I.A.2. Statement of Work Rev. 05 ASK CLEAN.docx

STATEMENT OF WORK (SOW)

Cables Assemblies: Copper, Fiber, and Hybrid

1.0 Background

The Fleet Sensors & Cables Engineering Branch (Code 1535) of the Sensors and Arrays Division (Code 153) of the Naval Undersea Warfare Center Division Newport serves as the Navy's Technical Design Agent (TDA) and In-Service Engineering Agent (ISEA), and assists with Acquisition Engineering Agent (AEA) activities for surface ship and submarine transducers, hydrophones and cables. Code 1535 maintains the Navy's outboard SONAR cable inventory in large part through contract vehicles established to procure the cables which are delivered to the stock system and are available to support new construction and fleet needs.

1.1 Places of Performance

All work performed under this contract will be performed at the contractor’s facility.

1.2 Authorized Users

Sensor and SONAR Systems Department, Code 15 or the Naval Undersea Warfare Center, Division Newport, RI is the only authorized user of this contract.

1.3 Sponsors

· PMS 401 Submarine Acoustic Systems

· PMS 450 Virginia Class Program Office

· PMS 397 Columbia Class Program Office

· Type Commanders

· Naval Shipyards

1.4 Types of Funding

· Operation & Maintenance, Navy (O&MN)

· Other Procurement, Navy (OPN)

· Shipbuilding and Conversion, Navy (SCN)

· National Sea-Based Deterrence Fund (NSBDF)

· Service Cost Center (SCC)

2.0 Scope

This SOW reflects a build-to-print approach. The contractor shall manufacture, inspect, test, package, and deliver production build-to-print items in accordance with their respective drawings and applicable documents as detailed below.

3.0 Applicable Documents (ADs)

The contractor shall perform the tasking required in Section 4.0 in accordance with the below Applicable Documents.

AM-PRO-020/MLDG

REV 2

UNDERWATER CABLE ASSEMBLY AND

ENCAPSULATED COMPONENTS,

FABRICATION, REPAIR, AND INSTALLATION

MANUAL

4.1.1

AM-PRO-030/MLDG

REV 03

UNDERWATER CABLE ASSEMBLY AND

ENCAPSULATED COMPONENTS,

FABRICATION, REPAIR, AND INSTALLATION

MANUAL, VOLUME III PLASMA SPRAY

PROCEDURE

4.1.1

Table 1. Cable Assemblies

4.0 Technical Requirements

The contractor shall manufacture, inspect, test, package, handle and deliver Cable Assemblies in accordance with ADs 3.1 – 3.3.

4.1. Production Hardware

4.1.1 The contractor shall manufacture, inspect, test, package, handle and deliver production units in accordance with ADs 3.1-3.3.

5.0 Exception from Information and Communication Technology Accessibility Requirements The Government has determined that this procurement is not Information and Communication Technology (ICT) or exempt from Accessibility Standards (36 C.F.R. Part 1194, Appendix A).