05.Virtual_Studio_Salient_Characteristics_Document_v2.pdf

Virtual Television Studio (Salient Characteristics)

NOTE: All of the CLINs contained herein must be fully compatible and functional as a Virtual Television Studio System. All of the components must integrate into the existing television studios, control rooms, fiber optic cabling, video routing and the Ross Vision video switcher located at DMA HQ television studio 2 and Control Room 3.

CLIN 0004: Blackmagic Studio Camera 2 (or equivalent)

1. Compact and lightweight broadcast camera designed for live production

2. Mounting: 2 x 3/8" tripod mount, 10 x 1/4"-20 threaded holes (4 on top of the camera, 3 on left, 3 on right) Must accommodate mounting at 90 degree angle

3. Sensor Size: 12.48mm x 7.02mm

4. Lens Mount: Micro Four Thirds (active), with auto iris control button

5. Shutter Speed: 1/50 to 1/2000 second

6. Resolution: 1920 x 1080p: 60/59.94/50/30/29.97/25/24/23.98, 1920 x 1080i: 50/59.94/60, 1280 x 720p: 50/59.94/60

7. LCD Display: Integrated TFT-LCD, 10.1", and resolution 1920 x 1200

8. 3G Optical Fiber input and output (via optical fiber module)

9. 1 x Reference input

10. SDI Video Output: 1 x 3G-SDI, 10-bit 4:2:2

11. Analog Audio Input: 2 x XLR analog, switchable between mic and line levels; Phantom power support

12. Analog Audio Output: Aviation headphone (Fixed Wing Plugs) output for talkback and audio monitoring

13. SDI Audio Output: 2 channels in 3G-SDI 48 KHz and 24-bit, 2 channels for talkback on channel 15-16 Requirement: 2 each

CLIN 0005: Blackmagic ATEM Television Studio HD (or equivalent):

1. 8-Channel SDI/HDMI Switcher

2. NTSC/PAL, HD, Computer Signal Compatible

3. 10-Channel Digital Audio Mixer

4. Built-In Front Panel Controls

5. Keyers: Upstream: 1, Downstream: 2, Chroma: 1, Linear/Luma: 3, Transition, DVE: 1

6. Transitions required: Cut, Mix, Dip, Wipe

7. Built-in Digital Video Effects (DVE) processor with 35 built-in pre-programmed moves

8. Inputs: 4 x BNC, 3G/HD/SD-SDI, 4 x HDMI Type A, 2 x XLR analog audio, 1 x BNC, reference, 1 x 1/4" microphone input

9. Outputs: 4 x BNC, 3G/HD/SD-SDI, talkback program, 1 x BNC, 3G/HD/SD-SDI, program, 1 x BNC, 3G/HD/SD-SDI, Multiview, 1 x BNC, 3G/HD/SD-SDI, auxiliary 1 x HDMI Type A, Multiview, 1 x 1/4" stereo headphone

10. Video Sampling: 10-bit, 4:2:2

11. Color Precision: 10-bit, 4:2:2

12. Color Space: 4:2:2 YUV

Requirement: 1 each

CLIN 0006: Blackmagic Mini Rack Shelf (or equivalent):

1. 1U Mini Rack Shelf for 19" racks

2. Rack-mount up to three mini units side-by-side

Requirement: 1 each

CLIN 0007: Blackmagic GPI and Tally Interface (or equivalent):

1. GPI & Tally Interface for ATEM Production Switchers

2. Displays tallies for indicating the on-air status of video signals

3. 8 contact closure inputs & 8 contact closure outputs

4. Compatible with ATEM switchers and Videohub routers

5. Contact Closure: 25 pin D-type connector providing 8 up to isolated inputs and 8 relay contact closure outputs

6. Inputs: Optical isolators triggered by connection to ground (maximum 5 V @ 14 mA)

7. Outputs: Mechanical relay contact closure to ground (maximum 30 V @ 1 A)

8. Connectivity: 10 / 100 BaseT with loop through for connecting to other Ethernet enabled equipment

CLIN 0008: Blackmagic SFP Optical Module (3G-SDI) (or equivalent):

1. LC fiber optic connection to the Blackmagic Studio Camera

2. Support for both SD and HD Resolutions

3. Fiber Connector: Duplex LC Connectors, Compatible with Singlemode Fiber

4. Form Factor: SFP cage

CLIN 0009: Panasonic 14-42mm f/3.5-5.6 Power Lens (or equivalent):

1. Camera Mount Type: Micro Four Thirds (MFT)

2. Focal Length: 14 - 42mm (Comparable 35 mm Focal Length: 28 – 84 mm)

3. Aperture: Maximum: f/3.5 - 5.6, Minimum: f/22

4. Angle of View : 75° - 29°

5. Minimum Focus Distance: 7.87" (20 cm)

6. Filter Thread: Front: 37 mm

7. Image stabilization

8. Autofocus

CLIN 0010: Pro Cyc System 4 Free Standing Cyclorama System (or equivalent):

1. Suitable for television and film studios, or news sets with 1-6 people

2. Dimensions: 20'2" X 20'2" X 12' with an expanded 4’ corner and 42” Cove

3. Corner Module: 45 degrees; 3'6" radius x 4'

4. Cove Modules: 3'6" radius x 4' wide

5. Flat Modules: 4' x 4' panels

6. Steel Leg Assemblies up to 16'

7. Material: Hi-Impact ABS Plastic

8. Requires factory certified installation including: Sanding, Leg Support Assembly, Assembling a Straight-Wall Cyc, Trimming Cyc to Fit Studio, if necessary, Fastening the

Bottom Edge to the Floor, Finish the Joints and the Tapered Edge at the Floor, Reinforce the Tapered Edge at the Floor, Prime & Paint the Cyclorama, Install Flooring, Cleanup