _________________________________________________________________________

TITLE: __________________________________________________ DATE: __________________________________ http://www.myvendorlink.com/ https://teams.microsoft.com/l/meetup-join/19%3ameeting_ZTk1MWUzYjktMDE4ZS00OWYyLWFkZWQtYTg5NTA0MGFiYjkx%40thread.v2/0?context=%7b%22Tid%22%3a%22b3b3d057-fc12-4f3f-92f4-72be6e844351%22%2c%22Oid%22%3a%225e9cfe1d-7e8a-4f3a-9b88-03ed2dbbee29%22%7d http://www.myvendorlink.com/ http://www.sunbiz.org/

BID SUBMITTAL CHECKLIST

The following documents must be submitted as part of the bid submission:

Invitation to Bid and Contractor Acknowledgement Form Exhibit A – Drug Free Workplace Certification Exhibit B – Certification Regarding Debarment, Suspension Ineligibility, and

Voluntary Exclusion – Lower Tier Covered Transactions Exhibit C – Contractor’s Statement of Principal Place of Business Exhibit D – Conflict of Interest Exhibit E – Foreign Country of Concern Attestation Exhibit F – Byrd Anti-Lobbying Amendment Certification Exhibit G – Federal Grant Terms and Conditions Exhibit H – Affidavit Regarding the Use of Coercion for Labor or Services Exhibit I – Reference Form Active Status:

- If a Florida Corporation, a screenshot of “ACTIVE” status through www.sunbiz.org

- If a Non-Florida Corporation, a screenshot of “ACTIVE” status from the state in which the business was formed

Certificate of Insurance Bid Sheet – Submitted as an Excel file (.xls or .xlsx)

THE INVITATION TO BID AND CONTRACTOR ACKNOWLEDGEMENT FORM, AND

ALL EXHIBITS MUST BE SIGNED AND SUBMITTED BY AN AUTHORIZED

REPRESENTATIVE OF THE BIDDER. ADDITIONALLY, THE BID SHEET MUST BE

SUBMITTED AS AN EXCEL FILE. FAILURE TO COMPLY WITH THESE

REQUIREMENTS MAY RENDER THE BID NON-RESPONSIVE.

ITB2026-045 Chiller Preventative Maintenance http://www.sunbiz.org/

I. SCOPE OF WORK/SPECIFICATIONS

1. SCOPE:

The purpose of this Bid is to establish a contract for firm pricing for Chiller Preventative Maintenance, routine and emergency repair services, and inspections for the School Board of St. Johns County, Florida (hereinafter referred to as “School Board” or “SCJSD”) on an as needed basis. The Bidder will be responsible for meeting all specifications as outlined herein and on the Bid Sheet. Failure to comply with these requirements may be cause for Bid rejection or termination of award.

The successful Bidder is responsible for supplying at its own expense, all supervision, labor, equipment, machines, tools, materials, transportation, incidentals and related items necessary to complete the work in accordance with this Bid. Work shall be performed by qualified and trained service personnel.

2. QUALIFICATIONS:

A. The successful Bidder shall have a minimum of five (5) consecutive years’ experience as an air conditioner contractor. Bidders’ technicians responsible for hands-on maintenance and repairs shall have a minimum of five (5) years’ experience as an HVAC mechanic and be proficient in the maintenance of chiller equipment.

B. The successful Bidder shall possess at a minimum, the following:

i. A Class “A” HVAC Contractor’s license and EPA 608 certification.

ii. Certification by the Florida Secretary of State to conduct business in the State of

Florida and St. Johns County, Florida.

iii. Any additional necessary permits and/or licenses required to conduct the work herein.

3. SERVICE REQUIREMENTS:

A. The successful Bidder shall quarterly inspect all water chiller equipment and its operation, and as needed adjust, lubricate, clean, repair, or replace parts to maintain proper and safe operation in accordance with Original Equipment Manufacturer (OEM) specifications. The Bid Sheet includes a list of schools and facilities, the manufacturer, model number and serial number of existing units included in this Bid.

B. The successful Bidder shall, at its own expense, maintain an adequate and readily accessible inventory of all high failure, high-wear, and mission critical components associated with the equipment and systems in use by the School Board. Inventory levels shall be sufficient to prevent service interruptions, and support emergency response requirements.

C. All services shall be conducted in accordance with the Environmental Protection Agency (EPA), American Society of Mechanical Engineers (ASME), American National Standards institute (ANSI), American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE), federal, state, and local regulations or ordinances and requirements of the School Board. If there is a conflict in the specifications, the most stringent specifications shall prevail.

ITB2026-045 Chiller Preventative Maintenance

D. All permits and any licenses for chemicals and refrigerants that are required by regulatory agencies in compliance with the Florida Mechanical Building Codes current edition, EPA, and OSHA are the responsibility of the successful Bidder.

E. Services shall follow manufacturer’s specifications with parts, materials, and components operating safely and efficiently as designed. All products and parts shall be new, unopened packaging OEM parts and covered under the manufacturer’s standard warranty.

