HVAC_Maintenance_and_Repair_Service.pdf

PDF 637 KB Posted

Attached to
OPEN HVAC Maintenance and Repair Service
Solicitation number
27-17
Issued by
Bell County, La Casita CDP, Texas

About this file

This is a Request for Proposal (RFP 27-17) issued by the City of Killeen, Texas, for comprehensive HVAC maintenance and repair services. The City seeks qualified contractors to provide services for HVAC equipment in two categories: equipment below 7.5 tons and equipment 7.5 tons and above. Proposers may submit proposals for either or both categories, with the City reserving the right to award categories separately and select different contractors for each category. Services include routine preventive maintenance, inspections, repairs, emergency and after-hours support, refrigerant handling, controls and electrical component repair, and equipment replacement or installation when authorized. The RFP was released on October 26, 2026, with a deadline for questions on November 4, 2026, and a proposal response deadline of November 12, 2026, at 3:00 PM. Responses must be submitted electronically through the City's procurement portal. The resulting contract will be effective for one year from the date of final signature, with automatic renewal for up to four additional one-year terms unless either party provides 60 days' written notice of non-renewal. The City may extend the contract up to an additional 60 days to facilitate procurement of replacement services without pricing adjustments. The contract shall not exceed four years total or $100,000 or more without prior City Council approval.

Pricing must be clearly itemized and comprehensive, including regular, after-hours, weekend, holiday, and emergency labor rates; parts and materials markup; service call and diagnostic charges; travel and delivery fees; and equipment replacement and installation pricing if applicable. Contractors must identify any available volume discounts or multi-location discounts. A price escalation clause permits the successful contractor to request pricing increases no later than 90 days before the end of each contract year, with any approved increase capped at 10 percent of the current contract price and requiring demonstration of cost increases. A tariff clause allows for equitable adjustment if governmental tariffs, duties, or taxes directly affect service costs, subject to a maximum 10 percent adjustment of the original contract price. Contractors may also reduce pricing if they offer more favorable rates to other Texas municipalities for similar services. All proposers must maintain comprehensive general liability insurance with minimum limits of $1,000,000 per occurrence and $2,000,000 aggregate, automobile liability insurance with minimum limits of $500,000 per person and $1,000,000 per accident, and workers' compensation insurance as required by Texas law. The City must be named as an additional insured on general and automobile liability policies. Proposals will be evaluated using a weighted best-value methodology across six criteria: Pricing and Payment Terms (20 percent), Service and Technical Support (25 percent), Customer Service and Account Management (10 percent), Licensing and Certification (10 percent), Service and Job Requirements (25 percent), and Subcontractor Information and Additional Considerations (10 percent). The City reserves the right to conduct optional Phase 2 interviews or presentations scored up to 100 additional points. No guaranteed minimum quantities or dollar amounts are promised, as services will be requested as needed subject to available funding and City approvals.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

REQUEST FOR PROPOSAL

27-17

HVAC MAINTENANCE AND REPAIR SERVICE

City of Killeen

802 N 2nd St

Killeen, TX 76541

RELEASE DATE: October 26, 2026

DEADLINE FOR QUESTIONS: November 4, 2026

RESPONSE DEADLINE: November 12, 2026, 3:00 pm

RESPONSES MUST BE SUBMITTED ELECTRONICALLY TO:

https://procurement.opengov.com/portal/killeentexas https://procurement.opengov.com/portal/killeentexas

City of Killeen

REQUEST FOR PROPOSAL

HVAC Maintenance and Repair Service

I. Scope of Work II. Proposal Criteria & Requirements

III. Evaluation Methodology IV. Vendor Questionnaire V. Reservation of Rights

Attachments:

A - Potential HVAC Locations

Request For Proposal #27-17 Title: HVAC Maintenance and Repair Service

1. Scope of Work

Contractor Categories: The City intends to obtain services for both HVAC equipment below 7.5 tons and

HVAC equipment 7.5 tons and above. Proposers may submit a proposal for either category or both categories, based on their qualifications, licensing, experience, and service capabilities. The City reserves the right to award the categories separately and to select different contractors for each category. A proposer is not required to provide services for both categories to be considered for award. The City may add, remove, replace, relocate, or modify facilities, buildings, locations, equipment, and quantities during the Contract term based on operational needs and the terms of the resulting Contract.

1.1. General Requirements

The proposer must demonstrate the ability to meet or exceed the following specifications:

• HVAC Maintenance and Repair Services: Provide comprehensive HVAC maintenance, inspection, troubleshooting, repair, and related services for City of Killeen facilities as requested by the City. Aviation HVAC equipment is included in this RFP for informational and potential future contracting purposes.

• Repair Services: Diagnose and repair HVAC equipment and related components, including air conditioning, heating, ventilation, controls, electrical components, refrigerant systems, and associated equipment.

• Emergency Services: Provide emergency and after-hours HVAC service when requested by the

City. Proposers shall identify their available emergency response and service capabilities.

• After-Hours Availability: Provide after-hours, weekend, and holiday HVAC services when requested by the City. The contractor shall maintain a designated method for receiving and responding to emergency and after-hours service requests.

• Response Time: Respond to service requests within the timeframes established by the resulting contract. Proposers shall identify anticipated response times for routine, urgent, and emergency service requests. Routine and scheduled work shall be coordinated with the City's designated representative and performed within a reasonable and mutually agreed-upon timeframe that considers the City's operational needs, facility availability, and the nature of the work.

