409R0006 Wooden Displays.doc

Section SF 1449 - CONTINUATION SHEET

ADDENDUM 52.212-1

ADDENDUM TO 52.212-1

INSTRUCTIONS TO OFFERORS – COMMERCIAL ITEMS

I. SUBMISSION OF OFFERS: [(Reference Paragraph (b)]

a. Proposals are to be submitted to the Defense Commissary Agency, Equipment Branch, Attn: Bob Stuyck, 1300 E. Ave, Fort Lee, VA 23801-1800. No faxed scanned or e-mail copies will be accepted (except see b.3 below). The complete proposal with authorized representative’s signature must be received by the closing date and time.

b. The offeror’s proposal shall address the evaluation factors in 52.212-2 and provide the following information:

1. Product Information: Submit descriptive literature, a matrix, or other information that demonstrates that the proposed product meets all the mandatory general and operational characteristics of Commissary Equipment Description (CEDs) referenced in each line item.

2. CED Listing Access: The Defense Commissary Agency Commercial Equipment Description CED numbers for the wooden display merchandisers CLINS 0001 through 0032 are at www.commissaries.com. Access by clicking on; “about us”, “Business with DeCA”, “Equipment”, “Automated Commissary Equipment Description ACED”, “Search For CEDs”, “Choose a Department”, then select “Bakery, Grocery, and Produce” for CED numbers referenced in each line item.

3. Past Performance References: Submit at least 5 references; companies that you have conducted business with for delivery of products that are similar to those listed in this solicitation. Please fax your list of references to DOA inbox at 804-734-8000 extention 78886. Fax by dialing 804-734-8009, Pause, Pause, 78886. Please ensure that you put, Attention Bob Stuyck, in the fax description line. Provide the following information for each reference no later than February 05, 2009.

(1) Delivery Period

(2) Company Name and Address

(3) Point of Contact Name and Title

(4) Phone Number

(5) Facsimile Number

(6) E-Mail Address

(7) Description of Product Delivered

The references will be asked to provide information on your company’s past performance with regard to timeliness of delivery, quality of products, and business relations. The contracting officer will contact the references provided to obtain this information. Any other past performance information available to the contracting officer will also be considered.

4. Price; Offeror shall propose pricing for all CLINS and sub-CLINS.

II. PERIOD FOR ACCEPTANCE OF OFFERS: [(Reference Paragraph (c)]

Change minimum acceptance period to 90 days.

ADDENDUM 52.212-2

52.212-2 EVALUATION--COMMERCIAL ITEMS (JAN 1999)

The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers:

1. Product

2. Past Performance

(a) Timeliness

(b) Quality of Products

(c) Business Relations

3. Price

b. Award will be made to the lowest-priced technically acceptable offeror. Offerors will be determined to be technically acceptable if their proposed product is rated acceptable, and by receiving a satisfactory overall rating in the past performance evaluation factor. For the proposed product to be acceptable, the offeror's product must meet or exceed the stated general and operational characteristics. Total evaluated price will be determined by applying each offeror’s unit price to the estimated quantity per CLIN, and totaling all CLINs for a total evaluated price, for the base and both option periods. For evaluation purposes only the Government will include an estimated price of $1,000.00 in the shipping CLIN for all offerors. Award will be made on an all or none basis.

c. The evaluation of past performance will be an assessment based on a consideration of all relevant facts and circumstances. It will not be based on absolute standards of acceptable performance, but an offeror's overall past performance history. The Government is seeking to determine whether the offeror has consistently demonstrated a genuine concern for customer satisfaction, and timely delivery of quality goods. This determination is a matter of judgment.

d. Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

e. A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. The Government reserves the right to award without discussions.

ADDENDUM 52.212-4

ADDENDUM TO 52.212-4

TERMS AND CONDITIONS – COMMERCIAL ITEMS

The following paragraphs have been changed/added to FAR 52.212-4 Terms and Conditions – Commercial Items.

A. Administrative Modifications:

The Government may issue unilateral written modifications that do not affect the substantive rights of the parties. Examples of administrative modifications are corrections in the payment office address or changes to the accounting and appropriation data.

B. Payment Procedures:

Payment will be made with the Government Purchase Card (GPC). The GPC will not be charged until the entire order has been received at the delivery location. Delivery orders will be issued and accessed through the Electronic Document Access System (EDA). The contractor shall submit the invoice to the address designated in the individual delivery order. No payments will be charged to the GPC cardholder’s account without express written authorization. The contractor shall include the contract and delivery order number (Blocks 2 and 4 of the SF 1449) in the second level data field when entering each charge to ensure the charge is easily identifiable on the Government’s credit card statement and can be matched with the applicable order.

Clause 252.232-7003, entitled Electronic Submission of Payment Requests (May 2006), is included in this contract. The payment procedures stated in the paragraph, above, will apply at the time of contract startup; however, it is likely that in order to comply with advances in electronic commerce procedures, including Wide Area Work Flow (WAWF), the method for payment and the paying office will change during the contract performance. If during the period of performance of this contract, the Contracting Officer determines that DECA (including stores) and the contractor have mutual capability to comply with new electronic commerce procedures, including WAWF, the Contracting Officer may require the contractor to convert to electronic procedures; the Contractor will be provided a 30 day advance notice before the effective date for compliance. Conversion will be at no additional cost to the government.

C. Period of Performance:

Base Year:

April 1, 2009 or date of award if later, through March 31, 2010

Option Year 1:

April 1, 2010 through March 31, 2011

Option Year 2:

April 1, 2011 through March 31, 2012

D. Delivery:

Delivery is required 30 days after receipt of delivery order. Delivery to commissaries shall be made between the hours of 7:00 am and 3:00 pm local time, Monday through Friday, excluding official Government Holidays.

Shipping: FOB Destination within the continental United States. The contractor shall charge for shipment of each order as a charge separate from the cost of the product (see schedule). The contractor will be paid for actual shipping charges supported by a copy of a prepaid freight/shipping bill. Some delivery locations may require packaging and preparation for overseas shipment, but the contractor is responsible only for shipment to the port. Floor cleaning equipment destined for overseas shipment will be wrapped, blocked, and braced using best commercial practices so that the machine arrives at destination without damage. Each Outside Continental United States (OCONUS) delivery order will include packing and marking instructions to the shipping port specified in the order.

Table w/rear shelf

FFP

Base April 1, 2009, through March 31, 2010

CED 2B04

FOB: Destination

ESTIMATED

NET AMT

Table w/drop leaves

Base April 1, 2009, through March 31, 2010

CED 2B07-A

ESTIMATED

Island Display

Base April 1, 2009, through March 31, 2010

CED 2B07-B

ESTIMATED

Island Display

Base April 1, 2009, through March 31, 2010

CED 2B07-C

ESTIMATED

Table double-sided w/shelf

Base April 1, 2009, through March 31, 2010

CED 2B07-D

ESTIMATED

Wall Merchandiser 4'

Base April 1, 2009, through March 31, 2010

CED 2B08-A

ESTIMATED

Wall Merchandiser 8'

Base April 1, 2009, through March 31, 2010

CED 2B08-B

ESTIMATED

Display Upright 5 shelf

Base April 1, 2009, through March 31, 2010

CED 2B011-A

ESTIMATED

Display Upright 6 shelf

Base April 1, 2009, through March 31, 2010

CED 2B011-B

ESTIMATED

Table Demonstration w/electric

Base April 1, 2009, through March 31, 2010

CED 2G01

ESTIMATED

Table Island w/shadow box

Base April 1, 2009, through March 31, 2010

CED 1P16-09

ESTIMATED

Display Floral Island System

Base April 1, 2009, through March 31, 2010

CED 2P02-A

ESTIMATED

Display Floral Modular System

Base April 1, 2009, through March 31, 2010

CED 2P02-D

ESTIMATED

Display Floral Wall Grid System

Base April 1, 2009, through March 31, 2010

CED 2P02-H

ESTIMATED

Display Bin, potato & onion

Base April 1, 2009, through March 31, 2010

CED 2P06

ESTIMATED

Table Tilt-top Euro style

Base April 1, 2009, through March 31, 2010

CED 2P08-A

ESTIMATED

Table Tilt-top Euro style

Base April 1, 2009, through March 31, 2010

CED 2P08-C

ESTIMATED

Table Tilt-top Euro style

Base April 1, 2009, through March 31, 2010

CED 2P08-H

ESTIMATED

Bin Orchard w/ice reservoir

Base April 1, 2009, through March 31, 2010

CED 2P16-A

ESTIMATED

Bin Orchard

Base April 1, 2009, through March 31, 2010

CED 2P16-B

ESTIMATED

Cart display

Base April 1, 2009, through March 31, 2010

CED 2P20-A

ESTIMATED

Cart display 6-step

Base April 1, 2009, through March 31, 2010

CED 2P20-B

ESTIMATED

Cart display 6-step retractable

Base April 1, 2009, through March 31, 2010

CED 2P20-C

ESTIMATED

Cart display Wagon style

Base April 1, 2009, through March 31, 2010

CED 2P20-D

ESTIMATED

Display end cap 72"

Base April 1, 2009, through March 31, 2010

CED 2P21-B

ESTIMATED

Display end cap 84"

Base April 1, 2009, through March 31, 2010

CED 2P21-C

ESTIMATED

Table end cap Euro style 81"

Base April 1, 2009, through March 31, 2010

CED 2P22-B

ESTIMATED

Table end cap Euro style 72"

Base April 1, 2009, through March 31, 2010

CED 2P22-E

ESTIMATED

Table end cap Euro style 94"

Base April 1, 2009, through March 31, 2010

CED 2P23-B

ESTIMATED

Table end cap Euro style 96"

Base April 1, 2009, through March 31, 2010

CED 2P23-C

ESTIMATED

Merchandiser bulk

Base April 1, 2009, through March 31, 2010

CED 2P25

ESTIMATED

Case decorative

Base April 1, 2009, through March 31, 2010

CED 2P26

NET AMT

Shipping

Contractor will only be paid for actual shipping charges as supported by a copy of prepaid freight/shipping bill.

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

ESTIMATED

FFP

First Option Period April 1, 2010, through March 31, 2011

NET AMT

FFP

First Option Period April 1, 2010, through March 31, 2011

Contractor will only be paid for actual shipping charges as supported by a copy of prepaid freight/shipping bill.

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

ESTIMATED

FFP

Second Option Period April 1, 2011, through March 31, 2012

NET AMT

FFP

Second Option Period April 1, 2011, through March 31, 2012

Contractor will only be paid for actual shipping charges as supported by a copy of prepaid freight/shipping bill.

ESTIMATED

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

52.204-4500

INSTALLATION ACCESS REQUIREMENTS (DEC 2001)

The contractor is responsible for ensuring compliance with installation access procedures for both personnel and vehicles.

CLAUSES INCORPORATED BY FULL TEXT

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (JUN 2008) ALTERNATE I (APR 2002)

An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (b) through (i) of this provision.

(a) Definitions. As used in this provision:

"Emerging small business" means a small business concern whose size is no greater than 50 percent of the numerical size standard for the NAICS code designated.

"Forced or indentured child labor" means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Manufactured end product” means any end product in Federal Supply Classes (FSC) 1000-9999, except—

(1) FSC 5510, Lumber and Related Basic Wood Materials;

(2) Federal Supply Group (FSG) 87, Agricultural Supplies;

(3) FSG 88, Live Animals;

(4) FSG 89, Food and Related Consumables;

(5) FSC 9410, Crude Grades of Plant Materials;

(6) FSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) FSC 9610, Ores;

(9) FSC 9620, Minerals, Natural and Synthetic; and

(10) FSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person conducting the business can demonstrate--

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

Service-disabled veteran-owned small business concern--

(1) Means a small business concern--

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

"Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

Veteran-owned small business concern means a small business concern--

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

"Women-owned small business concern" means a small business concern--

(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; or

(2) Whose management and daily business operations are controlled by one or more women.

"Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

(b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the Online Representations and Certifications Application (ORCA) website.

(2) The offeror has completed the annual representations and certifications electronically via the ORCA website at http://orca.bpn.gov. After reviewing the ORCA database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications--Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ----------.

(Offeror to identify the applicable paragraphs at (c) through (m) of this provision that the offeror has completed for the purposes of this solicitation only, if any.)

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on ORCA.]

(c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that it ( ) is, ( ) is not a small business concern.

(2) Veteran-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents as part of its offer that it ( ) is, ( ) is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. (Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.) The offeror represents as part of its offer that it ( ) is, ( ) is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents, for general statistical purposes, that it ( ) is, ( ) is not a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ) is, ( ) is not a women-owned small business concern.

Note: Complete paragraphs (c)(6) and (c)(7) only if this solicitation is expected to exceed the simplified acquisition threshold.

(6) Women-owned business concern (other than small business concern). (Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ) is, a women-owned business concern.

(7) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:

(8) Small Business Size for the Small Business Competitiveness Demonstration Program and for the Targeted Industry Categories under the Small Business Competitiveness Demonstration Program. (Complete only if the offeror has represented itself to be a small business concern under the size standards for this solicitation.)

(i) (Complete only for solicitations indicated in an addendum as being set-aside for emerging small businesses in one of the designated industry groups (DIGs).) The offeror represents as part of its offer that it ( ) is, ( ) is not an emerging small business.

(ii) (Complete only for solicitations indicated in an addendum as being for one of the targeted industry categories (TICs) or designated industry groups (DIGs).) Offeror represents as follows:

(A) Offeror's number of employees for the past 12 months (check the Employees column if size standard stated in the solicitation is expressed in terms of number of employees); or

(B) Offeror's average annual gross revenue for the last 3 fiscal years (check the Average Annual Gross Number of Revenues column if size standard stated in the solicitation is expressed in terms of annual receipts).

(Check one of the following):

Average Annual

Number of Employees Gross Revenues

___ 50 or fewer ___ $1 million or less

___ 51 - 100 ___ $1,000,001 - $2 million

___ 101 - 250 ___ $2,000,001 - $3.5 million

___ 251 - 500 ___ $3,500,001 - $5 million

___ 501 - 750 ___ $5,000,001 - $10 million

___ 751 - 1,000 ___ $10,000,001 - $17 million

___ Over 1,000 ___ Over $17 million

(9) (Complete only if the solicitation contains the clause at FAR 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns or FAR 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting, and the offeror desires a benefit based on its disadvantaged status.)

(i) General. The offeror represents that either--

(A) It ( ) is, ( ) is not certified by the Small Business Administration as a small disadvantaged business concern and identified, on the date of this representation, as a certified small disadvantaged business concern in the database maintained by the Small Business Administration (PRO-Net), and that no material change in disadvantaged ownership and control has occurred since its certification, and, where the concern is owned by one or more individuals claiming disadvantaged status, the net worth of each individual upon whom the certification is based does not exceed $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); or

(B) It ( ) has, ( )( has not submitted a completed application to the Small Business Administration or a Private Certifier to be certified as a small disadvantaged business concern in accordance with 13 CFR 124, Subpart B, and a decision on that application is pending, and that no material change in disadvantaged ownership and control has occurred since its application was submitted.

(ii) Joint Ventures under the Price Evaluation Adjustment for Small Disadvantaged Business Concerns. The offeror represents, as part of its offer, that it is a joint venture that complies with the requirements in 13 CFR 124.1002(f) and that the representation in paragraph (c)(9)(i) of this provision is accurate for the small disadvantaged business concern that is participating in the joint venture. (The offeror shall enter the name of the small disadvantaged business concern that is participating in the joint venture: ____________.)

(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that--

(i) It ( ) is, ( ) is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material change in ownership and control, principal office, or HUBZone employee percentage has occurred since it was certified by the Small Business Administration in accordance with 13 CFR part 126; and

(ii) It ( ) is, ( ) is not a joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for the HUBZone small business concern or concerns that are participating in the joint venture. (The offeror shall enter the name or names of the HUBZone small business concern or concerns that are participating in the joint venture:____________.) Each HUBZone small business concern participating in the joint venture shall submit a separate signed copy of the HUBZone representation.

(11) (Complete if the offeror has represented itself as disadvantaged in paragraph (c)(4) or (c)(9) of this provision.) (The offeror shall check the category in which its ownership falls):

____Black American.

____Hispanic American.

____Native American (American Indians, Eskimos, Aleuts, or Native Hawaiians).

____Asian-Pacific American (persons with origins from Burma, Thailand, Malaysia, Indonesia, Singapore, Brunei, Japan, China, Taiwan, Laos, Cambodia (Kampuchea), Vietnam, Korea, The Philippines, U.S. Trust Territory of the Pacific Islands (Republic of Palau), Republic of the Marshall Islands, Federated States of Micronesia, the Commonwealth of the Northern Mariana Islands, Guam, Samoa, Macao, Hong Kong, Fiji, Tonga, Kiribati, Tuvalu, or Nauru).

____Subcontinent Asian (Asian-Indian) American (persons with origins from India, Pakistan, Bangladesh, Sri Lanka, Bhutan, the Maldives Islands, or Nepal).

____Individual/concern, other than one of the preceding.

(d) Certifications and representations required to implement provisions of Executive Order 11246--

(1) Previous Contracts and Compliance. The offeror represents that--

(i) It ( ) has, ( ) has not, participated in a previous contract or subcontract subject either to the Equal Opportunity clause of this solicitation, the and

(ii) It ( ) has, ( ) has not, filed all required compliance reports.

(2) Affirmative Action Compliance. The offeror represents that--

(i) It ( ) has developed and has on file, ( ) has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR Subparts 60-1 and 60-2), or

(ii) It ( ) has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.

(e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $100,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.

(f) Buy American Act--Balance of Payments Program Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American Act--Balance of Payments Program--Supplies, is included in this solicitation.)

(1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. The terms ``component,'' ``domestic end product,'' ``end product,'' ``foreign end product,'' and ``United States'' are defined in the clause of this solicitation entitled ``Buy American Act--Supplies.''

(2) Foreign End Products:

Line Item No.:---------------------------------------------------------

Country of Origin:-----------------------------------------------------

(List as necessary)

(3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.

(g)

(1) Buy American Act -- Free Trade Agreements -- Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American Act -- Free Trade Agreements -- Israeli Trade Act, is included in this solicitation.)

(i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms “Bahrainian or Moroccan end product,” “component,” “domestic end product,” “end product,” “foreign end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “Israeli end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American Act--Free Trade Agreements--Israeli Trade Act.”

(ii) ) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian or Moroccan end products) or Israeli end products as defined in the clause of this solicitation entitled ``Buy American Act--Free Trade Agreements--Israeli Trade Act'':

Free Trade Agreement Country End Products (Other than Bahrainian or Moroccan End Products) or Israeli End Products:

Line Item No.

[List as necessary]

(iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) or this provision) as defined in the clause of this solicitation entitled “Buy American Act—Free Trade Agreements—Israeli Trade Act.” The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products.

Other Foreign End Products:

[List as necessary]

(iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.

(2) Buy American Act—Free Trade Agreements—Israeli Trade Act Certificate, Alternate I (Jan 2004). If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled “Buy American Act—Free Trade Agreements—Israeli Trade Act”:

Canadian End Products:

Line Item No.:

[List as necessary]

(3) Buy American Act—Free Trade Agreements—Israeli Trade Act Certificate, Alternate II (Jan 2004). If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled ``Buy American Act--Free Trade Agreements--Israeli Trade Act'':

Canadian or Israeli End Products:

(4) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.)

(i) The offeror certifies that each end product, except those listed in paragraph (g)(4)(ii) of this provision, is a U.S.-made or designated country end product as defined in the clause of this solicitation entitled “Trade Agreements.”

(ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products.

Other End Products

(iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American Act. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation.

(h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals--

(1) ( ) Are, ( ) are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency; and

(2) ( ) Have, ( ) have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: Commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or Commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property; and

(3) ( ) Are, ( ) are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and

(4) [ballot] Have, [ballot] have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,000 for which the liability remains unsatisfied.

(i) Taxes are considered delinquent if both of the following criteria apply:

(A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted.

(B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded.

(ii) Examples.

(A) The taxpayer has received a statutory notice of deficiency, under I.R.C. Sec.