The file's text, extracted by GovTribe without its formatting.
ADDENDUM TO STANDARD FORM (SF) 1449 ( BLOCKS 19 – 24
SCHEDULE OF SUPPLIES/SERVICES
PROPULSION SHAFT (NSN: 2010-01-445-7940)
*Note: The hourly rate shall include direct and indirect labor rates, G&A and profit. The estimated number of hours and total cost shown below are intended for evaluation purposes only and may vary based upon the condition of the components as received by Contractor.
SUPPLIES/SERVICES AND PRICES/COSTS FOR:
BASE YEAR (01 April 2017 – 31 March 2018)
| ITEM |
| DESCRIPTION |
| HOURLY LABOR RATE |
(multiply estimated labor hours x hourly rate) = Unit Price
| UNIT PRICE |
| EST QTY |
| BASE YEAR EXTENDED PRICE |
| CLIN 0001 |
| Manufacture new propulsion shafts which include material certifications, keys, new shipping container, QA inspection, PP&M and shipping to Baltimore, MD in accordance with specification P-243-0618, section 3.1. |
| Job |
| $ |
| 10 EA |
| $ |
| CLIN 0002 |
| For Approval, Certifications of material conformance. |
| Job |
| $ NSP |
| 10 EA |
| $ NSP |
| CLIN 0003 |
| For Approval, Condition Found Report, Inspection, and Cost Estimate for shaft and shipping crate repair in accordance with specification P-243-0618 section 3.2. |
| Job |
| $ |
| 25 EA |
| $ |
| CLIN 0004 |
| Cost to package, pack, mark and deliver to Baltimore, MD any shaft not being repaired in accordance with specification P-243-0618 section 3.2.2. |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 0005 |
| (Optional) Cost - Weld Repairs: General (non-bearing areas) - 3 cubic inch increment (based on 1/8" deep areas to repair, 1" length, 360° undercut as required by MILSPEC). |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 0006 |
| (Optional) Cost - Weld Repairs: Aft bearing repair (entire area) - 18 cubic inch increment (based on 1/16" deep area to repair, full bearing length, 360° around). |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 0007 |
| (Optional) Cost - Weld Repairs: Intermediate bearing repair (entire area) - 12 cubic inch increment (based on 1/16" deep area to repair, full bearing length, 360° around). |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 0008 |
| (Optional) Cold Straightening: Cost estimate (CFR) to cold straighten shafts as necessary in accordance with specification P-243-0618. |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 0009 |
| Cost to blue fit, package, pack, mark, bar-code and ship to Baltimore, MD refurbished propulsion shafts in accordance with specification P-243-0618. |
| Job |
| $ |
| 25 EA |
| $ |
| CLIN 0010 |
| (Optional) Cost to manufacture (1) propeller end and (1) coupling end key per specification P-243-0618. |
| Job |
| $ |
| 25 EA |
| $ |
| CLIN 0011 |
| For Approval, Final inspection and test report for each manufactured or repaired propulsion shaft in accordance with specification P-243-0618. |
| Job |
| $ NSP |
| 35 EA |
| $ NSP |
| CLIN 0012 |
| (Optional) Cost to manufacture a new shipping crate as required in accordance with specification P-243-0618 section 5.1. |
| Job |
| $ |
| 1 EA |
| $ |
SUPPLIES/SERVICES AND PRICES/COSTS FOR:
FIRST OPTION YEAR (01 April 2018 – 31 March 2019)
| ITEM |
| DESCRIPTION |
| HOURLY LABOR RATE |
(multiply estimated labor hours x hourly rate) = Unit Price
| UNIT PRICE |
| EST QTY |
| FIRST OPTION YEAR EXTENDED PRICE |
| CLIN 1001 |
| Manufacture new propulsion shafts which include material certifications, keys, new shipping container, QA inspection, PP&M and shipping to Baltimore, MD in accordance with specification P-243-0618, section 3.1. |
| Job |
| $ |
| 10 EA |
| $ |
| CLIN 1002 |
| For Approval, Certifications of material conformance. |
| Job |
| $ NSP |
| 10 EA |
| $ NSP |
| CLIN 1003 |
| For Approval, Condition Found Report, Inspection, and Cost Estimate for shaft and shipping crate repair in accordance with specification P-243-0618 section 3.2. |
| Job |
| $ |
| 10 EA |
| $ |
| CLIN 1004 |
| Cost to package, pack, mark and deliver to Baltimore, MD any shaft not being repaired in accordance with specification P-243-0618 section 3.2.2. |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 1005 |
| (Optional) Cost - Weld Repairs: General (non-bearing areas) - 3 cubic inch increment (based on 1/8" deep areas to repair, 1" length, 360° undercut as required by MILSPEC). |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 1006 |
| (Optional) Cost - Weld Repairs: Aft bearing repair (entire area) - 18 cubic inch increment (based on 1/16" deep area to repair, full bearing length, 360° around). |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 1007 |
| (Optional) Cost - Weld Repairs: Intermediate bearing repair (entire area) - 12 cubic inch increment (based on 1/16" deep area to repair, full bearing length, 360° around). |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 1008 |
| (Optional) Cold Straightening: Cost estimate (CFR) to cold straighten shafts as necessary in accordance with specification P-243-0618. |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 1009 |
| Cost to blue fit, package, pack, mark, bar-code and ship to Baltimore, MD refurbished propulsion shafts in accordance with specification P-243-0618. |
| Job |
| $ |
| 25 EA |
| $ |
| CLIN 1010 |
| (Optional) Cost to manufacture (1) propeller end and (1) coupling end key per specification P-243-0618. |
| Job |
| $ |
| 25 EA |
| $ |
| CLIN 1011 |
| For Approval, Final inspection and test report for each manufactured or repaired propulsion shaft in accordance with specification P-243-0618. |
| Job |
| $ NSP |
| 35 EA |
| $ NSP |
| CLIN 1012 |
| (Optional) Cost to manufacture a new shipping crate as required in accordance with specification P-243-0618 section 5.1. |
| Job |
| $ |
| 1 EA |
| $ |
SUPPLIES/SERVICES AND PRICES/COSTS FOR:
SECOND OPTION YEAR (01 April 2019 – 31 March 2020)
| ITEM |
| DESCRIPTION |
| HOURLY LABOR RATE |
(multiply estimated labor hours x hourly rate) = Unit Price
| UNIT PRICE |
| EST QTY |
| SECOND OPTION YEAR EXTENDED PRICE |
| CLIN 2001 |
| Manufacture new propulsion shafts which include material certifications, keys, new shipping container, QA inspection, PP&M and shipping to Baltimore, MD in accordance with specification P-243-0618, section 3.1. |
| Job |
| $ |
| 10 EA |
| $ |
| CLIN 2002 |
| For Approval, Certifications of material conformance. |
| Job |
| $ NSP |
| 10 EA |
| $ NSP |
| CLIN 2003 |
| For Approval, Condition Found Report, Inspection, and Cost Estimate for shaft and shipping crate repair in accordance with specification P-243-0618 section 3.2. |
| Job |
| $ |
| 10 EA |
| $ |
| CLIN 2004 |
| Cost to package, pack, mark and deliver to Baltimore, MD any shaft not being repaired in accordance with specification P-243-0618 section 3.2.2. |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 2005 |
| (Optional) Cost - Weld Repairs: General (non-bearing areas) - 3 cubic inch increment (based on 1/8" deep areas to repair, 1" length, 360° undercut as required by MILSPEC). |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 2006 |
| (Optional) Cost - Weld Repairs: Aft bearing repair (entire area) - 18 cubic inch increment (based on 1/16" deep area to repair, full bearing length, 360° around). |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 2007 |
| (Optional) Cost - Weld Repairs: Intermediate bearing repair (entire area) - 12 cubic inch increment (based on 1/16" deep area to repair, full bearing length, 360° around). |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 2008 |
| (Optional) Cold Straightening: Cost estimate (CFR) to cold straighten shafts as necessary in accordance with specification P-243-0618. |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 2009 |
| Cost to blue fit, package, pack, mark, bar-code and ship to Baltimore, MD refurbished propulsion shafts in accordance with specification P-243-0618. |
| Job |
| $ |
| 25 EA |
| $ |
| CLIN 2010 |
| (Optional) Cost to manufacture (1) propeller end and (1) coupling end key per specification P-243-0618. |
| Job |
| $ |
| 25 EA |
| $ |
| CLIN 2011 |
| For Approval, Final inspection and test report for each manufactured or repaired propulsion shaft in accordance with specification P-243-0618. |
| Job |
| $ NSP |
| 35 EA |
| $ NSP |
| CLIN 2012 |
| (Optional) Cost to manufacture a new shipping crate as required in accordance with specification P-243-0618 section 5.1. |
| Job |
| $ |
| 1 EA |
| $ |
SUPPLIES/SERVICES AND PRICES/COSTS FOR:
THIRD OPTION YEAR (01 April 2020 – 31 March 2021)
| ITEM |
| DESCRIPTION |
| HOURLY LABOR RATE |
(multiply estimated labor hours x hourly rate) = Unit Price
| UNIT PRICE |
| EST QTY |
| THIRD OPTION YEAR EXTENDED PRICE |
| CLIN 3001 |
| Manufacture new propulsion shafts which include material certifications, keys, new shipping container, QA inspection, PP&M and shipping to Baltimore, MD in accordance with specification P-243-0618, section 3.1. |
| Job |
| $ |
| 10 EA |
| $ |
| CLIN 3002 |
| For Approval, Certifications of material conformance. |
| Job |
| $ NSP |
| 10 EA |
| $ NSP |
| CLIN 3003 |
| For Approval, Condition Found Report, Inspection, and Cost Estimate for shaft and shipping crate repair in accordance with specification P-243-0618 section 3.2. |
| Job |
| $ |
| 10 EA |
| $ |
| CLIN 3004 |
| Cost to package, pack, mark and deliver to Baltimore, MD any shaft not being repaired in accordance with specification P-243-0618 section 3.2.2. |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 3005 |
| (Optional) Cost - Weld Repairs: General (non-bearing areas) - 3 cubic inch increment (based on 1/8" deep areas to repair, 1" length, 360° undercut as required by MILSPEC). |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 3006 |
| (Optional) Cost - Weld Repairs: Aft bearing repair (entire area) - 18 cubic inch increment (based on 1/16" deep area to repair, full bearing length, 360° around). |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 3007 |
| (Optional) Cost - Weld Repairs: Intermediate bearing repair (entire area) - 12 cubic inch increment (based on 1/16" deep area to repair, full bearing length, 360° around). |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 3008 |
| (Optional) Cold Straightening: Cost estimate (CFR) to cold straighten shafts as necessary in accordance with specification P-243-0618. |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 3009 |
| Cost to blue fit, package, pack, mark, bar-code and ship to Baltimore, MD refurbished propulsion shafts in accordance with specification P-243-0618. |
| Job |
| $ |
| 25 EA |
| $ |
| CLIN 3010 |
| (Optional) Cost to manufacture (1) propeller end and (1) coupling end key per specification P-243-0618. |
| Job |
| $ |
| 25 EA |
| $ |
| CLIN 3011 |
| For Approval, Final inspection and test report for each manufactured or repaired propulsion shaft in accordance with specification P-243-0618. |
| Job |
| $ NSP |
| 35 EA |
| $ NSP |
| CLIN 3012 |
| (Optional) Cost to manufacture a new shipping crate as required in accordance with specification P-243-0618 section 5.1. |
| Job |
| $ |
| 1 EA |
| $ |
SUPPLIES/SERVICES AND PRICES/COSTS FOR:
FOURTH OPTION YEAR (01 April 2021 – 31 March 2022)
| ITEM |
| DESCRIPTION |
| HOURLY LABOR RATE |
(multiply estimated labor hours x hourly rate) = Unit Price
| UNIT PRICE |
| EST QTY |
| FOURTH OPTION YEAR EXTENDED PRICE |
| CLIN 4001 |
| Manufacture new propulsion shafts which include material certifications, keys, new shipping container, QA inspection, PP&M and shipping to Baltimore, MD in accordance with specification P-243-0618, section 3.1. |
| Job |
| $ |
| 10 EA |
| $ |
| CLIN 4002 |
| For Approval, Certifications of material conformance. |
| Job |
| $ NSP |
| 10 EA |
| $ NSP |
| CLIN 4003 |
| For Approval, Condition Found Report, Inspection, and Cost Estimate for shaft and shipping crate repair in accordance with specification P-243-0618 section 3.2. |
| Job |
| $ |
| 10 EA |
| $ |
| CLIN 4004 |
| Cost to package, pack, mark and deliver to Baltimore, MD any shaft not being repaired in accordance with specification P-243-0618 section 3.2.2. |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 4005 |
| (Optional) Cost - Weld Repairs: General (non-bearing areas) - 3 cubic inch increment (based on 1/8" deep areas to repair, 1" length, 360° undercut as required by MILSPEC). |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 4006 |
| (Optional) Cost - Weld Repairs: Aft bearing repair (entire area) - 18 cubic inch increment (based on 1/16" deep area to repair, full bearing length, 360° around). |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 4007 |
| (Optional) Cost - Weld Repairs: Intermediate bearing repair (entire area) - 12 cubic inch increment (based on 1/16" deep area to repair, full bearing length, 360° around). |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 4008 |
| (Optional) Cold Straightening: Cost estimate (CFR) to cold straighten shafts as necessary in accordance with specification P-243-0618. |
| Job |
| $ |
| 1 EA |
| $ |
| CLIN 4009 |
| Cost to blue fit, package, pack, mark, bar-code and ship to Baltimore, MD refurbished propulsion shafts in accordance with specification P-243-0618. |
| Job |
| $ |
| 25 EA |
| $ |
| CLIN 4010 |
| (Optional) Cost to manufacture (1) propeller end and (1) coupling end key per specification P-243-0618. |
| Job |
| $ |
| 25 EA |
| $ |
| CLIN 4011 |
| For Approval, Final inspection and test report for each manufactured or repaired propulsion shaft in accordance with specification P-243-0618. |
| Job |
| $ NSP |
| 35 EA |
| $ NSP |
| CLIN 4012 |
| (Optional) Cost to manufacture a new shipping crate as required in accordance with specification P-243-0618 section 5.1. |
| Job |
| $ |
| 1 EA |
| $ |
