IFB.S0411589_Bread_Pans.pdf

State of California Department of Corrections and Rehabilitation

April 27, 2016

INVITATION FOR BID (IFB)

IFB No. S04111589

Notice to Prospective Contractors

The California Prison Industry Authority (CALPIA) invites you to review and respond to this Invitation for Bid (IFB), entitled BREAD PAN STRAIGHTENING & RESURFACING, IFB NO.

S04111589. In submitting your bid, you must comply with the instructions found herein and the Bidders Instructions REV-1012 located on the CALPIA website (www.calpia.ca.gov, select About CALPIA tab and then Doing Business with CALPIA).

In the opinion of CALPIA, this IFB is complete and without need of explanation. However, should you have questions, or need clarifying information, please contact the Contract Analyst indicated below.

Due Date/Time: May 11, 2016 at 3:00 pm CALPIA Contact SUBMIT BID TO:

Teresa Bozynski, Contract Analyst Phone: (916) 358-1838

Teresa.Bozynski@calpia.ca.gov

California Prison Industry Authority Attn: Teresa Bozynski, Contract Analyst

560 East Natoma Street Folsom, CA 95630

Please note that no verbal information given will be binding upon the CALPIA unless such information is issued in writing as an official addendum to this IFB.

The contract award will be made on the basis of BEST VALUE as determined by CALPIA alone, under statutory authority (Penal Code 2808) considering the following criteria:

1. Cost: Fair, reasonable, and competitive price, expressed warranties, life cycle of product, and customer service commitments for goods and or services.

2. Performance: Past performance, quality and/or reliability for the product or service;

certification by the International Standard Organization (ISO). Should a bidder be excluded based upon performance history, there must be documentation which supports that conclusion.

3. Experience: Length of time and/or number of instances the bidder has offered or produced the requested type of product and/or service.

http://www.calpia.ca.gov/

CALPIA may consider other factors deemed necessary to ensure that best value is achieved. Any such factors must be reduced to written form and maintained in the contract file for the duration of the resulting contract.

In the interest of achieving best value, CALPIA does not grant Small Business, Disabled Veteran Business Enterprise (DVBE), Target Area Contract Preference Act (TACPA), Local Agency Military Base Recovery Act (LAMBRA), or Enterprise Zone Act (EZA) preferences in evaluating bids.

Employment of ex-offenders by the bidder is encouraged by CALPIA as part of our ongoing mission to change lives through opportunities.

Any agreement resulting from this solicitation shall be of no force or effect until it is signed by both parties and approved by CALPIA. The Contractor is not to begin work until a contract has been made, all approvals have been obtained, and the contract has been fully executed. Should work begin before all approvals are obtained, services shall be considered voluntary.

TABLE OF CONTENTS

SECTION PAGE

A. Purpose and Description of Service 4 B. Bid Information 4 C. Bidder’s Minimum Qualifications 5 D. Bid Evaluation 5 E. Licenses and Permits 5 F. Standard Language 6 G. Bid Attachments 6

Attachment 1: Bid Document Submittal Check List 7 Attachment 2: Sample Standard Agreement (STD 213), Statement of Work and Payment Provisions 8

Attachment 3: Cost Sheet 11 Attachment 4: Payee Data Record (STD 204) 12 Attachment 5: Darfur Certification 14 Attachment 6: Experience/Past Performance (References) 15 Attachment 7: Appropriate Attire Policy 16

Bid Submittal Documents:

Attachment 1: Bid Document Submittal Check List 1 page Attachment 3: Cost Sheet 1 page Attachment 4: Payee Data Record (STD 204) 2 pages Attachment 5: Darfur Certification 1 page Attachment 6: Experience/Past Performance (References) 1 page

Bidder Instructions and Contract Provisions:

Bidders Instructions REV-0313* 11 pages General Provisions REV-1012* 19 pages Security Provisions REV-311* 5 pages

NOTE: Items shown with an Asterisk (*), are hereby incorporated by reference and are located on our website at the following link http://www.calpia.ca.gov Select About CALPIA, then select Doing Business with CALPIA.

