ITB 814 - Administrative Document - Amended 1.docx
DOCX document 72 KB Posted
- Attached to
- IDPR Fire Rings and Picnic Tables
- Solicitation number
- 814
- Issued by
- Idaho
About this file
This Amended Invitation to Bid (ITB 814) is issued by the State of Idaho Division of Purchasing on behalf of the Idaho Department of Parks and Recreation (IDPR) and seeks competitive bids for fire rings and picnic tables to enhance recreational infrastructure across the state's 30 parks. The solicitation requests three product categories: extra heavy-duty picnic tables, ADA-accessible picnic tables, and both ADA-accessible and standard campfire rings, with estimated quantities and regional pricing provided in the bid schedule. The deadline for submitting written questions is specified in the IPRO system event details, with the ITB closing date also referenced in IPRO, followed by a public bid opening via Microsoft Teams at 10:30 AM Mountain Time on the day after event closure. The ITB lead is Kevin Jarrett, Buyer at the Division of Purchasing (208-332-1615; Kevin.Jarrett@adm.idaho.gov). Delivery is expected within 120 days after receipt of order to three regional locations: the North Region headquarters in Coeur d'Alene, South Region at Eagle Island State Park, and East Region at Massacre Rocks State Park. Delivery must occur Monday through Friday, 8:00 AM to 3:00 PM local time, excluding state holidays, with the contractor responsible for unloading and any component reassembly.
Award will be made to the responsive, responsible bidder with the lowest total cost across all three regions as submitted on the bid schedule. Bidders must submit electronically via IPRO with required documentation including the completed bid schedule, product specification sheets, a W-9 form, and the state-supplied signature page. All materials must be submitted in Microsoft Word or Excel format unless otherwise specified; PDF submissions are not acceptable. Bids that condition acceptance on alternative terms and conditions or take exception to the state's terms and conditions will be deemed non-responsive. Contractors must maintain records for at least three years after contract termination and grant state and federal auditors access to all contract-related records. The specifications are mandatory minimum requirements addressing material composition, dimensions, weight capacity, safety features, laser engraving with "IDAHO PARKS AND RECREATION," galvanized hardware, and warranty compliance. No set-asides, incumbent vendors, or specific budget amounts are identified in this solicitation.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATE OF IDAHO
DIVISION OF PURCHASING
FOR
DEPARTMENT OF PARKS AND RECREATION
Invitation to Bid (ITB) 814
Fire Rings and Tables
AMENDED 1 – 9/26/2025
TABLE OF CONTENTS
| ITB Administrative Information | 1 | |
| 1 | PURPOSE | 2 |
| 2 | GENERAL INFORMATION, solicitation instructions and standard terms and conditions | 2 |
| 3 | INQUIRIES | 2 |
| 4 | BACKGROUND | 2 |
| 5 | SPECIFICATIONS | 3 |
| 6 | Estimated QUANTITY | 5 |
| 7 | COST | 5 |
| 8 | BILLING PROCEDURE | 5 |
| 9 | SUBMISSION REQUIREMENTS | 6 |
| 10 | AWARD | 7 |
| 11 | Warranty | 7 |
| 12 | Delivery | 7 |
| 13 | Insurance Requirements | 8 |
| 14 | Records Maintenance | 8 |
| 15 | Audit Rights | 8 |
| ATTACHMENT 1-BIDDER QUESTIONS | 9 | |
| Attachment 2-BID SCHEDULE | 11 |
ITB Administrative Information
| ITB Title: |
| Fire Rings and Tables |
| ITB Project Description: |
| The Idaho Department of Parks and Recreation is seeking to acquire picnic tables and fire rings to be kept outside at the camp sites and day use areas at the State’s 30 parks to enhance the recreation of the public. |
ITB Lead:
Kevin Jarrett, Buyer Division of Purchasing 650 W State Street, Boise, ID 83702 Kevin.Jarrett@adm.idaho.gov 208-332-1615
| Submit electronically via IPRO: |
| Electronic Submission |
IPRO Login
| Deadline To Receive Questions: |
| See Dates section in event LUMA |
| ITB Closing Date: |
| See IPRO Header Document |
Public Bid Opening:
Teams Link:
10:30 AM Mountain Time on day after event close ITB 814 Public Bid Opening | Meeting-Join | Microsoft Teams
| Delivery Date: |
| Delivery is expected one hundred and twenty (120) days ARO. |
PURPOSE
The State Department of Parks and Recreation, through the Idaho Division of Purchasing (“DOP”), is requesting Bids from qualified Vendors for the purchase of Fire Rings and Picnic Tables in accordance with the specifications provided below.
