Attachment_1_New_MC_Perry_HS_-_2017_PE_Equipment_List.xlsx

ELINS

Very durable ABS Plastic Plates

Very durable ABS Plastic Plates

Each module has 24" sq. non-slip aluminum top surface Large numbers silkscreened on aluminum placards display the place

Structural aluminum planks are welded into individual panels Recessed top for on-site application of synthetic track surface or synthetic turf Panels are custom made to fit your pit and rest on the formed concrete ledge Concrete borders without a pre-formed ledge, can use our APC-LEDGE to create a bearing surface to support our APC panels Insertion removal tools (four included) allow only authorized personnel to adjust panels Optional auxiliary support beams available for high/heavy traffic areas

More economical approach to create a ledge to support pit covers Eliminates the need for contractors to make or buy special forms to create a ledge to accept pit covers Ledge is made of a 2"sq. x .125"wall aluminum extrusion w/ predrilled holes for attachment to long/triple jump pit's concrete wall Rounded profile edges provide a safe border around the pit (see also APC-RE to use in conjunction)

Unlimited Capture time-can be used for Cross Country.

Automatic data interface with Wind Gauges, Scoreboards and raceclocks. (excludes scholastic package) Integrates with all popular track meet software.

Simultaneous Capture and Evaluation on a single computer, eliminates the need for expensive networks.

Designed and built in the USA.

Water Resistant Camera Housing All cameras in all packages are COLOR and powered by the network cable (power over ethernet or "p-o-e"), no AC power needed.

Accurate weight

Lead filled to exact weight

Holds two regulation-sized discii

- Six 2.875" aluminum posts with ground sleeves.

- Weather treated net with quick release clips making it easy to raise and lower the net.

- 13' High posts which meets Nat. H.S. Fed Rules.

• Attached to a wooden dowel

• Red or yellow with white

Structural aluminum planks welded to an elevated aluminum frame

Each module has 24" sq. non-slip aluminum top surface Factory-applied 3/8" rubber top optional (shown left)

Unique poly-top secures shots, discii and/or javelins Implements stay put on-the-go Front swivel semi-pneumatic wheel casters

• Designed to fit most any soccer goal upright

• Premium 72" high foam encased in double-knife coated vinyl

• Military-grade vinyl adjustable straps attach with heavy-duty plastic buckles

• Available in white and yellow, custom colors available upon request

• One pair of pads will equip one soccer goal

• Each bag of 60 clips outfits one pair of Semi-Permanent Soccer Goals or a single Portable Soccer Goal

• 8' x 24' regulation goal nets have 4' top depth & 10' bottom depth

• Polyethylene braided into 5" sq. mesh

• Alternative weight method to sandbags

• Low-profile design, aesthetically pleasing, perfect for your field's game goals

• Vinyl coated, 40 lb. steel weights with integrated hooks to secure groundbar

• Ergonomic handle design cut into weight

• Weights can be chained to back ground bar through handle slot to help further secure to goal

• Bases available spring loaded, ground sleeve or molded dome to be filled with sand

•2 ¼" dia barrel •7046 aluminum-alloy

•2 ¼" dia barrel •7046 aluminum-alloy

•2 ¼" dia barrel •7046 aluminum-alloy

- 6 oz. woven polyethylene.

- Stakes included.

- Silver on one side, white on the other.

- Standard covers have grommets spaced every 3’.

- Standard sizes include stakes to stake them down.

- Designed to break up dirt or cinders on the baseball field or track.

- Designed to hold cement blocks for additional weight.

- With sharpened and hardened steel cutting teeth down, it tears up the dirt. With angle iron down, it levels the playing surface.

- Features forty-six 4-1/2" teeth. The teeth are staggered with 3" gaps and can easily be replaced when worn.

- A heavy-duty chain trails the unit to break up dirt clumps.

• Interior padding wrapped with moisture wicking fabric

• High impact resistant ABS shell with vinyl nitrile padding for professional performance

• Two-tone translucent matte finish

• Lightweight high visibility wire guard with chrome finish

• Fits sizes 7 1/8 - 7 5/8

• Optional fit kit sold separately for smaller sizes

• Includes chin strap

- The protective nets are #36 Twisted, Knotted Nylon, including a rope border and are hand sewn at every mesh

- The softball screen nets are a durable, commercial grade product.

• Includes a tow rope with a wooden handle.

• Steel front attachment bar.

• Solid steel twin bladed cutting edge for shaving off high spots and filling in the low.

• Features a handle grip for easy transport.

• One year guarantee.

- Kit comes with PVTee (27"- 47"), PVTee Low-Stem (20" - 26"), and 1 piece molded rubber base.

- Made from the highest-quality materials, the durable, long-lasting PVTee is designed to withstand the wear and tear of repetitive use by top players.

- With its patent pending design, the PVTee was lab tested with over 4,000 mis-hits showing no wear and tear. This tee was truly; "Meant to be Hit!"

- The PVTee utilizes a unique magnet to allow the Tee to break down in one second and be put in the equipment bag for travel.

- It has a weighted base that holds the tee in place, and its flexible pivot joint allows the impact of a mis-hits to be realized in the pivot joint, not the other tee components.

- The flexible pivot joint also takes the impact away from the batters hands and helps eliminates bat damage.

- The flexible pivot joint will have the tee back to the upright position before you are ready to put the next ball on..

• Pitching frame is constructed of 1 5/8 in. steel.

• Practice pitching pocket is laced with a #60 nylon net to a 1/2 in. bungee cord.

• The frame is protected with vinyl covered foam which is reinforced with grommets.

• Pitching frame sits on 2 removable legs.

• Great pitcher's target for baseball or softball practice.

• Perfect for evaluating a pitcher's accuracy.

• Provide a complete variety of targets for a pitcher to practice pitching, to improve, and help evaluate accuracy.

- Heavy-duty steel frame and rugged molded poly hopper withstand daily wear & tear.

- One-button retractable handle for easy storage in equipment boxes.

- Quick changes between 2" & 4" lines and variable flow control to better monitor chalk usage.

- Rigid poly hopper reduces bridging for more consistent lines.

TRU3 - Explosive Power Transfer 3-piece bat construction S1iD barrel technology Balanced Swing Weight 2 1/4" barrel 7/8" standard handle

100% composite design.

Two-piece bat construction.

Balanced swing weight.

Drop: -12 Fastpitch Bat Barrel: 2 1/4" Handle: 7/8" standard Certified: ASA, ISF approved Barrel Load: Balanced Material: 100% Composite Construction: Two-piece Grip: Synthetic Grip

100% Composite Design (Thermo Composite Technology) Ultra-Thin 29/32" Composite Handle 1.2mm Hyperskin Bat Grip Evenly Balanced Swing Weight 2 1/4" Barrel Diameter -10oz Length to Weight Ratio Approval Certification (98 MPH): 1.20 BPF USSSA, ASA, NSA, ISA, ISF, SSUSA One Year Manufacturer Warranty