• Labor, Supplies, Parts, and Materials: Provide all necessary labor, tools, equipment, parts, materials, refrigerants, supplies, and other resources required to properly perform the requested services unless otherwise specified by the City.

• Existing and New Equipment: Services may include HVAC equipment currently installed at City facilities as well as equipment installed, replaced, upgraded, modified, or placed into service during the term of the resulting contract. Equipment currently covered by a separate maintenance, service, or warranty agreement may be considered for addition to the resulting contract upon expiration or conclusion of the applicable agreement. The City may add, remove, replace, relocate, or modify equipment and facilities during the Contract term based on operational needs, existing contractual obligations, warranties, funding, or other applicable circumstances.

• Equipment and Location Lists: The City will provide available HVAC equipment and facility information to the awarded contractor(s). The attached Potential HVAC Service Locations and

Equipment list identifies anticipated facilities, locations, approximate square footage, and available HVAC equipment information, including approximate equipment sizes where available.

The information provided is for informational and planning purposes only and is not guaranteed to represent the equipment, facilities, locations, quantities, or services that will be included in the resulting Contract. Equipment, facilities, locations, buildings, and quantities may change during the Contract term. The City may add, remove, replace, relocate, or modify equipment, facilities, buildings, locations, and quantities as operational needs change.

• Warranty Coordination: Identify equipment covered by manufacturer or other applicable warranties and coordinate warranty-related service with the City as required. The contractor shall not perform chargeable warranty-covered work without authorization from the City.

• Cost Transparency: Provide detailed pricing, service recommendations, repair estimates, and comments regarding alternatives or other information necessary for the City to make informed decisions regarding requested work.

• Work Authorization: No repair, replacement, or other work outside authorized maintenance services shall be performed without approval from the City's designated representative.

• Communication: Maintain clear and consistent communication with the City's designated representative regarding service requests, findings, recommended repairs, anticipated completion dates, parts availability, and any conditions affecting the work.

• Documentation: Provide service documentation identifying the facility, equipment serviced, date of service, work performed, deficiencies identified, parts and materials used, and recommendations for additional work, as applicable.

• Billing: Provide detailed invoices identifying the facility, equipment, date of service, labor, materials, parts, and other applicable charges. Billing procedures and required documentation will be established with the awarded contractor(s).

• Unspecified Quantities: Acknowledge that the City cannot guarantee a specific quantity or dollar amount of services. Services will be requested as needed and will be subject to available funding and applicable City approvals.

NOTE*: The services identified in this Scope of Work represent examples of the HVAC services that may be required; however, the scope is not limited to the items specifically listed. The contractor(s) shall provide all services reasonably necessary to properly maintain, diagnose, repair, and support the City's

HVAC systems and equipment in accordance with applicable industry standards, manufacturer specifications, and the requirements of the resulting contract.*

1.2. Product and Service Specifications

The proposer must demonstrate the ability to meet or exceed the following specifications:

• HVAC Equipment – Below 7.5 Tons: Provide maintenance, inspection, troubleshooting, repair, and related services for HVAC equipment with a capacity below 7.5 tons.

• HVAC Equipment – 7.5 Tons and Above: Provide maintenance, inspection, troubleshooting, repair, and related services for HVAC equipment with a capacity of 7.5 tons and above, including, but not limited to, chillers, VRF systems, geothermal systems, and other larger commercial HVAC systems and associated components.

• Heating and Cooling Systems: Service and repair heating and cooling equipment and associated components, including but not limited to rooftop units, split systems, package units, heat pumps, air handlers, condensers, compressors, boilers, heating systems, thermostats, controls, and related equipment. Such equipment may be located Citywide and / or Aviation facilities.

• Refrigeration and Refrigerant Services: Inspect, test, recover, replace, and charge refrigerants as required and in accordance with applicable Federal, State, and local requirements.

• Refrigerant Compliance: Handle, recover, store, transport, and dispose of refrigerants in accordance with applicable Federal, State, and local requirements.

• Controls and Electrical Components: Diagnose and repair HVAC controls, thermostats, motors, electrical components, sensors, and other related systems necessary for proper HVAC operation.

• Replacement Parts and Equipment: Recommend replacement of failed, damaged, obsolete, or inefficient components when repair is not practical. Services may also include the removal and replacement of existing HVAC equipment or the installation of new HVAC equipment when authorized by the City. Replacement or new equipment may include complete systems, units, components, controls, or associated equipment. Replacement work shall require City authorization.

• Emergency and After-Hours Service: Maintain the capability to provide emergency and after-hours service when requested by the City and clearly identify the proposed emergency service process and response capabilities.

• Emergency Response: Provide emergency response in accordance with the response times established in the resulting contract. The contractor shall communicate the status of emergency service requests, including anticipated arrival time, required parts or materials, temporary measures, and estimated completion time when reasonably available.

• Service Calls: Respond to service calls, diagnose the reported issue, identify the cause of failure when reasonably determinable, and provide recommendations for repair or corrective action.

• Temporary Measures: When an immediate permanent repair cannot be completed, provide recommendations for reasonable temporary measures, when available, to restore or maintain facility operations until permanent repairs can be completed.

