IBCT PDM Monitoring System Upgrade Mock Up SOW_updated.doc

SCOPE OF WORK

IBCT PDM IF Monitoring System Upgrade Mock UP

SECTION 1 – GENERAL INFORMATION

1.1 Scope of Work

KTR shall provide services related providing technical and engineering support in mocking up and testing upgraded DES and Solid-State Monitoring System for the Isotta Frashchini V1312-MLH-KC Main Diesel Engines used by the WLR/WLIC Fleet

1.1.2 Place of Performance:

1.1.2.1 Unit

IBCT PDM APM1

Fincantairi Marine Systems North America

800 Principal Court

Chesapeake, VA

23320

1.1.3 Contracting Officer (KO):

1.1.3.1 Name:

Unit: IBCT PDM APM-1

PH:

FX: N/A

E-mail:

1.1.4 Contracting Officers’ Technical Representative:

1.1.4.1 Name: Ensign Chase Randell

Unit: SFLC-IBCT-PDM-APM1

PH: 571-613-4750

FX: N/A

1.1.5 Contact for questions:

1.1.5.1 Any questions regarding scope of work must be directed to the Contracting Officer.

1.2 Contractor Personnel

1.2.1 Contract Manager

The contractor must provide a contract manager who must be responsible for the performance of the work. The name of this person, and an alternate or alternates, who must act for the contractor when the manager is absent, must be designated in writing to the contracting officer.

1.2.1.1 The contract manager or alternate must have full authority to act for the contractor on all contract matters relating to daily operation of this contract

1.2.1.2 The contact manager and alternate or alternates must be able to read, write, speak, and understand the English language.

1.2.2 Contractor employees

The contractor must not employ persons for work on this contract if such employee is considered by the contracting officer to be a POC.

1.2.2.1 Contractor personnel must present a neat appearance and be easily recognized as contractor employees.

1.2.2.2 The contractor must not employ any person who is an employee of the U. S. Government if employing that person would create a conflict of interest. Additionally, the contractor must not employ any person who is an employee of the U. S. Coast Guard unless such person seeks and receives approval according to U. S. Coast Guard regulations.

1.2.2.3 The contractor shall hold valid license, certifications, and/ or permits to perform work at place of performance.

1.2.3 Security requirements

None

1.3 Hours of Operation

1.3.1 The contractor must perform the tasks as required by the SOW under this contract during the following hours: Monday through Friday between 8:00am and 4:00pm unless other time is specified.

132.1 Period of performance: March 20, 2026 – June 30, 2026

1.4 Award

It is the governments’ intent to make award as Sole Source

1.4.1. Under FAR 4.1103 prospective contractor shall be registered in System Award Management (SAM) prior to award. Failure for contractor to be registered in (SAM) shall result in Contracting Officer to proceed with next successful registered offeror. Website: www.sam.gov

1.5 Invoicing

Invoices shall be sent to address as per the contract. To ensure proper payment, all invoices shall have requisition number/order number, company name and address, UEI number, invoice number and date clearly indicated on your invoice. It is recommended that the offeror attach a copy of the Purchase Order / Contract to their invoice(s).

1.5.1 Invoices shall be submitted for payment following the invoicing instructions on the Purchase Order.

SECTION 2 – DEFINITIONS

2.1 General Definitions

When the (SOW), solicitation provision or contract clause uses a word or term that is defined in the Federal Acquisition Regulations (FAR), the word or term has the same meaning as the definition as contained in section 2.101 of the FAR. The FAR index is available via the Internet at http://www.acqnet.gov at the end of the FAR, after the FAR Appendix.

2.1.1 Defective Service: A service or commodity output that does not meet the standard of performance requirement specified in the contract for that service or commodity.

2.1.2 Quality Assurance: A planned and systematic pattern of all government actions necessary to provide confidence that adequate technical requirements are established; products and services conform to established technical requirements; and satisfactory performance is achieved. Quality assurance refers to actions by the government assurance functions for a contracted service.

2.1.2 Quality Control: Those actions taken by a contractor to control the production of outputs to ensure that they conform to the contract requirements.

2.1.3 Technical Definitions: None

2.1.4 References: NONE

2.1.5 Government Furnished Equipment: NONE

2.1.6 Government Furnished Facilities: NONE

SECTION 3 – REQUIREMENTS

3.1 General

3.1.1 CIR.

None.

3.1.2 Tech Rep. The Contractor must provide the services of a certified mechanic, who is familiar with Isotta Frashchini V1312-MLH-KC Main Diesel Engine and control system.

3.1.3 Protective measures. None

3.1.4 Interferences. None

3.3 Work plan. The Contractor shall provide technical, engineering, and management support to mock up and test upgraded DES and Solid State Monitoring System to Coast Guard personnel.

· Supply (1) 15” Solid State unit

· Supply (1) DES unit

· Connect Monitoring system to engine

· Line up fuel system

· Line up cooling system

· Start and operate engine

· Test Solid State monitoring system

SECTION 4 – CONTRACTOR FURNISHED ITEMS AND SERVICES

NONE

SECTION 5 – NOTES

5.1 IBCT PDM APM1 POC is Robert Holt, Robert.h.holt2@uscg.mil, 810-542-1041