F. Successful Bidder shall take field measurements and verify field conditions. Errors, inconsistencies, or omissions discovered shall be reported to SJCSD before work begins. Failure to report such conflicts will require the successful Bidder to correct the issue at their own expense.

G. Successful Bidder shall provide all chemicals materials safety data sheets (MSDS) to an authorized School Board representative for pre-approval.

H. The successful Bidder shall assume that none of the covered equipment is under warranty and is solely responsible for all covered equipment from the contract’s effective date.

I. The successful Bidder shall have sixty (60) days to survey all the units and provide a list of any major deficiencies for each individual unit. This will be followed by Purchase Orders to fix the deficient items and/or bring the unit up to current code.

These units will be excluded from the agreement until SJCSD moves forward with the repairs. Once the repairs are complete, they will fully be covered under the maintenance agreement.

4. REPORTING AND DOCUMENTATION:

A. Digital reports shall be provided to the SJCSD Director of Maintenance or designee upon completion of the initial assessment, at the end of all quarterly maintenance visits, and for all repairs and emergency service calls. Reports shall be submitted to the Director for Maintenance no later than seven (7) calendar days after completion of the service.

i. Documentation for quarterly preventative maintenance visits shall include a confirmation of all services rendered, the condition of the equipment, all deficiencies found, and any deficiencies noted during inspection that could not be corrected immediately.

ii. The fourth quarterly preventative maintenance visit shall include a life cycle assessment of all equipment covered in this bid and must be either provided directly to the SJCSD Director for Maintenance or designee. Until such time as the School Board implements an asset management system capable of tracking full asset life-cycle data, the successful Bidder shall be responsible for developing, maintaining, and updating life-cycle assessments for all major equipment. Life-cycle data shall include, at a minimum, installation date, expected useful life, maintenance history, warranty information, and replacement projections, and shall align with the reporting requirements identified above.

All life-cycle data must be maintained in a non-proprietary format and shall not be subject to any restrictions that would limit the School Board’s access, review, or use of the data. Upon request, the successful Bidder shall provide the data promptly for review and/or for direct import into the School Board’s asset management system once implemented.

iii. Documentation for any repairs performed shall include the following:

• Company name, contact person, and phone number.

• Type, brand, model and/or serial number of the equipment.

• Proposal number.

• Summary of repair work.

• The name(s) of the technician that performed the work and the associated date(s) and times(s) the work was performed.

• Parts and materials used. The School Board is not responsible for paying for labor performed on School Board equipment due to a misdiagnosis.

5. PREVENTATIVE MAINTENANCE:

A. The successful Bidder shall perform quarterly preventative maintenance on each chiller system. Quarterly preventative maintenance shall occur on an agreed upon schedule established at the start of every contract year. Inspection dates shall be set at the sole discretion of the School Board.

B. Preventative Maintenance shall not unreasonably impede, interfere, or delay operations or activities at any schools or facilities and may be required to be performed before or after school hours or weekends.

C. All inspections and maintenance activities shall comply with the equipment manufacturer’s procedures and specifications. The successful Bidder shall ensure each chiller system is fully inspected, tested, cleaned, and maintained to support continuous operation and proper functionality of all units.

D. If testing shows the system is defective or operating inadequately, the successful Bidder’s technician shall immediately notify the School Board representative when a repair beyond routine preventative maintenance is required. If a repair is necessary to keep the chiller operational, the successful Bidder shall provide an estimate to the School Board representative within twenty-four (24) hours of the notification. If the issue is identified on a Friday or the day before a holiday, the estimate shall be provided within seventy-two (72) hours.

E. All current equipment is listed on the Bid Sheet. Facilities and/or water chiller equipment may be added to or removed from this contract at the sole discretion of the School Board. Additional units may be added at a negotiated rate between the School Board and successful Bidder. If a facility or piece of equipment is removed, the successful Bidder shall receive thirty (30) days’ written notice, and the corresponding fee for that facility shall be deducted from future payments.

F. Centrifugal Chillers

i. Quarterly Maintenance: Preventative maintenance shall be performed every ninety (90) days and shall include, at a minimum, the tasks listed below:

• Furnish materials for a thorough leak test as required.

• Perform leak test and report on any discrepancies found.

• Check and calibrate safety controls per manufacturer’s recommendations.

• Megohm check compressor and oil pump motor and record findings.

• Check starter as required by manufacturer including but not limited to:

a. Condition of starter contacts (for wear and pitting).

b. Check starter overload devices and settings as applicable.

c. Tighten starter contacts and motor terminal connections.

• Change oil and filters as required when the oil analysis results indicate that change is required or by manufacturer recommendations.

• Check operation of vane positioning.

• Inspect and check purge unit.

• Restore unit to operation.

• Perform service on purge system per manufacturer’s recommendations.

• Perform log of equipment.

• Perform minor adjustments.

• Annual Oil Analysis: In addition to the required quarterly maintenance, an annual oil analysis shall be performed during the first quarterly inspection of each contract year. Oil samples will be collected by the successful Bidder and analyzed by a professional laboratory specializing in the analysis of samples taken from refrigeration equipment. A trend report summarizing the last sample and all other available samples will be submitted following each sample taken. This annual oil analysis must be included in the successful Bidder’s bid price.

