Requirement_2.docx

1. General maintenance hangar equipment (work shelves and workbenches)

a. 8 each Work shelves Each work shelve shall be 8’ long x 4’ wide x 7’ high and have adjustable shelves.

b. Work tables wide 7 each worktables 96” long x 50” wide x 33” high.

Each worktable needs to have a reversible wooden and rubber top.

c. Work tables 8 each work tables 96” long x 36” wide x 33” high.

Each worktable needs to have a reversible wooden and rubber top.

All general hangar equipment shall comply with the following:

· All equipment shall comply with OSHA (CFR 1910) regulations. The equipment needs to be manufactured out of aluminum in order to make it easy moveable inside the hangar. To ensure long life time, make it recognizable as 302nd Squadron equipment and easy visible the racks shall be powder coated in “Carmel Orange”. On at least two sides all equipment shall be marked “302 SQN” in black paint.

· All equipment shall have an identification plate which shows at least Manufacturer, part number and manufacturing date.

· All equipment shall have directional and locking casters.

· All equipment shall be transportable by a fork lift.

· To ensure future support and commonality all equipment shall be provided by the same vendor. The vendor shall keep a customer file for future support such as repairs, replacement and any additional requirements.

· Vendor needs to install all provided equipment and provide handling instructions at 302nd Squadron facilities, Fort Hood, TX within 5 days of equipment arrival at 302nd SQDN.

· Vendor is responsible for handling and crating of equipment.

All racks shall be ready for pick-up by government arranged transportation at vendor facility no later than 60 days after order confirmation.