Intercom Requirements for TV Marti Broadcast Operations.pdf

Requirements for Intercom System for TV Marti Broadcast Operations Version 1, 8/12/2011

All items listed below must be the cited ClearCom Product Model/Part Number, or Equivalent.

The following three items must be able to connect directly with a ClearCom Eclipse-PiCo Digital Matrix Intercom System via CAT5 wire and possess the following salient characteristics:

• 10 character display for ease of caller ID recognition

• International character fonts

• Digital Signal Processing (DSP) for audio routing and effects

• Supervisor functionality for centralized control

• Individual up/down cross point level control for personal mixes

• “Listen Again” - replays last 30 seconds of incoming call

Qty Item 1 ClearCom V24LDX4 or equivalent. This intercom user panel will be a 24 Lever Key

Display Panel with XLR-4 Male headset connector. The panel will have 24 keys including one reply/answer-back key and 8 shift pages. Each key will have individual up/down crosspoint level buttons. The panel menu will provide user set-ups and assignment options. Each panel can be supervised or supervise another. The rear panel will have Audio I/O and GPI/O connections.

1 ClearCom V24PDX4 or equivalent. This intercom user panel will be a 24 Pushbutton Key

Display Panel with XLR-4 Male headset connector. The panel will have 24 pushbutton keys including one reply/answer-back key and 8 shift pages. Each key will have individual up/down crosspoint level buttons. The panel menu will provide user set-ups and assignment options. Each panel can be supervised or supervise another. The rear panel will have Audio I/O and GPI/O connections.

8 ClearCom V12LDX4 or equivalent. This intercom user panel will be a 12 Lever Key

Display Panel with XLR-4 Male headset connector. The panel will have 12 keys including one reply/answer-back key and 8 shift pages. Each key will have individual up/down crosspoint level buttons. The panel menu will provide user set-ups and assignment options. Each panel can be supervised or supervise another. The rear panel will have Audio I/O and GPI/O connections.

The following five items listed below must be ClearCom Products or Equivalent. They must be able to interface directly with a ClearCom Eclipse-PiCo Digital Matrix Intercom System.

Qty Item 1 ClearCom IFB-104 or equivalent. It must be a 1RU 4-Port XLR-3 IFB Intercom/Audio Cue break out matrix interface. Each IFB output and prog audio / Cue audio must use XLR-3 I/O and must be transformer balanced. Connections to the matrix will use RJ-45.

It will directly connect up to four IFB feeds to the ports of a digital matrix system.

Individual or multiple IFB ear buds or headphones may be used directly from each connected matrix port. It will not require external power to drive its circuitry. Each channel will possess a rear-mounted wet/dry switch, allowing either direct connection or powering via a party-line intercom power supply. The signal from the matrix port will be transformer-coupled to the XLR connector output.

1 ClearCom IMF-3 or equivalent. It must be able to hold up to 11 interface modules in a

3RU chassis. Modular rear-mounted connector units feature two RJ-45 connectors to the matrix ports and two DB-9s attaching the connected devices. The frame will be used in conjunction with the PSU-101 rack-mountable dual power supply, providing power to the enclosed interfaces.

1 ClearCom PSU-101 or equivalent. This power supply for the IMF-3 interface frame will have both an audible failure alarm and failure relay contacts to activate a remote signal. It will power a minimum of two interface frames.

2 ClearCom TEL-14 or equivalent. It must be a two-line, auto-nulling digital hybrid telephone interface module, designed for establishing IFB connections between the main intercom and remote production trucks, and enabling telephone calls directly from any intercom station in an Eclipse matrix.

1 ClearCom CCI-22 or equivalent. This unit will connect two 2-wire full duplex party-line circuits with the matrix. The interface will support Clear-Com signaling to and from the matrix system, deriving its power from the external party-line circuit. Levels and cable nulling are completely adjustable. This unit will function with Clear-Com and other two-wire intercom systems.

The following five items listed below must be ClearCom Products or Equivalent.

Qty Item 3 ClearCom CC-95 or equivalent. This 4 pin female XLR headset must have a single-ear enclosed headset that offers the same full range audio response, acoustic isolation, comfort and durability as the ClearCom CC-260. It must have a 270 degrees boom rotation microphone, offering the user the option of left or right ear operation.

3 ClearCom CC-260 or equivalent. This 4 pin female XLR headset must have a double ear enclosed headset that must offer an enclosed ear design with leatherette cushion to reduce background noise and provide excellent acoustic isolation. The boom microphone must be equipped with a noise-canceling mic element and 270 degree rotation for left or right side use.

5 ClearCom CC26K-X4 or equivalent. This 4 pin female XLR headset must be a single open ear, lightweight headset with an over-the-head design. It must have a flexible neck boom and dynamic noise-canceling microphone to help improve voice clarity.

3 ClearCom 110/100 or equivalent. Gooseneck condenser microphone supplied with a threaded 3 pin male DIN connector and windscreen, 10cm/3.9” in length.

2 ClearCom 110/490 or equivalent. Gooseneck condenser microphone supplied with a threaded 3 pin male DIN connector and windscreen, 49cm/19.3” in length.