Attachment_B_-_Statement_of_Work.docx

REVISION No. 1 . CHANGE NO. .

SPECIFICATION FOR PURCHASE OF

AMERICAN HONDA MOTOR CO.

ENGINE PARTS AND ACCESSORIES

ATTACHMENT B – STATEMENT OF WORK

ORGINATED BY James M. Taylor DATE 01-27-2017

COMMAND / DIVISION SMALL BOAT PRODUCT LINE (SBPL)

DEPARTMENT / DIVISION SUPPLY

INTERNAL REVIEWER ___________________ DATE _____

SOWRB APPROVAL __ DATE _______

AMERICAN HONDA MOTOR CO. ENGINE PARTS AND ACCESSORIES PURCHASE SPECIFICATION

1.0. SCOPE

This specification defines the requirements for the purchase of various engine parts and accessories supporting several platforms in the Coast Guard fleet. The following is a list of engine parts and accessories required under this contract for purchasing through executed delivery orders using American Honda Motor Co. and/or their authorized distributors. All of the engine parts and accessories are proprietary to American Honda Motor Co. The amount and required delivery date shall be established through the Contract.

USCG SMALL BOAT FLEET

2.0. APPLICABLE DOCUMENTS

2.1. General - The documents listed in this section are referenced in section 3 and 4 of this specification. This section does not include documents sited in other sections of this specification, which are recommended for additional information or used as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements cited in section 3 and 4 of this specification, whether or not the referenced documents are listed here.

2.2. Industry Publications - The following documents of the issues specified form a part of this specification to the extent referenced herein. Suffixes denoting the specific issue of each document will be omitted from the future references to the document in this specification.

Organization Specification No. Title

(ASTM)

2) Military Standards MIL-STD-129P Standard Practice for Military Markings

3) USCG Engineering D-000-100 USCG Bar Coding Logistics Center Specification for Bar Coding

2.3. Specification and Order of Precedence - In the event of a conflict between the text of this specification and the references cited herein, the text of this specification takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

3.0. REQUIREMENTS

3.1. Design

3.1.1 Design, Dimensions and Dimensional Tolerances – All items shall conform to Original Equipment Manufacturer (OEM) design, dimensions and tolerances.

3.2. MARKING

3.2.1. Identification Marking- For tracking purposes, each item shall be identified by identification marking. The marking shall be stamped, engraved, or otherwise permanently affixed to each item and must contain at least the following:

STOCK NUMBER:

ITEM NAME:

PART NUMBER:

COAST GUARD SFLC MATERIAL

4.0. BAR CODING

4.1 The National Stock Number (NSN) shall also be bar coded in addition to the markings required above. Bar coded labels shall be in accordance with SFLC specification D-000-0100 Rev. G. The Bar Code Label can be applied separately or as part of the marking required in 5.4 of this specification.

a. The actual labels shall be Type "V", Grade "C", Style "2", Composition "a".

b. Each label shall contain encoded data for the National Stock Number.

4.2 Each item is to individually packaged in accordance with ASTM D 391 “Standard Practice for Commercial Packaging”. Individually mark each unit in accordance with MIL-STD-129. Bar coding is required and will be in accordance with ANSI/AIM BC1.

4.1. PERIOD OF PERFORMANCE

The Period of Performance for this contract is May 1, 2017 through June 30, 2017.

Period of Performance May 1, 2017 through June 30, 2017

Note: The above dates are estimated; actual dates will be determined at contract award.

4.2. PLACE OF DELIVERY

The Place of Delivery for all orders (unless otherwise noted), is indicated below:

Surface Forces Logistics Center (SFLC) 2401 Hawkins Point Road Curtis Bay Baltimore, MD 21226

Some items may require direct delivery to a specified unit, in various locations in the United States.

5.0. GOVERNMENT TERMS & DEFINITION

5.1 ACONYMS

6.0. GOVERNMENT ACCEPTANCE

6.1 Government Acceptance – all items will be delivered to the above address, stated in section 4.2, for inspection. Warehouse personnel will inspect material for proper packaging and marking and accept as applicable.

6.2 Deliverables - All delivery requests shall be delivered to the delivery address listed on the purchase order 60 days after receipt of the purchase order..

7.0. QUALITY ASSURANCE

7.1 Quality Assurance is not required at this time. The Coast Guard reserves the right to perform Quality Assurance, if and when required.

8.0. CONTRACT ADMINISTRATION

8.1 This contract is administered by Allen A. Tillman II, Contracting Officer (KO). Contact information:

Surface Forces Logistics Center (SFLC) 2401 Hawkins Point Road Curtis Bay Baltimore, MD 21226

Telephone (410) 762-6472