G. Air Cooled Chillers

i. Quarterly Maintenance: Preventative maintenance shall be performed every ninety (90) days and shall include all manufacturer-recommended services and testing. At a minimum, and in addition to the manufacturer’s recommendations, the successful Bidder shall perform the services listed below:

• Furnish materials for a thorough leak test as required.

• Perform leak test and report any discrepancies found.

• Check and calibrate safety controls as applicable.

• Take megohm reading of compressor and oil pump motor and record findings.

• Check starter as required by manufacturer including but not limited to:

a. Condition of starter contracts (for wear and pitting).

b. Starter overload devices and settings as applicable.

c. Tighten starter contacts and motor terminal connections.

• Take samples of oil and have analyzed by a professional laboratory specializing in analysis of refrigeration equipment oil and refrigerant samples.

• Change oil and filters as required when the oil analysis results indicate that change is required or by manufacturer recommendations.

• Check operation of slide positioned or unloaders.

• Test and inspect purge unit.

• Lube condenser fan motors and bearings as required.

• Inspect outside coils for dirt and clean as required.

• Restore unit to operation.

• Perform minor adjustments.

• Annual Oil Analysis: In addition to the required quarterly maintenance, an annual oil analysis shall be performed during the first quarterly inspection of each contract year. Oil samples will be collected by the successful Bidder and analyzed by a professional laboratory specializing in the analysis of samples taken from refrigeration equipment. A trend report summarizing the last sample and all other available samples will be submitted following each sample taken. This annual oil analysis must be included in the successful Bidder’s bid price.

H. Reciprocating/Scroll/Screw/Centrifugal Equipment

i. Quarterly Maintenance: Preventative maintenance shall be performed every ninety (90) days and shall include all manufacturer-recommended services and testing. At a minimum, and in addition to the manufacturer’s recommendations, the successful Bidder shall perform the services listed below:

• Check unit thoroughly for refrigerant leaks.

• Check and calibrate safety and operating controls.

• Megohm test compressor motor.

• Check and tighten all electrical terminals and check contacts for wear.

• Check oil level in compressor and add as required.

• Tighten motor terminals and control panel terminals.

• Check crankcase heater.

• Check external interlocks, flow switches, pumps, and fans.

• Check oil sample for acid.

• Verify un-loaders operate properly (if applicable).

• Air Cooled Items:

a. Inspect condenser fans and coils.

b. Lube condenser fan motors and bearings as required.

c. Inspect outside coils for dirt and brush and clean as required.

d. Wash coils as needed.

• Water Cooled Items: Brush condenser tubes (to be performed annually during the first quarterly inspection of the contract year).

I. Cooling Towers

i. Quarterly Maintenance – Preventative maintenance shall be performed every ninety (90) days and shall include all manufacturer-recommended services and testing. At a minimum, and in addition to the manufacturer’s recommendations, the successful Bidder shall perform the services listed below:

• Clean debris from platform and surrounding area.

• Clean water sump and check condition.

• Clean float valve assembly and adjust for proper operation.

• Check and clean bleed offline and overflow.

• Clean tower strainers.

• Spray/wash the outside surface of cooling tower fill material.

• Clean tower spray nozzles and eliminators.

• Check sump heaters and thermostats for calibration and operation.

• Lubricate fan motor bearings per manufacturer’s recommendation.

• Fill system after cooling tower has been cleaned.

• Check for leaks.

• Check amperage on motors.

• Inspect electrical connections, contactors, relays, and operating safety controls.

• Check and adjust condenser water temperature regulator system.

• Flush cooling tower after cleaning (to be performed annually during the first quarterly inspection of the contract year).

J. Pumps

i. Quarterly Maintenance: Preventative maintenance shall be performed every ninety (90) days and shall include, at a minimum, the tasks listed below:

• Clean pump strainers.

• Lubricate pump bearings per manufacturer’s recommendations.

• Lubricate motor bearings per manufacturer’s recommendations.

• Tighten all nuts and bolts. Check motor mounts and vibration pads.

• Visually check pump alignment and coupling.

• Check motor operating conditions.

• Inspect electrical connections and contactors.

• Inspect and clean strainers and hand valves.

• Inspect mechanical seals or pump packing.

K. Media Fill Cleaning

i. Quarterly Maintenance – Preventative maintenance shall be performed every ninety (90) days and shall include, at a minimum, the tasks listed below:

• Rinsing with water

• Brushing loose debris

• Clearing small blockages and removing leaves/organic buildup nearby

ii. Chemical cleaning of non-removable and removable fill, removing scale, biofilm, algae, and debris form the fill media inside a cooling tower (to be performed annually during the first quarterly inspection of the contract year). The successful Bidder is allowed to use chemical detergent such as Goodway and Rydlyme or equivalent with the approval of an authorized School Board representative.