GENERAL INFORMATION, solicitation instructions and standard terms and conditions This Solicitation is issued by the state of Idaho (the “State”) via IPRO: (IPRO LOGIN). The ITB Lead is the only contact for this Solicitation. All correspondence regarding this ITB shall be in writing. In the event that it becomes necessary to revise any part of this ITB, amendments will be posted at IPRO. It is the responsibility of the Bidder to monitor IPRO for any updates or amendments. Any oral interpretations or clarifications of this ITB shall not be relied upon. All changes to this ITB must be in writing and posted at IPRO to be valid. Alternate Bids are not allowed.
INQUIRIES
Questions or other correspondence must be submitted in writing to the ITB Lead listed below. QUESTIONS MUST BE RECEIVED BY 11:59:59 P.M. Mountain Time ON THE DATE LISTED IN THE ITB ADMINISTRATIVE INFORMATION. Written questions must be submitted using Attachment 1, Bidder Questions. Official answers to all written questions will be posted on IPRO as an amendment to this ITB.
ITB Lead: Kevin Jarrett Phone: 208-332-1615 E-mail: Kevin.Jarrett@adm.idaho.gov
Any questions regarding the State of Idaho Standard Contract Terms and Conditions (found in the Questions Section of the event in LUMA) must also be submitted in writing, using Attachment 1, Bidder Questions, by the deadline identified in the ITB Administrative Information. The State will not consider proposed modifications to these requirements after the date and time set for receiving questions. Questions regarding these requirements must contain the following:
1. The rationale for the specific requirement being unacceptable to the party submitting the question (define the deficiency).
2. Recommended verbiage for the State’s consideration that is consistent in content, context, and form with the State’s requirement that is being questioned.
3. Explanation of how the State’s acceptance of the recommended verbiage is fair and equitable to both the State and to the party submitting the question.
Bids which condition the Bid based upon the State accepting other terms and conditions not found in the ITB, or which take exception to the State’s terms and conditions, will be found non-responsive, and no further consideration of the Bid will be given.
BACKGROUND
IDPR is seeking to acquire picnic tables and fire rings to be used by the public at State parks all over Idaho. They will be outside year-round, and many may endure hard use. The specifications of such goods can be found below.
SPECIFICATIONS
These specifications are the minimum mandatory specifications that your Bid must meet in order for the State to consider your Bid for award. Restate each specification listed in this section, followed by your response demonstrating that your Bid meets or exceeds the required specifications; provide model, part #, or description, as appropriate.
Extra Heavy Duty Picnic Table Both seats and tabletops must be bronze anodized aluminum, brown anodized aluminum or anodized aluminum with brown powder coated finish Seats and tabletop must be eight (8’) feet in length with the seats being ten (10”) inches wide and the tabletop being thirty (30”) inches wide Surface height of table must be between twenty-eight (28”) inches and thirty-four (34”) inches Seat height must be between seventeen (17”) inches and nineteen (19”) inches Frame must be two and three eights (2-3/8”) inch O.D galvanized steel Frame must be supported by two (2) one and five sixteenth (1-5/16”) inch O.D galvanized steel diagonal braces Table frame design must incorporate non-tip, non-trip, walk-through features. All bends are to be tightly formed to prevent tipping when weight is on one side.
IDAHO PARKS AND RECREATION must be laser engraved into the center of table using seven sixteenth (7/16”) inch font approved by IDPR Galvanized bolt fasteners and hardware must be three eights (3/8") inch diameter and must be included for assembly Must meet warranty requirements found in Section 11, Warranty.
ADA Picnic Tables Both seats and tabletop must be bronze anodized aluminum, brown anodized aluminum or anodized aluminum with brown powder coated finish Seats must be eight (8’) feet in length and ten (10”) inches wide.
