IPD_REPORT_8115-01-582-9708.pdf
PDF 60 KB Posted
- Solicitation number
- 47QSSC-26-Q-0267
- Issued by
-
GSA Federal Acquisition Service
About this file
Item Purchase Description – Shipping and Storage System (Size Medium, European)
This GSA Item Purchase Description document specifies procurement requirements for a medium-sized shipping and storage system designed for rapid field deployment. The NSN is 8115-01-582-9708, Version 17, with Active status under AAC H. The fully assembled system measures 34.0 inches in height (±1.5 inch), 48.0 inches in nominal length, and 32.0 inches in nominal width, with a maximum load capacity of 3,000 lbs per system (3 stacks maximum). The system weighs 57.0 lbs (±10%) including all components and is designed as a self-containing, collapsible, reusable unit liftable from all four sides with weather-resistant properties.
The system comprises three main components that must lock together: (1) a bottom pallet of injection-molded polypropylene or thermoformed high-density polyethylene featuring a 9-leg design with minimum 4 built-in locks, 4-way forklift entry, nestable and fire-retardant capabilities; (2) a plastic sleeve of grey plastic material with minimum 8 locking holes, one centered drop panel, and full collapsibility to flat; and (3) a black top cover of injection-molded polypropylene or thermoformed high-density polyethylene with minimum 4 built-in locks, nestable and fire-retardant properties. All components must be packaged together as one unit per ASTM D3951. Marking shall comply with FED-STD-123H for civilian destinations and MIL-STD-129R for military destinations, including barcode marking. PCM requirements mandate a minimum 25–50 percent postconsumer recovered plastic content per EPA Comprehensive Procurement Guidelines. Quality assurance requires product conformance to commercial item specifications with workmanship free from cracks, cuts, holes, chafed spots, dirt, contamination, or mold release compounds.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFQ Form_47QSSC-26-Q-0267.pdf | ||
| MIL STD 129R and Supplement.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ITEM PURCHASE DESCRIPTION
General Services Administration
8115-01-582-9708 Ver: 17 UI: EA Status: Active AAC: H
SHIPPING AND STORAGE SYSTEM (SIZE MEDIUM, EUROPEAN)
NSN Description:
ITEM NAME SHIPPING AND STORAGE SYSTEM (SIZE MEDIUM, EUROPEAN)
SYSTEM CHARACTERISTICS (FULLY ASSEMBLED):
OVERALL HEIGHT 34.0 INCHES (+/- 1.5 INCH)
OVERALL LENGTH 48.0 INCHES (NOMINALl)
OVERALL WIDTH 32.0 INCHES (NOMINAL)
LOAD CA PACITY 3000 LBS PER SYSTEM; 3 STACKS MAXIMUM ALLOWANCE
SHIPPING WEIGHT 57.0 LBS (+/-10%) INCLUDES PALLET, TOP AND SLEEVE
SPECIAL FEATURES: DESIGNED FOR SHIPPING AND STORING VARIOUS
SUPPLIES AND FOR RAPID DEPLOYMENT IN THE FIEL D;
CONSISTS OF 3 MAIN COMPONENTS - BOTTOM
PALLET, TOP COVER, AND A SLEEVE;
SELF-CONTAINING UNIT THAT IS COLLAPSIBLE,
REUSABLE, AND LIFTABLE FROM ALL 4 SIDES;
BOTTOM PALLET AND TOP COVER ARE LOCKAB LE TO A
SLEEVE;
WEATHER RESISTANT;
ALL THREE COMPONENTS MUST LOCK TOGETHER TO FORM
ONE SELF CONTAINING UNIT.
SYSTEM COMPONENTS INCLUDE:
BOTTOM PALLET (1)
OVERALL WIDTH 32.0 INCHES (+/-10%)
OVERAL L LENGTH 48.0 INCHES (+/-10%)
OVERALL HEIGHT 6.0 INCHES (+/-10%)
OVERALL COLOR BLACK
OVERALL MATERIAL INJECTION MOLDED POLYPROPYLENE, OR
THERMOFORMED HIGH DENSITY POLYETHYLENE
SPECIAL FEATURES 9 LEGS PALLET DESIGN, WITH MINIMUM OF 4 BUILT IN
LOCKS DESIGNED TO MATCH THE LOCKING HOLES
ON THE SLEEVE;
4-WAY FORKLIFTER ENTRY;
NESTABLE;
FIRE RETARDANT;
Printed on: 08/27/2026 Page 1
REUSABLE;
INCLUDES DRAIN HOLES IN ACCORD ANCE WITH
NORMAL COMMERCIAL PRACTICE
PLASTIC SLEEVE (1)
OVERALL OPEN WIDTH 31.0 INCHES (+/-10%)
OVERALL OPEN LENGTH 46.0 INCHES (+/-10%)
OVERALL OPEN HEIGHT 28.0 INCHES (+/-10%)
OVERALL THICKNESS 0.5 INCHES (+/-20%)
OVE RALL COLOR GREY
OVERALL MATERIAL PLASTIC
DROP PANEL WIDTH 30.0 INCHES
DROP PANEL HEIGHT 16.0 INCHES
SPECIAL FEATURES ONE DROP PANEL CENTERED ON THE LONG
SIDE OF THE SLEEVE AT THE TOP;
MINIMUM 8 LOCKING HOLES IN THE APPROPRIATE
LOCATIONS ON THE TOP AND BOTTOM TO
ACCOMMODATE LOCKS;
MUST BE FULLY COLLAPSIBLE TO FLAT
TOP (1)
OVERALL OPEN WIDTH 32.0 INCHES (+/-10%)
OVERALL OPEN LENGTH 48.0 INCHES (+/-10%)
OVE RALL OPEN HEIGHT 3.5 INCHES (+/-10%)
OVERALL COLOR BLACK
OVERAL MATERIAL INJECTION MOLDED POLYPROPYLENE, OR,
THERMOFORMED HIGH DENSITY POLYETHYLENE
SPECIAL FEATURES MINIMUM OF 4 BUILT IN LOCKS DESIGNED TO MATCH
tTHE LOCKING HOLES ON THE SLEEVE;
NESTABLE;
FIRE RETARDANT;
REUSABLE;
KEY FIELDS:
PACKAGING/PACKING
PACKAGING/PACKING: All components of the system shall be packaged together as one (1) unit. Units shall be packaged to provide protection against loss or damage during shipments, handling, and storage, and comply with the latest revision
Printed on: 08/27/2026 Page 2 of ASTM D3951 St andard Practice for Commercial Packaging.
MARKING
For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.
F or additional references, see below link:
FED-STD-123H
https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf
MIL-STD-129R
http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf
PCM
THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE.
PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL
CONTENT WITHIN REASONABLE COST.
Regulatory requirement (Plastic Thermoformed): The contractor shall certify that the product offered shall include a minimum range of 25 -50 percent postconsumer recovered plastic in accordance with the EPA Com prehensive Procurement Guidelines, which may be found at:
www.epa.gov/epawaste/conserve/tools/cpg/index.htm
The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided fo r under the provisions of the contract.
QUALITY ASSURANCE
PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.
QUALITY ASSURANCE
WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.
Printed on: 08/27/2026 Page 3
File details come from the government source that posted it. Updated .