6. REPAIRS:

A. During the equipment’s service life, the School Board may request repairs, including diagnostic services. The successful Bidder shall acknowledge each request, in writing or by phone, within twenty-four (24) business hours of notification. When required, the Bidder shall troubleshoot and diagnose the issue and provide a cost estimate, as outlined below, for restoring the equipment to full operational service.

All cost estimates shall include the following details:

i. Type, brand, model and/or serial number of the Chiller.

ii. Name of technician.

iii. A unique proposal/estimate number (assigned by the successful Bidder).

iv. Date inspected.

v. Date cost estimate was prepared.

vi. Diagnosis.

vii. Parts required, and direct costs plus the successful Bidder’s markup over cost of additional materials as identified on the Bid Sheet.

viii. Labor – Number of hours required to perform work and the cost per hour as identified on the Bid Sheet.

ix. Timeframe for completion of repairs.

x. Total price.

B. If deficiencies are found during inspection, the successful Bidder may proceed with repairs costing up to $250. For repairs estimated to exceed $250, the successful Bidder shall submit a proposal and cost estimate and contact the School Board for approval. Written quotes may only be authorized by the SJCSD Director of Maintenance or designee for repairs, and no repairs shall be conducted without said authorization. After completing any authorized repair, the successful Bidder shall provide a report as outlined in section 4.

C. Service calls shall be dispatched by an authorized School Board representative.

The successful Bidder shall respond to emergency requests and report to the job site within one (1) hour of notification.

D. For each project covered by this agreement, the Contractor shall submit an itemized “Not to Exceed” price giving a full description of the project prior to issuance of a purchase order.

E. The Successful Bidder shall note the School Board representative’s name that is authorizing the work.

F. Copies of each of the above will be attached to and accompany the invoices.

G. The successful Bidder may proceed with repairs only after quote approval and issuance of a purchase order. All work shall be completed within the approved timeframe and limited to the scope of the approved quote. All installed parts shall be new OEM components or approved equals, and any non-OEM parts require prior approval from an authorized School Board representative. The successful Bidder shall ensure repairs restore the equipment to proper operation. The School Board will not pay for labor, parts, or materials resulting from misdiagnosis.

7. FINAL INSPECTION

A. Successful Bidder may be required to conduct a final inspection accompanied by an authorized School Board representative and develop a list of items that require correction and completion.

B. The Successful Bidder shall correct any defective work or finish and complete any additional work within five (5) business days after final inspection.

C. Completion of all outstanding items shall be at the successful Bidder’s expense as determined to be reasonable by the School Board.

8. BID PRICING:

Bidders are required to complete and submit the fillable Bid Sheet in its original Excel format as provided on VendorLink. Submission of the fillable Bid Sheet in any format other than Excel may result in the bid being deemed non-responsive and rejected without further review.

A. Quarterly Preventative Maintenance. For Quarterly Preventative Maintenance, Section A, a quarterly Price per Unit is required. Bidders must provide a price for all units in this section for consideration.

B. Other Work. For Other Work, Section B, Bidders must provide a price for all lines in this section for consideration. This includes:

i. Standard Hourly Rate for Technician and Helper

ii. Non-Standard Hourly Rate for Technician and Helper

iii. Percentage Markup over cost for all materials, supplies and equipment for other work (not to exceed 10%).

(Remainder of page intentionally left blank)

II. GENERAL TERMS AND CONDITIONS

1. DEFINITIONS:

a) The School Board of St. Johns County may be referred to as “Board,” “School Board,” or “St. Johns County School District” herein.

b) Bidder. For this Invitation to Bid (ITB), the word “Bidder” shall have the same meaning as “Contractor,” “Proposer,” “Respondent,” and “Vendor,” who submits a written response to this ITB; and shall have the same meaning for any successful awardee(s) hereunder.

c) Purchasing Department Representative refers to the Purchasing Department staff member named as its contact on the Invitation to Bid Contractor Acknowledgement Form.

d) Conditions. For this ITB, the word “Conditions” refers to both the General Conditions and the Special Conditions of this ITB.

e) Solicitation. This Invitation to Bid document.

2. EXECUTION OF BID: Each Bid submittal must include the signature of an officer or employee having the authority to bind the Bidder in the space(s) provided. Only the terms and conditions of this Bid, as released by the School Board or amended via addendum, are valid. The ITB General Conditions, Special Conditions and specifications cannot be changed or altered in any way by the Bidder. Any failure to comply with the ITB Conditions or specifications or attempt to alter them by the Bidder shall be grounds for rejection of the Bid.

3. SUBMISSION OF BID: Bid submittals are due at the date, time, and location indicated on the Invitation to Bid Contractor Acknowledgement Form or as amended in the form of an addendum issued by the Purchasing Department.

All solicitations and supporting documents will be posted on VendorLink and this link is available on the St.

Johns County School District website at www.stjohns.k12.fl.us/purchasing/active/. It is the sole responsibility of Bidders to monitor VendorLink for solicitation opportunities and updates.

Unless otherwise indicated, it is the sole responsibility of the Bidder to ensure that their Bid response is submitted through VendorLink no later than the time and date specified in the Bid or subsequent addenda.