A. Purpose and Description of Service

The California Prison Industry Authority (CALPIA) requires bread pan straightening, cleaning, and re-glazing for its Bakery Enterprise located at R.J. Donovan Correctional Facility in San Diego, CA. Refer to the Sample STD 213, Statement of Work and Payment Provisions attached to this IFB as Attachment 2.

CALPIA reserves the right, before the conclusion of the contract term to extend the contract for an additional one-year period. A written and approved amendment will be required to extend the contract prior to contract expiration.

B. Bid Information

1. Time Schedule

It is recognized that time is of the essence. All bidders are hereby advised of the following schedule and will be expected to adhere to the required dates and times. If no time for receipt of bids is specified in the IFB, the bid shall be due by the close of the business day on the date indicated. Close of the business day shall be 5:00 p.m. All times are Pacific Standard Time (PST)/Pacific Daylight Time (PDT).

2. Bid Submittal

Bids must be received via U.S. Mail, common carrier, or hand delivered, no other method of response will be accepted. Bids not submitted under sealed cover may be rejected.

Submit one (1) copy of the bid to the address and Contract Analyst on page 1 of this document. The interior sealed envelope must be plainly marked with the IFB number and title, must show your firm name and address, and must be marked with “DO NOT OPEN”, as shown in the following example:

EVENT DATE

TIME

(Pacific STD /Daylight Time)

IFB available to prospective bidders April 27, 2016 Final Date for Bid Submission/Bid Opening 5/11/16 3:00 PM Successful Bidder Letter and Posting of Intent to Award 5/12/16 5:00 PM Last Day to Appeal Intent to Award 5/18/16 5:00 PM Proposed Start Date of Agreement May 23, 2015

Company Name Company Address

IFB Number: S04111589 IFB Name: BREAD PAN STRAIGHTENING & RESURFACING Attention: Teresa Bozynski

BID SUBMITTAL – DO NOT OPEN

C. Bidder’s Minimum Qualifications

Experience: Contractor must provide proof of experience with services similar in nature to the services identified in the attached Statement of Work. Contractor is to provide information (Attachment No. 6) concerning three (3) projects within the last three (3) years that are similar in nature to the requirements of this project. Experience is defined as the kind and amount of work a Contractor has done relevant to the work contemplated by this procurement. Contractor is also to provide the contact person and phone number for the person who can attest to the work of each project.

Past Performance: Contractor will be evaluated on prior performance through Contractor’s references (Attachment No. 6), on three (3) projects similar in nature within the last three (3) years. Past performance is defined as the Contractor’s record of conforming to standards of good workmanship; Contractor’s record of forecasting and controlling costs; Contractor’s adherence to contract schedules, including the administrative aspects of performance; Contractor’s history of reasonable and cooperative behavior and commitment to customer satisfaction; and the Contractor’s business-like concern for the interest of the customer.

D. Bid Evaluation

Award of a contract resulting from this IFB will be based on the contractor providing the best value. The Contractor must meet or exceed the minimum requirements of the following criteria:

Category – Description Past Performance Experience

E. Licenses and Permits

During the term of the contract, the Contractor must maintain all required licenses and/or permits in full force and effect. If and when the State learns that the Contractor has failed to do so, the State may, in addition to any other remedy it may have, immediately terminate this contract without any cost or liability to the State. If, after bid submission, the Contractor replaces or renews a required license or permit or obtains a newly-applicable license or permit, the Contractor shall provide the State with a copy of the renewed or replaced or newly-obtained license or permit within 20 days following the Contractor's receipt of same.

The Contractor shall provide copies of all required license(s) and permit(s) at the time of bid submittal.

1. Business license as required by the city, county, or both as determined by bidder’s place of business.

F. Standard Language

CALPIA does not accept alternate contract language from a prospective contractor. A bid with such language will be considered a counter proposal and will be rejected.

CALPIA’s General Provisions (GP’s) are not negotiable.

G. Bid Attachments

Refer to the following pages for additional required attachments that are a part of this IFB.

