HQ0516-18-T-0003.pdf

SEE ADDENDUM

(No Collect Calls)

HQ051618T0003 20-Jul-2018

b. TELEPHONE NUMBER

301-222-6029

8. OFFER DUE DATE/LOCAL TIME

12:00 PM 10 Aug 2018

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

HQ05169. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

KIESHA V CAMPBELL

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

HQ0516 DEFENSE MEDIA ACTIVITY HQ

6700 TAYLOR AVENUE

FORT MEADE MD 20755

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 16. ADMINISTERED BY

SEE SCHEDULE

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

1,250

NAICS:

334220

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT 41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

HQ051618T0003

Section SF 1449 - CONTINUATION SHEET

SALIENT CHARACTERISTICS

CLIN 0001: Two (2ea) 4.8m Antenna Systems: The contractor shall provide two (2ea) fully functional motorized 4.8m RX C/Ku-band Antenna System consisting of the following minimum characteristics:

• Antenna Reflector system: 4.8 KP - 4.8 meter Compact Cassegrain Antenna Consisting of: C/Ku-band 4 port, Linear Polarized Feed, RX only, 2 RX (3.4 - 4.2 GHz), 2 RX (10.70 - 12.75 GHz), Kingpost Pedestal – Galvanized, Jackscrews in Azimuth (120°) and Elevation (0°-90°), Reflector - white diffusive painted Aluminum panels * Lightning arresting rods, RX Waveguide Integration Kit for 1:2 Redundant LNA/LNB System and Standard and Extended C/Ku-band Linear Feed, Servo Interface Kit for 4.8m LINEAR for Size 11 Resolvers (Drive Motors for AZ, EL and Pol, Limit Switches, Brackets for Mounting Limit Switches and Encoders, Conduits and Cables), Environmental Hub Kit (with Heater) for 4.8m * Front Rain Shield & Rear Hub Cover - Aluminum (Utility Light, Duplex Outlet(s), Hi/Lo Temp alarm T'stats, Vent Fan and Heater with T'stat control), Lightning Arresting Down Conductors, Feed Rain Blower for 4.8m C-band (Automatic, hub mounted controller, Heated air and moisture probe), 7134 Antenna Control System Consisting Of: 7134 ACU: PDU 3HP Az/El; NMRV030/040/030 Pol Motor Support: Az Resolver Kit: El Resolver Kit: Pol Resolver Kit 135FT: ACU to PDU Control Cable 510FT:Az/El/Pol Resolver Cable.

• 1:2 LNB systems: LNB System, 1:2 Redundant, C-Band (3.40-4.20GHz), Includes: Qty.3 ELNB- 3420F, Indoor

Redundancy Controller, Outdoor Switch Plate Assembly, includes offline I/O option with No Options, 300ft.

Control Cable

• 1:2 LNB systems: LNB System, 1:2 Redundant, Ku-Band (11.70-12.20GHz), Includes: Qty.3 ELNB-1109HA, Indoor Redundancy Controller, Outdoor Switch Plate Assembly, includes offline I/O option,

• De-ice System: Deiced Full Reflector, Feed and Sub-reflector for 4.8m Kingpost *Electric Hot Air *

Model 1230 Deice Controller

• L-Band Cabling and Electrical: L-Band cabling (LMR-400) 200' each run and related connectors Conduit runs between indoor equipment and antenna foundation include installation (50' of excavation). Electrical power for De-ice, Motorization, and Utility at the antenna

• (1ea.) 1RU 8-Port IP Spectrum Analyzer, accepts all signals from 5 MHz to 3 GHz and input power levels ranging from –110 to +5 dBm. RBW varies from 1 Hz to 15 MHz (compatible spec as SED Decimator D3), All data communication occurs via built-in Ethernet port.

• (2ea.) Decoder SD, HD and 1080P59.94/50 IRD supporting MPEG 2 and MPEG 4 AVC/H.264, multi-CHROMA

4:2:0 / 4:2:2 and 10-bit. With support for very low latency decoding, an array of IP transport capabilities and DVB-S2X demodulation, supports MPEG 1 Layer 2, AAC-LC, Dolby Digital, Dolby E and Linear PCM audio.

Supports DVB-S, S2, and S2X with modes ranging from QPSK to 64APSK and multi-stream ISI support. Video Decoding: Unique support for 1080P & 10-bit Audio Decoding: Unique support for Dolby Digital, AAC, AAC-6.0 & Audio Expansion. Transport Delivery: Unique support for IP Output, Service Filtering & Zixi Link.

Demodulator: Unique support for 16APSK, 32APSK, DVB-S2X & higher symbol rate configurations dependent upon demod. (Specifications to match Adtec RD-71)

• Foundation and Grounding: Foundation, Kit, Halo grounding

CLIN 0002: 7.3m Antenna System: The contractor shall provide a fully functional motorized 7.3m TX/RX Ku-band Antenna System consisting of the following minimum characteristics:

• 7.3m Antenna Reflector System 7.3 KX - 7.3 meter - Cassegrain Antenna : 7.3 KX - 7.3 meter - Cassegrain Antenna Ku-band, 4-Port, Linear Polarized Feed 2 Tx (13.75 - 14.50 GHz) 2 Rx (10.70 - 12.75 GHz) Kingpost Pedestal - Galvanized Jackscrews in Azimuth (200° in two segments) and Elevation (0°-90°) Reflector - White Diffusive Painted Aluminum Panels Lightning arresting rods TX Axis Crossover Waveguide for 7.3KX Ku-band 4 Port LINEAR Dual TX Run from Azimuth Axis to Feed Flange 1 KW Power Capability RX Waveguide Integration Kit for 1:2 Redundant LNA/LNB System and Ku-band Linear Feed TRF for 1:2 LNB system, RX CGC for 1:2 system, TX CGC for dual run. "Servo Interface Kit for 7.3KX Ku-band, LINEAR for Size 11 Resolvers (Drive Motors for AZ, EL and Pol, Limit Switches, Brackets for Mounting Limit Switches and Resolvers, Conduits and Cables, Requires GDST Model 7134 Antenna Control System), Environmental Hub Kit (with Heater) for 7.3m Ku or DBS-band Extended Travel (Front Rain Shield and Rear Hub Cover – Aluminum, Utility Light, Duplex Outlet(s), Hi/Lo Temp alarm T'stats, Vent Fan and Heater with T'stat control), Lightning Arresting Down Conductors - for 6.3m/7.3m, Feed Rain Blower for 7.3m Ku-band (Automatic, hub mounted controller, Heated air and moisture probe), Dehydrator system, Ladder and Platform - 6.3/7.3m (and 4.8m Ka-band), Galvanized 7134 Antenna Control System Consisting Of: 7134 ACU: PDU 3HP Az/El; NMRV030/040/030 Pol Motor Support; Az Resolver Kit: El Resolver Kit: Pol Resolver Kit 135FT : CCW154-S : ACU to PDU Control Cable 510FT :