The Bidder is responsible for allowing adequate time to upload their submittal on VendorLink. If technical difficulties arise during the submission of the Bid response, it is the Bidder’s responsibility to contact VendorLink technical support at support@vendorlink.com. The School Board shall not be responsible for delays caused by any occurrence. Submittals sent by mail, facsimile, electronic mail, telephone, or any other means not specified herein will not be accepted. Bid submittals may not be withdrawn after the bid due date.

Acceptable file formats for upload are Microsoft Excel (.xls or .xlsx), Adobe Portable Document (.pdf), or .ZIP file formats and printing must be enabled on all files submitted.

Bids not conforming to the instructions provided herein will be subject to disqualification at the sole discretion of the School Board.

Any Bid may be withdrawn prior to the date and time the Bids are due. Any Bid not withdrawn will constitute an irrevocable offer for a period of 90 days, to provide the School Board with goods or services specified in the Bid.

4. REQUESTS FOR CLARIFICATION: No interpretation of the meaning of this Bid document or correction or clarification of any ambiguity, inconsistency, or error therein will be made verbally to any party. All requests for an interpretation or clarification of this Bid and any subsequent addenda, or correction of any apparent ambiguity, inconsistency, or error will be addressed in writing by the Purchasing Department Representative of the School Board. Interpretation of the Bid, clarification of Bid specifications, and changes to the Bid shall be communicated by written addenda only. Only the written interpretation or correction given by the Purchasing Department Representative shall be binding. Bidders are advised that no other source is authorized to interpret, explain, clarify, or give information regarding the Bid documents.

5. SPECIAL CONDITIONS: The Purchasing Department has the authority to issue Special Conditions or Specifications as required for a particular ITB. Any Special Conditions or Specifications that vary from these General Conditions shall take precedence over the General Conditions.

ITB2026-045 Chiller Preventative Maintenance http://www.stjohns.k12.fl.us/purchasing/active/ mailto:support@vendorlink.com

6. PRICES QUOTED: Deduct trade discounts and quote a firm net price. Give both unit price and aggregate total. Prices must be stated in units to quantity specified in the ITB. In case of discrepancy in computing the amount of the Bid, the Unit Price quoted will govern. All prices quoted shall be F.O.B. destination, freight prepaid, and shall include all cartage, drayage, packing, etc., delivered to and unloaded at the receiving site designated on the purchase order. Bidder is responsible for freight charges. Bidder owns goods in transit and files any claims, unless otherwise stated in Special Conditions. Each item must be proposed separately, and no attempt is to be made to tie any item or items in with any other item or items. If a Bidder offers a discount or offers terms less than Net 30, it is understood that a minimum of thirty (30) days will be required for payment. If a payment discount is offered, the discount time will be computed from the date of satisfactory delivery at place of acceptance and receipt of correct invoice at the office specified.

a) Taxes. The School Board does not pay Federal excise and State taxes on direct purchase of tangible personal property. The applicable tax exemption number is shown on the purchase order. This exemption does not apply to purchases of tangible personal property made by Bidders who use the tangible personal property in the performance of contracts for the improvement of School Board-owned real property as defined in Chapter 192 of the Florida Statutes.

b) Mistakes. Bidders are expected to examine the General and Special Conditions, specifications, delivery schedules, Bid prices and extensions, and all instructions pertaining to supplies and services. Failure to do so will be at Bidder’s risk.

c) Conditions and Packaging. It is understood and agreed that any item offered or shipped as a result of this ITB shall be new (current production model at the time of this ITB) unless otherwise stated. All containers shall be suitable for storage or shipment, and all prices shall include standard commercial packaging.

d) Underwriters’ Laboratories. Unless otherwise stipulated in the ITB, all manufactured items and fabricated assemblies shall be U.L. listed where such has been established by U.L. for the item(s) offered and furnished. In lieu of the U.L. listing, Bidder may substitute a listing by an independent testing laboratory recognized by OSHA under the Nationally Recognized Testing Laboratories (NRTL) Recognition Program.

e) Preference for St. Johns County Bidders. For all purchases made by the School Board, prices and quality being equal, preference may be given to St. Johns County Bidders, subject to certification as a drug-free workplace (Florida Statutes 287.087 and 287.084).

7. BRAND NAMES: The School Board reserves the right to invite Bids for a particular product or specific equipment by manufacturer, make, model, or other identifying information. However, a Bidder may propose a substitute product of equal quality and functionality unless the Conditions or specifications state that substitute products or equipment may not be proposed and will not be considered. If a substitute product is proposed, it is the Bidder’s responsibility to submit with the Bid, brochures, samples, and/or detailed specifications on the substitute product. The School Board shall be the sole judge in the exercise of its discretion for determining whether the substitute product is equal and acceptable.

8. QUALITY: The items proposed must be new and equal to or exceed specifications. The manufacturer’s standard warranty shall apply. During the warranty period, the successful Bidder must repair and/or replace the unit without cost to the School Board with the understanding that all replacements shall carry the same warranty as the original equipment. The successful Bidder shall make any such repairs and/or replacements immediately upon receiving notice from the School Board.

