IPD 5130013096589.pdf
PDF 52 KB Posted
- Attached to
- 5130-01-309-6589 | ELECTRIC IMPACT WRENCH
- Solicitation number
- 47QSSC-25-Q-6589
- Issued by
-
GSA Federal Acquisition Service
About this file
This Item Purchase Description (IPD) details specifications for an Electric Impact Wrench for the General Services Administration (GSA). The specific wrench is an Aircraft Dynamics Corporation model IMP2201, with a DC current type, 24-28 volt rating, 0.5 inch square drive, and a male spindle drive end type. The wrench includes a combination breastplate and spade end handle, and comes with a 40-foot power cord and connector (part number 11682338).
The document provides extensive instructions for packaging, marking, and shipping the wrench, including requirements for labeling packages with requisition numbers, complying with Federal Standard 123 for domestic civilian activities, and adhering to Military Standard 129 for military deliveries. Additional requirements include providing Safety Data Sheets with comprehensive hazard information, treating wood packaging materials for export, and ensuring the item is packaged to protect against physical damage during shipment. The NSN (National Stock Number) for this item is 2350-01-248-7619.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ITEM PURCHASE DESCRIPTION
General Services Administration
Printed on: 10/22/2024, 1:55:10 PM Page 1
5130-01-309-6589 UI: EA
WRENCH, IMPACT, ELECTRIC
DESCRIPTION
Current Type: DC
Voltage Rating: 24 volt minimum and 28 volt maximum
Drive End Type: Male spindle
Size: 0.5 inch
Drive Shape: Square
Drive for which designed: Straight
Handle style: Combination breastplate and spade end handle non-removable vertical type and side handle
Accessories: Connector, part number 11682338 with 40 foot porm 6 inch cord
III End Item Identification: NSN 2350-01-248-7619
Aircraft Dynamics Corporation Part Number IMP2201
ITEM MARKING
Each item Shall Be Marked in a Permanent and Legible Manner with:
1) Manufacturer's Part Number
2) Manufacturer's Name or Identifying Symbol, and
3) Country of Origin
Each Package including the unit, single, intermediate, and exterior container must be labeled with the requisition number or Transportation Control Number (TCN). Requisition
Number and TCN are found on the Purchase Order.
PACKAGING
One (1) item shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling, and storage.
MARKING
MARKING
In general, unless otherwise specified by the contracting officer, marking of shipments shall be in accordance with the GSAM provision/ Clause 552.211-73, marking. In more detail: Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123. That is, unit, intermediate, and transport packages shall be marked directly on the side surface of the package or on a label affixed to the package, with the identification marking as specified in the standard. Transport
Printed on: 10/22/2024, 1:55:10 PM Page 2 packages shall also have, in addition to the identification marking, a shipping label that includes the purchase order, contract, or the requisition numbers; as applicable, including the consignor and consignee names (i.e. ship from/ to), gross weight, cube and piece number.
Marking of supplies for deliveries to civilian activities, export locations, including commercial freight forwarders and third party logistics providers, and excluding freight entering the Defense Transportation System, shall be the same as deliveries to domestic locations except that the shipping label shall show on the same label, or another label affixed next to the shipping label, the ultimate consignee (i.e. Mark for AAC).
Marking of supplies for deliveries to domestic military activities shall comply with the latest edition of Military Standard 129. That is, unit, intermediate, and exterior or shipping containers shall be marked directly on the side surfaces of the package or on a label affixed to the package, with the identification marking as specified in the standard.
Exterior or shipping containers shall also have in addition to the identification marking, a
Military Shipping Label (MSL) per the standard.
Marking of supplies for deliveries to military activities, export locations, including forwarding and container consolidation points (CCPs) shall be the same as deliveries to domestic locations except that the MSL must also show the ultimate consignee (Mark for
DoDAAC) and the Transportation Control Number (TCN).
"Latest version" is defined as the version in effect on the date of bid submittal. Federal
Standards and Military Standards can be accessed on-line via the Defense Logistics
Agency's "Assist" Quicksearch web site: http://quicksearch.dla.mil/
PACKAGING/ PACKING
Unless packaging in accordance with MIL-STD-2073-1 Standard Practice for Military
Packaging is specified in the solicitation, contract or order, packaging/ packing of supplies, exclusive of hazardous material, for domestic and export shipments to civilian and military activities shall comply with GSAM Provision/ Clause 552.211-75 Preservation, Packaging and Packing which references the National Motor Classification Standard
(NMFC) and/ or the latest requirements of ASTM D-3951, Standard Practice for
Commercial Packaging . Until the commercial packaging/ packing requirement in GSAM
Clause 552.211-75 is revised, compliance to either the GSAM clause or the ASTM D-3951, Standard Practice for Commercial Packaging will be acceptable; however, compliance to the ASTM requirements is mandatory for GSS contracts, and is preferred for all other contracts. In case of conflict between the GSAM clause and the revision of ASTM D-3951, the ASTM requirement shall govern.
Packaging of hazardous material (HM) supplies for shipments shall comply with the GSAM provision/ Clause 552.223-73, Preservation, Packaging, Packing, Marking and Labeling of
Hazardous Materials (HAZMAT) for Shipments . That is, packing of HM for domestic shipments shall comply with the latest versions of DOT HMR in 49 CFR, parts 171-180, and
OSHA HCS in 29 CFR, part 1910.1200.
Printed on: 10/22/2024, 1:55:10 PM Page 3
Packing of HM for export shipments (includes forwarding and container consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the latest versions of DOT HMR in 49 CFR, parts 171-180, and OSHA HCS in 29 CFR, part 1910.1200, and the applicable IMDG, IATA, ICAO, AFMAN-24 standard for the mode of transportation.
WOOD PACKAING MATERIAL
Packaging and packing of supplies using Wood Packaging Material (WPM) on a pallet or skid for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the requirements in provision/ Clause GSAM 552.211.89, Manufactured Wood Packaging
Material for Export or the applicable requirements in ASTM D-3951 relative to the WPM.
That is, all wood shall be treated and stamped appropriately for export, including the actual pallet or skid, if made of wood.
PALLETIZATION AND PREPARATION FOR DELIVERY
The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards.
In the event a wood pallet or skid is used for shipping, the requirements of GSAM
552.211.89, Non-Manufactured Wood Packaging Material for Export, shall apply.
ITEMS REQUIRING SAFETY DATA SHEETS (SDSs)
Items requiring Safety Data Sheets (SDSs) shall be provided by the contractor as specified in IPD and the FAR Provision/Clause 48 CFR 52.223 3 Hazardous Material Identification and
Material Safety Data, and the latest version of Federal Standard 313. One copy of the
SDS shall be included inside or affixed to the outside of each transport package. If affixed outside the SDS must be placed in a weather resistant envelope.
Data in all 16 sections of the OSHA HazCom/ GHS standards will be required. HM shall be labeled with an OSHA/ GHS compliant label to include the following data: (1) Product identifier, (2) Signal Word, (3) Hazard Statements, (4) Pictograms, (5) Precautionary
Statements, and (6) Chemical Manufacturer, Importer, or Other Responsible Party information.
File details come from the government source that posted it. Updated .