CCW155-S : Az/El/Pol Resolver Cable, LNB System, 1:2 Redundant, Ku-Band (11.70-12.20GHz), Includes: Qty.3 ELNB-1109HA, Indoor Redundancy Controller, Outdoor Switch Plate Assembly, includes offline I/O option, No Control Cable 300 feet of cable

• De-Ice System: Deiced Full Reflector, Feed and Subreflector for 7.3KX Extended AZ Travel (Similar to

Electric Hot Air Model 1230 Deice Controller)

• L-Band Cabling and Electrical: L-Band cabling (LMR-400) 200' each run and related connectors Conduit runs between indoor equipment and antenna foundation include installation (50' of excavation Electrical power for De-ice, Motorization, and Utility at the antenna

• Dehydrator system

• 200W Ku-Band RF Package: Outdoor 1:2 System consisting of 3 amplifiers, two ganged waveguide switches, high power dummy load, low power dummy load, forward/reverse couplers on waveguide switch outputs, forward coupler on high power dummy load switch port waveguide/co-ax interconnect, mounting unistrut frame.

• (2ea.) Multi-Codec 10-bit Encoder Support for SD/HD, AVC (H.264) and MPEG 2 video encoding and audio processing for up to sixteen audio channels. High Demand and Flexible AVC (H.264) 4:2:0 / 4:2:2 10-bit Video Encoding - MPEG 2 4:2:0 / 4:2:2 Video Encoding - 3G-SDI via 3G Copper and Fiber SFP Video Interfaces - MP1L2, DD, AAC-LC, HE-AAC (2.0 and 5.1) - Passthrough DD, Dolby E, and LPCM - ASI input for External Transport Stream Multiplexing - Simultaneous ASI, RF (DVB-S2X and DVB-CID), and IP Transport (SMPTE 2022 FEC, UDP, RTP, RTMP, Zixi), DVB-S2X & DVB-CID Zixi Link Dolby Digital (Specifications to match Adtec EN-210)

• (2ea.) Decoder SD, HD and 1080P59.94/50 IRD supporting MPEG 2 and MPEG 4 AVC/H.264, multi- CHROMA 4:2:0 / 4:2:2 and 10-bit. With support for very low latency decoding, an array of IP transport capabilities and DVB-S2X demodulation, supports MPEG 1 Layer 2, AAC-LC, Dolby Digital, Dolby E and Linear PCM audio. Supports DVB-S, S2, and S2X with modes ranging from QPSK to 64APSK and multi-stream ISI support. Video Decoding: Unique support for 1080P & 10-bit Audio Decoding: Unique support for Dolby Digital, AAC, AAC-6.0 & Audio Expansion. Transport Delivery: Unique support for IP Output, Service Filtering & Zixi Link. Demodulator: Unique support for 16APSK, 32APSK, DVB-S2X & higher symbol rate configurations dependent upon demod. (Specifications to match Adtec RD-71)

• (1ea.) Multi-Function Portable TV/Satellite Signal Analyzer for ATSC Standards (with the same Specifications as the PROMAX Ranger NEO ATSC)

• (1ea.) Uplink power control, supports open-loop or comparison modes, 1RU solution for up to 4-channel integral AUPC control, integral beacon with graphical spectrum display, Flexible; directly compensates Peak devices in Uplink chain, High performance; low insertion loss, high gain stability & flatness, Beacon receiver output and key parameter 24hr history recording, Pre-set & user settable smoothing routines to prevent beacon signal noise related response problems.

• M&C (Monitor & Control) Software

• Foundation and Grounding: Foundation, Kit, Halo grounding

CLIN 0003 Remove existing 3.7m antenna system Replace with New 3.7m Ku TX/RX antenna system: The contractor shall provide a fully functional motorized 3.7m TX/RX Ku-band Antenna System consisting of the following minimum characteristics (this Antenna will serve as a replacement for an existing 3.7m Antenna System):

• 3.7m Antenna Reflector System 3.7 KX - 3.7 meter - Cassegrain Antenna : 3.7 KX - 3.7 meter - Cassegrain

Antenna Ku-band, 4-Port, Linear Polarized Feed 2 Tx (13.75 - 14.50 GHz) 2 Rx (10.70 - 12.75 GHz) Kingpost Pedestal - Galvanized Jackscrews in Azimuth (200° in two segments) and Elevation (0°-90°) Reflector - White Diffusive Painted Aluminum Panels Lightning arresting rods TX Axis Crossover Waveguide for 3.7KX Ku-band 4 Port LINEAR Dual TX Run from Azimuth Axis to Feed Flange 1 KW Power Capability RX Waveguide Integration Kit for 1:2 Redundant LNA/LNB System and Ku-band Linear Feed TRF for 1:2 LNB system, RX CGC for 1:2 system, TX CGC for dual run. "Servo Interface Kit for 3.7KX Ku-band, LINEAR for Size 11 Resolvers (Drive Motors for AZ, EL and Pol, Limit Switches, Brackets for Mounting Limit Switches and Resolvers, Conduits and Cables, Requires GDST Model 7134 Antenna Control System), Environmental Hub Kit (with Heater) for 3.7m Ku or DBS-band Extended Travel (Front Rain Shield and Rear Hub Cover – Aluminum, Utility Light, Duplex Outlet(s), Hi/Lo Temp alarm T'stats, Vent Fan and Heater with T'stat control), Lightning Arresting Down Conductors, Feed Rain Blower for 3.7m Ku-band (Automatic, hub mounted controller, Heated air and moisture probe), Dehydrator system, - Galvanized 7134 Antenna Control System Consisting Of: 7134 ACU: PDU 3HP Az/El; NMRV030/040/030 Pol Motor Support; Az Resolver Kit: El Resolver Kit: Pol Resolver Kit 135FT :