Top must be between one hundred and sixteen inches (116”) and ten (10’) feet in length and thirty (30”) inches wide to allow for ADA compliant wheelchair access at one end of the table Table must have ADA recommended space of thirty (30”) inches wide, nineteen (19”) inches deep and twenty-seven (27”) inches from ground to bottom of table for knee clearance.
Surface height of table must be between twenty-eight (28”) inches and thirty-four (34”) inches Seat height must be between seventeen (17”) inches and nineteen (19”) inches Frame must be two and three eights (2-3/8”) inch O.D galvanized steel Frame must be supported by two (2) one and five sixteenth (1 5/16”) inch O.D galvanized steel diagonal braces Extended top must be support by one (1) one and five sixteenth (1-5/16”) inch O.D galvanized steel diagonal cross brace with brace positioning to meet ADA clearance guidelines Table frame design must incorporate non-tip, non-trip, walk-through features. All bends are to be tightly formed to prevent tipping when weight is on one side IDAHO PARKS AND RECREATION must be laser engraved into the center of table using seven sixteenth (7/16”) inch font approved by IDPR Galvanized bolt fasteners and hardware must be three eights (3/8") inch diameter and must be included for assembly Must meet warranty requirements found in Section 11, Warranty
ADA Accessible Campfire Rings Campfire rings must have a diameter of thirty-two (32”) inches Campfire ring height must be between twenty-three and three eights (23-3/8”) inches and twenty-seven (27”) inches Campfire ring must be constructed from a three sixteenth (3/16”) inch thick steel plate Campfire ring must have a formed one (1”) inch lip around top of ring Campfire ring must have one (1”) inch diameter draft holes spaced around the bottom perimeter Campfire ring must have an eight (8”) inch heat shield Elevated swivel grate and fire bed conform to meet the ADA guidelines for one hand operation and require less than five (5) lbs. of force to move Swivel grate must withstand snow loads of over five hundred and sixty-nine (569) lbs. per sq. ft. on the grate Cooking grate must be a minimum of three hundred (300) square inches Cooking grate must be a single welded component using one half (1/2”) inch diameter steel bars mounted on two and three eights (2-3/8”) inch OD steel tube Cooking grate must be able to swivel one hundred and eighty (180) degrees Cooking grate handle must be designed to never be over the fire Cooking grate must include a spring grip suitable for public use made from one eighth (1/8") inch x one half (1/2") inch flat bar (not wire springs) Campfire ring must be designed to be filled with aggregate to about nine (9”) inches above ground to provide elevated fire surface The fire ring must include three (3) heavy anchors of one and three fourths (1-3/4") inch x one and three fourths (1-3/4") inch x three sixteenths (3/16") inch steel angle with welded-on spades of one eighth (1/8") inch thick steel to permanently anchor unit to ground Campfire rings must be finished in high temperature, heat resistant, nontoxic black enamel.
Must meet warranty requirements found in Section 11, Warranty.
Campfire Rings Campfire rings must have a diameter of thirty-two (32”) inches Campfire rings height must be between nine (9”) and eighteen (18”) inches Campfire ring must be constructed from a three sixteenth (3/16”) inch thick steel plate Campfire ring must have a formed one (1”) inch lip around top of ring Campfire ring must have one (1”) inch diameter draft holes spaced around bottom perimeter Cooking grate must be constructed of five eights (5/8”) inch diameter steel perimeter bars and one half (1/2”) inch diameter steel grate bars Cooking grate must be a minimum of two hundred and fifty (250) square inches Cooking grate must be able to be adjusted from below the top of the campfire ring, to between seven (7”) inches and twelve (12”) inches above the top of the campfire ring Cooking grate adjustment handles must be turned to the outside of the fire ring, away from the fire. Cooking grate must include a spring grip suitable for public use made from one eighth (1/8") inch x one half (1/2") inch flat bar (not wire springs) Cooking grate must be structurally reinforced to resist hard use and vandalism. The cooking grate must be designed to lift over and out of the campfire ring but remains permanently attached The fire ring must include three (3) heavy anchors of one and three fourths (1-3/4") inch x one and three fourths (1-3/4") inch x three sixteenths (3/16") inch steel angle with welded-on spades of one eighth (1/8") inch thick steel to permanently anchor unit to ground Campfire rings must be finished in high temperature, heat resistant, nontoxic black enamel.
Must meet warranty requirements found in Section 11, Warranty.