Attachment 1

BID DOCUMENT SUBMITTAL CHECK LIST

A complete bid or bid package will consist of the items identified below.

Complete this checklist to confirm the items listed below have been included in your bid. Place a check mark or “X” next to each item that you are submitting. For your bid to be responsive, all required attachments must be returned. This checklist should be returned with your bid package.

NAME OF BIDDER:

COMPANY NAME:

Attachment Name/Description

_____ Attachment 1: Bid Document Submittal Check List _____ Attachment 3: Cost Sheet _____ Attachment 4: Payee Data Record (STD 204) NOTE: If company is incorporated, Payee’s Legal business name on the STD 204 must match the name registered with the Secretary of State of California.

_____ Attachment 5: Darfur Certification _____ Attachment 6: Experience/Past Performance (References)

STATE OF CALIFORNIA

STANDARD AGREEMENT ATTACHMENT 2

STD 213 (Rev 6/21/06) AGREEMENT NUMBER

S04111366

REGISTRATION NUMBER

Bread Pan Straightening & Resurfacing Services

1. This Agreement is entered into between the State Agency and the Contractor named below:

STATE AGENCY'S NAME

California Prison Industry Authority

CONTRACTOR'S NAME

2. The term of this Agreement is: xxx, or upon approval, whichever is the later, through xxx

3. The maximum amount $ of this Agreement is: Dollars and Fifty Cents

4. The parties agree to comply with the terms and conditions of the following exhibits that by this reference made a part of the Agreement.

Statement of Work and Payment Provisions 2 pages

General Provisions REV-1012* 19 pages

Security Provisions REV-311* 5 pages

NOTE: Items shown with an Asterisk (*), are hereby incorporated by reference and made part of this agreement as if attached These documents can be viewed at http://www.calpia.ca.gov, (select About CALPIA tab, then select Doing Business with

CALPIA).

IN WITNESS WHEREOF, this Agreement has been executed by the parties hereto.

CONTRACTOR

CONTRACTOR’S NAME (if other than an individual, state whether a corporation, partnership, etc.)

BY (Authorized Signature)

DATE SIGNED(Do not type)

PRINTED NAME AND TITLE OF PERSON SIGNING

ADDRESS

STATE OF CALIFORNIA

AGENCY NAME

California Prison Industry Authority BY (Authorized Signature)

DATE SIGNED(Do not type)

PRINTED NAME AND TITLE OF PERSON SIGNING

ADDRESS

560 East Natoma Street, Folsom, CA 95630 http://www.calpia.ca.gov/

STATEMENT OF WORK AND PAYMENT PROVISIONS

I. STATEMENT OF WORK

1. Contractor agrees to provide to California Prison Industry Authority bread pan straightening and resurfacing services as described herein:

A. The contractor shall furnish all labor, including travel and per diem, materials, non-consumable supplies, transportation, equipment and every other item of expense necessary to remove baked residue and old release coating, straighten and apply new release coating to Bakery Enterprise bottom loaf bread pans.

2. The services shall be performed at contractor’s place of business.

3. The services shall be provided during contractor’s normal working hours.

4. Service shall be available not later than the express date set by the awarding agency and the Contractor, after all approvals have been obtained and the agreement is fully executed. Should the Contractor fail to commence work at the agreed upon time, the California Prison Industry Authority, upon five (5) days written notice to the Contractor, reserves the right to terminate the agreement, effective immediately. In addition, the Contractor shall be liable to the CALPIA for the difference between Contractor's bid price and the actual cost of performing work by the second lowest bidder or by another contractor.

5. The project representatives during the term of this agreement will be:

State Agency: CALPIA Contractor:

Section/Unit: Bakery Section/Unit:

Attention: Attention:

Address: 480 Alta Road

San Diego, CA 92179 Address:

Phone: Phone:

Fax: Fax:

Email: Email:

6. Contractor shall furnish to the CALPIA a certificate of insurance, stating that there is Commercial General Liability, Worker’s Compensation and any other insurance the CALPIA deems appropriate under the contract, see General Provisions, Item 43.