• Equipment Startup and Testing: Perform startup, operational testing, adjustments, and verification following repairs, replacement of components, or other applicable HVAC work.

• Manufacturer Specifications: Perform all work in accordance with applicable manufacturer specifications and recommendations unless otherwise approved by the City.

• Workmanship: Perform all services in a professional and workmanlike manner using qualified personnel and appropriate tools and equipment.

• Job Sites: Maintain work areas in a safe, neat, and orderly condition and remove debris, replaced parts, and other materials generated by the contractor's work unless otherwise directed by the City.

• Safety: Follow all applicable safety requirements and take appropriate precautions to protect

City employees, building occupants, facilities, equipment, and the public.

• Licensing and Certifications: Maintain all licenses, certifications, registrations, and qualifications required by Federal, State, and local laws for the services being performed.

• Technician Qualifications: Ensure that personnel performing HVAC services are properly trained, qualified, licensed, registered, or certified as required for the services being performed.

• Records and Reports: Maintain accurate records of inspections, maintenance, service calls, repairs, parts, refrigerant usage, equipment condition, and other applicable service activities and provide such documentation to the City upon request.

• Sub-Contractors: All subcontractors, third-party contractors, specialty contractors, and other personnel used to perform services under the resulting contract shall meet the same applicable requirements, qualifications, licensing, safety, and insurance requirements as the primary contractor.

The City reserves the right to modify the scope of work during contract negotiations to align with funding, phasing, or other programmatic needs.

1.3. Citywide Facilities

HVAC maintenance and repair services for Citywide facilities will be coordinated through Facility

Maintenance. Services may include routine preventive maintenance, inspections, repairs, emergency services, and other authorized HVAC-related services for City facilities.

The City may add, remove, replace, relocate, or modify facilities, buildings, equipment, locations and quantities during the Contract term based on operational needs and the expiration of existing maintenance agreements, warranties, or other service arrangements, subject to the terms of the resulting

Contract. The City may also increase or decrease the amount or type of HVAC equipment requiring services. Facility Maintenance will coordinate HVAC service requests, work orders, scheduling, and related service requirements for Citywide facilities.

1.4. Aviation Facilities

The RFP includes HVAC equipment located at City Aviation facilities for informational and potential future contracting purposes. Aviation is currently under a separate HVAC maintenance agreement that is expected to expire on March 1, 2028, unless the agreement expires or terminates earlier.

The City reserves the right, but is not obligated, to include Aviation HVAC equipment and services in one or more contracts resulting from this solicitation upon expiration or earlier termination of the existing

Aviation HVAC maintenance agreement. The City may elect to add all, some, or none of the Aviation equipment or services to a resulting contract and is not obligated to amend the resulting contract to include Aviation equipment or services.

Aviation will continue to manage its own HVAC maintenance, service requests, work orders, scheduling, and coordination for Aviation facilities. Inclusion of Aviation equipment and specifications in this solicitation does not transfer responsibility for Aviation HVAC maintenance or work-order management to Facility Maintenance.

If Aviation equipment or services are added to a resulting Contract, the City may add, remove, replace, relocate, or modify Aviation facilities, equipment, locations, and quantities based on operational needs and the terms of the resulting Contract.

1.5. Additional Equipment and Services

The City may add, remove, replace, relocate, or modify existing HVAC equipment, new HVAC equipment, replacement equipment, upgraded or modified equipment, facilities, buildings, locations, and services during the Contract term, subject to the terms of the resulting Contract.

Equipment that is currently covered by a separate maintenance, service, or other contractual agreement may be considered for addition to a resulting Contract upon expiration, termination, or other conclusion of the existing agreement. The City is not required to add such equipment to a resulting Contract.

Equipment that is currently covered by a manufacturer, installer, or other applicable warranty may also be considered for addition to a resulting Contract upon expiration of the applicable warranty or when warranty coverage no longer applies.

The City may add newly installed, replacement, upgraded, or modified equipment during the Contract term. Such equipment may include complete HVAC systems, units, boilers, controls, components, or other related equipment. Any added equipment shall be serviced in accordance with the applicable equipment category, the Contractor's awarded service capabilities, manufacturer requirements, and the terms of the

Contract.

The City may increase or decrease the quantity of equipment, facilities, buildings, locations, or services during the Contract term. The City may also remove equipment or locations from the resulting Contract when they are no longer required, are replaced, relocated, taken out of service, or are otherwise no longer applicable.

The City may use one Contractor or multiple Contractors and may determine whether and when equipment or services are added based on the applicable equipment category, service requirements, facility location, qualifications, licensing, availability, existing contractual obligations, and awarded pricing.

Additional HVAC-related services may be requested by the City when authorized. Routine and scheduled services shall be coordinated with the City's designated representative and performed within a reasonable and mutually agreed-upon timeframe based on the City's operational needs, facility availability, and the nature of the work.

Nothing in this section guarantees that any particular equipment , facility, building, location, quantity, or service will be added to or remain under a resulting Contract.

2. Proposal Criteria & Requirements

All pricing and payment must be clearly defined and aligned with the criteria outlined in this RFP.

Proposers are required to provide all requested information, including detailed explanations of how they will meet or exceed the components as outlined.

Vendors interested in providing services for the City of Killeen must submit a complete proposal addressing each of the following requirements. Proposers shall provide sufficient detail to demonstrate their qualifications, experience, service capabilities, pricing, and ability to meet the City's requirements.

