I.G. Minimum Requirements.pdf
PDF 192 KB Posted
- Attached to
- Amendment 001 - Padova Technologies Trainer System Federal contract opportunity
- Solicitation number
- N6660424Q0136
About this file
This document outlines the minimum requirements for a federal government IT hardware procurement. The procurement is for one Ultra 1U server with specified processors, memory, graphics card, storage, networking capabilities, and warranty terms. The related federal contract opportunity is a solicitation from the Department of the Navy Naval Sea Systems Command for NVIDIA graphic cards. Additional details provided in the server minimum requirements include configuration notes on component placement and labeling, as well as requirements for factory acceptance testing and integration services. Pricing and response date information was not included.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Combined Synopsis - 001.pdf | ||
| II.G. Combined Synopsis - Amendment 002.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Minimum Requirements / Consisting of:
1x Ultra 1U, 10x2.5" 2x25GbE, X11DPU, 119UAC2-R751-T 2x CLX 4216 2P 16C/32T 2.1G 22M 9.6GT 100W 3647 L1 12x 32GB DDR4-3200 2Rx4 LP ECC RDIMM,HF,RoHS 1x NVIDIA PNY Quadro T1000 8GB GDDR6 PCIe 3.0-Active Coolin 8x 40x40x56 mm, 23.3K-20.3K RPM, Counter-rotating Fan, RoHS/REA 1x 29cm 30AWG SATA S-RA Cable 1x 1U Ultra RHS Riser Card with 1 PCIE/SATA Hybrid M.2 &1 PCIE 1x Out of Band Firmware Management License-BIOS Flash /Setting 1x Assembly & Integration 1x 3 YRS LABOR, 3 YRS PARTS, 1 YR CRS UNDER LIMITED WRNTY 1x TERA 2220 DUAL DISPLAY RJ45 HOST CARD 1x Specific Configuration Notes Provided:
PCoIP Host cards shall be delivered with two DP to Mini DP dongles.
Do not cable power connector to the PCoIP card.
PCoIP Host cards shall be delivered with two DP to Mini DP dongles.
Do not cable power connector to the PCoIP card.
Looking at the rear of the machine the PCI slot configuration should be as follows:
Slot1: Internal Slot2: Half height top left Slot3: Full height on top right Slot4: Full height on bottom right PCoIP card installed in PCI slot 2.
Server P/N's should conform to STxx scheme and be clearly visible while installed in a rack with others servers above or below. All documentation and extra accessories (brackets, cables, etc.) need to be delivered with the server. Factory Acceptance Test needs to be performed to verify functionality of equipment.
1x Integration, Engineering Verification and Burn-in 1x Padova 3 Yrs Labor, 3 Yrs Parts, 1 Yr CRS Under Limited Wrnty 1x 3 Year Warranty Parts & Labor
File details come from the government source that posted it. Updated .