CCW154-S : ACU to PDU Control Cable 510FT : CCW155-S : Az/El/Pol Resolver Cable, LNB System, 1:2 Redundant, Ku-Band (11.70-12.20GHz), Includes: Qty.3 ELNB-1109HA, Indoor Redundancy Controller, Outdoor Switch Plate Assembly, includes offline I/O option, No Control Cable 300 feet of cable

• De-Ice System: Deiced Full Reflector, Feed and Subreflector for 3.7KX Extended AZ Travel (Similar to

Electric Hot Air Model 1230 Deice Controller)

• L-Band Cabling and Electrical: L-Band cabling (LMR-400) 200' each run and related connectors Conduit runs between indoor equipment and antenna foundation include installation (50' of excavation Electrical power for De-ice, Motorization, and Utility at the antenna

• 200W Ku-Band RF Package: Outdoor 1:2 System consisting of 3 amplifiers, two ganged waveguide switches, high power dummy load, low power dummy load, forward/reverse couplers on waveguide switch outputs, forward coupler on high power dummy load switch port waveguide/co-ax interconnect, mounting unistrut frame.

• (2ea.) Multi-Codec 10-bit Encoder Support for SD/HD, AVC (H.264) and MPEG 2 video encoding and audio processing for up to sixteen audio channels. High Demand and Flexible AVC (H.264) 4:2:0 / 4:2:2 10-bit Video Encoding - MPEG 2 4:2:0 / 4:2:2 Video Encoding - 3G-SDI via 3G Copper and Fiber SFP Video

Interfaces - MP1L2, DD, AAC-LC, HE-AAC (2.0 and 5.1) - Passthrough DD, Dolby E, and LPCM - ASI input for External Transport Stream Multiplexing - Simultaneous ASI, RF (DVB-S2X and DVB-CID), and IP Transport (SMPTE 2022 FEC, UDP, RTP, RTMP, Zixi), DVB-S2X & DVB-CID Zixi Link Dolby Digital (Specifications to match Adtec EN-210)

• (2ea.) Decoder SD, HD and 1080P59.94/50 IRD supporting MPEG 2 and MPEG 4 AVC/H.264, multi- CHROMA 4:2:0 / 4:2:2 and 10-bit. With support for very low latency decoding, an array of IP transport capabilities and DVB-S2X demodulation, supports MPEG 1 Layer 2, AAC-LC, Dolby Digital, Dolby E and Linear PCM audio. Supports DVB-S, S2, and S2X with modes ranging from QPSK to 64APSK and multi-stream ISI support. Video Decoding: Unique support for 1080P & 10-bit Audio Decoding: Unique support for Dolby Digital, AAC, AAC-6.0 & Audio Expansion. Transport Delivery: Unique support for IP Output, Service Filtering & Zixi Link. Demodulator: Unique support for 16APSK, 32APSK, DVB-S2X & higher symbol rate configurations dependent upon demod. (Specifications to match Adtec RD-71)

• (1ea.) Multi-Function Portable TV/Satellite Signal Analyzer for ATSC Standards (with the same Specifications as the PROMAX Ranger NEO ATSC)

• (1ea.) Uplink power control, supports open-loop or comparison modes, 1RU solution for up to 4-channel integral AUPC control, integral beacon with graphical spectrum display, Flexible; directly compensates Peak devices in Uplink chain, High performance; low insertion loss, high gain stability & flatness, Beacon receiver output and key parameter 24hr history recording, Pre-set & user settable smoothing routines to prevent beacon signal noise related response problems.

• Foundation and Grounding: Use existing Foundation, New Halo grounding Kit

CLIN 0004 Install two (2ea) 4.8m, (1ea) 7.3m Antenna System and disassemble/de-installed existing 3.7m antenna system and install (1ea.) 3.7m Antenna system: The contractor shall install two (2ea) fully functional motorized 4.8m RX C/Ku-band Antenna Systems defined in CLIN 0001, a 7.3m TX/RX Ku-band Antenna System defined in CLIN 0002 and disassemble / de-installed existing 3.7m Antenna system and install a fully functional motorized 3.7m TX/RX Ku-band Antenna System defined in

CLIN 0003

• The contractor shall install all necessary cabling from the dish to the pull boxes and from the pull boxes to the associated equipment racks in the main antenna building through the existing conduit.

TECHNICAL COMPLIANCE SHEET

Defense Media Activity intends to upgrade satellite antennas and associated equipment at its satellite facility. This will include new steerable uplink and downlink dishes with heaters (Ku and C Band). Work will include all cabling from the antenna building to the dishes, any rental equipment needed or supplies provided by the contractor for a turnkey solution.

NEW ITEMS ONLY, NO GRAY MARKET ITEMS. TAA COMPLIANT ITEMS ONLY

Please indicate, below, whether or not your proposed product meets, or does not meet, each of the following required system elements. Indicate technical compliance or non-compliance by placing an “X” in the appropriate box. This form is required with all proposals.

To be considered technically acceptable, offers must be able to meet or exceed required capability in each of the below areas.

