HSDAS PC Rackmount Computers_SOW.pdf

EDTF-HSDAS Computer System Tech Refresh Detailed Specifications/Requirements

Item 0001 Quantity : 31

2U 19 inch rackmount computer workstation with the following specifications:

1. 2U 19 inch rackmount chassis.

2. Chassis must not exceed a depth of 26” from the front of chassis; not including slide out handles if installed.

3. Minimum dual hot-swappable redundant power supply.

4. Chassis must only be cooled from front and back. Top and bottom may not contain cooling vents.

5. Must include a single Intel Xeon Gold 6242R 20-core or equivalent processor, operating at 3.1 Ghz, 35.75MB

Cache.

6. Must minimally include two open and usable PCIe 3.0 x8 expansion slots and one open and usable PCIe 3.0 x16.

a. Low profile PCIe card slots are acceptable.

7. Must include a minimum 64 GB 2933 MHz DDR4 ECC RAM, configured for maximum memory performance.

8. Must minimally contain the following network interfaces:

a. Two 10-Gigabit RJ45 Ethernet adaptor

b. Two 1-Gigabit RJ45 Ethernet adaptor

9. Must include a minimum 512 GB NVMe M.2 SSD drive configured as the boot drive.

10. Must additionally include 6, AG-Enterprise Class 24/7 operation rated 1.92TB SATA read intensive SSDs (2.5

in) connected to a RAID controller meeting the following requirements:

a. Must be a 12G SAS/ 6G SATA controller

b. Must be hardware RAID

c. Battery backup unit must be installed

d. Drives must be accessible from the front of the chassis in removable hard drive bays.

11. Must include a VGA video port or be supplied with a VGA adaptor with support for up to 1280x1024 resolution

12. No preinstalled OS is required.

13. Must NOT include a mouse.

14. Must NOT include a keyboard.

15. Trusted Platform Module (TPM) 2.0 must be installed.

16. Must include system controller for out-of-band management.

17. All required system driver software must be included on a CD/DVD; flash memory sticks are not acceptable.

18. Must include at least a DVD-ROM drive that color matches the chassis.

19. Must include at least one USB 3.0 port accessible from the front of the chassis.

20. Must include quantity 2 C13 to NEMA 5-15P PDU Style, 10 Amp, 6 foot power cords.

21. Must include all necessary slide rail hardware for mounting in a 19 inch rack 36” deep. The rails must support installation in standard square hole computer room racks.

22. All installed interface adaptors (video, RAID, networking) must support UEFI OROMS (PCIE slot set to EFI) and be capable of supporting BIOS setting with CSM Support DISABLED and Secure Boot ENABLED.

23. Must NOT include a mouse.

24. Must NOT include a keyboard.

25. All required system driver software must be included on a CD/DVD; flash memory sticks are not acceptable.

26. Manufacturer must be NIST 800-53 Supply Chain Security compliant.

27. All installed components must be supplied from an Original Component Manufacturer (OCM), Original Equipment

Manufacturer (OEM), or through an OCM/OEM authorized distribution chain. Products or materials shall not be acquired from an independent distributor.

28. Shall not include counterfeit parts or suspected counterfeit parts, defined as material for which credible evidence (including but not limited to, visual inspection or testing) provides reasonable doubt that the component is authentic.

Item 0002 Quantity : 3

2U 19 inch rackmount computer workstation with the following specifications:

1. 2U 19 inch rackmount chassis.

2. Chassis must not exceed a depth of 30” from the front of chassis; not including slide out handles if installed.

3. Minimum dual watt hot-pluggable redundant internal power supply.

4. Chassis must only be cooled from front and back. Top and bottom may not contain cooling vents.

5. Must contain dual Intel Xeon Gold 6246R 16-core or equivalent processor, operating at 3.4 GHz, 35.75 MB

Cache.

6. Must minimally include two open and usable PCIe 3.0 x8 expansion slots and one open and usable PCIe 3.0 x16.

a. Low profile PCIe card slots are acceptable.

7. Must include a minimum 512 GB 2933 MHz DDR4 ECC RAM, configured installed for maximum memory performance.

8. Must minimally contain the following network interfaces:

a. Two 10-Gigabit RJ45 Ethernet adaptor

b. Two 1-Gigabit RJ45 Ethernet adaptor

9. Must include a minimum 512 GB NVMe M.2 SSD drive configured as the boot drive.

10. Must additionally include 4, AG-Enterprise Class 24/7 operation rated 1.92TB SATA read intensive SSDs (2.5

in) connected to a RAID controller meeting the following requirements:

a. Must be a 12G SAS/ 6G SATA controller

b. Must be hardware RAID

c. Battery backup unit must be installed

d. Drives must be accessible from the front of the chassis in removable hard drive bays.

11. No preinstalled OS is required.

12. Must include a VGA video port or be supplied with a VGA adaptor with support for up to 1280x1024 resolution

13. Must NOT include a mouse.

14. Must NOT include a keyboard.

15. Trusted Platform Module (TPM) 2.0 must be installed.

16. Must include system controller for out-of-band management.

17. Must include at least a DVD-ROM drive that color matches the chassis.

18. Must include at least one USB 3.0 port accessible from the front of the chassis.

19. Must include quantity 2 C13 to NEMA 5-15P PDU Style, 10 Amp, 6 foot power cords.

20. Must include all necessary slide rail hardware for mounting in a 19 inch rack 36” deep. The rails must support installation in standard square-hole computer room racks.

21. All installed interface adaptors (video, RAID, networking) must support UEFI OROMS (PCIE slot set to EFI) and be capable of supporting BIOS setting with CSM Support DISABLED and Secure Boot ENABLED.

22. Must NOT include a mouse.

23. Must NOT include a keyboard.

24. All required system driver software must be included on a CD/DVD; flash memory sticks are not acceptable.

25. Manufacturer must be NIST 800-53 Supply Chain Security compliant.

26. All installed components must be supplied from an Original Component Manufacturer (OCM), Original Equipment

Manufacturer (OEM), or through an OCM/OEM authorized distribution chain. Products or materials shall not be acquired from an independent distributor.

27. Shall not include counterfeit parts or suspected counterfeit parts, defined as material for which credible evidence (including but not limited to, visual inspection or testing) provides reasonable doubt that the

Item 0003 Quantity : 2

2U 19 inch, 2U rackmount computer workstation with the following specifications:

1. 2U 19 inch rackmount chassis.

2. Must include all necessary slide rail hardware for mounting in a 19 inch rack 30” deep.

3. Minimum dual hot-swappable redundant power supply.

4. No preinstalled OS required.

5. Chassis must only be cooled from front and back. Top and bottom may not contain cooling vents.

6. Must include a single Intel Xeon Bronze 3204 6-core or equivalent processor, operating at 1.9 GHz, 8.25MB

Cache.

7. Must minimally include two open and usable PCIe 3.0 x8 expansion slots and one open and usable PCIe 3.0 x16.

a. PCIe slots must accommodate qty. two (2) Microgate Systems, LTD SyncLink GT4e Adapter full height

PCIe cards (not included in procurement). A riser card is acceptable.

8. Must include a minimum 32 GB 2933 MHz DDR4 ECC RAM configured for maximum memory performance.

9. Must minimally contain the following network interfaces:

a. Two 10-Gigabit RJ45 Ethernet adaptor

b. Two 1-Gigabit RJ45 Ethernet adaptor

10. Must include a minimum 512 GB M.2 PCIe NVMe Class 40 solid state drive to be used as boot drive.

11. Must include a VGA video port or be supplied with a VGA adaptor with support for up to 1280x1024 resolution

12. Trusted Platform Module (TPM) 2.0 must be installed.

13. Must include system controller for Out-of-Band Management

14. Must include at least a DVD-ROM drive that color matches the chassis.

15. Must include at least one USB 3.0 port accessible from the front of the chassis.

16. Must include quantity 2 C13 to NEMA 5-15P PDU Style, 10 Amp, 6 foot power cords.

17. Must include all necessary slide rail hardware for mounting in a 19 inch rack 36” deep. The rails must support installation in standard square-hole computer room racks.

18. All installed interface adaptors (video, RAID, networking) must support UEFI OROMS (PCIE slot set to EFI) and be capable of supporting BIOS setting with CSM Support DISABLED and Secure Boot ENABLED.

19. Must NOT include a mouse.

20. Must NOT include a keyboard.

21. All required system driver software must be included on a CD/DVD; flash memory sticks are not acceptable.

22. Must operate in the temperature range of 0 Degrees Celsius to +50 Degrees Celsius

23. Manufacturer must be NIST 800-53 Supply Chain Security compliant.

24. All installed components must be supplied from an Original Component Manufacturer (OCM), Original Equipment

Manufacturer (OEM), or through an OCM/OEM authorized distribution chain. Products or materials shall not be acquired from an independent distributor.

25. Shall not include counterfeit parts or suspected counterfeit parts, defined as material for which credible evidence (including but not limited to, visual inspection or testing) provides reasonable doubt that the