9. SAMPLES: Samples of items, when required, must be furnished free of expense by the ITB due date unless otherwise stated. If not destroyed, upon request, samples will be returned at the Bidder’s expense. Bidders will be responsible for the removal of all samples furnished within thirty (30) days after ITB opening. All samples will be disposed of after thirty (30) days. Each individual sample must be labeled with Bidder’s name, ITB number, and item number. Failure of Bidder to either deliver required samples or to clearly identify samples as indicated may be reason for rejection of the ITB. Unless otherwise indicated, samples should be delivered to the Purchasing Department of the St. Johns County School Board, 40 Orange Street, St.

Augustine, FL 32084.

10. TESTING: Items proposed may be tested for compliance with ITB Conditions and specifications.

11. NON-CONFORMITY: Items delivered that do not conform to ITB Conditions or specifications may be rejected and returned at Bidder’s expense. Goods or services not delivered as per delivery date in ITB and/or purchase order may be purchased on the open market. The Bidder shall be responsible for any additional cost. Any violation of these stipulations may also result in Bidder being disqualified from participating in future competitive solicitations or otherwise doing business with the School Board.

12. DELIVERY: Unless actual date of delivery is specified (or if specified delivery cannot be met), the Bid must show the number of days required to make delivery after receipt of purchase order in space provided. Delivery time may become a basis for recommending an award (see Special Conditions).

13. DISPUTE: Any dispute concerning the Conditions or specifications of this ITB or the contract resulting from this ITB shall be decided by the Purchasing Department and that decision shall be final.

14. AWARDS: Bids shall be reviewed in accordance with the ITB Conditions and specifications and the best interest of the School Board. To that end, the Board reserves the right to accept the Bid of any firm to be in the best interest of the School Board; reject any and all Bids; to withdraw the Bid or portions thereof, without penalty; to waive any irregularities or informalities; to accept any item or group of items; to require additional information or clarification from any Bid including audited and unaudited financial statements; to conduct interviews with any of the Bidders and to require a formal presentation by any of the Bidders; to acquire additional quantities at prices quoted in the Bid unless additional quantities are not acceptable, in which case the Bid must be conspicuously labelled “BID IS FOR SPECIFIED QUANTITY ONLY”, and to purchase the product or service at the price and terms of any contract with a governmental entity procured by competitive solicitation, in accordance with Florida law. The decision to award a contract or take other action in regard to the ITB shall be made in the best interest of the School Board.

15. OTHER GOVERNMENTAL AGENCIES: With the consent and agreement of the Bidder, purchases may be made under this Bid by other governmental agencies, political subdivisions within the state of Florida, or any other public entity. Such purchases shall be governed by the same terms and conditions as stated herein.

Further, it is understood that each agency will issue its own purchase order to the Bidder.

16. MARKING: A packing list must be included in each shipment and shall show the School Board purchase order number, ITB number, school name or department name, contents, and shipper's name and address;

mark packing list and invoice covering final shipment "Order Completed". If no packing list accompanies the shipment, the buyer’s count will be accepted. Mark each package clearly with (A) shipper's name and address, (B) contents, (C) the School Board of St. Johns County purchase order number, and (D) ITB number.

17. INSPECTION, ACCEPTANCE & TITLE: Inspection and acceptance will be at destination shown on purchase order unless otherwise provided. Title to and risk of loss or damage to all items shall be the responsibility of the successful Bidder until acceptance by the School Board. The School Board will have the right to inspect and test any of the goods or services covered under this Bid upon arrival or completion. If rejected, they will be held for disposal at the Bidder’s risk. Such inspection, or the waiver thereof, however, will not relieve the Bidder from full responsibility for furnishing goods or work conforming to the requirements of this Bid or Bid Specifications, and will not prejudice any claim, right, or privilege the School Board may have because of the use of defective or unsatisfactory goods or work. If the materials or services supplied to the School Board are found to be defective or do not conform to specifications, the School Board reserves the right to cancel the order upon written notice to the Bidder and return product at Bidder’s expense.

18. BILLING AND PAYMENT: Invoices, unless otherwise indicated, must show purchase order numbers and shall be submitted to St. Johns County School District, Accounts Payable Department, 40 Orange Street, St.

Augustine, FL 32084. It is the sole responsibility of the Bidder to ensure that an invoice corresponds to its applicable purchase order and to resolve any discrepancies by notifying the point of contact person listed on the purchase order before submitting the invoice for payment. Any invoice submitted as a result of this award shall be itemized matching the items on the purchase order. “Lump sum” invoices shall not be submitted and will not be accepted for multiple line purchase orders.

Payment will be made after the commodities or contractual services provided by the Bidder have been received, inspected, and found to comply with award specifications, free of damage or defect, as prescribed in the Special Conditions and properly invoiced.