7. Detailed description of work to be performed by Contractor:

A. Arrange with the CALPIA project representative to pick up 2,004 loaf bread pans from the RJ Donovan Bakery and transport to the Contractor’s place of business on a Thursday or Friday.

B. Dimensions of each pan:

12.75” x 5.0” top loaf 3.5” depth / 5 strap (5 molds across) 13.625” x 30.5” overall length

B. Straighten, remove old release coating, wash and dry, then apply new release coating to the bread pans.

C. Transport bread pans back to the CALPIA Warehouse at RJ Donovan Correctional Facility (RJD). Bread pans are to arrive back at RJD on a mutually agreed upon time between 0800 and 1630 hours.

D. The service, including pick-up and delivery, shall be completed within a 48 hour timeframe.

II. PAYMENT PROVISIONS

1. INVOICING AND PAYMENT

A. For services satisfactorily rendered, and upon receipt and approval of the invoices, the CALPIA agrees to compensate the Contractor in accordance with the rate specified herein:

Item No. Description of Work Unit of

Measure Unit price Extended Cost

Pick up, straighten, clean, re-glaze and return bread pans (5 molds per pan)

PAN $__________

per pan

Unit price x 2,004 pans

B. Invoices shall include the Agreement Number and shall be submitted in triplicate not more frequently than monthly in arrears to:

CALPIA Accounts Payable Attention:

PO Box 799006 San Diego, CA 92179-9006

2. AVAILABILITY OF FUNDS

All financial obligations of CALPIA for the fiscal year(s) encompassed by the term of this agreement are subject to the availability and approval of funding by the Prison Industry Board and/or the presence of sufficient funds to cover those obligations in the fund from which those obligations are to be paid. If such obligations are or become contingent on funding by and/or through the CALPIA budget or on the availability of federal funds or on the action of any Legislative body, said obligations are contingent on the appropriation and availability of funds for the purpose of meeting those obligations. If insufficient funds are approved or appropriated or otherwise available in order to meet CALPIA’s obligations under this agreement, CALPIA may immediately terminate this agreement.

3. PROMPT PAYMENT CLAUSE

Payment will be made in accordance with, and within the time specified in, Government Code Chapter 4.5, commencing with Section 927.

4. CASH DISCOUNTS

CALPIA has a history of taking cash discounts and intends to take advantage of cash discounts offered when they are in the best interest of the CALPIA.

Attachment 3

COST SHEET

The estimated quantities indicated below will be used solely for computing the cost to determine the best value bidder and is not binding upon the contracting agency. However, the actual costs quoted by the bidder shall be binding for the term of the Agreement. CALPIA is not obligated to purchase any quantity of services from the contractor.

It is unlawful for any person engaged in business within this state to sell or use any article or product as a “loss leader” as defined in Section 17030 of the Business and Professions Code.

Item No.

Description of Work Unit of Measure

Unit price Extended Cost

Pick up, straighten, clean, re-glaze and return bread pans (5 molds per pan)

PAN $________ per pan $________________ ( unit price x 2,004 pans)

See Bidders Instructions Item 26 for complete instructions on offering Cash Discounts.

_____% Cash discount for payment within __________ days of receipt.

For accounting reporting purposes, please provide the following information: Are you certified with the California Department of General Services, Office of Small Business Certification and Resources (OSBCR) as:

a. California Small Business Micro Business

Yes No Yes No If yes, enter certification number below: Expiration Date:

b. Disabled Veteran Business Enterprise

Yes No If yes, enter your service code below:

NAME OF

BIDDER:

COMPANY NAME

ADDRESS:

PHONE: FAX:

EMAIL:

AUTHORIZED

NAME: PLEASE PRINT

AUTHORIZED

SIGNATURE DATE:

TITLE:

INSTRUCTIONS: Complete all information on this form. Sign, date, and return to the State agency (department/office) address shown at the bottom of this page. Prompt return of this fully completed form will prevent delays when processing payments. Information provided in this form will be used by State agencies to prepare Information Returns (1099). See reverse side for more information and Privacy Statement.

NOTE: Governmental entities, federal, State, and local (including school districts), are not required to submit this form.

PAYEE’S LEGAL BUSINESS NAME (Type or Print)

SOLE PROPRIETOR – ENTER NAME AS SHOWN ON SSN (Last, First, M.I.) E-MAIL ADDRESS

MAILING ADDRESS BUSINESS ADDRESS

CITY, STATE, ZIP CODE CITY, STATE, ZIP CODE

PAYEE

ENTITY

TYPE

CHECK

ONE BOX

ONLY

ENTER FEDERAL EMPLOYER IDENTIFICATION NUMBER (FEIN): -

PARTNERSHIP CORPORATION: NOTE:

Payment will not be processed without an accompanying taxpayer I.D.

number

ESTATE OR TRUST

MEDICAL (e.g., dentistry, psychotherapy, chiropractic, etc.)

LEGAL (e.g., attorney services)

EXEMPT (nonprofit)

ALL OTHERS

INDIVIDUAL OR SOLE PROPRIETOR

ENTER SOCIAL SECURITY NUMBER: - -

(SSN required by authority of California Revenue and Tax Code Section 18646)

PAYEE

RESIDENCY

STATUS

California resident - Qualified to do business in California or maintains a permanent place of business in California.

California nonresident (see reverse side) - Payments to nonresidents for services may be subject to S tate income tax withholding.

No services performed in California.

Copy of Franchise Tax Board waiver of State withholding attached.

I hereby certify under penalty of perjury that the information provided on this document is true and correct.

Should my residency status change, I will promptly notify the State agency below.

AUTHORIZED PAYEE REPRESENTATIVE’S NAME (Type or Print) TITLE

SIGNATURE DATE TELEPHONE

Please return completed form to:

Department/Office: California Prison Industry Authority

Unit/Section: Business Services Section

Mailing Address: 560 East Natoma Street

City/State/Zip: Folsom, CA 95630

Telephone: Fax: (916) 358-1811

E-mail Address:

Requirement to Complete Payee Data Record, STD. 204

A completed Payee Data Record, STD. 204, is required for payments to all non-governmental entities and will be kept on file at each State agency. Since each State agency with which you do business must have a separate STD. 204 on file, it is possible for a payee to receive this form from various State agencies.

Payees who do not wish to complete the STD. 204 may elect to not do business with the State. If the payee does not complete the STD. 204 and the required payee data is not otherwise provided, payment may be reduced for federal backup withholding and nonresident State income tax withholding. Amounts reported on Information Returns (1099) are in accordance with the Internal Revenue Code and the California Revenue and Taxation Code.

Enter the payee’s legal business name. Sole proprietorships must also include the owner’s full name. An individual must list his/her full name. The mailing address should be the address at which the payee chooses to receive correspondence. Do not enter payment address or lock box information here.

Check the box that corresponds to the payee business type. Check only one box. Corporations must check the box that identifies the type of corporation. The State of California requires that all parties entering into business transactions that may lead to payment(s) from the State provide their Taxpayer Identification Number (TIN). The TIN is required by the California Revenue and Taxation Code Section 18646 to facilitate tax compliance enforcement activities and the preparation of Form 1099 and other information returns as required by the Internal Revenue Code Section 6109(a).

The TIN for individuals and sole proprietorships is the Social Security Number (SSN). Only partnerships, estates, trusts, and corporations will enter their Federal Employer Identification Number (FEIN).

Are you a California resident or nonresident?

A corporation will be defined as a "resident" if it has a permanent place of business in California or is qualified through the Secretary of State to do business in California.

A partnership is considered a resident partnership if it has a permanent place of business in California. An estate is a resident if the decedent was a California resident at time of death. A trust is a resident if at least one trustee is a California resident.

For individuals and sole proprietors, the term "resident" includes every individual who is in California for other than a temporary or transitory purpose and any individual domiciled in California who is absent for a temporary or transitory purpose. Generally, an individual who comes to California for a purpose that will extend over a long or indefinite period will be considered a resident. However, an individual who comes to perform a particular contract of short duration will be considered a nonresident.

Payments to all nonresidents may be subject to withholding. Nonresident payees performing services in California or receiving rent, lease, or royalty payments from property (real or personal) located in California will have 7% of their total payments withheld for State income taxes. However, no withholding is required if total payments to the payee are $1,500 or less for the calendar year.

For information on Nonresident Withholding, contact the Franchise Tax Board at the numbers listed below:

Withholding Services and Compliance Section: 1-888-792-4900 E-mail address: wscs.gen@ftb.ca.gov

For hearing impaired with TDD, call: 1-800-822-6268 Website: www.ftb.ca.gov

Provide the name, title, signature, and telephone number of the individual completing this form. Provide the date the form was completed.

6 This section must be completed by the State agency requesting the STD. 204.

Privacy Statement

Section 7(b) of the Privacy Act of 1974 (Public Law 93-579) requires that any federal, State, or local governmental agency, which requests an individual to disclose their social security account number, shall inform that individual whether that disclosure is mandatory or voluntary, by which statutory or other authority such number is solicited, and what uses will be made of it.

It is mandatory to furnish the information requested. Federal law requires that payment for which the requested information is not provided is subject to federal backup withholding and State law imposes noncompliance penalties of up to $20,000.

You have the right to access records containing your personal information, such as your SSN. To exercise that right, please contact the business services unit or the accounts payable unit of the State agency(ies) with which you transact that business.

All questions should be referred to the requesting State agency listed on the bottom front of this form.

Attachment 5

DARFUR CONTRACTING ACT CERTIFICATION

Public Contract Code Sections 10475 -10481 applies to any company that currently or within the previous three years has had business activities or other operations outside of the United States. For such a company to bid on or submit a proposal for a State of California contract, the company must certify that it is either a) not a scrutinized company; or b) a scrutinized company that has been granted permission by the Department of General Services to submit a proposal.

If your company has not, within the previous three years, had any business activities or other operations outside of the United States, initial here and return with your bid package. (Initial here_____)

OPTION #1 - CERTIFICATION

If your company, within the previous three years, has had business activities or other operations outside of the United States, in order to be eligible to submit a bid or proposal, please insert your company name and Federal ID Number and complete the certification below.

I, the official named below, CERTIFY UNDER PENALTY OF PERJURY that a) the prospective proposer/bidder named below is not a scrutinized company per Public Contract Code 10476; and b) I am duly authorized to legally bind the prospective proposer/bidder named below. This certification is made under the laws of the State of California.

Company/Vendor Name (Printed) Federal ID Number

By (Authorized Signature)

Printed Name and Title of Person Signing

Date Executed Executed in the County and State of

OPTION #2 – WRITTEN PERMISSION FROM DGS

Pursuant to Public Contract Code section 10477(b), the Director of the Department of General Services may permit a scrutinized company, on a case-by-case basis, to bid on or submit a proposal for a contract with a state agency for goods or services, if it is in the best interests of the state. If you are a scrutinized company that has obtained written permission from the DGS to submit a bid or proposal, complete the information below.

We are a scrutinized company as defined in Public Contract Code section 10476, but we have received written permission from the Department of General Services to submit a bid or proposal pursuant to Public Contract Code section 10477(b). A copy of the written permission from DGS is included with our bid or proposal.

Company/Vendor Name (Printed) Federal ID Number

Initials of Submitter

Printed Name and Title of Person Initialing

Attachment 6

EXPERIENCE/PAST PERFORMANCE (REFERENCES)

Submission of this attachment is mandatory. Failure to complete and return this form with your bid will cause your bid to be rejected and deemed non-responsive, unless otherwise instructed in the Bid Submission section.

1. List all references where similar types of services were performed within the last three (3) years. Use additional sheets for complete narrative of services provided. If three references cannot be provided, please explain why on an attached sheet of paper.

REFERENCE 1

Name of Firm Street Address City State Zip Code Contact Person Telephone Number Dates of Service Value or Cost of Service Brief Description of Service Provided

REFERENCE 2

Name of Firm Street Address City State Zip Code Contact Person Telephone Number Dates of Service Value or Cost of Service Brief Description of Service Provided

REFERENCE 3

Name of Firm Street Address City State Zip Code Contact Person Telephone Number Dates of Service Value or Cost of Service Brief Description of Service Provided

California Prison Industry Authority (CALPIA) IFB No. S04111589

Attachment 7

APPROPRIATE ATTIRE POLICY

Employees that are not required to wear a state approved uniform shall wear clothing that is conservative, professional and commensurate with their work environment, and does not pose potential injury while in the performance of their duties. All employees including, but not limited to contract employees, registry employees, volunteers, and off duty custody staff are expected to be in appropriate attire while on Institution grounds. Supervisors are responsible for monitoring their areas daily to ensure that employees are in compliance with this directive. Appropriate, progressive discipline may be taken for violations.

The following guidelines are to be applied:

1. Dresses and skirts must reach at the knee or below when standing, and worn in a professional and conservative manner.

2. Capri pants must reach below the knee.

3. Sleeveless garments (i.e., dresses and/or shirts) worn in a conservative and professional manner are permitted. However, these garments must be completely covered when worn in the presence of the inmate population (i.e. corridors, medical areas, housing units, etc.).

4. Spaghetti strapped garments (i.e., dresses, tops) are not permitted.

5. Leggings or any other footless style tights (spandex or cotton) worn under a dress, tunic or skirt are not permitted.

6. Any clothing containing emblems, quotes, lettering, or pictures pertaining to and/or depicting sex, politics, profanity, drugs, alcohol, violence, or illegal behavior are not permitted.

7. Shorts, skorts, tube tops, halter tops, pajama pants and/or lounging pants of any style are not permitted.

8. Sweat suits, jogging suits, nylon suits and/or velour suits are not permitted.

9. Any clothing similar to the state clothing colors worn by inmates, (blue chambray, blue denim or orange/white worn as a two-piece) is not permitted.

10. Camouflage clothing of any color is not permitted.

11. Clothing that exposes any part of the midriff is not permitted.

California Prison Industry Authority (CALPIA) IFB No. S04111589

12. All white blouses/shirts must be worn with the appropriate camisole or t-shirt underneath. In addition, the appropriate camisole or t-shirt shall be worn to avoid the perception of a plunging neck line.

13. Visible body piercings other than the ear lobes are not permitted (i.e., eyebrow, cheeks, nose, lip, tongue, etc.). Gauge earrings are not permitted.

14. Excluded Footwear Styles: strapless or any open-toe style shoe, boot or sandal that exposes more than two (2) toes is not permitted.

15. Acceptable Footwear Styles: closed toe or peep-toe style shoes, boot or sandal that exposes less than three (3) toes.

16. Employees that change their hair color or who wear colored extensions, hair pieces, or wigs that alters the appearance from their State identification card or driver's license picture must have authorization from the Watch Commander prior to entering the Institution.

17. Personal clothing shall not be left unattended at any time and shall be removed from the institution at the end of the employee's shift (i.e., sweaters, jackets, coats, scarves, etc.).

18. Safety precautions should be taken into consideration regarding the wearing of ties, scarves, jewelry, and hair ornaments.

19. Healthcare Staff: Chambray blue or blue denim scrubs are not permitted. Orange or white scrubs worn as a solid uniform could be viewed as inmate attire; therefore, these colors shall be worn as a solid bottom with a printed top or vice-versa. Scrubs shall only be worn by certified medical classifications. All laboratory coats must be clean, neat and display the name(s) of the provider(s) at all times. No laboratory coats shall display drug (pharmacy) logos or any other unacceptable emblems, quotes or pictures.

20. Employees will not be allowed entrance into the secure perimeter wearing inappropriate clothing. If a disagreement arises, the Watch Commander will be contacted. Only a manager has the authority to send an employee home to change clothing. Reasonable time will be allowed, and the employee will be docked for the time taken.