Amendment0001.pdf

1. CONTRACT ID CODE PAGE OF PAGES

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1 2

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

0001 28SEP2015 2116406P30002

6. ISSUED BY CODE HSCG40 7. ADMINISTERED BY (If other than Item 6) CODE

COMMANDER, USCG

SURFACE FORCES LOGISTICS CENTER

1301 CLAY STREET, SUITE 807N

OAKLAND, CA 94612

8. NAME AND ADRESS OF CONTRACTOR (no., street, county, State and ZIP Code) 9.A AMENDMENT OF SOLICITATION NO.

X HSCG40-16-Q-P30002

9B. DATE (SEE ITEM 11)

11SEP2015

10A. MODIFICATION OF CONTRACT/ORDER

NO.

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended. Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods: (a) By completing Items 8 and 15, and returning 2 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the Offer submitted: or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEGEMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE

RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT/.ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc)

SET FORTH IN ITEM 14, PURSUANT TO AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority).

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

DRY-DOCKING AND REPAIR: RB-M 45667, STATION SAN FRANCISCO

SEE PAGE 2

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

BY

(Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070 30-105 STANDARD FORM 30 (REV. 10-83)PREVIOUS

EDITION UNUSABLE Prescribed by GSA, FAR (48 CFR) 53.243

HSCG40-16-Q-P30002

DRY-DOCKING & REPAIR

RB-M 45667, Sta. San Francisco Amendment 0001

The purpose of this amendment is as follows:

1.) The following Request for Clarification are answered:

WORK ITEM O-16 MARINE CHEMIST SERVICES, PROVIDE

QUESTION: This work item is listed as Optional. This is typically a requirement.

o ANSWER: This specification does not require any welding. However, if weld repairs are required during this availability, this Option item will be activated as needed.

WORK ITEM D-4 TANKS (MP FUEL SERVICE), CLEAN AND INSPECT

QUESTION: Under tank closing it states to renew Nitrile channel gasket. Is this GFM?

o ANSWER: Nitrile channel gasket shall be provided by the contractor.

WORK ITEM O-9 ELECTRICAL ISOLATION, PERFORM

QUESTION: P3.5 mentions we are to conduct welding repairs in Work Item # _____.

What work item number is this referring to?

o ANSWER: This specification does not require any welding, therefore the Work Item # is left blank. If any welding is required during this availability, this Option item will be activated as needed.

WORK ITEM D-12 SEA STRAINERS – DUPLEX (ALL SIZES), OVERHAUL

QUESTION: Could you please elaborate on the Cofferdam protection? We are unfamiliar with this process. The specs are requiring a certified diver. Why do we need a diver if the vessel will be out of the water? Does this need to occur while the vessel is still in the water?

o ANSWER: This work item specification is standard for cutters on floating drydocks in the water. For vessels blocked out of the water cofferdams are not needed. Contract shall have at a minimum single gasket and blank flange.

2.) All other terms and conditions cited in the original solicitation/specifications remain unchanged.