19. COPYRIGHT AND PATENT RIGHTS: The Bidder, without exception, shall indemnify and hold harmless the School Board and its employees from liability of any nature or kind, including legal fees and other costs and expenses, for or on account of any copyrighted, patented, or unpatented invention, process, or article manufactured or used in the performance of the contract, including its use by the School Board. If the Bidder uses any design, device, or materials covered by letters, patent, or copyright, it is mutually understood and agreed without exception that the Bid prices shall include all royalties or cost arising from the use of such design, device, or materials in any way involved in the work.

20. OSHA: The Bidder warrants that the product supplied to the School Board shall conform in all respects to the standards set forth in the Occupational Safety and Health Act of 1970, as amended, and the failure to comply with this condition will constitute a breach of contract.

21. LEGAL REQUIREMENTS: Bidders are required to be familiar with all Federal, State, and local laws, ordinances, rules and regulations that may affect their work in any manner including St. Johns County School Board Rules which are available for review at www.stjohns.k12.fl.us/board/rules/. Failure on the part of the Bidder to be aware of any law, ordinance, rule or regulation will in no way relieve them of any responsibility or liability arising from the contract award. The Bidder assures and certifies that they will comply with all laws, ordinances, rules, regulations, and all other legal requirements. Any fines levied due to inadequacies or failure to comply with all requirements shall be the sole responsibility of the Bidder.

22. CONFLICT OF INTEREST: In addition to complete adherence of Chapter 112, Florida Statutes, all Bidders must disclose with their Bid the name of any officer, director, or agent who is also an employee of the School Board, who knowingly owns, directly or indirectly, any interest of any amount in Bidder’s company, firm or business, or who derives income of any kind from Bidder’s company, firm or business.

23. ANTI-DISCRIMINATION: The Bidder certifies that Bidder is in compliance with the requirements of law regarding equal employment opportunity for all persons without regard to age, race, color, religion, sex, national origin,disability, or any other reason prohibited by law.

24. LICENSES AND PERMITS: The Bidder shall be responsible for obtaining, at its expense, all licenses and permits required for performance of the work or services resulting from the ITB award.

25. BID BONDS, PERFORMANCE BONDS, CERTIFICATES OF INSURANCE: Bid bonds, when required, shall be submitted with the Bid in the amount specified in Special Conditions. Bid bonds will be returned to unsuccessful Bidders. After acceptance of Bid, the School Board will notify the successful Bidder to submit a performance bond and certificate of insurance in the amount specified in Special Conditions. St. Johns County School Board shall be named as additional insured on policies required by detailed specifications.

Upon receipt of the performance bond, the Bid bond will be returned to the successful Bidder.

26. DEFAULT AND REMEDIES: The following remedies for default shall apply:

a) Failure to Timely Deliver. The parties acknowledge and agree that the damages for the failure of the successful Bidder to timely deliver the products or services contracted for may be difficult to determine.

Moreover, both parties wish to avoid lengthy delay and expensive litigation relating to the failure of the successful Bidder to deliver on time. Therefore, in the event the successful Bidder fails to timely deliver the products or services contracted for, the School Board may exercise the remedy of liquidated damages against the successful Bidder in an amount equal to 25% of the unit price Bid, times the quantity. The successful Bidder shall pay that sum to the School Board not as a penalty, but as liquidated damages intended to compensate for unknown and unascertainable damages.

b) Other Default. In the event of default for any reason other than the failure of the successful Bidder to timely deliver the products or services contracted for, the School Board may exercise any and all remedies in contract or tort available to it, including, but not limited to, the recovery of actual and consequential damages.

27. TERMINATION: In the event any of the provisions of this ITB are violated by the Bidder, the Purchasing Department reserves the right to reject its Bid. Furthermore, the School Board reserves the right to terminate any contract resulting from this ITB for financial or administrative convenience, as determined in its sole business judgment, upon giving thirty (30) days prior written notice to the other party.

28. FACILITIES: The School Board reserves the right to inspect the Bidder’s facilities at any time with prior notice.

29. ASBESTOS STATEMENT: All material supplied to the School Board must be 100% asbestos free. Bidder by virtue of proposing, certifies by signing Bid, that if awarded any portion of this Bid, will supply only material or equipment that is 100% asbestos free.

30. INDEMNITY AND HOLD HARMLESS AGREEMENT: During the term of this Bid and any contract awarded to Bidder as a result of this ITB, the Bidder shall indemnify, hold harmless, and defend the School Board, its agents, and employees from any and all costs and expenses, including but not limited to, attorney’s fees, reasonable investigative and recovery costs, court costs and all other sums which the Board, its agents, servants and employees, may pay or become obligated to pay on account of any, all and every claim or demand, or assertion of liability, or any claim or actions founded, thereon, arising or alleged to have arisen

ITB2026-045 Chiller Preventative Maintenance http://www.stjohns.k12.fl.us/board/rules/ out of the products, goods or services furnished by the Bidder, its agents, or employees, or any of its equipment, including, without limitation, claims for damages, injury to person or property, including the Board’s property, or death.

