List of Specifications - Signals and Electronics Analysis Kit - 12.17.pdf
PDF 89 KB Posted
- Attached to
- DTRA Signals and Electronics Analysis Kit
- Solicitation number
- HDTRA125QAnalysisKit
- Issued by
-
Defense Threat Reduction Agency
About this file
This is a detailed technical specifications document for a Signals and Electronics Analysis Kit that outlines requirements for four main components. The kit requires a Highly Portable Enhanced Radio Frequency Spectrum Analyzer (5x8x2in, 3.0lbs max) with capabilities including 200GHz/sec sweep speed, 10KHz-6GHz operating range, and multiple detection types; a Portable Near-field Detection Receiver (4x6x1in, 1.5lbs max) with -75 dBm sensitivity and touch screen display; a Handheld Non-Linear Junction Detector (60in telescoping extension, 4lbs max) with dual frequency bands and harmonic detection capabilities; and a Portable High Gain Audio Amplifier (8x3x2in, 1lb max) with extensive gain control and filtering options.
All components must operate between -15°F to 125°F, include rechargeable Lithium-Ion batteries, and most require worldwide-compatible power supplies (100-240V/50-60Hz AC). The entire kit must fit in a single hard-sided Pelican case or similar not exceeding 22x14x9in and 30lbs total weight. Technical specifications include detailed requirements for sensitivity, frequency ranges, modulation capabilities, displays, and connectivity options for each component. This appears to be part of a Defense Threat Reduction Agency (DTRA) Request for Information seeking vendors who can provide the TTK - Tactical TSCM Kit or comparable products meeting these specifications.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
LIST OF SPECIFICATIONS
Signals and Electronics Analysis Kit
A list of the required specifications for this kit are as follows:
Highly Portable Enhanced Radio Frequency Spectrum Analyzer
Size: The product must not exceed 5x8x2in Weight: The product must not exceed 3.0lbs Power: The product must have a dual voltage (100-240V/50-60Hz) AC power supply so it can be deployed worldwide. Additionally, the product must include at least two sets of rechargeable Lithium-Ion batteries.
Environment: The product must be able to operate between -15oF to 125oF Capabilities: The product must have:
- A sweep speed of at least 200GHz per second
- Operate within the 10KHz to 6GHz range (or higher if possible)
- Resolution Bandwidth Variable depending on span: 0.0380 kHz to 312.5 kHz
- Instantaneous Bandwidth: 25 MHz
- DANL - Noise Floor: 312.5 kHz RBW with Pre-amp: -90 dBm, 9.765 kHz RBW with Pre-amp: -110dBm
- Attenuation: 0 dB, 10 dB, 20 dB, Auto
- Preamp: +15 dB
- Detection Types: RF, Carrier Current, Acoustic Leakage, IR/Visible Light, Ultrasonic
- Spurious Free Dynamic Range: 81.6 dB
- Receiver Type: Swept-tuned Superheterodyne
- Audio Demodulation AM/FM demodulation with filter options: Auto, 200 kHz, 20 kHz, 5 kHz
- Input Port: QMA connector (RF input) for auxiliary RF antennas
Portable Near-field Detection Receiver
Size: The product must not exceed 4x6x1in Weight: The product must not exceed 1.5lbs Power: The product must operate via rechargeable Lithium-Ion batteries. Additionally, the product must include two sets of rechargeable batteries as well as both internal and external chargers.
Environment: The product must be able to operate between -15oF to 125oF Capabilities: The product must have:
- Sensitivity of -75 dBm for 3 GHz frequency (typical at RF input)
- Stepped attenuation control of -20 dB, -10 dB, off, +15 dB
- Built-in speaker and external headphones with adjustable volume control
- Multiple tone style options (rising pitch, steady tone, off)
- Display: 3.5” (4 cm) capacitive touch screen
- Screen brightness: High, Medium, Low
- INPUT/OUTPUT: USB data port for software upgrades and file transfers
Handheld Non-Linear Junction Detector
**The product must have the capability to detect both small circuitry, as well as older circuitry through light and dense materials.
Size: The product must have a retractable telescoping extension that does not exceed 60in.
Weight: The product must not exceed 4lbs.
Power: The product must have a dual voltage (100-240V/50-60Hz) AC power supply so it can be deployed worldwide. Additionally, the product must include at least two sets of rechargeable Lithium-Ion batteries.
Environment: The product must be able to operate between -15oF to 125oF Capabilities: The product must have:
- Transmitter(s) that operate at 3.2W and 6.6W
- Transmitter Power control: manual or auto control
- Frequency bands 2.4GHz – 2.47GHz and 840MHz – 960MHz
- Transmit modulation: pulsing, digital spread spectrum, 1.25MHz bandwidth.
- Simultaneous 2nd and 3rd harmonic receive
- Digital correlation
- 2.4 antenna frequency band: Second Harmonic (4.8GHz-4.9GHz) and Third Harmonic (7.2GHz-7.4 GHz)
- 900 antenna frequency band: Second Harmonic (1680MHz – 1920MHz) and Third Harmonic (2520MHz – 2880MHz)
- 2.4 antenna sensitivity: -140 dBm for both harmonics
- 900 antenna sensitivity: -130 dBm for both harmonics
- Handle mounted touchscreen controller display
- Antenna mounted display
- Bar graph display for transmit power level, 2nd harmonic level, 3rd harmonic level, data field display, for other information (operation mode, low battery, volume, Digital Signal Processor’s (DSP) gain, etc.)
Portable High Gain Audio Amplifier
Size: The product must not exceed 8x3x2in.
Weight: The product must not exceed 1 lbs.
Power: The product must be battery operated for high portability.
Capabilities: The product must have:
- Input impedance: 50k ohms, common mode rejection > 75dB, maximum usable input: 31 Vp-p (peak to peak voltage)
- Preamp auto attenuator 0 to -40dB (with overload warning LED)
- Bias control: 0 to +/- 14.5V DC, 5mA max
- Maximum input voltage 250V AC/DC (Leakage resistance to case: > 10M ohms
- Manual gain control: 0, 25, 50, 75, 100 dB
- Headphone gain control: 0 – 15 dB
- Maximum system gain: 115 dB Manual mode, 120 dB in Auto mode
- Digital voltmeter: 3.5 Digit, auto zero, auto polarity, +/- 199.9V AC/DC
- Frequency response: No filtering 25Hz – 44kHz, High pass filter 320Hz – 44kHz, Low pass filter 25Hz – 3.2kHz, Ban pass filter 320Hz – 3.2kHz
- Headphone audio output
- Line-out audio output: 600 ohms
Additional Requirement
All of the items listed above must fit into one portable, hard-sided Pelican or similar case. The size of the case must not exceed 22x14x9in and weigh no more than 30lbs, inclusive of all kit items.
File details come from the government source that posted it. Updated .