CLIN 0001: Two (2ea) 4.8m Antenna Systems:

The contractor shall provide two (2ea) fully functional motorized 4.8m RX C/Ku-band Antenna System consisting of the following minimum characteristics:

Item

Meets or Exceeds

Does not Meet

Must provide detailed description of specific items.

• Antenna Reflector system: 4.8 KP - 4.8 meter Compact Cassegrain Antenna Consisting of:

C/Ku-band 4 port, Linear Polarized Feed, RX only, 2 RX (3.4 - 4.2 GHz), 2 RX (10.70 - 12.75 GHz), Kingpost Pedestal – Galvanized, Jackscrews in Azimuth (120°) and Elevation (0°-90°), Reflector - white diffusive painted Aluminum panels * Lightning arresting rods, RX Waveguide Integration Kit for 1:2 Redundant LNA/LNB System and Standard and Extended C/Ku-band Linear Feed, Servo Interface Kit for 4.8m LINEAR for Size 11 Resolvers (Drive Motors for AZ, EL and Pol, Limit Switches, Brackets for Mounting Limit Switches and Encoders, Conduits and Cables), Environmental Hub Kit (with Heater) for 4.8m * Front Rain Shield & Rear Hub Cover - Aluminum (Utility Light, Duplex Outlet(s), Hi/Lo Temp alarm T'stats, Vent Fan and Heater with T'stat control), Lightning Arresting Down Conductors, Feed Rain Blower for 4.8m C-band (Automatic, hub mounted controller, Heated air and moisture probe), 7134 Antenna Control System Consisting Of: 7134 ACU: PDU 3HP Az/El;

NMRV030/040/030 Pol Motor Support: Az Resolver Kit: El Resolver Kit: Pol Resolver Kit 135FT: ACU to PDU Control Cable 510FT:Az/El/Pol Resolver Cable.

• 1:2 LNB systems: LNB System, 1:2 Redundant, C-Band (3.40-4.20GHz), Includes:

Qty.3 ELNB- 3420F, Indoor Redundancy Controller, Outdoor Switch Plate Assembly, includes offline I/O option with No Options, 300ft. Control Cable

• 1:2 LNB systems: LNB System, 1:2 Redundant, Ku-Band (11.70-12.20GHz), Includes: Qty.3 ELNB-1109HA, Indoor Redundancy Controller, Outdoor Switch Plate Assembly, includes offline I/O option

• De-ice System: Deiced Full Reflector, Feed and Sub-reflector for 4.8m Kingpost *Electric Hot Air * Model 1230 Deice Controller

• L-Band Cabling and Electrical: L-Band cabling (LMR-400) 200' each run and related connectors Conduit runs between indoor equipment and antenna foundation include installation (50' of excavation). Electrical power for De-ice, Motorization, and Utility at the antenna

• (1ea.) 1RU 8-Port IP Spectrum Analyzer, accepts all signals from 5 MHz to 3 GHz and input power levels ranging from –110 to +5 dBm. RBW varies from 1 Hz to 15 MHz (compatible spec as SED Decimator D3), All data communication occurs via built-in Ethernet port.

• (2ea.) Decoder SD, HD and 1080P59.94/50 IRD supporting MPEG 2 and MPEG 4 AVC/H.264, multi‐CHROMA 4:2:0 / 4:2:2 and 10-bit. With support for very low latency decoding, an array of IP transport capabilities and DVB-S2X demodulation, supports MPEG 1 Layer 2, AAC-LC, Dolby Digital, Dolby E and Linear PCM audio. Supports DVB-S, S2, and S2X with modes ranging from QPSK to 64APSK and multi‐stream ISI support. Video Decoding: Unique support for 1080P & 10-bit Audio Decoding: Unique support for Dolby Digital, AAC, AAC-6.0 & Audio Expansion.

Transport Delivery: Unique support for IP Output, Service Filtering & Zixi Link.

Demodulator: Unique support for 16APSK, 32APSK, DVB-S2X & higher symbol rate configurations dependent upon demod.

(Specifications to match Adtec RD-71)

• Foundation and Grounding: Foundation, Kit, Halo grounding

CLIN 0002: 7.3m Antenna System:

The contractor shall provide a fully functional motorized 7.3m TX/RX Ku-band Antenna System consisting of the following minimum characteristics:

Does not Meet

Must provide detailed description of specific items.

• 7.3m Antenna Reflector System 7.3 KX - 7.3 meter - Cassegrain Antenna : 7.3 KX - 7.3 meter - Cassegrain Antenna Ku-band, 4-Port, Linear Polarized Feed 2 Tx (13.75 - 14.50 GHz) 2 Rx (10.70 - 12.75 GHz) Kingpost Pedestal - Galvanized Jackscrews in Azimuth (200° in two segments) and Elevation (0°-90°) Reflector - White Diffusive Painted Aluminum Panels Lightning arresting rods TX Axis Crossover Waveguide for 7.3KX Ku-band 4 Port LINEAR Dual TX Run from Azimuth

Axis to Feed Flange 1 KW Power Capability RX Waveguide Integration Kit for 1:2 Redundant LNA/LNB System and Ku-band Linear Feed TRF for 1:2 LNB system, RX CGC for 1:2 system, TX CGC for dual run.

"Servo Interface Kit for 7.3KX Ku-band, LINEAR for Size 11 Resolvers (Drive Motors for AZ, EL and Pol, Limit Switches, Brackets for Mounting Limit Switches and Resolvers, Conduits and Cables, Requires GDST Model 7134 Antenna Control System), Environmental Hub Kit (with Heater) for 7.3m Ku or DBS-band Extended Travel (Front Rain Shield and Rear Hub Cover – Aluminum, Utility Light, Duplex Outlet(s), Hi/Lo Temp alarm T'stats, Vent Fan and Heater with T'stat control), Lightning Arresting Down Conductors - for 6.3m/7.3m, Feed Rain Blower for 7.3m Ku-band (Automatic, hub mounted controller, Heated air and moisture probe), Ladder and Platform - 6.3/7.3m (and 4.8m Ka-band), Galvanized 7134 Antenna Control System Consisting Of: 7134 ACU: PDU 3HP Az/El;

NMRV030/040/030 Pol Motor Support; Az Resolver Kit: El Resolver Kit: Pol Resolver Kit 135FT : CCW154-S : ACU to PDU Control Cable 510FT : CCW155-S : Az/El/Pol Resolver Cable, LNB System, 1:2 Redundant, Ku-Band (11.70-12.20GHz), Includes: Qty.3 ELNB- 1109HA, Indoor Redundancy Controller, Outdoor Switch Plate Assembly, includes offline I/O option, No Options, Control Cable 300 feet of cable

• De-Ice System: Deiced Full Reflector, Feed and Subreflector for 7.3KX Extended AZ Travel (Similar to Electric Hot Air Model 1230 Deice Controller)

• L-Band Cabling and Electrical: LBand cabling (LMR-400) 200' each run and related connectors Conduit runs between indoor equipment and antenna foundation include installation (50' of excavation Electrical power for De-ice, Motorization, and Utility at the antenna

• 200W Ku-Band RF Package: Outdoor 1:2 System consisting of 3 amplifiers, two ganged waveguide switches, high power dummy load, low power dummy load, forward/reverse couplers on waveguide switch outputs, forward coupler on high power dummy load switch port waveguide/co-ax interconnect, mounting unistrut frame.

• (2ea.) Multi-Codec 10-bit Encoder Support for SD/HD, AVC (H.264) and MPEG 2 video encoding and audio processing for up to sixteen audio channels. High Demand and Flexible AVC (H.264) 4:2:0 / 4:2:2 10-bit Video Encoding - MPEG 2 4:2:0 / 4:2:2 Video Encoding - 3GSDI via 3G Copper and Fiber SFP Video Interfaces - MP1L2, DD, AAC-LC, HE-AAC (2.0 and 5.1) - Passthrough DD, Dolby E, and LPCM - ASI input for External Transport Stream Multiplexing - Simultaneous ASI, RF (DVB-S2X and DVB-CID), and IP Transport

(SMPTE 2022 FEC, UDP, RTP,

RTMP, Zixi), DVB-S2X & DVB CID Zixi Link Dolby Digital (Specifications to match Adtec EN-210)

• (2ea.) Decoder SD, HD and 1080P59.94/50 IRD supporting MPEG 2 and MPEG 4 AVC/H.264, multi‐CHROMA 4:2:0 / 4:2:2 and 10-bit. With support for very low latency decoding, an array of IP transport capabilities and DVB-S2X demodulation, supports MPEG 1 Layer 2, AAC-LC, Dolby Digital, Dolby E and Linear PCM audio. Supports DVB-S, S2, and S2X with modes ranging from QPSK to 64APSK and multi‐stream ISI support. Video Decoding: Unique support for 1080P & 10-bit Audio Decoding: Unique support for Dolby Digital, AAC, AAC-6.0 & Audio Expansion.

Transport Delivery: Unique support for IP Output, Service Filtering & Zixi Link.

Demodulator: Unique support for 16APSK, 32APSK, DVB-S2X & higher symbol rate

• (1ea.) Multi-Function Portable TV/Satellite Signal Analyzer for ATSC Standards (with the same Specifications as the PROMAX Ranger

NEO ATSC)

• (1ea.) Uplink power control, supports open-loop or comparison modes, 1RU solution for up to 4-channel integral AUPC control, integral beacon with graphical spectrum display, Flexible; directly compensates Peak devices in Uplink chain, High performance; low insertion loss, high gain stability & flatness, Beacon receiver output and key parameter 24hr history recording, Pre-set & user settable smoothing routines to prevent beacon signal noise related response problems.

CLIN 0003: 3.7m Antenna system The contractor shall provide a fully functional motorized 3.7m TX/RX Ku-band Antenna System consisting of the following minimum characteristics:

Does not Meet

Must provide detailed description of specific items.

• 3.7m Antenna Reflector System 3.7 KX - 3.7 meter - Cassegrain Antenna : 3.7 KX - 3.7 meter - Cassegrain Antenna Ku-band, 4-Port, Linear Polarized Feed 2 Tx (13.75 - 14.50 GHz) 2 Rx (10.70 - 12.75 GHz) Kingpost Pedestal - Galvanized Jackscrews in Azimuth (200° in two segments) and Elevation (0°-90°) Reflector - White Diffusive Painted Aluminum Panels Lightning arresting rods TX Axis Crossover Waveguide for 3.7KX Ku-band 4 Port LINEAR Dual TX Run from Azimuth Axis to Feed Flange 1 KW Power Capability RX Waveguide Integration Kit for 1:2 Redundant LNA/LNB System and Ku-band Linear Feed TRF for 1:2 LNB system, RX CGC for 1:2 system, TX CGC for dual run.

"Servo Interface Kit for 3.7KX Ku-band, LINEAR for Size 11 Resolvers (Drive Motors for AZ, EL and Pol, Limit Switches, Brackets for Mounting Limit Switches and Resolvers, Conduits and Cables, Requires GDST Model 7134 Antenna Control System), Environmental Hub Kit (with Heater) for 3.7m Ku or DBS-band Extended Travel (Front Rain Shield and Rear Hub Cover – Aluminum, Utility Light, Duplex Outlet(s), Hi/Lo Temp alarm T'stats, Vent Fan and Heater with T'stat control), Lightning Arresting Down Conductors - for 6.3m/3.7m, Feed Rain Blower for 3.7m Ku-band (Automatic, hub mounted controller, Heated air and moisture probe), Galvanized 7134 Antenna Control System Consisting Of:

7134 ACU: PDU 3HP Az/El;

NMRV030/040/030 Pol Motor Support; Az Resolver Kit: El Resolver Kit: Pol Resolver Kit 135FT : CCW154-S : ACU to PDU Control Cable 510FT : CCW155-S : Az/El/Pol Resolver Cable, LNB System, 1:2 Redundant, Ku-Band (11.70-12.20GHz), Includes: Qty.3 ELNB- 1109HA, Indoor Redundancy Controller, Outdoor Switch Plate Assembly, includes offline I/O option, No Options, Control Cable 300 feet of cable

• De-Ice System: Deiced Full Reflector, Feed and Subreflector for 3.7KX Extended AZ Travel (Similar to Electric Hot Air Model 1230 Deice Controller)

• L-Band Cabling and Electrical: LBand cabling (LMR-400) 200' each run and related connectors Conduit runs between indoor equipment and antenna foundation include installation (50' of excavation Electrical power for De-ice, Motorization, and Utility at the antenna

• 200W Ku-Band RF Package: Outdoor 1:2 System consisting of 3 amplifiers, two ganged waveguide switches, high power dummy load, low power dummy load, forward/reverse couplers on waveguide switch outputs, forward coupler on high power dummy load switch port waveguide/co-ax interconnect, mounting unistrut frame.

• (2ea.) Multi-Codec 10-bit Encoder Support for SD/HD, AVC (H.264) and MPEG 2 video encoding and audio processing for up to sixteen audio channels. High Demand and Flexible AVC (H.264) 4:2:0 / 4:2:2 10-bit Video Encoding - MPEG 2 4:2:0 / 4:2:2 Video Encoding - 3GSDI via 3G Copper and Fiber SFP Video Interfaces - MP1L2, DD, AAC-LC, HE-AAC (2.0 and 5.1) - Passthrough DD, Dolby E, and LPCM - ASI input for External Transport Stream Multiplexing - Simultaneous ASI, RF (DVB-S2X and DVB-CID), and IP Transport

(SMPTE 2022 FEC, UDP, RTP,

RTMP, Zixi), DVB-S2X & DVB CID Zixi Link Dolby Digital (Specifications to match Adtec EN-210)

• (2ea.) Decoder SD, HD and 1080P59.94/50 IRD supporting MPEG 2 and MPEG 4 AVC/H.264, multi‐CHROMA 4:2:0 / 4:2:2 and 10-bit. With support for very low latency decoding, an array of IP transport capabilities and DVB-S2X demodulation, supports MPEG 1 Layer 2, AAC-LC, Dolby Digital, Dolby E and Linear PCM audio. Supports DVB-S, S2, and S2X with modes ranging from QPSK to 64APSK and multi‐stream ISI support. Video Decoding: Unique support for 1080P & 10-bit Audio Decoding: Unique support for Dolby Digital, AAC, AAC-6.0 & Audio Expansion.

Transport Delivery: Unique support for IP Output, Service Filtering & Zixi Link.

Demodulator: Unique support for 16APSK, 32APSK, DVB-S2X & higher symbol rate

• (1ea.) Multi-Function Portable TV/Satellite Signal Analyzer for ATSC Standards (with the same Specifications as the PROMAX Ranger

NEO ATSC)

• (1ea.) Uplink power control, supports open-loop or comparison modes, 1RU solution for up to 4-channel integral AUPC control, integral beacon with graphical spectrum display, Flexible; directly compensates Peak devices in Uplink chain, High performance; low insertion loss, high gain stability & flatness, Beacon receiver output and key parameter 24hr history recording, Pre-set & user settable smoothing routines to prevent beacon signal noise related response problems.

CLIN 0004 Install two (2ea) 4.8m, (1ea) 7.3m Antenna System and de-install existing 3.7m antenna system and install (1ea.) 3.7m Ku TX antenna system:

Does not Meet

Must provide detailed description of specific items.

• The contractor shall install two (2ea) fully functional motorized 4.8m RX C/Ku-band Antenna Systems defined in CLIN 0001, a 7.3m TX/RX Ku-band Antenna System defined in CLIN 0002 and remove existing 3.7m Antenna system and install a fully functional motorized 3.7m TX/RX Ku-band Antenna System defined in CLIN 0003

• The contractor shall install all necessary cabling from the dish to the pull boxes and from the pull boxes to the associated equipment racks in the main antenna building through the existing conduit.

RESPONSES TO QUESTIONS

1. Will there be a CLIN to provide for a site survey for the civil works and specific locations?

Answer: No.

2. Can we bid other antenna manufacturer as an option?

Answer: There is no brand name requirement, however, the type of satellite dish must be Cassegrain.

3. Is there any G/T and EIRP Specifications?

Answer: Not to exceed the FCC Regulations.

4. Are any security clearances to go to site?

Answer: No security clearance required to visit site, only valid ID’s required.

5. Where are Ku band HPAs located? How far from the antenna? Is there a building or a shelter to install the HPAs or shall we build a frame with rain shield at the base of the antenna to mount the HPAs?

Answer: There is a shelter to house the equipment in. Depending on the Antenna the longest run to the shelter is no more than 1000’.

6. Does the contractor build the antenna foundations and install the conduit from the building to the antennas?

Answer: The contractor is responsible for the antenna foundation and conduit to the conduit boxes. There are conduit boxes that have the conduit ran to the building (each site has a box for power and a box for control).

7. Will the government provide an electrician to run the AC power?

Answer: Once the power cables are ran to the building the electricians on staff will connect to the circuit box for power. (we will need the power requirement prior to install to ensure the proper breakers are on hand)

8. Is there a dock to off load the antennas?

Answer: No, the antenna will be delivered to the satellite facility on Rock Ave, Ft. Meade, MD.

9. It is not clear whether the selected vendor is providing the civil works for the foundations and cable conveyance (conduits/cable tray) or if DMA is providing them. We understand that DMA are asking for the foundation hardware and grounding kits.

Answer: The contractor will be responsible for the foundation and the contractor shall install all necessary cabling from the dish to the pull boxes and from the pull boxes to the associated equipment racks in the main antenna building through the existing conduit.

10. There is no mention of the Governments expectations for testing the new systems. With new antennas and associated electronics we would expect both unit and system tests to be performed. We would like to understand what DMA expects for testing and performance to accept the system post installation.

Answer: For uplink dishes, a good test would consist of being able to successfully transmit a HD video signal. For Downlink dishes, a good test would consist of being able to successfully downlink a HD video signal For all steerable dishes, a good test would consist of being able to acquire all satellites in the orbital slots requested by the customer. For all heater systems, a good test would consist of heaters being turned on when sensor detects moisture and when temperature drops below 34 degrees

11. For the RANGER Neo which one of these three options are required?-RANGER Neo Lite ATSC, Multifunction TV & Satellite Analyser-RANGER Neo +ATSC, Advanced Multifunction TV & Satellite Analyser-RANGER Neo 2ATSC, Professional TV & Satellite Analyzer

Answer: RANGER Neo Lite ATSC, Multifunction TV & Satellite Analyser

12. For the SED Decimator D3 should it be configured with 4 ports active or all 8 ports active?

What type and impedience Input and Output connectors are required? F-type, BNC or SMA? 50 Ohm or 75 Ohm?

Answer: 8 ports active – 75 Ohm

13. What extent of civil works is required by the bidder? (pour pad,trench, conduit, etc?)

Answer: ALL

14. Where is the power source/IFL termination location?

Answer: On the satellite main building

15. Is the expectation for the vendor to make building entry penetrations?

Answer: No

16. Is the government providing an electrical disconnect switch on the side of the building?

Answer: The government will provide circuit breakers in the main power boxes with the necessary amperage once contract finalized

17. Are permits required?

Answer: No

18. Are racks available or should the vendor provide them?

Answer: Rack space will be provided in the main shelter

19. Who installs the equipment in the rack(s)?

Answer: Contractor

20. What power is available at the racks? (Volts/Amps) Answer: Standard volts and amp

21. Are they any restriction on the Antenna manufacturer country of origin?

Answer: Only from designated countries. See FAR 25.1 Buy America-Supplies

“Designated country” means any of the following countries:

(1) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen and Matsu (Chinese Taipei)”), Ukraine, or United Kingdom);

(2) A Free Trade Agreement (FTA) country (Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Oman, Panama, Peru, or Singapore);

(3) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or

(4) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).

22. Would it be possible to bid a non US manufacturer if we supply all US Made antenna electronics?

Answer: The Buy American statute restricts the purchase of supplies that are not domestic end products.

For manufactured end products, the Buy American statute uses a two-part test to define a domestic end product. The article must be manufactured in the United States; and the cost of domestic components must exceed 50 percent of the cost of all the components.

23. Are there any countries we cannot use?

Answer: Please see Question 21. These are the only designated countries.

24. Can a layout or drawing of the site be provided showing distances between antennas and equipment locations?

Answer: Provided a picture and diagram of the Antenna layout already can go to google maps (39.091312, -76.744039) measure distance if needed. The longest cable run to the shelter is approx. 250 feet.

25. Will Government provide the desired specifications for the UPC?

Answer: Needs to be able to control remotely and our plant is 75 Ohm

26. Would Government please clarify if the SSPAs are required to be 200W Plinear or Psat there is a very large cost difference in these two solutions.

Answer: Would prefer Plinear but either solution is acceptable

27. Is there a 10Mhz reference standard available for the SSPAs or should they be internally clocked?

Answer: They would need to be internally clocked until the signal generator is installed at the shelter.

28. Please describe connectivity requirements (or system demarcation point) concerning the IFL cabling terminating in the racks and indoor equipment (encoders, IRD’s, spectrum analyzers, etc.). Is the contractor to provide dividers, patch panels, switchers or otherwise? A simple system block diagram would be helpful.

Answer: The contractor will be responsible to terminate all cable to the equipment they install in the main shelters racks, patch panels are already installed in the building and will use the open ports to run cables to.

29. Please describe the approval process required for the civil works (drawings, soil testing, cure tests, etc.).

Answer: None needed as the Satellite farm has been approved for multiple antennas which these fall into

30. Is a milestone payment plan to be negotiated with the successful awardee? Should a preference be submitted as part of the quotation?

Answer: Payments will be made once items are received and accepted by the government. Installation will be paid based on percentage of completion (will be negotiated with awardee)

31. Delivery for some of the equipment is still projected at beyond the stated 60 day delivery timeframe. Can an exception be noted in the quotation (naming specific items and OEM delivery dates) as long as the overall schedule is not impacted?

Answer: Yes. If known what the delivery schedule for the equipment will be, please note in quote.

32. Should non-listed, but recommended items be noted as “optional” in the quotation?

Answer: Yes

33. What system documentation is required for project completion? IE: System drawings, Cable run list, Block and Level, Antenna pattern tests, etc

Answer: System drawings, Cable run list, Block and Level, Antenna pattern tests, documentation needed for project completion.

34. Please confirm no permits are required for the construction of the foundation; and if any are, they will be furnished by the Gov’t

Answer: The Antenna site has been approved for a specific number of antennas which this fall into

35. Will a lift plan be required for the antenna installation?

Answer: No lift plan required

36. Will site access be available 6am to 7pm? 7 days a week?

Answer: Site will be accessible Monday thru Friday from 6am til 4pm

37. Will crew be escorted to/from site or will we be given gate pass?

Answer: Crew will be given temporary base passes for the duration of the project

38. What is the standard voltage of the existing racks? Is it single or three phase?

Answer: The racks are single phase

39. Please define the term “NMR V 030/040/030” as used in the requirements for the Pol Motor support for CLIN 0001 and 0002.

Answer: NMR V is the brand for the worm gear reducers for the motor. This or something equivalent will be acceptable

40. Please define the term “CGC” as used for the 1:2 system and dual run for CLIN 0002.

Answer: CGC stands for Complimentary Ground Component

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

2 Each

4.8m Antenna Systems

FFP

NO GRAY MARKET ITEMS. TAA COMPLIANT ITEMS ONLY. NEW ONLY,

NO REFURSHIBISHED ITEMS

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

NET AMT

1 Each

7.3m Antenna System

FFP

NO GRAY MARKET ITEMS. TAA COMPLIANT ITEMS ONLY. NEW ONLY,

NO REFURSHIBISHED ITEMS

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD

1 Each

Replace 3.7m Ku TX antenna

FFP

NO GRAY MARKET ITEMS. TAA COMPLIANT ITEMS ONLY. NEW ONLY,

NO REFURSHIBISHED ITEMS

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD

1 Lot

Installation of Antenna Systems

FFP

The contractor shall install two (2ea) fully functional motorized 4.8m RX C/Ku-band Antenna Systems defined in CLIN 0001, 7.3m TX/RX Ku-band Antenna System defined in CLIN 0002 and de-install the existing 3.7m Antenna system and install a fully functional motorized 3.7m TX/RX Ku-band Antenna System defined in CLIN 0003.

The contractor shall install all necessary cabling from the dish to the pull boxes and from the pull boxes to the associated equipment racks in the main antenna building through the existing conduit. LABOR RATE:

LABOR CATEGORY:

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 60 dys. ADC 2 N/A

0002 60 dys. ADC 1 N/A

0003 60 dys. ADC 1 N/A

0004 180 dys. ADC 1 N/A

CLAUSES INCORPORATED BY REFERENCE

52.202-1 Definitions NOV 2013 52.203-6 Alt I Restrictions On Subcontractor Sales To The Government

(Sep 2006) -- Alternate I

OCT 1995

52.203-17 Contractor Employee Whistleblower Rights and Requirement To Inform Employees of Whistleblower Rights

APR 2014

52.204-7 System for Award Management JUL 2013 52.204-13 System for Award Management Maintenance OCT 2016 52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.209-7 Information Regarding Responsibility Matters JUL 2013 52.212-1 Instructions to Offerors--Commercial Items JAN 2017 52.212-4 Contract Terms and Conditions--Commercial Items JAN 2017 52.213-2 Invoices APR 1984 52.225-13 Restrictions on Certain Foreign Purchases JUN 2008 52.225-25 Prohibition on Contracting with Entities Engaging in Certain

Activities or Transactions Relating to Iran-- Representation and Certifications.

OCT 2015

52.228-5 Insurance - Work On A Government Installation JAN 1997 52.229-3 Federal, State And Local Taxes FEB 2013 52.232-1 Payments APR 1984 52.232-33 Payment by Electronic Funds Transfer--System for Award

Management

JUL 2013

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

52.233-3 Protest After Award AUG 1996 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 52.243-1 Changes--Fixed Price AUG 1987 52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-4 Inspection Of Services--Fixed Price AUG 1996 52.246-16 Responsibility For Supplies APR 1984 52.247-34 F.O.B. Destination NOV 1991 52.253-1 Computer Generated Forms JAN 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD

Officials

NOV 2011

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7004 Alt A System for Award Management Alternate A FEB 2014 252.204-7006 Billing Instructions OCT 2005 252.204-7008 Compliance With Safeguarding Covered Defense Information

Controls

AUG 2015

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

SEP 2015

252.204-7015 Disclosure of Information to Litigation Support Contractors FEB 2014 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

JUN 2012

252.232-7010 Levies on Contract Payments DEC 2006 252.244-7000 Subcontracts for Commercial Items JUN 2013

CLAUSES INCORPORATED BY FULL TEXT

52.0100-4028 CONTRACT CONTACT INFORMATION (DMA)(OCT 2008)

The Defense Media Activity contact name, e-mail address and telephone # are as follows:

CONTRACTING OFFICER: Kiesha Campbell, kiesha.v.campbell.civ@mail.mil, 301-222-6029

CONTRACT SPECIALIST:

FOR FOLLOW-UP INFORMATION REGARDING CHANGES OR LATE PAYMENTS, PLEASE

CONTACT:

THE CONTRACTING OFFICER SHOWN ABOVE.

(End of Local Instruction)

52.0100-4094 MARKING INSTRUCTIONS FOR ALL ITEMS TO INCLUDE DROP

SHIP AND DIRECT SHIPMENT (DMA)(OCT 2008)

The Contractor shall attach two (2) copies of a detailed packing list with each box or container with unlike items where the full description of the contents is not authorized or cannot be shown. Include one

(1) copy of the packing list inside the box or container and attach one (1) copy of the packing list on the outside of the box or container. The outside of the box or container must also include the complete shipping address as provided in the schedule and the Contract/Purchase/Delivery Order number located on Page 1 of this document.

The packing list shall contain the following information:

(a) Contract number/Purchase Order number or Delivery Order number

(b) Package number and set number (if any) of the container.

(c) A list of the contents which shows the quantity by item, item description, part number, type and size, unit of issue if other than each.

NOTE!

mailto:kiesha.v.campbell.civ@mail.mil

The government WILL NOT ACCEPT items shipped without a packing list especially when the content of the package is unidentifiable; rejected items will be returned at the contractor’s expense.

INCOMPLETE DELIVERIES

Incomplete delivery refers to the incomplete shipment of a unit of issue of an individual contract line item (CLIN). Such Incomplete, or fragmented delivery of any part of a CLIN is not authorized and will not be accepted. Each item (CLIN), including all components and sub-items, is to be delivered complete.

Where sub-line items are reflected as component parts of an item, all sub-line items must be delivered simultaneously to form the complete item.

(End of Local Instruction)

52.209-5 CERTIFICATION REGARDING RESPONSIBILITY MATTERS (OCT 2015)

(a)(1) The Offeror certifies, to the best of its knowledge and belief, that-

(i) The Offeror and/or any of its Principals-

(A) Are ( ) are not ( ) presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency;

(B) Have ( ) have not ( ), within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a public (Federal, State, or local) contract or subcontract; violation of Federal or State antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property (if offeror checks “have”, the offeror shall also see 52.209-7, if included in this solicitation); and

(C) Are ( ) are not ( ) presently indicted for, or otherwise criminally or civilly charged by a governmental entity with,…