2.1. Company Profile

• Company Overview: Provide the number of years in business, areas of expertise, company size, organizational structure, and a general description of the firm's HVAC maintenance and repair capabilities.

• Relevant Experience: Describe the firm's experience providing commercial HVAC maintenance and repair services for municipal, governmental, commercial, or similarly sized facilities. Include the types and sizes of HVAC systems routinely serviced.

• Key Personnel: Identify key personnel who will be involved in this contract, including their roles, responsibilities, professional experience, and relevant qualifications.

• Service Area and Availability: Identify the geographic area regularly serviced by the Proposer and the Proposer's ability to provide services at multiple City facilities. Proposers shall also identify their ability to service HVAC equipment that may be added, replaced, upgraded, modified, or otherwise placed into service during the Contract term. Aviation facilities are included in this RFP for informational and potential future contracting purposes as described in RFP.

• References: Provide a minimum of three (3) references for similar HVAC maintenance and repair contracts performed within the past five (5) years. Include the client name, contact name, telephone number, email address, contract term, and a brief description of services provided.

2.2. Pricing and Payment Terms

Vendors must provide a comprehensive pricing structure that includes, at a minimum:

• Equipment/Service Rates: Proposers shall provide pricing for the HVAC equipment category or categories for which they are proposing to provide services. Pricing shall be clearly identified for

HVAC Equipment – Below 7.5 Tons and/or HVAC Equipment – 7.5 Tons and Above. Proposers may submit pricing for one category or both categories. The City may evaluate and award each category separately and may select different Contractors for each category.

• Labor Rates: Provide regular, after-hours, weekend, holiday, and emergency labor rates, as applicable.

• Service Rates: Provide applicable rates for service categories identified in the Bid Form/Price

Schedule, including services for HVAC equipment below 7.5 tons and equipment 7.5 tons and above.

• Parts and Materials Markup: Identify the proposed markup applied to parts, materials, refrigerants, and other items furnished as part of the services. Proposers shall clearly identify whether parts and materials will be billed at cost, cost plus a markup, or another pricing method.

• Diagnostic/Service Call Charges: Identify any applicable service call, diagnostic, trip, dispatch, or other charges.

• Emergency Service Pricing: Clearly identify any additional charges or premiums applicable to emergency or after-hours services.

• Travel, Freight, and Delivery Charges: Identify any applicable travel, freight, delivery, mobilization, or other charges that may be incurred in providing services. Any such charges shall be clearly identified in the proposal.

• Equipment Replacement and Installation Pricing: If applicable, identify the proposed pricing methodology for new, replacement, upgraded, or modified HVAC equipment, including removal of existing equipment, installation, startup, testing, labor, materials, equipment, and other associated costs.

• Discounts: Identify any available discounts based on volume, annual service commitments, multiple locations, or other circumstances.

• Payment Terms: Outline payment terms and any applicable conditions.

All pricing should be inclusive of all associated costs, including labor, materials, equipment, insurance, taxes, overhead, profit, travel, and other costs necessary to perform the services, unless specifically identified otherwise in the proposal.

Any costs, fees, surcharges, markups, or other charges not specifically identified in the proposed pricing structure may not be added to an invoice without prior authorization from the City.

2.3. Service and Technical Support

• Preventive Maintenance Program: Describe the Proposer's approach to routine and preventive

HVAC maintenance, including inspections, cleaning, adjustments, testing, identification of deficiencies, and recommendations for corrective action.

• HVAC Repair Services: Describe the Proposer's approach to diagnosing and repairing HVAC equipment, including air conditioning, heating, ventilation, controls, electrical components, refrigerant systems, and associated equipment.

• Equipment Capabilities: Identify the types and sizes of HVAC equipment the Proposer is qualified and equipped to service, including equipment below 7.5 tons and equipment 7.5 tons and above.

Identify experience and capabilities related to heating equipment, including boilers, as applicable.

• After-Hours and Emergency Support: Describe availability for after-hours, weekend, holiday, and emergency service calls. Clearly identify emergency response times and any applicable limitations or additional charges.

• Response Times: Provide proposed response times for routine, urgent, and emergency service requests.

• Parts and Materials: Describe the Proposer's ability to obtain commonly required parts, materials, replacement equipment, and other items necessary to perform services and identify any circumstances that may affect repair or replacement timelines.

• Warranty Support: Describe the Proposer's ability to identify and coordinate manufacturer warranty work and explain how warranty-related repairs will be handled. Describe the Proposer's ability to incorporate equipment into its service program when applicable maintenance, service, or warranty agreements expire or conclude.

• Quality Control Program: Demonstrate adherence to applicable regulatory and industry standards and describe inspection, supervision, and follow-up procedures used to maintain quality workmanship.

• Service Documentation: Describe the documentation and reporting that will be provided following inspections, preventive maintenance, service calls, and repairs. Documentation should identify, as applicable, equipment condition, work performed, parts and materials used, refrigerant usage, deficiencies identified, and recommendations for additional work.

• Safety Program: Describe the firm's safety program and procedures for protecting City employees, building occupants, property, and the public while performing work.

• Backup and Continuity of Services: Provide details regarding staffing, backup personnel, equipment, and other resources available to maintain service in the event of unforeseen disruptions or changes in the number or type of facilities or equipment requiring services.

