Additional info KIT HAT COMBINATION MENS.docx

2 Feb 2010

KIT, HAT, COMBINATION, MEN'S

ADDITIONAL INFORMATION FOR MIL-C-24937:

PATTERN DATE: 14 DECEMBER 2004

SAMPLE INFORMATION

BASIC FABRIC FOR COVER, POLYESTER/COTTON TWILL,

WHITE 3053 MADE IN ACCORDANCE WITH MIL-C-24927

IS AVAILABLE AND APPLICABLE FOR SHADE, COLOR,

AND COLORFASTNESS; AND IS IDENTIFIED AS ROLL

NO. 89307. A STANDARD SAMPLE FOR CLOTH,

POLY/WOOL SERGE, BLUE SHADE 3362 IS AVAILABLE ON

ROLL NO. 80353, FOR SHADE AND COLORFASTNESS OF

HAT FRAME.

INTERIM SPECIFICATION CHANGES TO MIL-C-24937:

PAGE 1, PARA. 1.2.1 CAP FRAME: DELETE IN ITS

ENTIRETY AND REPLACE WITH:"1.2.1 CAP FRAME SHALL

BE PROCURED WITH A BLACK POROMERIC,CHIN STRAP

(ENLISTED) OR A WOVEN GOLD LACE CHIN STRAP

(OFFICERS). EACH FRAME SHALL HAVE

A FRONT STAND WITH REMOVABLE CROWN

SUPPORT WIRE IN THE FOLLOWING CLASSES, AND

SIZES AS SPECIFIED (SEE 6.2)".

"CLASS 1-FOR FLAG RANK OFFICERS WITH 2

GOLD BUTTON AND HIGH GLOSS BLACK

POROMERIC VISOR

CLASS 2-FOR CAPTAINS AND COMMANDERS WITH 2 GOLD

BUTTONS AND A CLOTH VISOR"

PAGE 2, LINES 1 AND 2 DELETE "TYPE II FRAME

WITH HIGH GLOSS BLACK POROMERIC VISOR WITH 2

GOLD BUTTONS AND A CLOTH VISOR"

PAGE 2-3, PARA.2.1.1, UNDER SPECIFICATIONS

DELETE "UU-P-31 PAPER, GENERAL SPECIFICATION

AND METHODS FOR TESTING"

DELETE "MIL-STD-147 PALLITIZED UNIT LOAD."

DELETE "PPP-B-566 BOXES, FOLDING, PAPERBOARD"

DELETE "PPP-B-636 BOX, SHIPPING, FIBERBOARD"

DELETE "CCC-C-700" REPLACE WITH

"A-A-59517 CLOTH, COATED, VINYL COATED",

DELETE "DDD-L-20" REPLACE WITH

"MIL-DTL-32075 LABEL: CLOTHING, EQUIPAGE,

AND TENTAGE"

DELETE "MIL-C-16290" REPLACE WITH

"A-A-55198 CLOTH, MELTON, WOOL (MOTH PROOF)"

DELETE "MIL-P-55010" REPLACE WITH

"A-A-56021 PLASTIC SHEET, POLYETHYLENE

TEREPHTHALATE"

DELETE "FED-STD-151" REPLACE WITH

"ASTM-E-498 METHODS OF TESTING METAL"

DELETE "FED-STD-751" REPLACE WITH

"ASTM-D6193 STITCHES, SEAMS AND STITCHINGS"

PAGE 4-5, BELOW "THE AMERICAN ASSOCIATION OF

TEXTILE CHEMISTS AND COLORISTS"

INSERT TEST METHODS AS FOLLOWS:

"AATCC-8 COLORFASTNESS TO CROCKING

AATCC-15 COLORFASTNESS TO PERSPIRATION

AATCC-16 COLORFASTNESS TO LIGHT

AATCC-61 TEST 1A, COLORFASTNESS TO

LAUNDERING, HOME AND COMMERICAL ACCELERATED

AATCC-107, COLORFASTNESS TO WATER

(REQUEST FOR COPIES SHOULD BE ADDRESSED TO THE

AATCC, PO BOX 12215, RESEARCH TRIANGLE PARK,

NC 27709)"

PAGE 5, PARA. 2.2, UNDER "AMERICAN SOCIETY FOR

TESTING AND MATERIALS" TEST METHODS AS

FOLLOWS:

"ASTM-D3776 MASS PER UNIT AREA (WEIGHT)

ASTM-D1777 THICKNESS OF TEXTILE MATERIALS

ASTM-D638 TENSILE PROPERTIES OF PLASTICS

ASTM-D751 TEST METHODS FOR COATED FABRICS

ASTM-D2288 WEIGHT LOSS OF PLASTICS.