Estimated QUANTITY Estimated quantities found in Attachment 2 – Bid Schedule are for evaluation purposes only. The State does not guarantee any minimum or maximum amounts for the life of the contract.
COST
Provide your fully burdened Total Cost for each Region on the Bid Schedule (Attachment 2). Vendor must provide pricing for each Region. If a vendor does not respond to one or more Region their bid may be considered non-responsive.
BILLING PROCEDURE
The Contractor must mail a signed invoice after delivery has taken place. No invoice will be accepted or paid without receipt of required documentation. Invoices submitted without the required documentation will be returned to the Contractor for resubmission.
The Contractor must provide the following information with each invoice:
| 1 | IPRO contract number (and name of project/product, if appropriate) and Agency PO number |
| 2 | Identification of billing period |
| 3 | Total amount billed for the billing period |
| 4 | Detailed description of services/products provided and associated # of hours/$ amounts, as appropriate |
| 5 | Name of authorized individual and contact information for Contractor |
Invoices and reports are to be submitted to:
Agency Contact Person: Nicolas Toryanski Agency Name: Idaho Department of Parks and Recreation Address: 5657 Warm Springs Ave Boise, ID 83716
SUBMISSION REQUIREMENTS
9.1 Required Bid Submission Items
Your Bid Submission must consist of the following:
Bid Schedule Provide your cost information on Attachment 2, Bid Schedule, below. Do not submit your Bid on any other form. Submitting your Bid on a form different than the Bid Schedule may cause your Bid to be rejected as non-responsive.
Specification Sheets Submitting vendors must provide copies of specification sheets for each quoted item.
W-9 Form Submitting vendors must provide a copy of their filled-out W-9 form.
State of Idaho Signature Page The State of Idaho Signature Page must be completed and submitted as part of your Bid. The State of Idaho Signature Page is attached in IPRO.
9.2 Bid Submission Methods
Bids may be submitted electronically via IPRO. Do not fax or e-mail your Bid. Your Bid must be received at the Division of Purchasing by the date and time specified on the IPRO header document. The official time, for bid closing purposes, is the Division of Purchasing’s time clock.
9.2.1 Electronic Submission via IPRO
When submitting electronically via IPRO, upload all of the Required Bid Submission Items (See Section 9.1) and enter your cost in IPRO for each line item; as the “Total Cost” on the Bid Schedule OR $0.01 as your cost in IPRO.
Upload all Required Bid Submission Items using Microsoft products such as Word and Excel. Do not submit items in .pdf format, unless provided otherwise in this ITB.
When submitting via IPRO, be advised that that the Bidder for Bid evaluation and award purposes is the entity profile under which submit in IPRO, which must be the same legal entity presented in your uploaded response materials. If the entity identified on the state supplied Signature Page differs from the entity under which you submit your Bid in IPRO, the information provided on the Signature Page prevails.
It is mandatory to submit your Bid electronically via IPRO, all Bidders participating in a Solicitation issued through IPRO must establish an account in the IPRO system as it is necessary in order to process and/or award the resulting Contract(s). It is free to establish an account and only takes a few minutes.
Bidders are further advised to upload response materials with descriptive file names, organized and consolidated in a manner which allows the State to efficiently navigate the Bidder’s response; as the State will print uploaded documents for evaluation in the manner received via IPRO.
9.3 Trade Secrets
If your Bid contains trade secret information which you have identified, you must also submit a redacted copy of the Bid (in electronic format, with the word “redacted” in the file name) with all trade secret information removed or blacked out; as well as a separate document containing a complete list (per the instructions in the three (3) paragraphs directly below) of all trade secret information which was removed or blacked out in the redacted copy.
Paragraph 28 of the Solicitation Instructions to Vendors describes trade secrets to “include a formula, pattern, compilation, program, computer program, device, method, technique or process that derives economic value, actual or potential, from not being generally known to, and not being readily ascertainable by proper means by other persons and is subject to the efforts that are reasonable under the circumstances to maintain its secrecy.” In addition to marking each page of the document with a trade secret notation (as applicable; and as provided in Paragraph 28 of the Solicitation Instructions to Vendors), Bidders must also:
Identify with particularity the precise text, illustration, or other information contained within each page marked “trade secret” (it is not sufficient to simply mark the entire page). The specific information you deem “trade secret” within each noted page must be highlighted, italicized, identified by asterisks, contained within a text border, or otherwise clearly delineated from other text/information and specifically identified as a “trade secret.”
