Attachment

158 KB Posted

Attached to
Refuse and Recycling Collection and Disposal Services
Solicitation number
HSCG84-10-Q-AA1355
Issued by

About this file

Solicitation pages 2 to 59

Text of this file

CONTINUATION SHEETREFERENCE NO. OF DOCUMENT BEING CONTINUEDPAGES
RFQ: HSCG84-10-Q-AA1355
Page 48 of 59

NAME OF OFFEROR OR CONTRACTOR

Continuation of Block 16 - Contract Management of SF 1449

Notwithstanding the Contractor’s responsibility for total management during the performance of the contract, the administration of the contract will require maximum coordination between the Government and the contractor. The individuals listed below will be the Government points of contact during the performance period as follows:

a. All contract administration will be effected by the U. S. Coast Guard Shore Infrastructure Logistics Center (SILC) PCB2, 300 East Main Street, Suite 965, Norfolk, VA 23510-9113.

b. The U. S. Coast Guard SILC (pcb-2), Contracting Section, 300 East Main Street, Suite 965, Norfolk, VA 23510-9113 will effect all contract administration. Communication pertaining to contractual administrative matters shall be addressed to the Contracting Officer, Mrs. Jeanie Thorne, Telephone No: (757) 628-4109. Changes in, or deviation from, the scope of work will not be effected without a written modification to the contract as executed by the Contracting Officer.

c. The Contract Specialist/Administrator, Ms. Patty Scott, Telephone No: (757) 628-4157, serves as the point of contact between the Contractor, Contracting Officer and Contracting Officer’s Technical Representative (COTR); however, does not have a warrant that provides the authority to contractually commit the Government.

d. The Contracting Officer's Technical Representative (COTR) is a Government personnel designated in writing by the Contracting Officer to act as technical advisor for the Contracting Officer for items within the scope of the contract. The COTR performs functions such as review and/or inspection and acceptance of supplies and services and of a technical nature. A designation letter will set forth the authorities and limitations of the COTR under the contract.

Continuation of SF 1449 - Block 18b/Invoice Procedures, Addendum IAW 12.302(d)

(1) The Contractor shall submit an original invoice, not a facsimile, for services rendered to: Commander (pcb-2), U. S. Coast Guard Shore Infrastructure Logistics Center (SILC), Attn: Contracting Officer, 300 East Main Street, Suite 965, Norfolk, VA 23510-9113; or submit invoices via e-mail to: Timothy. M.Shuhart@uscg.mil, for which is the preferred method.

(2) Simultaneously, the Contractor shall submit an invoice copy to the applicable COTR for certification at the following office: Commanding Officer, USCG Academy (ee),15 Mohegan Avenue, New London, CT 06320, Attn: COTR Mark Buck at (860) 444-8224.

It is imperative that both the Contracting Officer and the COTR receive a copy of the invoice at the same time in order to process payment in a timely manner. Please note that payment may be delayed if your invoice is not submitted to the COTR also.

Invoice shall be submitted on a monthly basis; and, only after completion of the monthly services, not prior to or during the actual performance period, unless prior arrangements have been made with the Contracting Officer’s approval.

Base Year - 1 October 2010 through 30 September 2011

CLIN
Schedule of Supplies/Services
Firm-Fixed Work: Refuse Collection
Qty
Unit
Unit Price
Total Price
00001
Nine/8-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$
00002
Two/6-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$
00003
One/4-cy Container as outlined in Section 2.4 of PWS
12
MO
$
$
00004
One/30-yd Cardboard Compactor as outlined in Section 2.4 of PWS
12
MO
$
$

Firm-Fixed Work: Recycling Collection

00005
Four/8-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$

Unscheduled Work: Refuse Collection (Estimated Quantity)

00006
One/30-yd Bulk Waste
72
EA
$
$
00007
One/20-yd Bulk Waste
6
EA
$
$
00008
Galley Service
3
EA
$
$

Unscheduled Work: Disposal Fees (Estimated Quantity)

00009
Disposal Fees For Scheduled Refuse Collection
400
TN
$
$
00010
Disposal Fees for Bulk Waste
200
TN
$
$
00011
Disposal Fees for Galley Service
3
TN
$
$
00012
Disposal Fees for Yard Waste
84
TN
$
$

BASE YEAR TOTAL (ALL WORK) $_______________

Option Year One - 1 October 2011 through 30 September 2012

CLN
Schedule of Supplies/Services
Firm-Fixed Work: Refuse Collection
Qty
Unit
Unit Price
Total Price
10001
Nine/8-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$
10002
Two/6-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$
10003
One/4-cy Container as outlined in Section 2.4 of PWS
12
MO
$
$
10004
One/30-yd Cardboard Compactor as outlined in Section 2.4 of PWS
12
MO
$
$

Firm-Fixed Work: Recycling Collection

10005
Four/8-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$

Unscheduled Work: Refuse Collection (Estimated Quantity)

10006
One/30-yd Bulk Waste
72
EA
$
$
10007
One/20-yd Bulk Waste
6
EA
$
$
10008
Galley Service
3
EA
$
$

Unscheduled Work: Disposal Fees (Estimated Quantity)

10009
Disposal Fees For Scheduled Refuse Collection
400
TN
$
$
10010
Disposal Fees for Bulk Waste
200
TN
$
$
10011
Disposal Fees for Galley Service
3
TN
$
$
10012
Disposal Fees for Yard Waste
84
TN
$
$

OPTION YEAR ONE TOTAL (ALL WORK) $__________________

Option Year Two - 1 October 2012 through 30 September 2013

CLIN
Schedule of Supplies/Services
Firm-Fixed Work: Refuse Collection
Qty
Unit
Unit Price
Total Price
20001
Nine/8-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$
20002
Two/6-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$
20003
One/4-cy Container as outlined in Section 2.4 of PWS
12
MO
$
$
20004
One/30-yd Cardboard Compactor as outlined in Section 2.4 of PWS
12
MO
$
$

Firm-Fixed Work: Recycling Collection

20005
Four/8-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$

Unscheduled Work: Refuse Collection (Estimated Quantity)

20006
One/30-yd Bulk Waste
72
EA
$
$
20007
One/20-yd Bulk Waste
6
EA
$
$
20008
Galley Service
3
EA
$
$

Unscheduled Work: Disposal Fees (Estimated Quantity)

20009
Disposal Fees For Scheduled Refuse Collection
400
TN
$
$
20010
Disposal Fees for Bulk Waste
200
TN
$
$
20011
Disposal Fees for Galley Service
3
TN
$
$
20012
Disposal Fees for Yard Waste
84
TN
$
$

OPTION YEAR TWO TOTAL (ALL WORK) $___________________

Option Year Three - 1 October 2013 through 30 September 2014

CLIN
Schedule of Supplies/Services
Firm-Fixed Work: Refuse Collection
Qty
Unit
Unit Price
Total Price
30001
Nine/8-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$
30002
Two/6-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$
30003
One/4-cy Container as outlined in Section 2.4 of PWS
12
MO
$
$
30004
One/30-yd Cardboard Compactor as outlined in Section 2.4 of PWS
12
MO
$
$

Firm-Fixed Work: Recycling Collection

30005
Four/8-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$

Unscheduled Work: Refuse Collection (Estimated Quantity)

30006
One/30-yd Bulk Waste
72
EA
$
$
30007
One/20-yd Bulk Waste
6
EA
$
$
30008
Galley Service
3
EA
$
$

Unscheduled Work: Disposal Fees (Estimated Quantity)

30009
Disposal Fees For Scheduled Refuse Collection
400
TN
$
$
30010
Disposal Fees for Bulk Waste
200
TN
$
$
30011
Disposal Fees for Galley Service
3
TN
$
$
30012
Disposal Fees for Yard Waste
84
TN
$
$

OPTION YEAR THREE TOTAL (ALL WORK) $___________________

Option Year Four - 1 October 2014 through 30 September 2015

CLIN
Schedule of Supplies/Services
Firm-Fixed Work: Refuse Collection
Qty
Unit
Unit Price
Total Price
40001
Nine/8-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$
40002
Two/6-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$
40003
One/4-cy Container as outlined in Section 2.4 of PWS
12
MO
$
$
40004
One/30-yd Cardboard Compactor as outlined in Section 2.4 of PWS
12
MO
$
$

Firm-Fixed Work: Recycling Collection

40005
Four/8-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$

Unscheduled Work: Refuse Collection (Estimated Quantity)

40006
One/30-yd Bulk Waste
72
EA
$
$
40007
One/20-yd Bulk Waste
6
EA
$
$
40008
Galley Service
3
EA
$
$

Unscheduled Work: Disposal Fees (Estimated Quantity)

40009
Disposal Fees For Scheduled Refuse Collection
400
TN
$
$
40010
Disposal Fees for Bulk Waste
200
TN
$
$
40011
Disposal Fees for Galley Service
3
TN
$
$
40012
Disposal Fees for Yard Waste
84
TN
$
$

OPTION YEAR FOUR TOTAL (ALL WORK) $___________________

Option Year Five - 1 October 2015 through 30 September 2016

CLIN
Schedule of Supplies/Services
Firm-Fixed Work: Refuse Collection
Qty
Unit
Unit Price
Total Price
50001
Nine/8-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$
50002
Two/6-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$
50003
One/4-cy Container as outlined in Section 2.4 of PWS
12
MO
$
$
50004
One/30-yd Cardboard Compactor as outlined in Section 2.4 of PWS
12
MO
$
$

Firm-Fixed Work: Recycling Collection

50005
Four/8-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$

Unscheduled Work: Refuse Collection (Estimated Quantity)

50006
One/30-yd Bulk Waste
72
EA
$
$
50007
One/20-yd Bulk Waste
6
EA
$
$
50008
Galley Service
3
EA
$
$

Unscheduled Work: Disposal Fees (Estimated Quantity)

50009
Disposal Fees For Scheduled Refuse Collection
400
TN
$
$
50010
Disposal Fees for Bulk Waste
200
TN
$
$
50011
Disposal Fees for Galley Service
3
TN
$
$
50012
Disposal Fees for Yard Waste
84
TN
$
$

OPTION YEAR FIVE TOTAL (ALL WORK) $___________________

Option Year Six - 1 October 2016 through 30 September 2017

CLIN
Schedule of Supplies/Services
Firm-Fixed Work: Refuse Collection
Qty
Unit
Unit Price
Total Price
60001
Nine/8-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$
60002
Two/6-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$
60003
One/4-cy Container as outlined in Section 2.4 of PWS
12
MO
$
$
60004
One/30-yd Cardboard Compactor as outlined in Section 2.4 of PWS
12
MO
$
$

Firm-Fixed Work: Recycling Collection

60005
Four/8-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$

Unscheduled Work: Refuse Collection (Estimated Quantity)

60006
One/30-yd Bulk Waste
72
EA
$
$
60007
One/20-yd Bulk Waste
6
EA
$
$
60008
Galley Service
3
EA
$
$

Unscheduled Work: Disposal Fees (Estimated Quantity)

60009
Disposal Fees For Scheduled Refuse Collection
400
TN
$
$
60010
Disposal Fees for Bulk Waste
200
TN
$
$
60011
Disposal Fees for Galley Service
3
TN
$
$
60012
Disposal Fees for Yard Waste
84
TN
$
$

OPTION YEAR SIX TOTAL (ALL WORK) $___________________

Option Year Seven - 1 October 2017 through 30 September 2018

CLIN
Schedule of Supplies/Services
Firm-Fixed Work: Refuse Collection
Qty
Unit
Unit Price
Total Price
70001
Nine/8-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$
70002
Two/6-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$
70003
One/4-cy Container as outlined in Section 2.4 of PWS
12
MO
$
$
70004
One/30-yd Cardboard Compactor as outlined in Section 2.4 of PWS
12
MO
$
$

Firm-Fixed Work: Recycling Collection

70005
Four/8-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$

Unscheduled Work: Refuse Collection (Estimated Quantity)

70006
One/30-yd Bulk Waste
72
EA
$
$
70007
One/20-yd Bulk Waste
6
EA
$
$
70008
Galley Service
3
EA
$
$

Unscheduled Work: Disposal Fees (Estimated Quantity)

70009
Disposal Fees For Scheduled Refuse Collection
400
TN
$
$
70010
Disposal Fees for Bulk Waste
200
TN
$
$
70011
Disposal Fees for Galley Service
3
TN
$
$
70012
Disposal Fees for Yard Waste
84
TN
$
$

OPTION YEAR SEVEN TOTAL (ALL WORK) $________________

Option Year Eight - 1 October 2018 through 30 September 2019

CLIN
Schedule of Supplies/Services
Firm-Fixed Work: Refuse Collection
Qty
Unit
Unit Price
Total Price
80001
Nine/8-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$
80002
Two/6-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$
80003
One/4-cy Container as outlined in Section 2.4 of PWS
12
MO
$
$
80004
One/30-yd Cardboard Compactor as outlined in Section 2.4 of PWS
12
MO
$
$

Firm-Fixed Work: Recycling Collection

80005
Four/8-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$

Unscheduled Work: Refuse Collection (Estimated Quantity)

80006
One/30-yd Bulk Waste
72
EA
$
$
80007
One/20-yd Bulk Waste
6
EA
$
$
80008
Galley Service
3
EA
$
$

Unscheduled Work: Disposal Fees (Estimated Quantity)

80009
Disposal Fees For Scheduled Refuse Collection
400
TN
$
$
80010
Disposal Fees for Bulk Waste
200
TN
$
$
80011
Disposal Fees for Galley Service
3
TN
$
$
80012
Disposal Fees for Yard Waste
84
TN
$
$

OPTION YEAR EIGHT TOTAL (ALL WORK) $___________________

Option Year Nine – 1 October 2019 through 30 September 2020

CLIN
Schedule of Supplies/Services
Firm-Fixed Work: Refuse Collection
Qty
Unit
Unit Price
Total Price
90001
Nine/8-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$
90002
Two/6-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$
90003
One/4-cy Container as outlined in Section 2.4 of PWS
12
MO
$
$
90004
One/30-yd Cardboard Compactor as outlined in Section 2.4 of PWS
12
MO
$
$

Firm-Fixed Work: Recycling Collection

90005
Four/8-cy Containers as outlined in Section 2.4 of PWS
12
MO
$
$

Unscheduled Work: Refuse Collection (Estimated Quantity)

90006
One/30-yd Bulk Waste
72
EA
$
$
90007
One/20-yd Bulk Waste
6
EA
$
$
90008
Galley Service
3
EA
$
$

Unscheduled Work: Disposal Fees (Estimated Quantity)

90009
Disposal Fees For Scheduled Refuse Collection
400
TN
$
$
90010
Disposal Fees for Bulk Waste
200
TN
$
$
90011
Disposal Fees for Galley Service
3
TN
$
$
90012
Disposal Fees for Yard Waste
84
TN
$
$

OPTION YEAR NINE TOTAL (ALL WORK) $___________________

TOTAL CONTRACT VALUE: BASE plus NINE Option Years (CLINS 00001 through 90012) Performance Work Statement (PWS) for Refuse Collection, Disposal, and Recycling Services at the U.S. Coast Guard Academy, New London Connecticut

1. INTRODUCTION. The contractor shall provide all personnel, equipment, tools, materials, vehicles, supervision, and other items and services necessary to perform refuse collection, disposal and recycling services at the U.S. Coast Guard Academy. The contractor shall perform to the standards in the contract as well as all local, state, and federal regulations.

2. BACKGROUND

2.1. The U. S. Coast Guard Academy is committed to strengthening the nation’s future by educating, training, developing and inspiring leaders of character who are ethically, intellectually, professionally and physically prepared to serve their country and humanity. In addition, these leaders of character are strong in their resolve to build on the long military and maritime heritage and proud accomplishments of the United States Coast Guard.

2.2 As an educational institution, the Academy houses cadets, military personnel and civilian employees year-round. Therefore, services performed shall be scheduled to minimize an adverse impact with the normal daily operations of the Academy. The regular scheduled working hours for the Academy are from 7:30 am to 4:00 pm Monday through Friday.

2.3 The table below contains the estimated workload factors:

Disclaimer: This is for information purposes only.
Item
Description
Estimated Tonnage
Estimated Volume
1
Annual Refuse Volume
400 tons per year
5500 cubic yards per year
2
Cardboard Recyclables
100 tons per year
No information is available for volume of cardboard
3
Single Stream Recyclables
55 tons per year
1100 cubic yards per year
4
Bulk Container (30 cu. yd)
200 tons per year
2300 cubic yards per year
5
Yard Waste
84 tons per year
720 cubic yards per year

2.4 The table below provides the tasks and the historical service frequency of this requirement:

Disclaimer: This is for information purpose only.

Location Description
Number of Containers
Size of Containers
Purpose of Container
Historical Service Frequency

Chase Hall, A Annex (south side) - see Note 1

8 cu yd

Refuse

3 times per week

Chase Hall, E Annex (north side) – see Note 1

Refuse

Child Development Center – see Note 2

6 cu yd

Refuse

Johnson Hall (southwest corner)

Refuse

Leamy Hall (north side)

Refuse

Munro Hall (south side)

6 cu yd

Refuse

Pine Hall (southwest corner)

Refuse

Shops Building (north side)

4 cu yd

Refuse

Chase Hall, B Annex (galley loading dock)

Single Stream Recycling

1 time per week

Chase Hall, E Annex (north side)

8 cu yd Single Stream Recycling

1 time per week

Johnson Hall (southwest corner)

Single Stream Recycling

1 time per week

Johnson Hall (southwest corner)

30 yd cardboard compactor

Cardboard Approximately 3 times per month

Johnson Hall and other locations as ordered – see Note 3

30 yd roll-off container
Refuse/bulk waste
Approximately 70 hauls per year

U-Lot Yard Waste holding area – see Note 4

30 yd roll-off container

Yard Waste Approximately 24 hauls per year

Galley Service

Not Applicable

Not Applicable
Refuse/Food Waste
See Section 5.2.2.2 below

Note 1 – The two 8 cubic yard containers on the south side of Chase Hall, A Annex are expected to be relocated to the north side of Chase Hall, E Annex in the Spring/Summer of 2010. This relocation is a result of an extensive renovation project to Chase Hall, A Annex which is expected to last for 1 to 1 ½ years. Upon completion of the project and as directed by the Contracting Officer’s Technical Representative (COTR), the contractor may be required to relocate containers back to the Chase Hall, A Annex location.

Note 2 – The Child Development Center is located outside the Academy perimeter fence on Farnsworth Street just north of the Academy.

Note 3 – Typically, one 30 yard roll-off container is stationed at the Johnson Hall site throughout the year. On occasion, additional 20 or 30 yard roll-off containers may be ordered by the COTR. The contractor shall deliver these containers to the Academy site as directed by the COTR. The COTR will contact the contractor when these containers are ready for pickup.

Note 4 – The U-Lot Yard Waste holding area is outside the Academy’s perimeter fence at the northeast corner of the Academy’s grounds.

2.5 Definitions

2.4.1 Refuse. Refuse includes both putrescible (subject to decomposition or rotting) and non-putrescible (solid waste, such as garbage, debris, and rubbish). Not included in this item are sewage and liquid industrial waste.

2.4.2 Yard Waste. This includes all items from the maintenance of grounds such as grass trimmings, tree trimmings, leaves and other items that can be composted.

2.4.3 Single Stream Recyclable Materials. Single stream recyclable materials consist of items that are reclaimable or have resale value and are not subject to property accountability. These items include white paper, newspaper, cardboard, bottles (plastic and glass), cans and other materials accepted by a licensed recycling processor.

2.4.4 Food Waste. This includes items from the preparation of food and remains. These remains are not always being ground or processed through waste disposal devices:

2.4.5 Bulk Waste. Bulk waste includes a variety of combustible and non-combustible material such as paper, boxes, glass, metal, plastics, grease, tin cans, and construction debris.

3. SCOPE. The objective of this effort is to acquire Refuse Collection, Disposal, and Recycling Services for all areas listed in the PWS. The service requirements and performance objectives relate directly to mission essential items as identified in the PWS, the Contractor Quality Control Plan and the Government Quality Assurance Plan providing for the highest level of service delivery performance critical to mission success.

4. APPLICABLE DOCUMENTS. The contractor shall comply with all Federal, State, local, environmental and hazardous laws and regulations and applicable instructions and directives pertaining to the services required herein and to the conduct and qualifications of personnel in performance of this contract. The contractor shall utilize safe products and equipment and qualified personnel to ensure the health and safety of all in compliance with the Environmental Protection Agency (EPA) and the Occupational and Safety Hazard Administration (OSHA).

5. TECHNICAL REQUIREMENTS

5.1 Weight Requirements: For all refuse, recyclable materials, yard waste, food waste and bulk waste, the contractor shall provide weight tickets to support net weight calculations for EVERY scheduled and unscheduled collection. Copies of weight tickets shall be furnished to the COTR as attachments to the monthly submission of Technical Exhibit 1, due on the 10th day of the following month.

5.2 Collection Requirements

5.2.1 Scheduled Collections: The contractor shall provide containers for refuse and recyclable materials, and make regular, scheduled collections from each of the containers. The contractor shall dispose of refuse and deliver recyclable material to recyclers for processing. The contractor shall separate the disposal fees from the hauling/service fee, based on measured tonnage. Proceeds from recycling sales will be retained by the contractor. The historical container quantities, sizes, locations and frequency of collections are shown in the Table under Section 2.4. The contractor shall establish a service schedule and submit this schedule for approval by the COTR and the Contracting Officer within 5 days after contract award. All collections shall be completed during Monday through Friday between the hours of 7:30 a.m. and 4:00 p.m. unless previously authorized by the COTR.

5.2.2 Unscheduled Collections: The contractor shall make any of the following unscheduled collections and disposals as requested by the COTR and respond to such requests within 1 workday of notification:

5.2.2.1 Bulk Waste Containers (roll off dumpsters): The contractor shall furnish and deliver one 30 cubic yard container (roll off dumpster) to be stationed near the southwest corner of Johnson Hall (see Table under Section 2.4). Periodically, the COTR will request the contractor to dispose of container’s bulk waste. The contractor shall replace the removed container on the same day. Periodically, the contractor shall deliver other roll-off containers to locations specified by the COTR, leave on site for a period of up to 30 days, and collect and dispose of bulk waste. The contractor shall separate the disposal fee from the hauling fee, based on measured tonnage.

5.2.2.2 Galley Service: Periodically, the contractor shall collect refuse from the Chase Galley and Officer’s Club Galley. The contractor shall collect and dispose of all refuse from these locations. The containers at the Chase Galley are Coast Guard owned and are 2 yard wheeled containers that can be dumped into a trash truck hopper at the existing loading dock. The containers at the Officer’s Club are Coast Guard owned and are 30-gallon cans that shall be manually dumped into a trash truck. The contractor shall separate the disposal fee from the hauling fee, based on measured tonnage.

5.2.2.3 Yard Waste Containers: Periodically, the contractor shall delivery the 30-yard roll off containers for collection and disposal of yard waste. The contractor shall deliver to the location requested, leave on site for a period of up to 30 days, collect and dispose of yard waste. The contractor shall separate the disposal fee from the hauling fee, based on measured tonnage.

5.2.3 Inclement Weather Schedule: The contractor shall carry out scheduled and required unscheduled refuse collection and recyclable material collection during periods of inclement weather. In cases of severe weather, the Contracting Officer may authorize exceptions. When exceptions are granted, the contractor shall make up all missed collections within 24 hours after the severe weather has ended, unless the Contracting Officer extends this 24 hour requirement. In the event of a hurricane warning and at no additional cost to the government, the contractor shall empty all containers within 24 hours of notification from the COTR

5.2.4 Route Parameters: Historical collection points for refuse and recyclable materials are shown in the Table under Section 2.4. The contractor shall position bulk containers for customer ease in depositing refuse. This may require repositioning of containers from time to time. The contractor shall also position containers to minimize interference with adjacent parking areas, sidewalks, roadways, and other potential obstructions.

5.2.5 Government Approved Containers: The contractor shall provide containers and recycling bins for the collection of refuse and recyclable material. The contractor shall fit all containers with working doors to allow easy access for putting waste in and to prohibit vermin from entering. All of the containers provided by the contractor shall be maintained in good condition, free from excessive dents and rust, and with a clean paint coating. Refuse containers shall be painted green and recyclable containers shall be painted blue. If additional re-painting is needed, the re-painting shall match the approved color scheme and be provided at no additional cost to the government.

5.2.6 Maintaining Containers and Collection Area: The contractor shall return all containers to their original location and in an upright position with the lids securely in place after services have been rendered. During services rendered, the contractor shall immediately clean up any spills, debris, and etc. During collection of refuse, the contractor shall pickup all refuse on the ground within ten feet of the containers. The contractor shall collect debris placed at the collection station, such as sacks, cartons, boxes, cans, tied bundles, or other containers. The contractor shall be responsible for keeping collection areas free of refuse and debris.

5.3 Recyclable Material

5.3.1 Recyclable Material Processing: With the exception of the cardboard compactor, the Academy utilizes a single stream recyclable system. The contractor shall provide all recycling bins as shown in Section 2.4. The contractor shall collect and transport all recyclable material to off base recycling center(s). The contractor shall retain the proceeds from the sale of any recyclable material. The contractor shall report all revenues from the sale of recyclable material in the monthly report, Technical Exhibit 1.

5.3.2 Marketing: To encourage recycling, which could reduce refuse tonnage; the contractor may provide marketing material to the Coast Guard Academy’s students and staff. Marketing materials may include handouts and HTML files that could be provided to the COTR to place them on the Academy’s intranet web page, or other approved media. Prior to distribution of any such marketing material, the Contracting Officer shall approve the marketing material.

5.4 Disposal: The contractor shall assume all rights and responsibilities for the transport and disposal of all solid wastes at a licensed off-base disposal site selected by the contractor. The contractor shall dispose of recyclable material at an off-base recyclable processing center. Disposal shall be in accordance with existing local, state, and federal regulations. The contractor shall be responsible for any permit or fees associated with the use of off-base disposal locations. The contractor shall provide the location of all disposal sites used to the COTR with the monthly report, Technical Exhibit 1. Fees for disposal will be paid based on established contract price per ton.

5.5 Report: The contractor shall provide a monthly report, using the form provided as Technical Exhibit 1, to the COTR by the 10th day of the following month detailing the following:

5.5.1 Scheduled Work

A.Refuse: Disposal location(s) to include name, city and state, and tonnage.
B.For each recycled material:
(1)Cardboard collected in the compactor– disposal location, to include name, city, and state, tonnage, and revenues or costs for processing of cardboard.
(2)Single Stream Recyclables collected in all other containers – disposal location, to include name, city, and state, and revenues or costs for processing of single stream recyclable material.

5.5.2. Unscheduled Work

A.Bulk Waste Refuse collected in 20 or 30 yard roll off containers – disposal location to include name, city and state and total monthly tonnage.
B.Galley Service – disposal location to include name, city and state, and tonnage.
C.Yard Wastes collected in 30 yard roll off containers – disposal location to include name, city and state, and tonnage.

6. DELIVERABLES: The contractor shall submit the following deliverables in the format, content, and schedule as outlined in the table below; and, via the following electronic media, MS Word, when applicable. The format shall be PC compatible and submitted on CD-ROM or via email.

Deliverables
Frequency
No. of Copies and to Whom
Date Required
Technical Plan
Updated as needed
Two Contracting Officer and COTR/Executive Officer
With Quote
Certificate of Insurance as required by FAR 52.228-5
Annually
One/Contracting Officer
With quote and on each anniversary date
Quality Control Plan as outlined in Section 8
As revised
Two/Contracting Officer/ COTR
Within 5 days after contract award
Collection Schedule as outlined in Section 5.2.1
As revised
Two/ Contracting Officer/ COTR
Within 5 days after contract award
Monthly Report outlined in Section 5.5
Monthly
COTR
No later than the 10th day of the following month
Contract Discrepancy Report
As needed
One/COTR
Within 5 days of receipt

7. PERSONNEL REQUIREMENTS

7.1 Management. The contractor shall manage the total work effort associated with the services required herein to assure fully adequate and timely completion of these services. Included in this function are management duties including, but not limited to, establishing and maintaining records and quality control. The Contractor shall provide an adequate staff of personnel with the necessary management expertise to assure the performance of the work in accordance with sound and efficient management practices. The Contractor or designated qualified personnel, shall effectively communicate with all Government and non-government personnel and shall have full authority to act for the Contractor on all contractual matters relating to the daily performance of the contract; and, to receive, accept and sign for any notices, inspection reports and all other correspondence on behalf of the Contractor from the COTR/Contracting Officer. This individual shall serve as the central point of contact for the Government and shall oversee the collection operations and monitor and ensure all work is performed in accordance with the PWS and shall maintain the work specification requirements, scheduling, inspections and safety standards. This individual shall be available at all times when the contract work is in progress, if needed and shall have the ability to respond to the site, when needed, to monitor work progress and for any other emergency, as required. The Contractor or designated qualified personnel shall return calls to the COTR within 1 hour of being contacted. This individual shall provide the COTR his/her cellular phone or a beeper to be reached during normal workday hours. This individual shall not be onsite.

7.2 Work Control. The contractor shall implement all necessary work control procedures to ensure timely accomplishment of work requirements, as well as to permit tracking of work in progress. The contractor shall plan and schedule work to assure labor and equipment are available to complete work requirements within the specified time limits and in conformance with the quality standards established herein.

7.3 Staffing. The contractor shall continuously maintain an adequate staff with suitable staffing management expertise to assure work is scheduled and completed in accordance with these specifications. The contractor shall maintain an adequate work force to complete work in accordance with time and quality standards specified.

8. CONTRACTOR QUALITY CONTROL (QC) REQUIREMENTS

8.1 A strong quality control program is essential in delivering quality products and services. The contractor shall develop a comprehensive program of inspections and monitoring actions. The first major step to ensuring a “self-correcting” contract is to ensure that the quality control program approved at the beginning of the contract provides the measures needed to lead the contractor to success. Once the quality control program is approved, careful application of the process and standards presented in the remainder of this document will ensure a robust quality assurance program.

8.2 Contractor QC Plan (QCP): The contractor shall develop and maintain a QCP delineating the contractor’s QC program/inspection system to monitor and control their performance of services, as required in accordance with Section 6.0, Deliverables, of the PWS. The Contractor shall ensure that the services required are performed in accordance with the PWS and established standards and in accordance with commonly accepted commercial practices. As a minimum, the QCP shall include timely and effective corrective action for all deficiencies identified by the Government.

8.3 The QC program/inspection system shall encompass all functions of the contract. The contractor shall develop and implement quality control procedures addressing the areas identified in the PWS herein and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The Contractor's management and the Coast Guard shall be informed of all issues affecting quality to include timely and effective corrective actions. The QC records shall, in part, consist of checklists of inspections and shall indicate the nature, frequency and number of observations made, the number and type of deficiencies found, and the nature of corrective action taken as appropriate.

8.4 QC Program/Inspection System. As a minimum, the contractor shall develop QC procedures addressing the areas identified in the Service Requirements Summary of the Government Quality Assurance Requirements. The inspection system shall include, but is not limited to, the following:

A.Introduction to the Quality Control System.
(1)A. Background and Rationale for the System
(2)Objectives in using Quality Control
(3)Successes with and updates for the System
B.Refuse and Recycling Collection and Disposal Services Quality Control Process
(1)Steps & Flow Diagram (includes a checklist used in inspecting contract performance during regularly scheduled/unscheduled inspections/testing; method of documenting and enforcing quality control operations)
(2)Inspection Procedure (to include checklists used by the contractor, identifying the items, frequency, conformance indicators and actions taken if nonconformance found, covering all the service requirements of this contract).
(3)Means of Identifying and Resolving Problems
(4)Roles and Responsibilities
C.Specific Quality Control Functions
(1)A plan that identifies all assignments (hours) for each pickup, and which falls within the time frame and days specified in the PWS.
(2)An annual schedule for all pickups by dates and areas for each piece of container.
(3)A system for identifying and correcting deficiencies in the quality of services before the level of performance becomes unacceptable and/or the Government inspectors point out the deficiencies.
(4)An inspection system covering all the service requirements of the contract. A checklist used in inspecting contract performance during regularly scheduled or unscheduled inspections. The name(s) of the individual(s) who will perform the inspection.
(5)A file of all inspections conducted by the contractor and the corrective action taken.
(6)Ordering, receipt, storage & retrieval of products, supplies and equipment.
(7)Sanitation & maintenance of the containers.
(8)Labor Practices (hiring, retention & rewards, and substitutions)
(9)Waste Management (including recycling)
(10)Security & Safety Compliance w/OSHA
(11)Compliance with EPA
D.Contingencies
(1)Emergency Situations - Procedures to be used; obtaining additional employees

9. GOVERNMENT QUALITY ASSURANCE REQUIREMENTS

9.1 Fundamental Government Responsibilities

The Contracting Officer Technical Representative (COTR) is responsible for representing the Contracting Officer for all facets of the services required. The COTR will carry out inspections, reviews and approvals, handle deficiencies, and ultimately accept on behalf of the Contracting Officer. The functions of the COTR are identified below. Government personnel, other than the Contracting Officer and the COTR, from time to time, may observe the contractor’s operations. However, these personnel may not interfere with contractor performance.

9.2 General Quality Assurance Functions

To facilitate the surveillance of the Contractor’s Quality Control Program by the Government, the COTR will verify contractor compliance with designated performance requirements contained in the Service Requirements Summary (SRS) herein. The COTR will review the critical requirements to assess their applicability and recommend the addition or deletion of requirements as conditions warrant. In addition for noncompliance and/or untimely corrective action to deficiencies of specific tasks, the contractor shall be subject to re-performance (at the company’s expense) and/or an inspection fee. With this intent, the surveillance approach may not be one that stays the same throughout the duration of the contract. The COTR will periodically update the surveillance approach when the need arises. The COTR will inspect the contractor’s QCP daily for compliance with requirements herein.

9.3 Specific Quality Assurance Functions

The COTR will establish an Inspection Schedule using the Quality Checklists from the Contractor’s QC Program. The COTR will perform the following Quality and Evaluative functions, which comprise the Government Quality Assurance Surveillance Plan (QASP):

A. Carry out periodic inspections using the Quality Checklists to evaluate the contractor’s performance to ensure contract services are received. The COTR will evaluate the contractor’s performance through intermittent on-site inspections of the contractor’s quality control program and receipt of complaints from base personnel. The COTR may inspect each task as completed or increase the number of quality control inspections if deemed appropriate because of related failures discovered during quality control inspections or because of repeated customer complaints. Likewise, the government may decrease the number of quality control inspections if performance dictates. The government will also receive and investigate complaints from various customers located on the installation. The contractor shall be responsible for initially validating customer complaints. However, the COTR shall make final determination of the validity of customer complaint(s) in cases of disagreement with customer(s).

B. Report findings resulting from these inspections to the Contractor and the Contracting Officer.

C. Perform monthly reviews of the contractor’s reports and records to ensure they adequately reflect the quantity of refuse disposed, material recycled by commodity and gross proceeds from the recyclables sales.

D. If discrepancies are discovered as a result of the periodic inspections, or any other means, use Contract Discrepancy Report (CDR) to communicate them to the contractor and follow up to ensure nonconformance are corrected (see Section 6, Deliverables). When a discrepancy exists, the contractor shall be required to complete Block 4 of a Contract Discrepancy Report. The Contracting Officer will evaluate the contractor’s explanation and determine the next course of action.

E. The COTR shall meet with the Contractor during the first month of the contract as needed. Thereafter, meetings will be scheduled as often as necessary. The Contractor and COTR shall sign the written minutes of these meetings, prepared by the COTR. Should the Contractor not concur with the minutes, the Contractor shall state any areas of non–concurrence in writing to the COTR within 5 calendar days of receipt of the signed minutes.

F. Perform Annual Performance Evaluation.

9.4 Service Requirements Summary (SRS)

The contractor Service Requirements are summarized into Performance Objectives that relate directly to mission essential items as identified in the PWS. These thresholds are critical to mission success.

Performance Objectives

Collect and Dispose of refuse and recyclable materials in accordance with the established schedule to ensure containers are emptied before overflow occurs.

Maintain equipment in good working condition and acceptable appearance.

All spillage removed, which is any refuse or recyclable dislodged from containers and/or solid waste collecting equipment in the course of collection and disposal; and, containers returned to original location, in an upright position with lids securely in place.

Correct missed pickups within 24 hours.

9.5 The above comprises the Government’s Quality Assurance Surveillance Plan (QASP), which has been developed to evaluate contractor actions and is designed to provide an effective surveillance method of monitoring contractor performance for each listed objective on the Service Requirements Summary (SRS) herein. The QASP provides a systematic method to evaluate the services the contractor is required to furnish. This QASP is based on the premise the government desires to maintain a quality standard for this service contract. The contractor, and not the government, is responsible for management and quality control actions to meet the terms of the contract. The role of the government is quality assurance to ensure contract standards are achieved.

FAR Clause 52.212-4 -- Contract Terms and Conditions -- Commercial Items (JUN 2010). Clause is incorporated in full text with tailoring as specified pursuant to FAR 12-302.

(a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights --

(1) Within a reasonable time after the defect was discovered or should have been discovered; and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

Paragraph (a), Inspection/Acceptance, is modified to add the following: Inspection under this contract will be accomplished by the Contracting Officer’s Technical Representative (COTR) in accordance with the contract requirements. The place of acceptance on the Government’s behalf for services or supplies furnished under this contract is as follows: Contracting Officer (PCB2), Shore Infrastructure Logistics Center, 300 East Main Street, Suite 965, Norfolk, VA 23510-9113.

(b) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C.3727). However, when a third party makes payment (e.g., use of the Government wide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract.

(c) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties.

(d) Disputes. This contract is subject to the Contract Disputes Act of 1978, as amended (41 U.S.C. 601-613). Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at FAR 52.233-1, Disputes, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract.

(e) Definitions. The clause at FAR 52.202-1, Definitions, is incorporated herein by reference.

(f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence such as, acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement of any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch, and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence.

(g) Invoice.

(1) The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include --

(i) Name and address of the Contractor;

(ii) Invoice date and number;

(iii) Contract number, contract line item number and, if applicable, the order number;

(iv) Description, quantity, unit of measure, unit price and extended price of the items delivered;

(v) Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading;

(vi) Terms of any discount for prompt payment offered;

(vii) Name and address of official to whom payment is to be sent;

(viii) Name, title, and phone number of person to notify in event of defective invoice; and

(ix) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract.

(x) Electronic funds transfer (EFT) banking information.

(A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract.

(B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer—Central Contractor Registration, or 52.232-34, Payment by Electronic Funds Transfer—Other Than Central Contractor Registration), or applicable agency procedures.

(C) EFT banking information is not required if the Government waived the requirement to pay by EFT.

(2) Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C. 3903) and Office of Management and Budget (OMB) prompt payment regulations at 5 CFR part 1315.

(h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings.

(i) Payment.

(1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract.

(2) Prompt Payment. The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C. 3903) and prompt payment regulations at 5 CFR Part 1315.

(3) Electronic Funds Transfer (EFT). If the Government makes payment by EFT, see 52.212-5(b) for the appropriate EFT clause.

(4) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date which appears on the payment check or the specified payment date if an electronic funds transfer payment is made.

(5) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall—

(i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the—

(A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment);

(B) Affected contract number and delivery order number, if applicable;

(C) Affected contract line item or subline item, if applicable; and

(D) Contractor point of contact.

(ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer.

(6) Interest.

(i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in Section 611 of the Contract Disputes Act of 1978 (Public Law 95-563), which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period at fixed by the Secretary until the amount is paid.

(ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract.

(iii) Final decisions. The Contracting Officer will issue a final decision as required by 33.211 if—

(A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days;

(B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or

(C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see 32.607-2).

(iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment.

(v) Amounts shall be due at the earliest of the following dates:

(A) The date fixed under this contract.

(B) The date of the first written demand for payment, including any demand for payment resulting from a default termination.

(vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on—

(A) The date on which the designated office receives payment from the Contractor;

(B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld…

This is the start of the file's text. The full file is on GovTribe.

Other files

File Type Posted
Questions and Responses to RFQ HSCG84-10-Q-AA1355.docx DOCX document
Attachment —
Attachment —
Attachment —
Attachment —
Attachment —
Attachment Number —

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

File details come from the government source that posted it. Updated .