2.4. Customer Service and Account Management

• Support Channels: Offer customer support through designated channels, including but not limited to phone and email.

• Designated Representative: Assign a designated representative responsible for coordinating services, scheduling, communication, and quality control.

• Account Manager: Appoint an account manager who will serve as the primary point of contact for the City's contract administration and service coordination.

• Service Requests: Describe the process for receiving, assigning, tracking, and closing City service requests.

• Communication: Describe how the City will be notified regarding service status, delays, equipment conditions, recommended repairs, parts availability, and expected completion dates.

• Escalation Process: Describe the process for escalating unresolved service issues, emergency conditions, or recurring equipment problems.

2.5. Service Timeline and Response Requirements

• Routine Service: Identify anticipated scheduling and response times for routine maintenance and non-emergency service requests. Describe the Proposer's ability to coordinate routine and scheduled work with the City's designated representative and perform such work within a reasonable and mutually agreed-upon timeframe based on the City's operational needs, facility availability, and the nature of the work.

• Urgent Service: Identify response times for service requests that affect building operations but do not constitute an emergency.

• Emergency Service: Identify the Proposer's emergency response time and availability, including nights, weekends, and holidays.

• Lead Times: Identify anticipated lead times for commonly required parts, equipment, new or replacement HVAC systems or units, and repairs.

• Completion Timeframes: Describe the Proposer's ability to complete repairs equipment replacements, installations, and other authorized work within reasonable timeframes and communicate any circumstances that may delay completion.

• Emergency Response Guarantee: Provide a clear outline of the Proposer's ability to meet the proposed emergency response times

2.6. Citywide and Aviation Service Requirements

• Citywide Facilities: Describe the Proposer's ability to provide HVAC maintenance and repair services at multiple City facilities and coordinate work through the City's designated Facility

Maintenance representative. Proposers shall describe their ability to accommodate changes in facilities, buildings, locations, equipment, and quantities during the Contract term.

• Aviation Facilities: Acknowledge that Aviation HVAC equipment and applicable unit specifications are included in this RFP for informational and potential future contracting purposes. Aviation is currently under a separate HVAC maintenance agreement that is expected to expire on March 1, 2028, unless the agreement expires or terminates earlier. Proposers shall identify their ability to service the Aviation equipment identified in the solicitation if the City elects to include such equipment in a resulting contract.

• Separate Coordination: Acknowledge that Citywide and Aviation HVAC services may be coordinated and managed separately by the City. Aviation will continue to manage its own HVAC maintenance, service requests, work orders, scheduling, and coordination for Aviation facilities.

• Multiple Locations: Proposers must identify the equipment categories and locations they are capable of servicing. The City may utilize one contractor or multiple contractors based on the equipment category, facility location, service requirements, and proposer capabilities.

• Equipment and Facility Changes: Acknowledge that the City may add, remove, replace, relocate, or modify facilities, buildings, locations, equipment, and quantities during the Contract term.

Proposers shall describe their ability to accommodate such changes and provide services for equipment added during the Contract term.

• · Existing, New, and Replacement Equipment: The City may add existing equipment as current maintenance, service, or warranty agreements expire or conclude, as well as new, replacement, upgraded, or modified HVAC equipment added during the Contract term. Proposers shall describe their ability to incorporate such equipment into their service program, including the removal and replacement or installation of HVAC equipment when authorized by the City.

• Aviation Equipment: Proposers acknowledge that the City may, but is not obligated to, add all, some, or none of the Aviation HVAC equipment or services to a resulting Contract. The City may elect not to amend a resulting Contract to include Aviation equipment or services.

2.7. Licensing and Certifications

• Local and State Compliance: Vendors must possess and maintain all required licenses and permits to operate and provide HVAC maintenance and repair services within the City of Killeen, Bell

County, and the State of Texas.

• TDLT ACR License: Proposers shall maintain all applicable Texas Department of Licensing and

Regulation (TDLR) Air Conditioning and Refrigeration Contractor licensing requirements for the services proposed. Proposers shall identify their applicable license class, endorsements, license number, and expiration date.

• Federal Compliance: Vendors must not be listed on the federal debarment, suspension, or excluded parties list (as maintained by the U.S. General Services Administration) and must certify their eligibility to contract with federal and federally funded entities.

• Personnel Certification: Personnel performing HVAC services must possess all licenses, certifications, registrations, and qualifications required for work to be performed and in compliance with local, state, federal, OSHA, and FEMA regulations.

• Refrigerant Certification: Personnel handling refrigerants must maintain all applicable certifications required by Federal law, including EPA Section 608 certification, as applicable to the services performed.

• Regulatory Compliance: All services must comply with applicable Federal, State, and local laws, regulations, codes, safety requirements, and industry standards.

• Subcontractor Compliance: Subcontractors must also meet all licensing and compliance requirements, and adherence to federal procurement guidelines.

2.8. Service and Job Requirements

• Timely Service: Provide services promptly and in accordance with the response and completion timeframes established in the resulting contract. Routine and scheduled services shall be coordinated with the City's designated representative and performed within a reasonable and mutually agreed-upon timeframe based on the City's operational needs, facility availability, and the nature of the work.

• Work Authorization: Obtain authorization from the City's designated representative before performing repairs, equipment replacements, new installations or other work outside the authorized scope of routine services.