Provide a separate document entitled “List of Redacted Trade Secret Information” which provides a succinct list of all trade secret information noted in your Bid; listed in the order it appears in your submittal documents, identified by Page #, Section #/Paragraph #, Title of Section/Paragraph, specific portions of text/illustrations; or in a manner otherwise sufficient to allow the State’s procurement personnel to determine the precise text/material subject to the notation. Additionally, this list must identify with each notation the specific basis for your position that the material be treated as exempt from disclosure.
AWARD
Award will be made to the responsive responsible Bidder with the lowest Total Cost across all three (3) regions, as provided on the Bid Schedule.
Warranty Warranty information can be located in the Terms and Conditions under Section 2.4, Warranty. The Terms and Conditions are located in the Questions section of the event in LUMA.
Delivery The Contractor must deliver and unload the Fire Rings and Picnic Tables to the Delivery Locations within one hundred and twenty days (120) ARO. Contractors who are unable to meet this delivery requirement may be declared non-responsive. The Contractor is responsible for providing the necessary labor and equipment to unload the Fire Rings and Picnic Tables, including any re-assembly of components that were unassembled for delivery or unloading.
Delivery must be made Monday through Friday, 8:00 am to 3:00 pm local time (per Delivery Location) excluding State of Idaho recognized holidays (https://www.idaho.gov/government/holidays.html) unless otherwise approved by IDPR.
DELIVERY LOCATIONS
North Region – HQ - 2885 W Kathleen Ave #1, Coeur d’Alene, ID 83815 South Region – Eagle Island State Park – 165 S Eagle Island Pkwy, Eagle, ID 83616 East Region – Massacre Rocks State Park – 3592 N. Park Ln, American Falls, ID 83211
POINTS OF CONTACT
North Region – HQ – Julie Greaser – 208-769-1511 South Region – Eagle Island State Park – 208-938-5217 East Region – Massacre Rocks State Park –208-220-0332
Insurance Requirements Can be found in the Questions section in the event in LUMA.
Records Maintenance Contractor shall maintain or supervise the maintenance of all records necessary to properly account for all payments made to the Contractor pursuant to the Contract. These records shall be retained by the Contractor for at least three (3) years after the Contract terminates, or until all audits initiated within the three (3) years have been completed, whichever is later.
Audit Rights The Contractor agrees to allow State and Federal auditors and State purchasing staff access to all the records relating to this Contract, for audit, inspection, and monitoring of services or performance. Such access will be during normal business hours or by appointment.
ITB 814 Fire Rings and Tables
ATTACHMENT 1-BIDDER QUESTIONS
PLEASE DO NOT IDENTIFY YOUR NAME OR YOUR COMPANY’S NAME OR PRODUCT NAMES OF INTELLECTUAL PROPERTY IN YOUR QUESTIONS.
ADD ROWS BY HITTING THE TAB KEY WHILE WITHIN THE TABLE AND WITHIN THE FINAL ROW.
The following instructions must be followed when submitting questions using the question format on the following page.
1. DO NOT CHANGE THE FORMAT OR FONT. Do not bold your questions or change the color of the font.
2. Enter the ITB section number that the question is for in the “ITB Section” field (column 2). If the question is a general question not related to a specific ITB section, enter “General” in column 2. If the question is in regards to a State Term or Condition or a Special Term or Condition, state the clause number in column 2. If the question is in regard to an attachment, enter the attachment identifier (example “Attachment A”) in the “ITB Section” (column 2), and the attachment page number in the “ITB page” field (column 3).
3. Do not enter text in the “Response” field (column 5). This is for the State’s use only.
4. Once completed, this form is to be e-mailed per the instructions in the ITB. The e-mail subject line is to state the ITB number followed by “Questions.”
ITB 814 Fire Rings and Picnic Tables Page 12
| ITB Section |
| ITB Page |
| Question |
| Response |
Attachment 2-BID SCHEDULE
Attachment 2 – Bid Schedule can be found in the Questions section of the event in LUMA.
image1.png
File details come from the government source that posted it. Updated .