CED_2ROE00.docx

INITIATED

06/06/16

CED

ADMINISTRATION

DEPARTMENT

Minimal Acceptable Standards

REVISION

xx/xx/xx

Purpose of this Equipment: To perform routine accounting calculations.

1 Federal Supply Class: 7420

2 General Operating Specifications:

2.1 Dimensions:

2.1.1 Dimensional sizes, such as length, width, and height are not critical to this equipment so long as this equipment is a portable desk model.

2.2 Salient Characteristics that shall be provided:

2.2.1 12 digit display

2.2.2 Round up and round down functions

2.2.3 Decimal settings: +, 0, 1, 2, 3, 4, 6, with decimal override (floating decimal)

2.2.4 Memory capabilities

2.2.5 Print in black and red

2.2.6 Uses 2.25 inch paper rolls

2.3 Industry Standards / Requirement(s):

2.3.1 Industry Standards: Underwriters Laboratory (UL) listed, or approved equivalent. CE is not acceptable for a standard.

2.3.2 Warranty period shall be for a minimum of six months from date of delivery/installation against defective material and workmanship and shall include parts, service and labor.

2.4 Information Technology requirements: N / A

2.5 Color Requirement(s): N / A

3 Electrical Requirements:

3.1 Standard U.S.A. electrical specifications: 120 Volts, 60 Hertz, 1 phase.

3.2 _____ Pacific Theater stores 120 V / 50 HZ / 1 PH (Applies to these stores only: Atsugi, Misawa, Sagami, Sagamihara, Yokosuka, Yokota, Camp Zama, and Kanto Plains CDC. All other stores are standard U.S.A. 60 cycle voltages.)

3.3 Minimum 6 foot cord with a NEMA Standard plug, or a manufacturer’s equivalent to comply with the equipment plug in requirements.

3.4 NOTE: the operating range for 120 volts is 110 to 120 volts; the operating range for 220 volts is 208 to 230 volts.

Standard Contractor Requirements:

3.5 Must be shipped ready to, plug in and use

3.6 Information to be provided by the Contractor to the commissary at the time of delivery:

3.6.1 Point of Contact for Service

3.6.2 Installation and Operating Instructions

3.6.3 Parts List

3.7 Maintenance Sustainability Requirements: Continued parts support is required for the projected life cycle of the equipment plus 5 years.

Special Coordinating / Safety Instructions: N / A

STORE ORDER REQUEST

STORE NAME: __________________________ DODAAC: ____________________

QUANTITY: _______

FY16r.01 image1.jpeg