31. CRIMINAL BACKGROUND SCREENING: Pursuant to Florida Statute 1012.467 and School Board Rule 7.142, the School Board will issue and recognize statewide background badges to non-instructional employees of the successful Bidder who meet the clearance requirements of Florida Statute 1012.467(2)(g) when it is not anticipated that they will come into direct contact with students. However, pursuant to Florida Statute 1012.467 and School Board Rule 7.142, if the School Board is unable to rule out that Bidder’s employees or subcontractors may come into contact with students, then, in the paramount interest of student safety, the employees will be required to undergo and pass background screening in accordance with School Board Rule 7.142, unless another statutory exemption applies.

For this ITB:

A. ☐ Student contact not anticipated B. ☒ Student contact anticipated

If Box A is checked, statewide badge will be recognized or issued, if requested and the Bidder meets clearance requirements.

If Box B is checked, background screening pursuant to School Board Rule 7.142(4) will be required.

The Bidder acknowledges and agrees to comply with the requirements of School Board Rule 7.142.

Bidder shall be responsible for the expense of the background screening of its employees.

32. VENUE: Any suit, action, or other legal proceedings arising out of or relating to any contract awarded based upon this ITB shall be brought in a court of competent jurisdiction in St. Johns County, Florida. The parties waive any right to require that a suit, action, or proceeding arising out of this Agreement be brought in any other jurisdiciton or venue.

33. WAIVER OF JURY TRIAL: The parties knowingly, voluntarily, and intentionally waive their right to trial by jury with respect to any litigation arising out of, under, or in connection with this ITB or any contract awarded upon this ITB. This provision is a material inducement for the School Board to enter into a contract with the successful Bidder.

34. NO CONTACT PERIOD/LOBBYING: A No Contact Period shall commence on the initial release date of this Bid and continue through and include the date the School Board makes its determination to approve or reject the final recommendations. During the No Contact Period, no lobbyist, business associate, business entity, vendor, or other people may lobby or contact a Board member, the Superintendent, or any School Board employee on behalf of the Bidder, except (a) any designated Purchasing Department Contact or Official who may be identified in the procurement document for purposes of receiving questions or clarifications or for receiving bid protests; and (b) a Board member, the Superintendent, or any School Board employee who is contacted on issues or matters unrelated to the procurement of goods or services which are subject to the No Contact Period.

Failure to meet any of these requirements may disqualify the Bidder from consideration.

35. ASSIGNMENTS: The successful Bidder may not sell, assign or transfer any of its rights, duties or obligations under Bid contract without the prior written consent of the School Board.

36. PROTEST: Failure to give notice or file a protest within the time prescribed in Section 120.57 (3), Florida

Statutes, shall constitute a waiver of any protest.

37. COMPLIANCE WITH FEDERAL REGULATIONS: All contracts involving Federal funds will contain certain provisions required by applicable sections of Title 34, Section 80.36(I) and 85.510, Code of Federal Regulations and are included by reference herein.

38. PUBLIC ENTITY CRIME: Pursuant to Florida Statute 287.133, a person or affiliate who has been placed on the convicted vendor list following a conviction for a public entity crime may not submit a Bid on a contract to provide any goods or services to a public entity, may not submit a Bid on a contract with a public entity for the construction or repair of a public building or public work, may not submit Bids on leases of real property to a public entity, may not be awarded or perform work as a contractor, supplier, subcontractor, or consultant under a contract with any public entity, and may not transact business with any public entity in excess of the threshold amount provided in Section 287.017 of Florida Statute, for CATEGORY TWO for a period of thirty-six (36) months from the date of being placed on the convicted vendor list.

39. COLLECTION, USE, OR RELEASE OF SOCIAL SECURITY NUMBERS: The St. Johns County School Board is authorized to collect, use, or release social security numbers (SSN) of vendors, contractors and their employees for the following purposes, which are noted as either required or authorized by law to be collected.

The collection of social security numbers is either specifically authorized by law or imperative for the performance of the School Board’s duties and responsibilities as prescribed by law (Sections 119.07(5)(a)2 and 3, Florida Statutes):

a) Criminal history and criminal background checks/Identifiers for processing fingerprints by

Department of Law Enforcement, if SSN is available [Required by Fla. Admin. Code 11 C-6.003 and Fla. Stat. § 119.07(5)(a)6]

b) Vendors/Consultants that School Board reasonably believes would receive a 1099 form if a tax identification number is not provided including for IRS form W-9 [Required by 26 C.F.R. § 31.3406- 0, 26 C.F.R. § 301.6109-1, and Fla. Stat. § 119.07(5)(a)2 and 6]

40. PURCHASING AGREEMENTS AND STATE TERM CONTRACTS: The Purchasing agreements and state term contracts available under Florida Statute 287.056 have been reviewed.

41. DISCRIMINATORY VENDOR LIST: Pursuant to Florida Statute 287.134, an entity or affiliate who has been placed on the discriminatory vendor list may not submit a bid, proposal, or reply on a contract to provide any goods or services to a public entity; may not submit a bid, proposal, or reply on a contract with a public entity for the construction or repair of a public…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .