IFB 26-083 - Salt Barn (Buffalo).pdf
PDF 2 MB Posted
- Attached to
- IFB 26-083 - Salt Barn (Buffalo)
- Solicitation number
- 2140883
- Issued by
- Erie County, New York
About this file
Summary
This is an Invitation for Bid (IFB 26-083) issued by the New York State Office of Mental Health for the procurement of a salt storage barn at its Buffalo facility. The project requires excavation and subgrade preparation, geotextile fabric placement, stone base installation, concrete formwork and steel reinforcement, cast-in-place concrete slab and knee wall construction, placement of precast concrete interlocking blocks, erection of a steel-framed arch wall fabric shelter measuring 26 feet wide by 36 feet long by 12 feet 10¾ inches high, surface sealant application, and site restoration. Work must be completed within 45 calendar days of the notice to proceed, with shutdown days excluded if climate conditions necessitate suspension. The optional site visit is scheduled for November 23, 2026 at 11:00 a.m. ET, with registration due by November 19, 2026 at 3:00 p.m. ET. Written questions must be submitted by November 30, 2026 at 3:00 p.m. ET, with responses anticipated by December 3, 2026. Electronic bids are due December 8, 2026 by 3:00 p.m. ET. The contract is anticipated to commence upon Office of the State Comptroller approval on March 31, 2027.
Award will be made to the responsible and responsive bidder offering the lowest total bid amount who meets all mandatory requirements. The bid must remain firm for 120 days after the submission deadline. Prevailing wage rates apply to this public works project, and contractors must register with the New York State Department of Labor prior to bidding. Minority and Women-Owned Business Enterprise (MWBE) participation goals are set at 30 percent overall, and Service-Disabled Veteran-Owned Business (SDVOB) participation goals are set at 6 percent. Bidders must provide proof of New York State Workers' Compensation and Disability Benefits Insurance coverage, General Liability Insurance with limits of $1,000,000 per occurrence and $2,000,000 general aggregate, and proof of three years of business experience performing the required service type. Electronic payment through the Office of the State Comptroller is required unless otherwise authorized by OMH.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1 of 72 Revised (11/15/2024)
Invitation for Bid: IFB 26-083 For the procurement of: Salt Storage Barn (Buffalo)
EVENT DATES:
Return of Site Visit Registration Form (Attachment B): November 19, 2026 by 3PM ET
Optional Site Visit November 23, 2026 at 11A ET
Receipt of Questions from Potential Bidders: November 30, 2026 by 3PM ET
OMH Response to Questions Anticipated: Approx. December 3, 2026
Proposal Submission/No Bid Due Date and Time: December 8, 2026 by 3PM ET
Select/Non-Select Letters sent to appropriate Bidders As soon as possible after the bid opening
Bidder Protest Deadline:
OMH must receive no later than 7 business days after date on non-select letter
Anticipated Contract Start/End Dates: OSC Approval - 3/31/2027
Section 1: Scope of Work:
A) Scope: At site adjacent to Building 22, generally perform the following:
1) Excavate and place subbase,
2) Form and place concrete slab,
3) Place U-shaped enclosing knee wall using precast concrete interlocking bin blocks
4) Obtain and erect steel-framed arch wall fabric shelter
5) Grade and restore work area adjacent to site, image of original site condition included
B) Timeframe: Complete the work within 45 calendar days after notice to proceed. Where climate conditions necessitate suspension of work at the direction of the facility to ensure proper quality of concrete placing and curing, such shutdown days will be excluded from the 45 calendar day completion requirement.
C) Submittals: Provide three hard copies of the following for facility approval not less than 5 days prior to the related work. Include MSDS data where applicable:
1) Concrete mix data
2) Sealing and curing compounds
3) Joint sealants
4) Shelter structure
5) Precast blocks
D) Warranty: Provide one-year workmanship and materials warranty for the completed work, except provide shelter manufacturer’s standard warranty for framing and fabric.
E) Products
1. Subgrade Material- #2 crusher run stone
2. Geotextile fabric- Non-woven type, 8 ounce
3. Concrete- 4,500 psi, See following detailed specification section
4. Reinforcing- #4 epoxy-coated bars. See following detailed specification section
5. Joint sealants- One part, self-leveling polyurethane similar to Sikaflex
6. Surface sealant- Penetrating siloxane sealer, Sika H1000
7. Pre-cast blocks- standard plant produced precast “bin” blocks with interlocking edges in 24H” x 24W”
2 of 72 Revised (11/15/2024) and 24” or 36” or 72” length. One side to be cast with rock face pattern.
8. Fabric structure- Steel framed, arch wall fabric covered field assembled structure having one end closed. Manufacturer’s standard product offering with all necessary anchoring accessories to erect and secure to precast block knee wall. Size is 26 feet wide, by 36 feet long, and 12’-10 3/4” feet high (not including enclosing knee wall height). Fabric is 12.5 ounce 24mil and color to be white. Erected structure to be in accordance with wind and snow loading minimum requirements for Buffalo, NY.
Structure to be the standard product of ClearSpan or approved equal.
F) Execution
1. Excavate at area shown on attached “Attachment 1 - Excavation Plans”. Dispose of spoil offsite. Place geotextile fabric at excavation prior to placement and compacting subgrade material.
2. Form slab to dimensions at location shown. Maintain indicated slope for drainage away from structure.
3. Install reinforcing members as shown on attached sketch and in accordance with the detailed specification.
4. Place, protect, cure, finish, etc. concrete in accordance with the detailed specification.
5. Provide saw cut control joints sectioned in a 10’ x 10’ windowpane pattern. Joints to be 1/8” wide and at a depth of 25% of slab thickness. Fill joints with specified joint sealer.
6. Place precast environmental blocks to provide the dimensions shown. Orient rockface decorative surface outward. Utilize a one-half unit running bond except where needed to accommodate ends and corners. Vertical joints in courses shall be staggered not less 12 inches Outside corner courses shall be interlaced.
7. Erect structurer in accordance with the manufacturer printed directions using manufacturer-provided or recommended accessories and fasteners.
8. Restore grade and lawn at work area.
Section 2: CONSTRUCTION SPECIFICATIONS
PART 1 GENERAL
1.01 RELATED WORK SPECIFIED ELSEWHERE
A. Concrete Formwork: Section 031100.
1.02 REFERENCES
A. Except as shown or specified otherwise, the Work of this Section shall conform to the applicable requirements of the following:
1. Specifications for Structural Concrete, ACI 301-16 of the American Concrete Institute
(ACI).
2. Manual of Standard Practice, MSP-1-01 of the Concrete Reinforcing Steel Institute
(CRSI).
3 of 72 Revised (11/15/2024)
1.03 DELIVERY, STORAGE, AND HANDLING
A. Epoxy-Coated Bar Reinforcement: Deliver, store and handle reinforcement in accordance with fabricator’s recommendations and as specified.
1. Use padded or nylon bundling bands.
2. Lift and hoist bundles of bars with nylon or padded wire rope slings at the third points or use spreader bars.
3. Store bars on wood or padded cribbing.
4. Do not drop bars, and do not drag bars over the ground or over other bars.
PART 2 PRODUCTS
2.01 MATERIALS
A. Epoxy-Coated Bar Reinforcement: ASTM A 775.
1. Epoxy Coating Patching Material: ASTM A 775.
B. Bar Supports for Epoxy-Coated Bar Reinforcement: Bar supports made of dielectric material compatible with concrete, or wire bar supports coated with dielectric material compatible with concrete for a minimum distance of 2 inches from the point of contact with the reinforcing bar.
1. Reinforcing bars used as support bars and spreader bars shall be epoxy-coated.
C. Tie Wire for Epoxy-Coated Reinforcement: Wire coated with nylon, plastic or epoxy.
PART 3 EXECUTION
3.01 PLACING
A. ACI 5.5.12 Epoxy-Coated Reinforcement:
1. 5.5.12.1 Field Bending: Field bending shall be done by cold methods only, and only when ambient and bar temperatures are 40 degrees F or higher. Epoxy coating damaged by field bending shall be repaired, or the damaged reinforcement shall be replaced, in accordance with specified tolerances.
2. 5.5.12.2 Field Repair: Repair damaged epoxy coating with epoxy coating patching material in accordance with the material manufacturer’s recommendations. Also coat cut ends, welds, and steel splice members if such procedures are permitted.
3. 5.5.12.3 Tolerances for Coating Damage: Coating damage need not be repaired where the damaged area is less than 0.1 square inch. The maximum amount of coating damage, including repaired and unrepaired areas, shall not exceed 2 percent of the surface area of the bar.
4 of 72 Revised (11/15/2024)
Section 3: CAST-IN-PLACE CONCRETE SPECIFICATIONS
PART 1 GENERAL
1.01 RELATED WORK SPECIFIED ELSEWHERE
A. Steel Concrete Reinforcement: Section 032100.
1.02 REFERENCES
A. Except as shown or specified otherwise, the Work of this Section shall conform to the requirements of American Concrete Institute (ACI) and American Society for Testing and Materials (ASTM) documents.
1. ACI 117-10: Specifications for Tolerances in Concrete Construction and Materials
2. ACI 212.3R-10: Report on Chemical Admixtures for Concrete; Chapter 15 Permeability Reducing Admixtures
3. ACI 301-16: Specification for Structural Concrete for Buildings.
4. ACI 304.2R-96: Placing Concrete by Pumping Methods.
5. ACI 305R-10: Guide for Hot Weather Concreting.
6. ACI 306R-10: Guide to Cold Weather Concreting.
7. ACI 308.1-11: Standard Specification for Curing Concrete.
8. ACI 318 -14 Building Code Requirements for Structural Concrete.
9. ASTM C 94/C 94M – 11b: Standard Specification for Ready- Mixed Concrete.
10. ASTM C 494/C 494M - 11: Standard Specification for Chemical Admixtures for Concrete.
1.03 DEFINITIONS
A. ACI 301, Section 1.2 - Definitions:
1. Add the following definitions:
a. Cementitious Material: Cementitious materials include cement, ground blast furnace slag and fly ash.
b. Corrosion Inhibitor Admixture: A liquid admixture, calcium nitrite that inhibits corrosion of concrete-embedded steel in the presence of chloride ions.
c. Pumped Concrete: Concrete that is conveyed by pumping pressure through rigid pipe or flexible hose.
d. Water-to-Cementitious Ratio (w/c): A ratio representing quantity in pounds of free moisture available for cement hydration divided by quantity of cementitious materials in pounds per cubic yard concrete.
5 of 72 Revised (11/15/2024)
1.04 SUBMITTALS
A. Submittals Package: Submit product data for design mix(es) and materials for concrete specified below at the same time as a package.
B. Certifications: Affidavit by the bar reinforcement manufacturer certifying that bar material meets the contract requirements.
1. Submit evidence of steel material compliance with this Specification. Evidence shall consist of certification of source of material, copies of purchase orders and manufacturer's certifications. For stock material, submit copies of latest mill or purchase orders for material replacement.
C. Shop Drawings: Placing drawings for bar reinforcement.
D. Product Data:
1. Mix Design: Submit proposed concrete design mix(es) together with name and location of batching plant at least 5 days prior to the start of concrete work.
a. Include test results of proposed concrete proportions based on previous field experience or laboratory trial batches in accordance with ACI 301, Section 4.
2. Portland Cement: Brand and manufacturer’s name.
3. Fly Ash: Name and location of source, and DOT test numbers.
4. Air-entraining Admixture: Brand and manufacturer’s name.
5. Water-reducing Admixture: Brand and manufacturer’s name.
6. High Range Water-reducing Admixture (Superplasticizer): Brand and manufacturer’s name.
7. Corrosion Inhibitor Admixture: Brand and manufacturer’s name.
8. Accelerating Admixture: Brand and manufacturer’s name.
9. Aggregates: Name and location of source, and DOT test numbers.
10. Chemical Hardener (Dustproofing): Brand and manufacturer’s name, and application instructions.
12. Chemical Curing and Anti-Spalling Compound: Brand and manufacturer’s name, and application instructions.
13. Bonding Agent (Adhesive): Brand and manufacturer’s name, and preparation and application instructions.
E. Quality Control Submittals:
1. Batching Plant Records: At the end of each day of placing concrete, furnish the facility with a legible copy of all batch records for the concrete placed.
6 of 72 Revised (11/15/2024)
1.05 QUALITY ASSURANCE
A. Concrete batching plants shall be currently approved as concrete suppliers by the New York State Department of Transportation.
B. Truck mixers for concrete shall be currently approved by the New York State Department of Transportation.
C. Fly ash supplier shall be on the New York State Department of Transportation’s current “Approved List of Suppliers of Fly Ash”.
D. ACI 301, Section 1.4 Reference standards and cited publications:
1. Add the following to the list of ASTM Standards:
C 311-11a Standard Methods of Sampling and Testing Fly Ash or Natural Pozzolans For Use As A Mineral Admixture in Portland Cement Concrete
1.06 DELIVERY
A. ASTM C 94/C 94M, Article 14 - Batch Ticket Information: In addition to the information required by Paragraph 14.1, also include the following:
1. Type and brand, and amount of cement.
2. Weights of fine and coarse aggregates.
3. Class and brand, and amount of fly ash (if any).
PART 2 PRODUCTS
2.01 MATERIALS
A) Cement: ASTM C 150, Type I or II Portland cement.
B) Water: Potable
C) Air-entraining Admixture: ASTM C 260, and on the New York State Department of Transportation’s current “Approved List”.
D) Water-reducing Admixture: ASTM C 494/C 494M, Type A, and on the New York State Department of Transportation’s current “Approved List”.
E) High Range Water-reducing Admixture (Superplasticizer): ASTM C 494/C 494M, Type F, and on the New York State Department of Transportation’s current “Approved List”.
F) Corrosion-Inhibiting Admixture: ASTM C 494/C 494M, for use in resisting corrosion of steel reinforcement.
1. DCI Corrosion Inhibitor by W. R. Grace & Co., - Conn., 62 Whittemore Ave., Cambridge, MA 02140, (617) 876-1400 and MasterLife CNI by Master Builders/ BASF Building Systems, 23700 Chagrin Blvd., Cleveland, OH 44122, (800) 628- 9990.
2. DCI - S Corrosion Inhibitor by W. R. Grace & Co., - Conn., 62 Whittemore Ave., Cambridge, MA 02140, (617) 876-1400.
7 of 72 Revised (11/15/2024)
G) Retarding Admixture: ASTM C 494, Type D, Water-reducing and retarding, for use in hot weather concreting, and on the New York State Department of Transportation’s current “Approved List”.
H) Accelerating Admixture: Non-corrosive admixture, containing no chloride, complying with ASTM C 494, Type C or E, and on the New York State Department of Transportation’s current “Approved List”.
I) Fly Ash: ASTM C 618, including Table 1 (except for footnote A), Class F except that loss on ignition shall not exceed 4.0 percent.
J) Moisture-Retaining Cover: Waterproof paper, polyethylene film, or polyethylene-coated burlap complying with ASTM C 171
K) Chemical Curing and Anti-Spalling Compound: ASTM C-309, Type 1D, Class B, with a minimum 18 percent total solids content. No thinning of material allowed.
1. SureCure Emulsion, Kaufman Products, Inc. 3811 Curtis Avenue, Baltimore, MD 21226, (800) 637-6372.
2. Cure & Seal by Symons Corp., 200 East Touhy Ave., PO Box 5018, Des Plaines, IL 60017-5018, (847) 298-3200.
3. MasterKure CC 180 WB by Master Builders/ BASF Building Systems, 23700 Chagrin Blvd., Cleveland, OH 44122, (800) 628-9990.
4. Cure & Seal 25 UV (J-22 UV) by Dayton Superior Corp., 1125 Byers Rd.,., Miamisburg, OH 45342, (800) 745-3700.
5. Acrylseal HS by Master Builders/ BASF Building Systems, 23700 Chagrin Blvd., Cleveland, OH 44122, (800) 628-9990.
L) Chemical Hardener (Dustproofing): Colorless aqueous solution of magnesium-zinc fluosilicate.
1. MasterKure HD 300WB by Master Builders/ BASF Building Systems, 23700 Chagrin Blvd., Cleveland, OH 44122, (800) 628-9990..
2. Surfhard by The Euclid Chemical Co., 19218 Redwood Rd., Cleveland, OH 44110, (216) 531-9222.
3. Liqui-Hard by W.R. Meadows, Inc., PO Box 543, Elgin, IL 60121, (847) 683-
4. FluoHard by L & M Construction Chemicals, Inc., 14851 Calhoun Rd., Omaha, NE 68152, (402) 453-6600.
5. Armortop by Anti Hydro International, Inc., 265 Badger Ave., Newark, NJ 07108,
(800) 777-1773.
6. Diamond by Kaufman Products , Inc., 3811 Curtis Avenue, Baltimore, MD 21226,
(800) 637-6372.
M) Epoxy Bonding Agent (Adhesive): 100 percent solids epoxy-resin-base bonding compound, complying with ASTM C 881, Types I, II, IV and V, Grade 2 (horizontal areas) or Grade 3 (overhead/vertical areas), and Class B (40-60 degrees Fahrenheit) or Class C (60 degree Fahrenheit and above).
8 of 72 Revised (11/15/2024)
1. SurePoxy HM Series by Kaufman Products, Inc., 3811 Curtis Avenue, Baltimore, MD 21226, (800) 637-6372.
2. Sikadur Hi-Mod 32 by Sika Corporation, 201 Polito Avenue, Lyndhurst, NJ 07071, (800) 933-7452.
3. MasterEmaco ADH 327 RS by by Master Builders/ BASF Building Systems, 23700 Chagrin Blvd., Cleveland, OH 44122, (800) 628-9990.
2.02 PROPORTIONING OF MIXES
A) Cast-in-place concrete shall be air-entrained normal weight concrete except where lightweight concrete is indicated on the drawings.
1. Normal weight concrete, except as otherwise specified, shall have a minimum compressive strength of 5000psi as required by ACI 318-14 Table 19.3.2.1.“Requirements for concrete exposed to cycles of freezing and thawing”.
Slump: Maximum 4 inches; minimum 2 inches before the addition of any water-reducing admixtures or high-range water-reducing admixtures (superplasticizers) at the Site.
2. Optional Material: Fly ash may be substituted for (Portland) cement in normal weight and lightweight concrete up to a maximum of 15 percent by weight of the required minimum (Portland) cement. If fly ash is incorporated in a concrete design mix, make necessary adjustments to the design mix to compensate for the use of fly ash as a partial replacement for (Portland) cement.
a. Adjustments shall include the required increase in air-entraining admixture to provide the specified air content.
b. Lower early strength of the concrete shall be considered in deciding when to remove formwork.
B) Design Air Content: Design air content for concrete shall be according to ACI 318-14 Table 19.3.3.1 “Total air content for concrete exposed to cycles of freezing and thawing” with an allowable tolerance of plus or minus 1.5 percent for total air content, except as otherwise specified. Use air-entraining admixture, not air-entrained cement.
C) Water-Cement Ratio: Cast-in-place concrete shall have a maximum water-cement ratio as required by ACI 318-14 Table 19.3.2.1“Requirements for concrete by exposure class”.
D) ACI 301, Section 4.2.2.3: Change article to read as follows:
2.03 4.2.2.3 - Size of Coarse Aggregates:
A) 4.2.2.3.a Normal Weight Concrete: Coarse aggregates shall conform to graduation requirements for various sizes as tabulated in Table No. 2 of ASTM C 33. The sizes of coarse aggregates for various classes of Work shall be as follows with all percentages being determined by weight.
B) 4.2.2.3.b For concrete floors, floor and roof slabs, reinforced beams and girders, columns and piles, concrete encasing underground electric conduits, and concrete in which the space between restricting objects is 2 inches or less, the course aggregate shall be Size No. 67.
C) 4.2.2.3.c For other concrete Work having a minimum cross-sectional dimension of not more than 6 inches, the coarse aggregate shall be a well graded mixture of No. 67 and
9 of 72 Revised (11/15/2024)
No. 57, provided that not more than 50 percent nor less than 30 percent shall be Size No. 67 and not more than 70 percent nor less than 50 percent shall be Size No. 57.
D) 4.2.2.3.d For other concrete Work having a minimum cross-sectional dimension greater than 6 inches and not more than 12 inches, the coarse aggregate shall consist of a mixture of No. 67, No. 57 and No. 467, providing that not more than 25 percent nor less than 10 percent shall be Size No. 67 and not more than 40 percent shall be Size No.
467.
E) 4.2.2.3.e For other concrete Work having a minimum cross-sectional dimension of more than 12 inches, the coarse aggregate shall consist of a mixture of No. 67, No. 57 and No. 357, providing not more than 25 percent nor less than 10 percent shall be Size No.
67 and not more than 40 percent shall be Size No. 357.
F) 4.2.2.3.f Lightweight Concrete: Lightweight aggregates shall be graded from 3/4 inch to No. 4 sieve size in conformance with Table No. 1 of ASTM C 330.
G) Do not use admixtures unless specified or approved by the facility
PART 3 EXECUTION
3.01 EXAMINATION AND PREPARATION
A. Do not use items of aluminum for mixing, chuting, conveying, forming or finishing concrete, except magnesium alloy tools may be used for finishing.
B. Check items of aluminum required to be embedded in the concrete and insure that they are coated, painted or otherwise isolated in an approved manner.
C. Hardened concrete, reinforcement, forms, and earth which will be in contact with fresh concrete shall be free from frost at the time of concrete placement.
D. Do not deposit concrete in water. Keep excavations free of water by pumping or by other approved methods.
E. Prior to placement of concrete, remove all hardened concrete spillage and foreign materials from the space to be occupied by the concrete.
F. Prior to placement of a concrete install polyethylene or other preventative measures to mitigate exposure to external moisture sources such as rainwater; runoff from adjacent slopes; landscaping water; water from curing; or wet grinding, sawing, and cleaning.
3.02 ADMIXTURE ADDITIONS AT THE SITE
A. Site additions shall be limited to high-range water-reducers, non-chloride accelerators, and corrosion inhibitors. Comply with manufacturers’ printed instructions for discharge of admixtures shall be furnished.
B. High-Range Water-Reducers:
1. Concrete shall arrive at a slump of 2 to 4 inches (50 to 100 mm). Water additions at the Site shall be limited to comply with water-to-cementitious ratio requirements.
10 of 72 Revised (11/15/2024)
2. Following addition of high-range water-reduced concrete, a minimum of 70 revolutions or 5 minutes of mixing shall be completed to assure a consistent mixture.
C. All concrete with other admixture additions shall mix a minimum of 70 revolutions or 5 minutes to assure a consistent mixture.
3.03 PLACING
A. ACI 301, Section 5.3.2.2 - Conveying:
1. Add the following paragraph:
a. Operation of truck mixers and agitators and discharge limitations shall conform to the requirements of ASTM C 94.
B. ACI 301, Section 5.3.2.4 - Depositing:
1. Add the following paragraph:
a. Do not allow concrete to free fall more than 4 feet
3.04 REPAIRING SURFACE DEFECTS
A. ACI 301, Section 5.3.7 – Repair of surface defects:
1. Add the following paragraph:
a. 5.3.7.1.a Finish patched areas to match the texture of the surrounding surface.
3.05 FINISHING FORMED SURFACES
A. Finish Schedule: Except where indicated otherwise on the Drawings, provide the finishes below:
1. Rough Form Finish for concrete surfaces not exposed to view.
2. Smooth Form Finish for concrete surfaces exposed to view.
3.06 CURING AND PROTECTION
A. Hot Weather Concreting: Comply with ACI 305R whenever the atmospheric temperature or the form surface temperature is at or above 90 degrees F., or climatic conditions of wind and/or low humidity will cause premature drying of the concrete.
B. Curing Temperature: Maintain the temperature of the concrete at 50 degrees F. or above during the curing period. Keep the concrete temperature as uniform as possible and protect from rapid atmospheric temperature changes. Avoid temperature changes in concrete which exceeds 5 degrees F. in any one hour and 50 degrees F. in any 24-hour period.
3.07 FIELD QUALITY CONTROL
A. Adjustment to Concrete Mixes: Mix design adjustments may be requested by the Contractor when characteristics of materials, job conditions, weather, test results, or
11 of 72 Revised (11/15/2024) other circumstances warrant, at no additional cost to the State and as accepted by the facility. Laboratory test data for revised mix design and strength results must be submitted to and accepted by the Director’s Representative before using in the work.
12 of 72 Revised (11/15/2024)
1. Issuing Office/Permissible Contacts:
The issuing office named below is the sole point of contact in the State for matters related to this IFB.
Pursuant to State Finance Law 139-j and 139-k, this IFB includes and imposes certain restrictions on communications between OMH and an Offeror/bidder during the procurement process. Please reference Attachment J, Summary of OMH Procurement Lobbying Guidelines, included with this solicitation.
Attention: Tyler Bielawski / Leonard Nauta
Title:
Contract Management Specialist 1 / Contract Management Specialist 2
Facility Name NYS Office of Mental Health
Address:
75 New Scotland Avenue Albany, NY 12208
Phone: 518-549-1609 / 518-549-1794 E-Mail: Tyler.Bielawski@omh.ny.gov / Leonard.Nauta@omh.ny.gov
2. Site Visit:
Does apply to this solicitation.
A Optional site visit is scheduled for November 23, 2026 at 11A ET . Directions are available at the OMH website http://www.omh.ny.gov – type “directions” at search option, hit go. Interested bidders are to sign in at 1010 East and West Road, West Seneca NY, 14224, behind the building by the maintenance department. No one will be admitted to the conference or site visit after the time cited above.
Site visit registration can be accomplished by completing and sending Attachment B, Site Visit Registration Form, no later than November 19, 2026 by 3PM ET.
3. Questions and Answers:
Questions answered during the site visit will not be considered official responses. All questions must be submitted in writing by the bidder. All eligible bidders will receive an email containing the official responses to all questions received by the due date.
All written questions regarding this solicitation must be sent to bids@omh.ny.gov via e-mail only by November 30, 2026 by 3PM ET . Questions and answers will be accumulated by NYS Office of Mental Health and sent to all potential bidders by Approx. December 3, 2026 . Questions and Answers will also be posted to the New York State Contract Reporter Ad.
4. MWBE/EEO/SDVOB Participation Requirements:
Minority and Woman Business Enterprises (MWBE), Equal Employment Opportunity (EEO), and Service- Disabled Veteran Owned Business (SDVOB) program requirements are set forth in Attachment A.
5. New York State Business Usage Requirements:
Encouraging New York State Businesses in performance of Contracts as set forth in Attachment A-3 and Attachment N.
6. Response Date:
Electronic bids must be submitted to the Issuing Office via email by the bid submission due date and time.
No facsimile, hard copy, cloud-based storage service(or similar) bids will be accepted. It is the Bidder’s responsibility to ensure that the Electronic bid is received by the Issuing Office by the due date and time.
13 of 72 Revised (11/15/2024)
Electronic bids received by the Issuing Office must conform with the information and submission formats requested herein, or attached hereto, under the terms and conditions of this solicitation. Electronic bids received after the Proposal Submission date or time will be disqualified from consideration. Electronic bids will not be opened by the Issuing Office until after the Proposal Submission due date and time.
The OMH will provide a confirmation email that the electronic bid has been received.
The email subject line must include the following information: The Solicitation Number and Vendor Name. If bid requires files be sent in multiple emails, indicate the email number, e.g. 1 of 2.
Electronic Bids must be emailed to: bids@omh.ny.gov
If you cannot bid for this solicitation, please return Attachment B-1, No Bid Explanation Form, as per instructions no later than the bid due date and time.
Bids that are illegible, incomplete, or that contain any omissions, erasures, alterations, additions or items not called for in the solicitation or that contain irregularities of any kind may be rejected. All costs associated with the preparation of a bid are the responsibility of the Bidders. Bidders may modify, in writing, the content of any bid at any time prior to the bid due date and time. Bids may be withdrawn or canceled before the bid due date and time.
7. Determination/Method of Award:
The purchase order will be awarded to the responsible and responsive Bidder offering the lowest total bid amount and who also meets all minimum mandatory requirements, as defined in Section 9 below. OMH reserves the right to evaluate and/or reject all bids, in whole or in part, and to waive or modify technicalities, irregularities, and omissions, or solicit new bids if, in the agency’s sole judgment, the best interest of the State will be served. Following contractor selections and prior to issuing a purchase order, OMH reserves the right to further negotiate cost or other specifics.
In the case of tied bids between two or more bidders, OMH shall select the tied Bidder who has been in business for the most number of years.
8. Mandatory Bid Submission Requirements:
A. The submission of a bid constitutes a binding offer to perform said services in accordance with or exceeding all mandatory requirements outlined in this IFB and in the OMH contract boilerplate. Such binding offer shall be firm and not revocable for a period of 120 days after the deadline for bid submission and will continue thereafter until the Successful Offeror notifies OMH otherwise in writing.
Such deadline may be extended further by mutual agreement between the Successful Offeror and
OMH.
B. Bidders and/or any proposed subcontractors MUST NOT have had a prior New York State contract terminated for cause within the past three years.
C. Documentation that must be submitted by Bidders on or before the bid due date, if applicable (Place the completed Bid Submission Checklist first in the bid package) OMH reserves the right to disqualify any bid that does not include the required documents:
1) Attachment C – Solicitation Cover Sheet: must be used as the first page/cover sheet.
2) Include proof of having been in business performing the required type of service for at least 3 years.
3) Complete Form ST-220-CA Contractor Certification. The Contractor must file Form ST-220-CA
14 of 72 Revised (11/15/2024) to certify that it has filed Form ST-220-TD with the Tax Department and that the information contained on Form ST-220-TD is correct and complete as of the date that the Contractor files Form ST-220-CA. Access and complete Form ST-220-CA by using the following link:
http://www.tax.ny.gov/pdf/current_forms/st/st220ca_fill_in.pdf
Please note that Form ST-200-TD must be filed with the NYS Tax Department at the address on the front page of the form. You can access Form ST-220-TD using the following link:
http://www.tax.ny.gov/pdf/current_forms/st/st220td_fill_in.pdf
For Questions and Answers Concerning Tax Law Section 5-a, go to NYS Department of Tax and Finance at http://www.tax.ny.gov/pdf/publications/sales/pub223.pdf .
4) Attachment D – Bid Quote Sheet: Bids shall be submitted utilizing this form only.
5) Attachment E – Non-Collusive Bidding Certificate: Complete and return with bid. Required by Section 139-D of the State Finance Law
6) Attachment F – Business References: Provide three (3) Business References. Include any NY State Agencies, if applicable.
7) Attachment G – Vendor Responsibility Questionnaire: Complete either hard copy or online Please refer to Attachment G for a detailed explanation and links to the most current forms to use.
8) Obtain a Vendor Registration Number if you are not already registered to do business with New York State entities. Access the link in Attachment G for the Substitute W-9. Complete the online form electronically, download the completed form, and sign in the designated area. Return the completed W-9 with the other bid documents to the designated individual at the OMH facility.
All vendors are required to have a vendor registration number to do business with New York State.
9) Attachments J-1 and J-2: Complete Offeror’s Affirmation of Understanding (J-1) OMH Offeror Disclosure of Prior Non-Responsibility Determinations/Attachment (J-2).
10) Attachment A-2 – MWBE Goals and EEO Policy Statement: Complete per the instructions.
11) Attachment K - EEO Employment Opportunity Staffing Plan: Complete and return with bid.
12) Attachment L – MWBE Utilization Plan: If M/WBE goals have been established in Attachment A, then complete and return with bid.
13) Attachment L-1 – Application for Waiver of MWBE Goals (if applicable): Complete if MWBE participation goals cannot be met and good faith efforts have been performed.
14) Attachment M – SDVOB Contractor Utilization Plan: If SDVOB goals have been established in Attachment A, then complete and return with bid.
15) Attachment M-1 – Application for Waiver of SDVOB Goals (if applicable): Complete if SDVOB participation goals cannot be met and good faith efforts have been performed.
16) Attachment A-3: Encouraging the Use of New York State Subcontractors and Supplies (if applicable).
17) Attachment N – New York State Business Usage Form (if applicable).
15 of 72 Revised (11/15/2024)
18) Attachment O – Sexual Harassment Prevention Certification: Complete and return with bid.
19) Attachment P – Gender-Based Violence and the Workplace Certification: Complete and return with bid (model policy available upon request to the designated contact).
20) Attachment Q – Prohibiting State Agencies and Authorities from Contracting with Businesses Conducting Business in Russia: Complete and return with bid.
21) Proof of insurance and licensing as stated in this document.
22) If required, provide verification of being registered to conduct business in New York State or State of Corporate main office. For NYS verification, go to NYS Department of State at www.dos.ny.gov;
for any other state, go to that state’s licensing agency.
23) Submit proof of coverage for New York State Workers’ Compensation & Disability Benefits Insurance as explained in Section 10 of this IFB.
24) If required, provide proof of a valid Certificate of Registration with the NYS Department of Labor, as explained in Section 14 of this IFB.
9. New York State Worker Compensation & Disability Benefits Insurance Requirements:
A. Workers’ Compensation Requirement: Section 57 of the New York State Workers Compensation Law (WCL) requires that State and municipal entities prior to entering into a contract must ensure that the contractor applying for that contract has appropriate New York State Workers’ Compensation Insurance coverage.
Therefore, as part of your bid submission, you must provide one of the following forms to meet this requirement. Failure to submit one of these forms may result in rejection of your bid.
1) CE-200 Certificate of Attestation For New York Entities With No Employees And Certain Out Of State Entities, That New York State Workers’ Compensation and/or Disability Benefits Insurance Coverage Is Not Required:
Form CE-200 can be filled out electronically on the New York State Workers Compensation Board’s website, http://www.wcb.ny.gov/ , under the heading “Forms.” Applicants filling electronically are able to print a finished Form CE-200 immediately upon, completion of the electronic application.
Applicants without access to a computer may obtain a paper application for the CE-200 by writing or visiting the Customer Service Center at any District Office of the Workers Compensation Board.
Applicants using the manual process may wait up to four (4) weeks before receiving a CE-200.
OR
2) C-105.2 Certificate of Workers’ Compensation Insurance (the contractor’s insurance carrier provides this form) PLEASE NOTE: The New York State Insurance Fund provides its own version of this form, the U-26.3;
OR
3) SI-12 Certificate of Workers’ Compensation Self-Insurance (To obtain this form, the contractor needs to call the New York State Workers’ Compensation Board, Self-Insurance Office at 518-402- 0247), OR GSI-105.2 – Certificate of Participation in Workers’ Compensation Group Self- Insurance (The Contractors Group Self-Insurer will provide this form).
B. Disability Benefit Insurance Requirement: Section 220(8) of the New York State Workers’
16 of 72 Revised (11/15/2024)
Compensation Law (WCL) requires that State and municipal entities prior to entering into a contract must ensure that the contractor applying for that contract has appropriate New York State disability benefits insurance.
All bidders as part of their bid submission must submit one of the following forms in order to meet this requirement. Failure to provide one of these forms may result in your bid being disqualified.
1) CE-200 Certificate of Attestation For New York Entities With No Employees And Certain Out Of State Entities, That New York State Workers Compensation And/or Disability Benefits Insurance Coverage Is Not Required:
Form CE-200 can be filled out electronically on the New York State Workers Compensation Board’s website, http://www.wcb.ny.gov/ , under the heading “Forms.” Applicants filling electronically are able to print a finished Form CE-200 immediately upon, completion of the electronic application.
Applicants without access to a computer may obtain a paper application for the CE-200 by writing or visiting the Customer Service Center at any District Office of the Workers Compensation Board.
Applicants using the manual process may wait up to four (4) weeks before receiving a CE-200.
OR
2) DB-120.1 Certificate of Disability Benefits Insurance (the contractor’s insurance carrier provides this form);
OR
3) DB-155 Certificate of Disability Benefits Self-Insurance (To obtain this form the contractor needs to call the New York State Workers Compensation Board’s Self-Insurance Office at 518-402-0247).
10. Additional Insurance Requirement:
Prior to the start of work, the Contractor shall procure at its sole cost and expense, and shall maintain in force at all times during the term of this Agreement, policies of insurance as herein below set forth, written by companies authorized by the New York State Insurance Department to issue insurance in the State of New York with an A.M. Best Company rating of ―A-ǁ or better. The OMH may, at its sole discretion, accept policies of insurance written by a non-authorized carrier or carriers when Certificates and/or other policy documentation is accompanied by a completed Excess Lines Association of New York (ELANY) Affidavit;
provided that nothing herein shall be construed to require the Agency to accept insurance placed with a non-authorized carrier under any circumstances.
The Contractor shall deliver to OMH evidence of such policies in a form acceptable to the OMH. These policies must be written in accordance with the requirements of the paragraphs below, as applicable.
General Conditions
A. Conditions Applicable to Insurance. All policies of insurance required by this agreement must meet the following requirements:
1) Coverage Types and Policy Limits. The types of coverage and policy limits required from the Contractor are specified below.
2) Policy Forms. Except as may be otherwise specifically provided herein or agreed in writing by OMH, policies must be written on an occurrence basis. Under certain circumstances, the OMH may elect to accept policies written on a claims-made basis provided that, at a minimum, the policy remains in force throughout the performance of the services and for three (3) years after completion of the Contract. If the policy is cancelled or not renewed during that time, the Contractor must purchase at its sole expense Discovery Clause coverage sufficient to complete the 3-year period
17 of 72 Revised (11/15/2024) after completion of the Contract. Written proof of this extended reporting period must be provided to the Agency prior to the policy’s expiration or cancellation.
3) Certificates of Insurance/Notices. Contractor shall provide a Certificate or Certificates of Insurance, in a form satisfactory to the OMH, before commencing any work under this contract.
Certificates shall reference the Bid Number. Certificates shall be mailed to the:
NYS Office of Mental Health Bureau of Procurement Enterprise Services
75 New Scotland Avenue, Unit R - Lower Albany, NY 12208
Unless otherwise agreed, policies shall be written so as to include a provision that the policy will not be canceled, materially changed, or not renewed without at least thirty (30) days prior written notice except for non-payment as required by law to the OMH, Attn: NYS Office of Mental Health, 75 New Scotland Avenue, Albany, NY 12208. In addition, if required by the OMH, the Contractor shall deliver to the OMH within forty-five (45) days of such request a copy of any or all policies of insurance not previously provided, certified by the insurance carrier as true and complete.
Certificates of Insurance shall:
a. Be in the form approved by OMH.
b. Disclose any deductible, self-insured retention, aggregate limit or any exclusion to the policy that materially changes the coverage required by this document.
c. Specify the Additional Insureds and Named Insureds as required herein.
d. Refer to this bid document by number, the Supplemental Certificate, and any other attachments on the face of the certificate,
e. When coverage is provided by a non-admitted carrier, be accompanied by a completed
ELANY Affidavit, and
f. Be signed by an authorized representative of the insurance carrier or producer.
Original, copies, faxed, and electronic documents (Certificates of Insurance, Supplemental Insurance Certificates and other attachments) will be accepted.
4) Primary Coverage: All insurance policies shall provide that the required coverage shall apply on a primary and not on an excess or contributing basis as to any other insurance that may be available to the OMH for any claim arising from the Contractor’s Work under this contract, or as a result of the Contractor’s activities. Any other insurance maintained by the OMH shall be excess of and shall not contribute with the Contractor’s insurance regardless of the ―other insurance clause contained in the Agency’s own policy of insurance.
5) Policy Renewal/Expiration: At least two (2) weeks prior to the expiration of any policy required by this contract, evidence of renewal or replacement policies of insurance with terms no less favorable to the OMH than the expiring policies shall be delivered to the OMH in the manner required for service of notice in Paragraph A.3. Certificates of Insurance/Notices above. If, at any time during the term of this contract, the coverage provisions and limits of the policies required herein do not meet the provisions and limits set forth in the Contract or proof thereof is not provided to the OMH, the Contractor shall immediately cease Work on the Project. The Contractor shall not resume Work on the Project until authorized to do so by the OMH. Any delay, time lost, or additional cost incurred as a result of the Contractor not having insurance required by the Contract or not providing proof of same in a form acceptable to the OMH, shall not give rise to a delay claim or any other claim against the OMH. Should the Contractor fail to provide or maintain any insurance required by this contract, or proof thereof is not provided to the OMH, the OMH may withhold further contract payments, treat such failure as a breach or default of the contract, and/or, after providing written
18 of 72 Revised (11/15/2024) notice to the Contractor, require the Surety, if any, to secure appropriate coverage and/or purchase insurance complying with the Contract and charge back such purchase to the Contractor.
6) Self-Insured Retention/Deductibles: Certificates of Insurance must indicate the applicable deductible/self-insured retention on each policy. For Construction contracts – General, Environmental, and/or Builders’ Risk deductibles or self-insured retentions above $100,000 are subject to approval from the OMH. Additional surety/security may be required in certain circumstances. The Contractor shall be solely responsible for all claim expenses and loss payments within the deductible or self-insured retention.
7) Subcontractors: Should the Contractor engage a Subcontractor, the Contractor shall endeavor to impose the insurance requirements of this document on the Subcontractor, as applicable.
Required insurance limits should be determined commensurate with the work of the Subcontractor.
Proof thereof shall be supplied to the OMH.
8) General Liability Commercial General Liability Insurance, (CGL) covering the liability of the Contractor for bodily injury, property damage, and personal/advertising injury arising from all work and operations under this contract. The limits under such policy shall not be less than the following:
1. Each Occurrence limit - $1,000,000
2. General Aggregate – $2,000,000
3. Products/Completed Operations - $2,000,000
4. Personal Advertising Injury – $1,000,000
5. Damage to Rented Premises - $50,000
6. Medical Expense – $5,000
Coverage shall include, but not be limited to, the following: premises liability, independent contractors, blanket contractual liability, including tort liability of another assumed in a contract, defense and/or indemnification obligations, including obligations assumed under this contract, cross liability for additional insured’s, products/completed operations for a term of no less than 3 years, commencing upon acceptance of the work, as required by the contract, explosion, collapse, and underground hazards, contractor means and methods, liability resulting from Section 240 or Section 241 of the New York State Labor Law.
The following ISO forms must be endorsed to the policy:
a. CG 00 01 01 96 or an equivalent – Commercial General Liability Coverage Form
b. CG 20 10 11 85, or, an equivalent- Additional Insured-Owner, Lessees or Contractors (Form B)
c. CG 25 03 11 85 or, an equivalent - Designated Construction Project(s) general aggregate limit (only required for construction contracts).
Limits may be provided through a combination of primary and umbrella/excess liability policies. The CGL aggregate shall be endorsed to apply on a per project basis for construction contracts.
Policies shall name NYS Office of Mental Health as Additional Insureds, and such coverage shall be extended to afford Additional Insured status to those entities during the Products/Completed Operations term.
The CGL policy, and any umbrella/excess policies used to meet the ― Each Occurrenceǁ limits specified above, must be endorsed to be primary with respects to the coverage afforded the Additional Insureds, and such polic(ies) shall be primary to, and non-contributing with, any other insurance maintained by the OMH. Any other insurance maintained by the OMH shall be excess of and shall not contribute with the Contractor’s or Subcontractor’s insurance, regardless of the other insurance clause contained in either party’s policy of insurance.
19 of 72 Revised (11/15/2024)
11. Background Checks and Requirements for Contractor providing services in OMH-operated Facilities:
A. If the CONTRACTOR is providing services described in Section 1 Scope of Work, in his or her individual capacity such that the CONTRACTOR will have regular and substantial contact with any person who is receiving services or support from OMH:
1) CONTRACTOR agrees to be screened by OMH against the Staff Exclusion List (“SEL”) and Statewide Child Abuse Registry List (“SCR”) in accordance with Social Services Law Sections 424-a and 495. In the event that SCR notifies OMH of the existence of an indicated report, CONTRACTOR agrees to provide written consent to the SCR to release to OMH any and all information SCR has regarding CONTRACTOR. CONTRACTOR shall provide such additional information as OMH, in its sole discretion, deems necessary to permit OMH to make a determination about CONTRACTOR’s suitability to provide the contract services. Any fees associated with this procedure will be paid by the OMH Facility.
2) By signing this Agreement, CONTRACTOR represents and warrants that:
i. CONTRACTOR has not previously engaged in any act in violation of any law which could compromise the health and safety of Facility patients.
ii. During the term of this Agreement, CONTRACTOR shall not engage in any act in violation of any law which could compromise the health and safety of Facility patients.
3) Prior to being permitted to provide services under this Agreement, CONTRACTOR shall execute the Justice Center Code of Conduct as required by the Protection of People with Special Needs Act. A copy of the Justice Center Code of Conduct can be found at the following link:
http://www.justicecenter.ny.gov/sites/default/files/documents/CodeOfConductForm-002.pdf
4) OMH may terminate the Agreement for cause immediately in the event that:
i. CONTRACTOR is listed on the SEL;
ii. CONTRACTOR fails to provide consent for release of information from SCR as required in subparagraph (a) above;
iii. CONTRACTOR fails to provide such additional information as OMH, in its sole discretion, deems necessary to permit OMH to make a determination about CONTRACTOR’s suitability to provider for the contract services;
iv. OMH, in its sole and absolute discretion, determines that CONTRACTOR is not suitable to provide the contract services based on information in the SCR or supplemental information provided by CONTRACTOR;
v. OMH receives reliable information that, prior or during the term of the Agreement, CONTRACTOR has engaged in an act in violation of the law which, in OMH’s sole and absolute discretion, could compromise the health and safety of Facility patients;
vi. CONTRACTOR fails to execute, or following execution, to comply with the required Justice Center Code of Conduct;
5) Prior to terminating the Agreement for cause as provided in subparagraph D(3)-(6) above, OMH shall provide CONTRACTOR with written notice and an opportunity to be heard. Contractor shall be suspended from performing services under the Agreement pending OMH’s final determination regarding termination.
20 of 72 Revised (11/15/2024)
B. If the CONTRACTOR provides the services described in Section 1 Scope of Work, via employees, agents, or subcontractors (subject individuals), wherein the subject individuals will have regular and substantial contact with any person who is receiving services or supports from OMH:
1) CONTRACTOR shall assure that the subject individuals agree to be screened by OMH against the SEL and SCR in accordance with Social Services Law Sections 424-a and 495. In the event that SCR notifies OMH of the existence of an indicated report, CONTRACTOR agrees that subject individual must provide written consent to the SCR to release to OMH any and all information SCR has regarding the subject individual. CONTRACTOR shall ensure that subject individuals provide such additional information as OMH, in its sole discretion, deems necessary to permit OMH to make a determination about subject individual’s ability to provide services to OMH patients. Any fees associated with this procedure will be paid by the OMH Facility.
2) CONTRACTOR, solely at its own expense, shall pre-screen and conduct background checks which shall consist of an investigation to determine evidence of criminal history; verification of education, professional license, certification or other credentials required. CONTRACTOR assumes responsibility for ensuring that no subject individual has previously engaged in any act in violation of any law which could compromise the health and safety of Facility patients.
3) CONTRACTOR must assure that subject individuals agree to read and sign the Justice Center Code of Conduct.
4) OMH reserves the right to bar any subject individual from performing contract services under this Agreement in the event that such individual fails to meet the requirements set forth herein.
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .