A00001__(cont'd)_HSCG40-15-Q-P30009.pdf

HSCG40-15-Q-P30009

Amendment Number A00001

14A. This Amendment is issued to answer the following questions submitted in response to this solicitation:

QUESTION: Work item 2 describes the method for performing the stated “Hull

Plating (U/W) Inspection which is understood, however, the SOSS, states that D-2 1 job and 2A,2B,2C,2D, optional as 1 job ea. My understanding is there is only ONE inspection of the hull. How should contractor price out for Condition A, B, C, D? In my opinion D2 is the same as O-2D. How should this be priced?

ANSWER: There are two separate inspections as shown in the intent of the Work item

U/W Hull including appendages and coating system. 3.2 shows the requirement for the hull plating inspection. 3.2.7 shows the requirement for the coating system inspection.

KTR would price out what condition the coating system meets from their inspections.

Definitions for each paint condition are listed in section 4 under notes and definitions.

QUESTION: Work Item 32 Drydocking , para 3.3.1 states “using loading condition specified in paragraph 3.2.1. I don’t find 3.2.1. I presume that to be information in paragraph 3.3. Can you confirm the info to be used is what is provided in para 3.3?

And 3.3.2 does not address blocking position. What blocking position is the vessel to be configured for?

ANSWER: Loading conditions are listed in 3.3. Use blocking position 2.

QUESTION: Which paint preservation guideline is to be utilized on this 49426 availability? The Specifications and the CD of drawings and publications contains both the 2012 Std Spec 6310 and the COMDTINST M10360.3D January 2014 Color Coating

Manual.

ANSWER: They use both, Std Spec 6310 instructs the application process and Color

Coating Manual gives the paint colors with part numbers for paint.

QUESTION: Work Item 17 Sea Valves has two para 3.2’s; I presume the first one is correct as there are GFP valves listed in the specification. Please advise.

ANSWER: Yes, it is the 3.2 with the GFP valves listed in table 1.

HSCG40-15-Q-P30009

Amendment Number A00001

QUESTION: Please advise quantity of UT shots para 3.2.

ANSWER: 100 UT shots.

QUESTION: WI-5 Accessible Space: Is the intent to gut out each space to accomplish the inspection? Please clarify extent.

ANSWER: Yes, it is the intent to go each space listed and inspect.

QUESTION: WI-6 Tanks FUEL: two paragraphs 3.1.4.2; please pick one. Notes 4.4

Y/N ? depending on which para chosen.

ANSWER: 3.1.4.2 Dispose of removed fluids. Notes: CG Inspector will inspect tank immediately prior to closing. W/I 19 is for the KTR to refuel.

QUESTION: WI-16 Fuel Valves, in Table 1 the first valve type “Ball, firesafe” just got word for the Swagelok factory that the lead time is 12 weeks from receipt of order.

Something to do with it being a special order valve and actuator. Do you have any GFP for these 2 ball firesafe valves? The other 4 items are couple weeks out.

ANSWER: If the valves are not listed as GFP we do not supply them as GFP.

QUESTION: When reviewing the spec and pricing sheet, CLIN General Welding 3.3 states four levels of pricing. How do we price it on the Schedule of Supplies and Services as a Definite Item, 1 Job?

ANSWER: As a result of this question, the specification has been changed and section

3.3 for bidding has been removed in its entirety.

14B. As a result of this information, Revision 1 to the Specification is incorporated into this solicitation.

14C. The date and time established for receipt of proposals remains November 5, 2014 at 12:00 PM EST.

ALL OTHER TERMS AND CONDITIONS REMAIN UNCHANGED

(END OF AMENDMENT NUMBER A00001)