ASTM-E498 STANDARD SOURCE METALS COLLECTION

ASTM-D6193 STANDARD PRACTICE FOR STITCHES

AND SEAMS"

DELETE" APPLICATIONS...PHILADELPHIS, PA 19103-

1187" SUBSTITUTE

(APPLICATION FOR COPIES SHOULD BE

ADDRESSED TO ASTM, INTL, PO BOX 3700, 100 BARR

HARBOR DRIVE, WEST CONSHOHOCKEN, PA 19428)"

TAPPI

THICKNESS (CALIPHER) OF PAPER, PAPERBOARD

AND COMBINED BOARD, TEST METHOD T 411 OM-05.

GRAMMAGE OF PAPER AND PAPERBOARD (WEIGHT

PER UNIT AREA), TEST METHOD T410 OM-02.

(APPLICATION FOR COPIES SHOULD BE ADDRESSED

TO TAPPI, 15 TECHNOLOGY PARKWAY SOUTH,

NOCROSS, GA 30092).

PAGE 5, PARA. 3.3.1.1.1, LINE 2, DEELETE "TYPE 1

CLASS 2" SUBSTITUTE "CLASS 1".

PAGE 6, PARA. 3.3.1.1.2, LINE 1, DELETE

"TYPE II" REPLACE WITH "CLASS 2". LINE 3,

DELETE "PORAMERIC MATERIAL, 0.045(+/-0.003)" AND

REPLACE WITH "POROMERIC MATERIAL,0.060

(+/-0.005)" ADD:"AS AN ALTERNATE, THE

CHIN STRAP SHALL BE AN EXTRUDED VINYL MATCHING

THE COLOR AND GLOSS OF THE VISOR."

PAGE 6, PARA., 3.3.1.1.3, LINE 3, DELETE "TYPE

1" REPLACE WITH "CLASS 1".

PAGE 6, PARA. 3.3.1.1.4, LINE 3, DELETE

"TYPE II" SUBSTITUTE "CLASS 2".

PAGE 6, PARA. 3.3.1.1.5, LINE 2, DELETE

"TYPE 1 AND II" SUBSTITUTE "CLASS 1 AND 2".

PAGE 9, PARA. 3.3.1.10, CHIN STRAPS: LINE 1,

AFTER "THE CHIN STRAP FOR" ADD: "ENLISTED

PERSONNEL".

LINE 5, ADD NEW SENTENCE: "THE CHIN

STRAP FOR THE OFFICERS CAP FRAME SHALL CONFORM

TO TYPE I, CLASS 3 OF MIL-S-17615"

PAGE 12, PARA. 3.3.5.1, DELETE IN ITS ENTIRETY

PAGE 12, PARA. 3.3.5.1.1, DELETE IN IT'S

ENTIRETY.

PAGE 12, RENUMBER 3.3.5.1.2 TO 3.3.5.1.1 AND

RENUMBER 3.3.5.1.3 TO 3.3.5.1.2.

PAGE 13, PARA. 3.3.5.2, DELETE IN IT'S ENTIRETY

REPLACE WITH "EACH HAT COVER SHALL HAVE A

CLOTH LABEL WOVEN OR NON-WOVEN CONFORMING TO

CLASS 2 TYPE IV OR TYPE VI OF MIL-DTL-32075".

PAGE 13, PARA. 3.3.5.3, LINE 2, AFTER "TYPE"

DELETE REMAINDER OF PARAGRAPH, REPLACE WITH

"VII, CLASS 4 OF MIL-DTL-32075, EXCEPT THE

LABEL SHALL BEAR THE FOLLOWING INSCRIPTION:

NAME:

SERVICE:

HAT, COMBINATION, MAN'S (CG)

CONTRACT NO: DLA 1000-00-0-0000 (EXAMPLE)

STOCK NO: 8410-00-000-0000 (EXAMPLE)

SIZE: 20 (EXAMPLE)

NAME OF CONTRACTOR:

NAME OF MANUFACTURER:(IF OTHER THAN CONTRACTOR)

PAGE 13, PARA. 3.6, LINE 9, AFTER "FRAME" ADD

"NEITHER THE GOVERNMENT PATTERNS NOR THE

WORKING PATTERNS SHALL BE ALTERED IN ANY WAY

EXCEPT THAT ADDITIONAL NOTCHES FOR USE DURING

CONSTRUCTION ARE PERMITTED ON THE WORKING

PATTERNS. MINOR MODIFICATIONS ARE PERMITTED

WHERE NECESSARY WHEN USING AUTOMATIC EQUIPMENT.

THESE MODIFICATIONS SHALL NOT ALTER THE

APPEARANCE, SERVICEABILITY, OR DIMENTIONAL

REQUIREMENTS CITED IN THE SPECIFICATION".

PAGE 14, PARA. 3.8, AT THE END OF THE PARAGRAPH

ADD "MINOR MODIFICATIONS ARE PERMITTED WHERE

NECESSARY WHEN USING AUTOMATIC EQUIPMENT.

THESE MODIFICATIONS SHALL NOT ALTER THE

APPEARANCE, SERVICEABILITY OR DIMENSIONAL

REQUIREMENTS CITED IN THE SPECIFICATION".

PAGE 19, OPERATION 4. INNER BAND. PROCEDURE "B."

DELETE AND REPLACE WITH "THE

OVERLAPPED ENDS OF THE INNER BAND SHALL BE

POSITIONED TO THE READ PORTION AVOIDING THE

BACK SEAM"

PAGE 23, OPERATION 9, ATTACH BUTTON SCREW TUBE

PROCEDURE "A", LINE 5, DELETE "5-1/2(+/-1/8)"

AND REPLACE WITH "5-3/4(+/-1/4)"

PAGE 23, OPERATION 10, LIN1, DELETE "INSIDE",

REPLACE WITH "OUTSIDE".

ADDITIONAL CHANGES TO MIL-C-24937

THE INSIDE OF THE INNER BAND, POSITION A

PAGE 23, OPERATION 9. ATTACH BUTTON SCREW TUBE,

PROCEDURE "A", LINE 5, DLETE "5-1/2(+/-1/8)"

AND SUBSTITUTE "5-3/4(+/-1/4)"

PAGE 23, OPERATION 10, LINE 1, DELETE "INSIDE",

REPLACE WITH "OUTSIDE".

PAGE 36, TABLE VI, UNDER TEST METHOD COLUMN

DELETE TEST "5660 2/" SUBSTITUTE "AATCC-16"

DELETE "5614 2/" SUBSTITUTE "AATCC-61 TEST 1A"

DELETE "5680 2/", SUBSTITUTE "AATCC-15"

DELETE "110 3/" SUBSTITUTE "TEST METHOD

T411OM-05"

DELETE "5041 2/," SUBSTITUTE "ASTM-D-3776

OPTION C"

DELETE "5651 2/", SUBSTITUTE "AATCC-8"

DELETE "5630 2/", SUBSTITUTE "AATCC-107"

PAGE 37, TABLE VI, DELETE, TEST METHOD "173 3/"

SUBSTITUTE TEST METHOD "411 OM-05"

DELETE "TEST METHOD B OF 5651 2/" SUBSTITUTE

"AATCC-107"

AT THE END OF TABLE IV ADD "FOAM TAPE

MATERIAL IDENT 3.3.1.11

PEEL STRENGTH 3.3.1.11 1/

DENSITY 3.3.1.11 1/

COMPRESSION SET 3.3.1.11 1/

RESISTANCE TO FUNGI,OXIDATION,

AND WEATHERING 1/

PAGE 37, UNDER TABLE VI DELETE FOOTNOTE 2/

AND FOOTNOTE 3/"

PAGE 48-50, DELETE PARA. 5.1 THROUGH 5.4,

SUBSTRITUTE THE FOLLOWING, "5.1 PRESERVATION,

PACKAGING AND MARKING. THE PRESERVATION,

AND PACKAGING AND MARKING SHALL BE AS SPECIFIED

IN THE CONTRACT OR PURCHASE ORDER".

PAGE 50, PARA. 6.2, AFTER LINE 1, INSERT:

"NOTE: THE INTENT OF THE SPECIFICATION SHALL BE

TO HAVE ONE MANUFACTURER CONTRACT FOR THE

FOR THE COMPLETE COMBINATION SERVICE CAP."

PAGE 58, FIGURE 6, ENLISTED, MOUNT HEIGHT

SHALL BE CHANGED FROM 2-3/4 INCHES TO

3-1/4 INCHES.

(Ref. W2986)

ADDITIONAL INFORMATION FOR V-T-276:

V-T-276 HAS BEEN CANCELLED AND REPLACED BY

A-A-52094

ADDITIONAL INFORMATION FOR A-A-52094A:

SIZE 16; TWIST Z; TYPE II; 16.0 OUNCES NOMINAL; GLAZED FINISH

NO ADDITIONAL INFORMATION

(Ref. T1481 - 4/08).

CHANGES TO V-T-295E:

THREAD, NYLON; V-T-295 DATED AUGUST 1, 1985 IS HEREBY CANCELLED; FUTURE ACQUISITONS SHOULD REFER THREAD, NYLON, A-A-59826 DATED 03 MARCH 2009 AS A REPLACEMENT.

ADDITIONAL INFORMATION FOR NN-P-71:

NO ADDITIONAL INFORMATION FOLLOWS..

ADDITIONAL INFORMATION FOR UU-P-31:

NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR CCC-C-700:

NO ADDITIONAL INFORMATION

MIL-DTL 32075: LABEL FOR CLOTHING, EQUIPAGE, AND TENTAGE, GENERAL USE REPLACES DDD-L-20 (Ref. T0451 - June 19, 2007)

INTERIM SPECIFICATION CHANGES TO MIL-DTL-32075:

Page 6, TABLE I, "Physical requirements of the Type VI finished label" Under "Tearing strength" delete: "(lb.) minimum" and substitute: "(gms) minimum"

A-A-52067 BINDING, TEXTILE, COTTON,

. BIAS-CUT, DATED 3/13/90

ADDITIONAL INFORMATION FOR PPP-B-566:

NO ADDITIONAL INFORMATION FOLLOWS..

ADDITIONAL INFORMATION FOR MIL-DTL-823L:

STANDARD SAMPLE FOR AIR FORCE BLUE SHADE 1620

IS AVAILABLE AND IS IDENTIFIED AS

PIECE NO. 93-02, AND IS REFERENCED FOR

SHADE, FINISH AND COLORFASTNESS.

ADDITIONAL INFORMATION FOR MIL-B-3461:

MIL-B-3461G BUTTON, INSIGNIA, METAL,

. UNIFORM AND CAP, 9/30/79;

. AMENDMENT 6 DTD 6/24/03

NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR MIL-S-3577:

NO ADDITIONAL INFORMATION FOLLOWS.

(Ref. T1426)

ADDITIONAL INFORMATION FOR MIL-P-15011: NO ADDL. INFORMATION FOLLOWS.

(ref. T1368 - 6/15/06)

ADDITIONAL INFORMATION FOR MIL-C-16290:

MIL-C-16290 HAS BEEN REPLACED BY A-A-55198

(MOTH-PROOFED) 4/24/91

INTERIM SPEC CHANGES TO MIL-C-16290K:

PAGE 1, 1.2, LINE 1, AFTER "TYPES" ADD

"AND CLASSES"; LINE 3, AFTER "OUNCE" ADD

"-CLASS 2"; LINE 4, AFTER "OUNCE" ADD "-CLASS

4". PAGE 9, 6.2, LINE 4, AFTER "TYPE" ADD "AND

CLASS".

MIL-C--16290 HAS BEEN REPLACED BY

CID-A-A-55198.

ADDITIONAL INFORMATION FOR A-A-55198:

NO ADDITIONAL INFORMATION

ADDITIONAL INFORMATION FOR MIL-S-17615E:

NO ADDITIONAL INFORMATION FOLLOWS

ADDITIONAL INFORMATION FOR MIL-E-17568:

NO ADDITIONAL INFORMATION

ADDITIONAL INFORMATION FOR MIL-C-24927:

INMTERIM CHANGE TO MIL-C-24927A:

PAGE 3, PARA 3.1, LINE 4, DELETE "86246 AND IS

APPLICABLE TO SHADE, FINISH, AND DISCOLORATION"

AND SUBSTITUTE, "94167 AND IS APPLICABLE TO

SHADE, DISCOLORATION (LIGHT, PERSPIRATION,

CROCKING, LAUNDERING), AND FINISH".

ADDITIONAL INFORMATION FOR A-A-50199A DATED 7/31/2006:

STANDARD SAMPLE FOR FOLIAGE GREEN 504 IS MIL-DTL-44436,

ROLL #3728. (THE FOLIAGE GREEN 502 AREA OF THE PATTERN)

AND IS REFERENCED FOR SHADE ONLY. THIS SHADE HAS BEEN

APPROVED FOR TYPE I COLOR STANDARD.

(Ref. T1064).

ADDITIONAL INFORMATION FOR MIL-P-55010:

COMMERCIAL ITEM DESCRIPTION A-A-56021 HAS BEEN

AUTHORIZED FOR USE IN PREFERENCE TO MIL-P-55010.

(Ref. T1396)

ADDITIONAL INFORMATION FOR A-A-56021:

A-A-56021 IS CANCELLED WITHOUT REPLACEMENT.

(Ref. T1417)

ADDITIONAL INFORMATION FOR MIL-C-82252:

NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR FED-STD-15:

FED-STD-151 IS HEREBY

CANCELLED AND REPLACED WITH ASTM-D-498

SEE FED-STD-151B(2) NOT 3

ADDITIONAL INFORMATION FOR FED-STD-311:

INTERIM CHANGES FROM FED-STD-311:

INTERIM CHANGE FROM CH NOT 1, 8/27/71:

SECTION 4, PARA. 4.5.1.2, LINE 8: DELETE THE PERIOD AFTER "BACKBONE" AND ADD "AND TO INDICATE THE ROOT OF THE TAIL".

INTERIM CHANGE FROM TEST METHOD 7011.1:

PARA. 4.1.2: DELETE ENTIRELY AND SUBSTITUTE THE FOLLOWING: "4.1.2 INDICATING DEVICE. THE INDICATING DEVICE SHALL BE EITHER OF THE KINDS LISTED BELOW.

4.1.2.1 THE SHRINKAGE METER DIAL. A DIAL INDICATOR HAVING A FACE DIVIDED INTO 360-380 DEGREES, WITH ONE REVOLUTION OF THE DIAL HAND CORRESPONDING TO 0.5 INCHES (12.7 MM) SPECIMEN MOVEMENT, WITH LEEWAY FOR FOUR REVOLUTIONS.

4.1.2.2 AGD DIAL INDICATOR. A MECHANICAL DEVICE CAPABLE OF REGISTERING ON A SCALE READING OF THE SHRINKAGE OR SWELLING RATIO OF THE SPECIMEN IN A RATIO OF 25 UNITS OF DIAL MOVEMENT TO ONE UNIT OF SPECIMEN MOVEMENT, OR GREATER, AND SHALL ACCURATELY DETECT THE POINT AT WHICH SHRINKAGE BEGINS BY THE MOVEMENT OF THE DIAL NEEDLE. THE INDICATOR SHALL HAVE A SPINDLE CAPABLE OF ATTACHMENT TO THE SPECIMEN AND TO THE ADJUST- ABLE WEIGHT ASSEMBLY (SEE 4.1.11)."

PARA. 4.1.3: DELETE "HEATING COIL" AND INSERT "IMMERSION HEATER".

PARA.7.1: DELETE ENTIRELY AND SUBSTITUTE THE FOLLOWING:

"7.1 THE THERMOMETERS MAY BE PURCHASED FROM THE THOMAS SCIENTIFIC CO. OR FISHER SCIENTIFIC CO., EACH HAVING REGIONAL OFFICES.

7.2 DIAL INDICATORS MAY BE PURCHASED FROM B. C. AMES CO., LEXINGTON STREET, WALTHAM, MA 02254."

(ref. T0211 - 5/23/06)

ADDITIONAL INFORMATION FOR FED-STD-595B:

COPIES OF FED-STD-595 CAN BE OBTAINED FROM:

GENERAL SERVICES ADMINISTRATION - FEDERAL SUPPLY SERVICE BUREAU

SPECIFICATION SECTION, SUITE 8100

470 EAST L'ENFANT PLAZA, SW

WASHINGTON, DC 20407

PHONE (202) 619-8925.

ADDITIONAL INFORMATION: FED-STD-751 HAS BEEN CANCELLED AND REPLACED BY ASTM-D-6193, 4/98 STANDARD PRACTICES FOR STITCHES AND SEAMS.

THIS STANDARD SHOULD BE USED IN PREFERENCE TO FED-STD-751.

(ref. T0216 - May 18, 2006)

ADDITIONAL INFORMATION FOR ASTM-D6193-97(2004):

NO ADDITIONAL INFORMATION FOLLOWS.

(Ref. T8068 - May 18, 2006)

ADDITIONAL INFORMATION FOR MIL-STD-105E:

NOTE: MIL-STD-105 HAS BEEN CANCELLED AND REPLACED BY THE FOLLOWING: "AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI) ANSI/ASQC Z1.4 - SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES".

APPLICATION FOR COPIES SHOULD BE OBTAINED FROM:

AMERICAN SOCIETY FOR QUALITY CONTROL

611 EAST WISCONSIN AVE

MILWAUKEE, WI 53202

MIL-STD-129P, WITH CHANGE 4 - DEPARTMENT OF DEFENSE STANDARD PRACTICE MILITARY MARKING FOR SHIPMENT AND STORAGE - DATED

19 SEPTEMBER 2007

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DEFENSE SUPPLY CENTER (DSCP) CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DSCP C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIP- MENT. THE WORDS "PACKING LIST HERE" SHALL BE STENCILED, NOT

HAND LETTERED, ON THE CONTAINER.