I.P-2. JML 61882605 - Additional Requirements.pdf

This document is an excerpt from a federal contract specification for a casting sleeve component, establishing additional requirements and manufacturing standards.

The specification references two drawing numbers (6225709 and 4457003) associated with CAGE 53711 and includes a comprehensive list of document references and standards that govern production. Key standards include ANSI/ASQ Z1.4 for sampling inspection, ANSI/NCSL Z540.3 and ASTM-B16 for dimensional requirements, ASTM-B369 for material performance, ISO 9001/9002 for quality management, and MIL standards for radiography and welding procedures. Production radiography must comply with T9074-AS-GIB-010/271 for acceptance criteria at critically level I per applicable tables. All radiographed pieces require permanent "RT" marking with unique serial numbers traceable to the radiography film. Production radiography requires final Navy acceptance and submission of film, radiographic shooting sketches or standard shooting sketches, reader sheets (RS), and DD250 forms with traceable serial numbers alongside the hardware. Testing requirements include ASTM-B369 weldability testing of ASTM-B369 material for AFT SLEEVE PC 43 and visual inspection of the casting sleeve per T9074-AS-GIB-010/271 acceptance standards (Category 2, Subcategory G). If welding or brazing is performed, all personnel and procedures must be qualified under S9074-AQ-GIB-010/248 or 0900-LP-001-7000, with control of filler metals maintained to point of consumption and responsibility for subcontractor compliance assigned to the prime contractor.