• Site Access: Coordinate facility access and scheduling with the City's designated representative prior to performing work, except where emergency conditions require immediate response.

• Job Sites: Maintain work areas in a safe, neat, and orderly condition throughout the duration of the work.

• Equipment Protection: Take reasonable measures to protect City buildings, equipment, furnishings, and other property from damage while performing services.

• Removal of Debris: Remove replaced parts, debris, refrigerant containers, packaging, and other materials generated by the Proposer's work unless otherwise directed by the City.

• Service Reports: Provide documentation following service that identifies the equipment serviced, work performed, deficiencies identified, parts or materials used, and recommendations for additional work.

• Emergency Services: Provide emergency HVAC services when requested by the City, including after-hours, weekends, and holidays, as proposed.

• 24/7 Availability: Clearly identify whether 24/7 emergency service is available and any limitations or conditions associated with such availability.

• Response Time Guarantee: Provide a clear outline of the Proposer's ability to meet the emergency response time requirements proposed in the solicitation.

• Quality Assurance: Implement quality control measures to ensure work is performed correctly and that identified deficiencies are appropriately addressed, including applicable startup, testing, and verification of replacement or newly installed equipment.

• Documentation and Reporting: Maintain accurate records of maintenance, inspections, service calls, repairs, equipment replacements and installations, parts, materials, refrigerant usage, and other applicable service activities and provide reports to the City upon request.

2.9. Term of Contract and Option to Extend

Any contract resulting from this solicitation shall be effective on the date that the last required signature is affixed and shall be in effect for one (1) year. The City anticipates that the contract shall be renewed pursuant to the availability of funds and at the discretion of the City.

The City may request up to an additional sixty (60) days Service Period past the initial or any renewal term to advertise and award a new contract for services / items, without any pricing adjustments.

It is agreed that the contract will automatically renew four (4) times, for one (1) year renewal terms, unless the City or Contractor serves written notice 60 days before the contract termination, or sixty (60) days before the end of any renewal term. The City will notify Contractor that the contract will not be renewed if funding is unavailable or if the contractor’s past performance is not within industry standards.

Notwithstanding anything to the contrary, this contract shall not exceed a total of four (4) years or total

$100,000 or more without prior City Council approval.

A. Price Escalation Clause: Should market conditions warrant an increase, the successful contractor may submit documentation requesting permission to increase pricing no later than 90 days before the end of each one (1) Year of the contract. If the contractor fails to give timely notice, the price may not be increased. Escalation may only occur after the initial one (1) Year of the contract or after extension. Nevertheless, any request for an increase shall not be applied automatically but shall only apply upon written approval by the City which may only be withheld without just cause, including but not limited to, insufficient funding. Any approved price increase shall not exceed ten percent (10%) of the current contract price during any twelve (12)-month period. The ten percent (10%) is the maximum allowable increase and does not guarantee or entitle the

Contractor to a price increase. The Contractor must provide information showing that its costs have increased and the amount of the increase. Requests for price increases must be solely for the purpose of accommodating an increase in the contractor's cost, not profits.

B. Tariff Clause: In the event of any changes in tariffs, duties, or taxes imposed by governmental authorities that directly affect the cost of goods or services provided under this contract, the following provisions shall apply:

o Notification Requirement: The Contractor shall notify the Procuring Entity in writing within

10 business days upon becoming aware of any such changes. The notification must include:

▪ The specific tariff or duty imposed or changed.

▪ The effective date of the change.

▪ The impact on the cost of the goods or services provided.

▪ Supporting documentation, such as official notices or tariff schedules.

o Adjustment Mechanism: Upon receipt of the notification and supporting documentation, the Procuring Entity and the Contractor shall mutually agree on an equitable adjustment to the contract price. This adjustment will reflect the increased costs attributable to the tariff change and will be implemented in a manner that is fair and reasonable to both parties.

o Maximum Increase Limit: Any price adjustment due to tariff changes shall not exceed 10% of the original contract price.

o Limitations: Adjustments under this clause shall be limited to the direct costs incurred due to the tariff change and shall not exceed the actual increase in costs. No adjustments will be made for indirect costs or for any other reasons not directly attributable to the tariff change.

o Response Timeline: A response to the request for adjustment will be prepared by the

Procuring Entity within 10 business days of receipt of the request.

o Finality of Determinations: All determinations made by the City regarding tariff-related adjustments are final.

A. Pricing shall reflect the full Scope of services as defined, including all associated costs for delivery, labor, insurance, taxes, overhead, and profit.

B. Proposer must quote unit pricing in accordance with the itemized listing of products or contract segments.

Any request in price change with supporting documentation must be sent to :

City of Killeen

Attn: Purchasing Division

802 N 2nd Street

Building G, 2nd Floor

Killeen, TX 76541

Or

Email: Purchasing@KilleenTexas.gov

On the envelope place “Price Change Notification '27-17, HVAC Maintenance and Repair Service”

If during any term of this contract, the Proposer should enter into any contract with another municipality within Texas for similar commodities or services with a similar scope of work with rates more favorable than those granted to the City of Killeen, or if there is a decrease in Contractor’s cost to perform services mailto:Purchasing@KilleenTexas.gov herein the Proposer agrees to modify this contract to include such more favorable rates and or decrease in cost. It is recommended that the Proposer provide any rate reduction or discount voluntarily.

