CED_2E02-B.pdf

INITIATED

1/30/2018

CED

Front End

DEPARTMENT

Minimal Acceptable Standards

REVISION

xx/xx/xx

2E02-B Cart, shopping, wire basket, nesting PAGE 1 of 2

FY16r.05

1 Purpose of this Equipment: To give commissary patrons a large cart to place their grocery selections while shopping.

2 Federal Supply Class: 7290

3 General Operating Specifications:

3.1 Dimensions:

3.1.1 Minimum 16,000 cubic inches upper basket capacity.

3.1.2 Minimum 3,000 cubic inches lower rack capacity.

3.1.3 44 inches long from the front of the basket to the handle with a variance of plus/minus 1.5 inch.

3.1.4 41 inches from the floor to the top of the handle with a variance of plus/minus 1.5 inch.

3.1.5 Dimension’s to be between 23 and 24.5 inches wide.

3.2 Salient Characteristics that shall be provided:

3.2.1 Base frame constructed of steel tubing.

3.2.2 Upper basket constructed of close mesh steel wire.

3.2.3 Powder coated finish.

3.2.4 Lower/bottom rack constructed of steel rods.

3.2.5 Wheels:

3.2.5.1 Solid rubber made with materials that reduce static electrical charges.

3.2.5.2 Sealed ball bearings.

3.2.5.3 Replaceable, not riveted.

3.2.5.4 Two swivel front casters; two rigid rear casters.

3.2.5.5 Minimum 5 inches in diameter.

3.2.6 The word “COMMISSARY” centered and imprinted in white letters on a blue handle.

3.2.7 A blue folding baby seat that meets ASTM standards.

3.2.8 Child’s safety belt that meets ASTM standards.

3.2.9 Carts to nest with 13 inches between handles with a variance of plus or minus (1) inch.

3.3 Industry Standards / Requirement(s):

3.3.1 Shopping cart, child safety belt and seat to conform to ASTM F2372-15 or most current ASTM standard.

3.3.2 Warranty period shall be for (1) year from date of delivery against defective material and workmanship and shall include parts, service and labor.

INITIATED

1/30/2018

CED

Front End

DEPARTMENT

Minimal Acceptable Standards

REVISION

xx/xx/xx

2E02-B Cart, shopping, wire basket, nesting PAGE 2 of 2

FY16r.05

3.4 Information Technology requirements: N / A

3.5 Color Requirement(s): Grey

4 Electrical Requirements: N / A

5 Standard Contractor Requirements:

5.1 Must be shipped ready to use.

5.2 Information to be provided by the Contractor to the commissary at the time of delivery:

5.2.1 Point of Contact for Service

5.2.2 Installation and Operating Instructions

5.2.3 Parts List

5.3 Maintenance Sustainability Requirements: Continued parts support is required for the projected life cycle of the equipment plus 5 years.

6 Special Coordinating / Safety Instructions: N / A