Hull _Waterborne_ Clean and Inspect Renew Zinc Anodes SOW.docx
DOCX document 25 KB Posted
- Solicitation number
- 52000QR250001974
About this file
This is a Statement of Work (SOW) and associated solicitation for underwater hull cleaning, inspection, and zinc anode replacement services for the USCGC EDGAR CULBERTSON, located in Galveston, TX. The contractor must clean the underwater body surfaces of marine growth, inspect and polish propellers and rudders, and replace various government-furnished zinc anodes including stern tube anodes, sea chest grate anodes, propeller zinc plates, and bow thruster anodes. The work requires video documentation of underwater surfaces before and after cleaning.
The solicitation (52000QR250001974) is a total small business set-aside under NAICS code 336611 with a size standard of 1,250 employees. Work is to be performed February 12-24, 2025 at the cutter's home port in Galveston. Quotes must be submitted by January 28, 2025 at 10:00 AM EST to Cornelius Claiborne. The Department of Homeland Security US Coast Guard will award a firm-fixed-price contract using simplified acquisition procedures, evaluating proposals based on price, specifications, past performance, and quality. Vendors must be registered in SAM.gov and include detailed cost breakdowns in their proposals.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
U/W Body (Waterborne), Clean and Inspect, Renew Zinc Anodes
1. Scope
1.1 Intent. This work item describes the requirements for the Contractor to clean the vessel’s U/W body and to renew bolt-on zinc anodes, while the vessel is moored pier side (USCGC EDGAR CULBERTSON 3000 Fort Point Road Galveston, Tx 77550).
1.2 Government-furnished property.
| MTI |
| ITEM DESCRIPTION |
| NSN/PN |
| QTY |
| ESTIMATED COST |
($/UNIT)
| N |
| Anode, stern tube |
| P/N: Z0020202H3 |
NIIN: 016445483
| 28 ea. |
| $11.15 |
| N |
| Nut, Self-Locking |
| P/N: 90715A145 |
NIIN: 015085774
2 Bx *24 in a bx $7.24
| N |
| Anode, Sea Chest Grate |
| P/N: GA-4 |
NIIN: 016476179
| 4 ea. |
| $21.93 |
| N |
| Screw, Prop zinc plate |
| P/N: 950756 |
NIIN: 016340210
| 8 ea. |
| $9.42 |
| N |
| Screw, Sea Chest Grate Anode, |
| P/N: 93190A634 |
NIIN: 016197182
| 4 ea. |
| $9.70 |
| N |
| Screw Cap, Stern Tube Covers |
| P/N: 90585A626 |
NIIN: 016161107
| 42 ea. |
| $1.81 |
| N |
| Zinc plate, propeller |
| P/N: 950733 |
NIIN: 016278941
| 2 ea. |
| $618.85 |
| N |
| Anode, Bow Thruster, Gear Case, Bolt On |
| P/N: 1081226 |
NIIN: 123561870
| 1 ea. |
| $64.97 |
| N |
| Anode, Bow Thruster, Tunnel, Bolt On |
| P/N: CM2000Z |
NIIN: 200126334
| 12 ea. |
| $29.46 |
2. REFERENCES
Coast Guard Drawings Coast Guard Drawing 154 WPC 111-301, Rev B, Shell Expansion Coast Guard Drawing 154 WPC 161-301, Rev C, Skegs and Stern Tubes Support Structures Coast Guard Drawing 154 WPC 562-201, Rev A, Rudder Details Coast Guard Drawing 154 WPC 565-201, Rev -, Fin Stabilizer System A & D Coast Guard Drawing 154 WPC 568-201, Rev B, Bow Thruster System A & D Coast Guard Drawing 154 WPC 997-302, Rev -, Docking Plan Coast Guard Publications Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements Surface Forces Logistics Center Maintenance Procedure Card B10015.D (MPC B10015.D), 5/31/17, Insp/Cln U/W Equipment (Hull Plate) Surface Forces Logistics Center Maintenance Procedure Card B10018.D (MPC B10018.D), 3/15/19, replace Underwater Zinc Anodes Other References None
3. REQUIREMENTS
3.1 General.
3.1.1 CIR.
None.
3.1.2 Tech Rep.
Not Applicable.
3.1.3 Protective measures. The Contractor must furnish and install all protective coverings to seal off and protect all non-affected vessel's components, equipment, and spaces near the work area against contamination during the performance of work. Upon completion of work, the Contractor must remove all installed protective measures, inspect for the presence of contamination, and return all contaminated equipment, components, and spaces to original condition of cleanliness.
3.1.4 Interferences. The Contractor must handle all interferences in accordance with SFLC Std Spec 0000, paragraph 3.3.5 (Interferences).
3.2 Requirements. The Contractor must:
3.2.1 Video recording. Submit video highlights of underwater body surfaces (e.g. bow thruster, propellers, rudders, transducers, heavily fouled hull areas, etc.) before and after cleaning.
3.2.2 Clean/inspect. Clean the U/W body surfaces free of all marine growth, debris, and all other surface contaminants in accordance with MPC B10015.D. Ensure all transducer surfaces are cleaned with only hand held brushes, without the use of power attachments. Ensure that existing u/w body coating system or non-coated surfaces do not incur any damage during cleaning process. Polish propellers and rudders. Refer to Coast Guard drawings listed in Section 2.
3.2.3 Renew anodes. Renew Government-furnished components listed below paragraph 1.2. in accordance with MPC B10018.D.
4.0.0 Period of Performance. Feb 12-24, 2025 at cutters home port Base Galveston Texas. Cutter POC is MKC Adrian Lopez (831) 207-8084.
File details come from the government source that posted it. Updated .