2.10. Insurance

All proposers shall maintain the appropriate amount of insurance required for the performance of the

Contract once awarded. This coverage shall be maintained throughout the term of the Contract and shall provide protection against claims, damages, losses, or liabilities arising from the proposer’s performance of the Contract. The successful proposer shall furnish certificates of insurance evidencing the required coverage when requested by the City and, if applicable, upon renewal of any required policies during the term of the Contract.

A. Comprehensive General Liability and Property Damage Insurance.

The Proposer shall take out and maintain during the life of this Contract such Comprehensive General

Liability and Property Damage Insurance as shall protect the City from claims for damages or personal injury, including accidental death, as well as from claims for property damages which may arise from the performance of work, services, delivery of goods, or other obligations under this Contract, whether such operations be by himself or by a subcontractor or by anyone directly or indirectly employed by either of them, and the minimum amounts of such insurance shall be as follows:

1. Bodily Injury

A. Each Occurrence - $1,000,000

B. Annual Aggregate - $2,000,000

2. Property Damage Insurance

A. Each Occurrence - $1,000,000

B. Annual Aggregate - $2,000,000

B. Comprehensive Automobile Liability.

The Proposer shall maintain Automobile Liability Insurance for owned, hired, and non-owned vehicles used in the performance of this Contract, with minimum limits as follows:

1. Bodily Injury

A. Each Person - $500,000

B. Each Accident - $1,000,000

2. Property Damage

A. Each Occurrence - $1,000,000

C. Workers' Compensation and Employers' Liability.

The Proposer shall maintain Workers' Compensation Insurance in accordance with the requirements of the Texas Workers' Compensation Act for all employees engaged in the performance of this Contract.

Employers' Liability Insurance shall be maintained with minimum limits of:

A. Each Accident - $100,000

B. Disease – Each Employee - $100,000

C. Disease – Policy Limit - $500,000

If the Proposer is not required by law to maintain Workers' Compensation Insurance, the Proposer shall notify the City in writing prior to contract execution.

D. Additional Insurance Requirements.

A. The City of Killeen, its officers, officials, employees, and volunteers shall be named as Additional

Insured on the Commercial General Liability and Automobile Liability policies.

B. Insurance coverage shall be primary and noncontributory with respect to any insurance or self-insurance maintained by the City.

C. The Proposer shall provide a Waiver of Subrogation in favor of the City of Killeen on all policies where permitted by law.

D. The insurance required by this section shall remain in full force and effect throughout the term of the Contract.

E. The City reserves the right to request copies of applicable insurance policies at any time.

F. The vendor must ensure that any subcontractors have appropriate insurance coverage that meets or exceeds the requirements outlined in the solicitation. Proof of subcontractor insurance must be provided upon request.

2.11. Subcontractor Requirements

• Identification and Qualifications: Vendors must clearly identify any subcontractors involved in the proposal and provide a detailed description of their qualifications and experience relevant to the tasks assigned.

• Responsibility: The primary vendor remains responsible for all subcontractor work and must ensure that subcontractors meet the same licensing, certification, and compliance standards as the primary vendor.

2.12. Additional Considerations

Disclose any additional terms, service limitations, or conditions applicable to your proposal.

Proposers shall clearly identify any portion of the Scope of Work that they are unable to provide or any requirements they are unable to meet. Failure to identify exceptions may be considered an indication that the Proposer is capable of meeting the requirements of the solicitation.

3. Evaluation Methodology

The City of Killeen is committed to a competitive selection process and will evaluate proposals based on the criteria outlined in this solicitation. Proposers must demonstrate their ability to meet or exceed the

City’s service requirements.

Proposals will be reviewed and scored by an Evaluation Committee. The City reserves the right to request additional information, seek clarifications, or conduct interviews / presentations during the evaluation process. A Phase 2 Optional Interview / Presentation / Demonstration process may be utilized, if needed, to further evaluate and confirm proposer qualifications.

Specifications set forth herein define the minimum requirements and performance expectations. They are not intended to disqualify any capable proposal; rather, they communicate the level of quality and service the City expects. If a proposer takes an exception to any specification, a detailed explanation must accompany the response. Failure to meet mandatory requirements may result in the proposal being deemed non-responsive.

Because the City cannot predict future needs with certainty, no guaranteed minimums or fixed quantities are promised. Any quantities shown are estimates only; the City reserves the right to increase or decrease those quantities. These estimates shall not be construed as binding minimums or maximums.

Submission of a proposal does not guarantee the award of a contract. The City of Killeen reserves the right to reject any or all proposals, waive minor irregularities, and make an award determined to be in the best interest of the City.

Preferred Method –Weighted Best Value

Evaluation Criteria & Weights (Subject to change based on project needs)

Criterion Weight (%)

Pricing and Payment Terms (20%)

Service and Technical Support (25%)

Customer Service and Account Management (10%)

Licensing and Certification (10%)

Service and Job Requirements (25%)

Subcontractor Infor. & Additional Considerations (10%)

Phase 2 – Optional Interview / Presentation / Demonstration (Up to 100 Points, if conducted)

If the City elects to proceed with Phase 2, shortlisted proposers may be invited to participate in interviews, presentations, and/or demonstrations. This phase, if conducted, will be scored separately for up to 100 points and may be used to further evaluate qualifications, clarify proposals, and confirm understanding of project requirements. Participation is by invitation only and not guaranteed for all proposers.

Award Determination

• Rank the proposers based on their total weighted scores.

• Verify the top-scoring proposals meet the City’s goals, budget, and requirements.

• If necessary, invite top proposers for interviews, presentations, or Phase 2 evaluations to clarify questions or provide additional information

• Make a recommendation to City Council for award of the contract to the proposer that is responsive, responsible, and provides the best value to the City.

3.1. Evaluation of Proposal Sections

No. Evaluation Criteria Scoring Method Weight (Points)

1. Pricing and Payment Terms

Evaluation Focus:

• Detailed and transparent pricing for the applicable HVAC service category or categories

• Clear pricing for HVAC equipment below 7.5 tons and/or 7.5 tons and above

• Preventive maintenance pricing and service rates

• Regular, after-hours, weekend, holiday, and emergency labor rates

• Parts, materials, refrigerant, equipment, freight, delivery, and applicable markup

• Diagnostic and service call charges

• Pricing methodology for new, replacement, upgraded, or modified HVAC equipment, including removal, installation, startup, testing, labor, materials, and associated costs, if applicable

• Availability of discounts and other cost-saving opportunities

• Clear and reasonable payment terms

• Transparent procedures for approved price adjustments

Points Based 20

(20% of Total)

• All-inclusive pricing that identifies all costs necessary to perform the required services

2. Service and Technical Support

• Demonstrated ability to provide HVAC maintenance and repair services for the applicable equipment category or categories

• Experience servicing HVAC equipment below 7.5 tons and/or 7.5 tons and above

• Preventive maintenance and inspection program

• Ability to diagnose and repair heating, cooling, refrigeration, controls, and related HVAC components, including boilers and other applicable heating equipment

• Ability to provide refrigerant services and comply with applicable requirements

• Availability of qualified and properly certified technicians

• After-hours and emergency service capabilities

• Response times and scheduling flexibility

• Ability to service multiple

Citywide and, if Aviation equipment is added to a resulting Contract, Aviation facilities and equipment

• Ability to incorporate existing equipment as warranties or

Points Based 25

(25% of Total) other maintenance/service agreements expire or conclude

• Ability to service new, replacement, upgraded, or modified equipment added during the Contract term

• Ability to accommodate changes in facilities, buildings, locations, equipment, and quantities during the Contract term

• Quality control mechanisms and industry/regulatory compliance

• Service documentation, reporting, and recordkeeping

3. Customer Service and Account

Management

Evaluation Focus:

• Defined customer service channels and availability

• Appointment of a designated representative and/or account manager

• Ability to coordinate service requests with Facility

Maintenance and, when applicable, Aviation staff

• Clear communication regarding service requests, scheduling, delays, deficiencies, and completion

• Responsiveness to City inquiries and service needs

• Clear escalation process for unresolved service issues

• Ability to manage service requests across multiple facilities and equipment locations

• Customer service approach and commitment to maintaining consistent communication throughout the Contract term

Points Based 10

(10% of Total)

4. Licensing and Certification

• Valid licenses, registrations, and certifications applicable to the HVAC services proposed

• Compliance with applicable

Texas Department of Licensing and Regulation (TDLR) Air

Conditioning and Refrigeration

Contractor requirements

• Applicable technician qualifications and certifications

• Compliance with applicable

EPA Section 608 refrigerant requirements

• Compliance with applicable local, state, and federal requirements

• Not listed on applicable federal debarment or exclusion lists

• Compliance with applicable regulatory and safety requirements

• Certification and compliance of proposed subcontractors, if applicable

5. Service and Job Requirements

• Ability to provide timely routine, preventive, urgent, and emergency HVAC services

• Ability to meet proposed response and completion timeframes

• Ability to coordinate routine and scheduled work with the

City's designated representative and perform such work within a reasonable and mutually agreed-upon timeframe based on the City's operational needs, facility availability, and the nature of the work

• 24/7 availability or emergency response capability, as proposed and required

• Work authorization and service call procedures

• Ability to perform authorized equipment replacement, installation, startup, testing, and verification

• Site access and coordination requirements

• Protection of City property, buildings, equipment, and surrounding areas

Points Based 25

(25% of Total)

• Proper handling and disposal of removed parts, materials, refrigerants, and debris

• Service reports and documentation following completed work

• Equipment startup, testing, and verification following repairs or installation-related services

• Quality assurance and workmanship

• Safety procedures and compliance

• Ability to provide continuity of service and backup resources when needed

• Ability to support multiple City facilities and locations

• Ability to accommodate changes in facilities, buildings, locations, equipment, and quantities during the Contract term

• Ability to provide services for the applicable equipment category or categories throughout the Contract term

6. Subcontractor Information and

Additional Considerations

Evaluation Focus:

• Identification and qualification of proposed subcontractors

• Subcontractor experience relevant to HVAC maintenance and repair services

• Subcontractor compliance with applicable licensing, certification, insurance, and regulatory requirements

• Demonstrated capacity for full accountability over subcontracted work

• Availability of additional resources, technicians, equipment, or specialized services

• Service capabilities, technology, or value-added features that support the City's requirements

• Ability to provide continuity of services during periods of increased demand, emergencies, or technician availability issues

• Ability to accommodate changes in service requirements,…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .