Integrated Telemetry Analysis System Upgrade (JDAM PO) SOR - 25 March 2026.pdf

Statement of Requirements

Integrated Telemetry Analysis System (ITAS) Upgrade

25 March 2026

Prepared By

AFLCMC/EBHTA

6034 Dogwood Ave Hill AFB, UT 84056

Controlled by: DAF Controlled by: AFLCMC/EBHTA CUI Category(ies): Controlled Technical Information Limited Dissemination: FEDCON POC: Anthony Koberstein

DISTRIBUTION STATEMENT D. Secondary distribution authorized to the Department of Defense and U.S. DoD contractors only; administrative or operation use and vulnerability information; 19 January 2022. Other requests for this document shall be referred to JDAM Program Office, AFLCMC/EBHTB, 6034 Dogwood Ave, Bldg. 1257 Hill AFB, UT 84056-5816.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

DESTRUCTION NOTICE. Destroy by any method that will prevent disclosure of contents or reconstruction of the document.

1. INDUCTUCTION AND PURPOSE:

Joint Direct Attack Munitions (JDAM) Program Office is in need for Integrated Telemetry Analysis System upgrade. The program office is requesting to purchase the following below as defined.

2. Item/Product Description:

The following items are required for performance under this contract:

2.1 Commercial rugged telemetry controller - integrated laptop, Quantity: 4 ea.

• Panasonic Toughbook, Windows 11 OS (brand name or equivalent)

• Min Specs: 14" display, 32G Ram, 1TB SSD

2.2 Edge2 Compact 1U 2-ch Receiver Decom Telemetry Processing Unit w/IRIG Time Code Trans, Quantity: 1 ea.

• L-S-C Bands

• PCM/FM, SOQPSK, and BPSK Demods included

• Low Latency Audio, CH10, and TMoIP Outputs

• External AC-DC power converter module

• BNC Breakout cable, and rubber feet

2.3 Edge2 Compact 1U 1-ch Receiver 1-ch Decom Telemetry Processing Unit w/IRIG Time Code Trans is the Single-Input RF Receiver, Quantity: 4 ea.

• L-S-C Bands

• PCM/FM, SOQPSK, and BPSK Demods

• Low Latency Audio, CH10, and TMoIP Outputs

• BNC Breakout cable and rubber feet

2.4 Edge2 Compact 1U 2-ch Bit Sync Decom Telemetry Processing Unit w/IRIG Time Code Trans (Dual-Input PCM Databrick), Quantity: 3 ea.

(upgraded version of our current X-5000 PCM Databrick)

• PCM Bit Sync – 50Mbps, NRZ-L/M/s, RNRZ-L codes

• 25Mbps, BIO L/M/S codes

• Low Latency Audio, CH10 and TMoIP outputs

• NBC breakout cable and rubber feet.

3. DELIVERY DATE:

3.1. The proposed delivery date is no later than 120 days from the contract award, with early delivery authorized.

3.2. Shipment Address:

ATTN: JDAM / Eglin HGR 71

DODAAC - EY0305

305 W. Choctawhatchee Road Eglin AFB, FL 32542-5701

4. GROUND RULES AND ASSUMPTIONS

4.1. Government Furnished Equipment (GFE) will be provided as needed/requested through the Government Contracting office.

4.2. Any associated Non-Recurring Engineering (NRE) for obsolescence will be priced separately.

5. DELIVERABLES:

5.1 Four (4) commercial rugged telemetry controller - integrated laptops

5.2 One (1) Edge2 Compact 1U 2-ch Receiver Decom Telemetry Processing Unit w/IRIG

Time Code Trans

5.3 Four (4) Edge2 Compact 1U 1-ch Receiver 1-ch Decom Telemetry Processing Unit w/IRIG Time Code Trans is the Single-Input RF Receiver

5.4 Three (3) Edge2 Compact 1U 2-ch Bit Sync Decom Telemetry Processing Unit w/IRIG Time Code Trans Dual-Input PCM Databrick)