HC102824R0083.pdf

PDF 1 MB Posted

Attached to
JITC Cabling and IT Supplies
Solicitation number
832469791
Issued by

About this file

This document is a Request for Quotation (RFQ) issued by the Defense Information Systems Agency (DISA) to support the Joint Interoperability Test Command's (JITC) requirement for cabling and miscellaneous IT supplies. The solicitation includes a detailed list of the required equipment and products, including wire labels, printers, ladders, carts, cables, and other networking and IT components. All items are brand name or equal.

The quotation due date is August 20, 2024, and delivery is required within 45 days of order. The award will be made on a Lowest Price Technically Acceptable basis. The solicitation is set aside for small businesses. Evaluation factors include technical compliance and pricing, with all items in the attached list required to be addressed for a quotation to be considered. No incumbent information is provided.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SEE ADDENDUM

(No Collect Calls)

HC102824R0083 13-Aug-2024

b. TELEPHONE NUMBER

618-418-6603

8. OFFER DUE DATE/LOCAL TIME

02:00 PM 20 Aug 2024

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

HC10289. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

MARK E. KRAFT

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

DISA/DITCO-SCOTT-PL83

2300 EAST DRIVE, BUILDING 3600

SCOTT AFB IL 62225-5406

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE HC1046 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

DISA JITC

6906 COOPER AVENUE

FORT MEADE MD 20755

MATTHEW FANNING

TEL: 301-225-9232 FAX:

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

1,250

NAICS:

334111

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF81

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

HC102824R0083

Section SF 1449 - CONTINUATION SHEET

CABLING AND IT SUPPLY LIST

All Items are Brand Name or Equal

MANUFACTURER

NAME

MANUFACTURER

PART NUMBER DESCRIPTION QTY

UNIT

OF

ISSUE

COST

PER

ITEM TOTAL

Brady THT-9-417-10

3" Core High Adhesion Self- Laminating Vinyl Wire and Cable Labels 4 EA

Brady R4307

Thermal Transfer 1" Core R4300 Series Halogen Free Printer Ribbon, 4.33" 4 EA

Brady 149050

Brady Printer i7100 300dpi Industrial Label Printer with Product and Wire ID Software Suite 1 EA

U-Line UHRE115SS01A 15" Class 1 Refrigerator, Black 1 EA

Chief K1S120B

Universal Slat Wall Height- Adjustable Swing Arm Mount, Black 80 EA

HP C9383A

HP 72, (C9383A)

CYAN/MAGENTA

PRINTHEAD 2 EA

HP C9384A

HP 72, (C9384A) MATTE

BLACK/YELLOW

PRINTHEAD 2 EA

HP C9380A

HP 72, (C9380A)

GRAY/PHOTO BLACK

PRINTHEAD 2 EA

WERNER FMRBP6208

8FT FIBERGLASS

PLATFORM Ladder 4 EA

WERNER FMRBPD7306

6FT 375LBS FIBERGLASS

PLATFORM Ladder 4 EA

YICHANG

TORCHEARTH

TECHNOLOGY

CO.,LTD HB-GB19

Data Rack/Cabinet/Enclosure (Copper Ground Busbar 19 Inch) kit 100 EA

Pro Wire & Cable 108438

6 AWG; THHN/Plenum;

Stranded Grounding Wire, Green, 500ft reel 1 EA

VALLEY CRAFT F84879A7

MINI PALLET TRUCK

W/BRAKES -STEEL 1 EA

ABILITYONE 8415016107324 WORK GLOVES (5 Pack) 1 PK

SKILCRAFT 6645-01-491-9814

ATOMIC WALL CLOCK;

Black, 12" Diameter 4 EA

MENSCH

SUPPLY H-DOME-18

INDOOR & OUTDOOR

HALF DOME Mirror; 18" Diameter 1 EA

MENSCH

SUPPLY H-DOME-32

INDOOR & OUTDOOR

HALF DOME Mirror; 32" Diameter 2 EA

Master Lock 3DLF Master Locks with 1.5" clearance 200 EA

KabelDirekt 272

HDMI Cable 4K – 50ft – with A.I.S (anti-interference shielding) Shielding 10 EA

Uline H-3325BL Uline Flat Shelf Utility Cart - 44 x 25 x 33", Black 2 EA

Uline H-2505BL

Uline Utility Cart with Pneumatic Wheels - 45 x 25 x 37", Black 2 EA

Uline H-1191

WOOD PLATFORM

TRUCKS (24x48) 1 EA

BRAND

MANAGEMENT

GROUP HEWC6020B

HP Bright White 36"x150' paper rolls 10 EA

Avery 5162

Avery 5162 Laser Labels, Mailing,1-1/3-Inch x4-Inch , 1400/BX, White 10 BX

LOUISVILLE FS1502

FIBERGLASS HEAVY

DUTY STEP LADDER, 26"

WORKING HEIGHT, 300

LBS CAPACITY, 2 STEP 1 EA

RUBBERMAID RCP9T6571BG

Three-Shelf Service Cart w/Brushed Aluminum Upright, 16.25w x 31.5d x 36h, Beige 1 EA

Uline H-633 Bolt Cutter - 24" 1 EA

Uline H-1342 Bolt Cutter - 36" 1 EA

Energizer FMRBEVEE91BP24 BATTERY,MAX,AA,24/PK 20 PK

FXAVA B0B1TMFLHG

USB 3.0 Extension Cable 25 ft, USB A Male to USA A Female 50 EA

Tripp Lite P018-006

6ft Computer Power Cord Cable C14 to C15 Heavy Duty 15A 14AWG 50 EA

APC AC2-6

C14 TO C13 15A/250V 14/3

SJT, 6FT 100 EA

KENDALL

HOWARD 0100-3-300-02

M5 RACK SCREWS - 2500

PACK 2 PK

CommScope

FDXL1LC42-

GXF010

2 Fiber, OM4, Multimode, LC Keyed Red to LC Duplex, 1.6mm, Plenum, Red, 10' 50 EA

CommScope

FDXL4LC42-

CXF010

2 Fiber, OM4, Multimode, LC Keyed Green to LC Duplex, 1.6mm, Plenum, Green, 10' 30 EA

Zero Connect

MC64M5SB-

SBF003

CAT6 Green 3' Patch Cords Snagless Boots 150 EA

Zero Connect

MC64M5SB-

SBF005

CAT6 Green 5' Patch Cords Snagless Boots 100 EA

Zero Connect

MC64M5SB-

SBF007

CAT6 Green 7' Patch Cords Snagless Boots 150 EA

ENET

ENMC-FGET-

SFPBXD

10/100/1000M RJ45 to 1G SX SFP Ethernet Fiber Multi-Mode Media Converters 30 EA

Platinum Tools Inc. 100010C

CAT6 EZ-RJ45 Modular Plugs, 50-Pack 30 PK

Zero Connect TAAP42D1-1-01GR

LC UPC to LC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Green Jacket Color, 1Meter - TAA 44 EA

Zero Connect TAAP42D1-1-02GR

LC UPC to LC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Green Jacket Color, 2Meter - TAA 36 EA

Zero Connect TAAP42D1-1-03GR

LC UPC to LC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Green Jacket Color, 3Meter - TAA 26 EA

Zero Connect TAAP42D1-1-05GR

LC UPC to LC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Green Jacket Color, 5Meter - TAA 20 EA

Zero Connect TAAP42D1-1-07GR

LC UPC to LC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Green Jacket Color, 7Meter - TAA 19 EA

Zero Connect TAAP42D1-1-10GR

LC UPC to LC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Green Jacket Color, 10Meter - TAA 27 EA

Zero Connect TAAP42D1-1-20GR

LC UPC to LC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Green Jacket Color, 20Meter - TAA 55 EA

Zero Connect TAAP42D1-1-30GR

LC UPC to LC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Green Jacket Color, 30Meter - TAA 12 EA

Zero Connect TAAP12D1-1-01GR

LC UPC to LC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Green Jacket Color, 1Meter - TAA 26 EA

Zero Connect TAAP12D1-1-02GR

LC UPC to LC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Green Jacket Color, 2Meter - TAA 40 EA

Zero Connect TAAP12D1-1-03GR

LC UPC to LC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Green Jacket Color, 3Meter - TAA 20 EA

Zero Connect TAAP12D1-1-05GR

LC UPC to LC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Green Jacket Color, 5Meter - TAA 35 EA

Zero Connect TAAP12D1-1-07GR

LC UPC to LC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Green Jacket Color, 7Meter - TAA 31 EA

Zero Connect TAAP12D1-1-10GR

LC UPC to LC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Green Jacket Color, 10Meter - TAA 70 EA

Zero Connect TAAP12D1-1-20GR

LC UPC to LC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Green Jacket Color, 20Meter - TAA 27 EA

Zero Connect TAAP12D1-1-30GR

LC UPC to LC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Green Jacket Color, 30Meter - TAA 45 EA

Zero Connect TAAP12D1-1-40GR

LC UPC to LC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Green Jacket Color, 40Meter - TAA 30 EA

Zero Connect TAAP12D3-3-30GR

SC UPC to SC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Green Jacket Color, 30Meter - TAA 14 EA

Zero Connect TAAP12D1-3-30GR

LC UPC to SC UPC, Single Mode, OS2, OSPF Plenum, Color, 30Meter - TAA 15 EA

Zero Connect TAAP12D1-3-20GR

LC UPC to SC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Green Jacket Color, 20Meter - TAA 20 EA

Zero Connect TAAP12D1-3-10GR

LC UPC to SC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Green Jacket Color, 10Meter - TAA 24 EA

Zero Connect TAAP12D1-3-10GR

LC UPC to SC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Green Jacket Color, 3Meter - TAA 20 EA

Zero Connect TAAP12D1-3-10GR

LC UPC to SC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Green Jacket Color, 2Meter - TAA 30 EA

Zero Connect TAAP42D3-3-30GR

SC UPC to SC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Green Jacket Color, 30Meter - TAA 21 EA

Zero Connect TAAP42D3-3-20GR

SC UPC to SC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Green Jacket Color, 20Meter - TAA 20 EA

Zero Connect TAAP42D3-3-10GR

SC UPC to SC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Green Jacket Color, 10Meter - TAA 21 EA

Zero Connect TAAP42D3-3-07GR

SC UPC to SC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Green Jacket Color, 7Meter - TAA 25 EA

Zero Connect TAAP42D3-3-05GR

SC UPC to SC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Green Jacket Color, 5Meter - TAA 25 EA

Zero Connect TAAP42D1-3-30GR

LC UPC to SC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Green Jacket Color, 30Meter - TAA 20 EA

Zero Connect TAAP42D1-3-20GR

LC UPC to SC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Green Jacket Color, 20Meter - TAA 23 EA

Zero Connect TAAP42D1-3-10GR

LC UPC to SC UPC, Mulit Mode, OM4, OSPF Plenum, Color, 10Meter - TAA 39 EA

Zero Connect TAAP42D1-3-07GR

LC UPC to SC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Green Jacket Color, 7Meter - TAA 7 EA

Zero Connect TAAP42D1-3-05GR

LC UPC to SC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Green Jacket Color, 5Meter - TAA 14 EA

Zero Connect TAAP42D1-3-03GR

LC UPC to SC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Green Jacket Color, 3Meter - TAA 33 EA

Zero Connect TAAP42D1-3-30RD

LC UPC to SC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Red Jacket Color, 30Meter - TAA 33 EA

Zero Connect TAAP42D1-3-20RD

LC UPC to SC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Red Jacket Color, 20Meter - TAA 48 EA

Zero Connect TAAP42D1-3-10RD

LC UPC to SC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Red Jacket Color, 10Meter - TAA 24 EA

Zero Connect TAAP42D1-3-07RD

LC UPC to SC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Red Jacket Color, 7Meter - TAA 17 EA

Zero Connect TAAP42D1-3-05RD

LC UPC to SC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Red Jacket Color, 5Meter - TAA 21 EA

Zero Connect TAAP42D1-3-03RD

LC UPC to SC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Red Jacket Color, 3Meter - TAA 12 EA

Zero Connect TAAP42D1-3-02RD

LC UPC to SC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Red Jacket Color, 2Meter - TAA 31 EA

Zero Connect TAAP42D1-3-01RD

LC UPC to SC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Red Jacket Color, 1Meter - TAA 28 EA

Zero Connect TAAP42D1-1-30RD

LC UPC to LC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Red Jacket Color, 30Meter - TAA 57 EA

Zero Connect TAAP42D1-1-20RD

LC UPC to LC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Red Jacket Color, 20Meter - TAA 38 EA

Zero Connect TAAP42D1-1-10RD

LC UPC to LC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Red Jacket Color, 10Meter - TAA 24 EA

Zero Connect TAAP42D1-1-07RD

LC UPC to LC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Red Jacket Color, 7Meter - TAA 30 EA

Zero Connect TAAP42D1-1-05RD

LC UPC to LC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Red Jacket Color, 5Meter - TAA 55 EA

Zero Connect TAAP42D1-1-03RD

LC UPC to LC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Red Jacket Color, 3Meter - TAA 47 EA

Zero Connect TAAP42D1-1-02RD

LC UPC to LC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Red Jacket Color, 2Meter - TAA 44 EA

Zero Connect TAAP42D1-1-01RD

LC UPC to LC UPC, Mulit Mode, OM4, OSPF Plenum, Duplex, Red Jacket Color, 1Meter - TAA 34 EA

Zero Connect TAAP12D1-1-30RD

LC UPC to LC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Red Jacket Color, 30Meter - TAA 6 EA

Zero Connect TAAP12D1-1-20RD

LC UPC to LC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Red Jacket Color, 20Meter - TAA 10 EA

Zero Connect TAAP12D1-1-10RD

LC UPC to LC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Red Jacket Color, 10Meter - TAA 16 EA

Zero Connect TAAP12D1-1-05RD

LC UPC to LC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Red Jacket Color, 5Meter - TAA 12 EA

Zero Connect TAAP12D1-1-03RD

LC UPC to LC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Red Jacket Color, 3Meter - TAA 18 EA

Zero Connect TAAP12D1-3-30RD

LC UPC to SC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Red Jacket Color, 30Meter - TAA 9 EA

Zero Connect TAAP12D1-3-20RD

LC UPC to SC UPC, Single Mode, OS2, OSPF Plenum, 20Meter - TAA 15 EA

Zero Connect TAAP12D1-3-10RD

LC UPC to SC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Red Jacket Color, 10Meter - TAA 10 EA

Zero Connect TAAP12D1-3-05RD

LC UPC to SC UPC, Single Mode, OS2, OSPF Plenum, Duplex, Red Jacket Color, 5Meter - TAA 32 EA

Zero Connect TAAP12D1-3-03RD

LC UPC to SC UPC, Single Mode, OS2, OSPF Plenum, 3Meter - TAA 32 EA

Total

REQUESTED

DELIVERY DATE:

All items to be delivered no later than 45 days ARO (Partial deliveries will be accepted)

DELIVER ITEMS

TO:

Ship to Address:

6906 Cooper Ave, Fort Meade MD, 20755-7086 Point of Contact (POC):

Matthew Fanning Office Name/Symbol:

Joint Interoperability Test Command (JITC) JT5B

EVALUATION FACTORS

Evaluation Factors and Basis for Award Determination:

Award will be made to the contractor whose quotation is determined to represent the overall best value to the Government using an LPTA evaluation process. Quotations will be evaluated with regard to technical compliance and price submissions. All aspects of Attachment 1 must be addressed for a quotation to be considered for award. The quotation should include all information the contractor wants the Government to consider and evaluate regarding its company’s ability to conform to all required terms and conditions. The below evaluation factors and subfactors will be used in the determination of technical acceptability.

a. The agency intends to award an FFP order using the LPTA methodology. After receipt of quotations, the Government will first evaluate the lowest price quotation. If the lowest price quotation is determined to be technically acceptable and otherwise properly awardable, award will be made to that contractor. The Government reserves the right to evaluate only the lowest price quotation or to conduct further evaluations of additional quotations.

b. The standards for determining technical acceptability are listed below. The Government reserves the right not to consider for award any quotation that does not adhere to the administrative requirements of this RFQ.

(1) Technical Approach Factor: The Technical Subfactors will be evaluated and rated either Acceptable or Unacceptable IAW the evaluation table below. In order for a quotation to be rated overall Technically Acceptable, the contractor must be able to provide all of the equipment set forth in the Attachment 1, unless the equipment is no longer available. If a requested hardware item is end of life and no longer available from the Original Equipment Manufacturer (OEM) the offeror/schedule contractor at the direction of the OEM can propose/quote a substitution, this substitution must be clearly identified in the quotation and documented with information from the OEM. All hardware items must be new products.

EACH OF THE FOLLOWING SUBFACTORS MUST BE RATED ACCEPTABLE:

(a) Subfactor 1: Quotations must be from authorized resellers of the OEM quoted.

For the purposes of this procurement only, an authorized reseller is defined as an entity authorized by the OEM to sell their products to the Federal Government and to provide support for the OEM items, including new releases, version upgrades, revisions, corrections of reported errors, enhancements (to include instructions for implementation and operation for all software support levels and product versions), technical support, contractor resolutions to problems or failures, and the most current commercial release or version of the software.

(b) Subfactor 2: The contractor must provide the completed Attachments as applicable in response to this RFQ.

Evaluation Table - Technical Ratings

Rating Description

Acceptable Quotation meets the minimum requirements of the solicitation.

Unacceptable Quotation does not meet the minimum requirements of the solicitation.

(2) Price Factor:

(a) Price quotations will be evaluated and the Government reserves the right, but is not obligated, to perform a price realism analysis. The total evaluated price will consist of the contractor’s quoted price for all items listed on Attachment 1.

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Each JITC Cabling and IT Supplies

FFP

JITC Cabling and IT Supply requirement for open market items. All offerors are to complete the solicitation and attached equipment supply list table. See attached evaluation factors.

Note: Delivery date is 60 days ARO. The delivery date in this CLIN is subject to change.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

PSC CD: 7F20

NET AMT

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 N/A N/A Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 30-OCT-2024 1 DISA JITC

6906 COOPER AVENUE

FORT MEADE MD 20755

MATTHEW FANNING

301-225-9232

FOB: Destination

HC1046

CLAUSES INCORPORATED BY REFERENCE

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment

NOV 2021

52.204-29 Federal Acquisition Supply Chain Security Act Orders--

Representation and Disclosures.

DEC 2023

52.209-2 Prohibition on Contracting with Inverted Domestic

Corporations--Representation

NOV 2015

52.209-10 Prohibition on Contracting With Inverted Domestic

Corporations

NOV 2015

52.212-1 Instructions to Offerors--Commercial Products and

Commercial Services

SEP 2023

52.219-33 Nonmanufacturer Rule SEP 2021

52.222-50 Combating Trafficking in Persons NOV 2021

52.229-11 Tax on Certain Foreign Procurements--Notice and

Representation

JUN 2020

52.229-12 Tax on Certain Foreign Procurements FEB 2021

52.232-33 Payment by Electronic Funds Transfer--System for Award

Management

OCT 2018

252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights DEC 2022

252.203-7005 Representation Relating to Compensation of Former DoD

Officials

SEP 2022

252.204-7003 Control Of Government Personnel Work Product APR 1992

252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

MAY 2024

252.204-7015 Notice of Authorized Disclosure of Information for Litigation

Support

JAN 2023

252.204-7017 Prohibition on the Acquisition of Covered Defense

Telecommunications Equipment or Services -- Representation

MAY 2021

252.204-7018 Prohibition on the Acquisition of Covered Defense

Telecommunications Equipment or Services

JAN 2023

252.204-7020 NIST SP 800-171 DoD Assessment Requirements NOV 2023

252.204-7022 Expediting Contract Closeout MAY 2021

252.211-7008 Use of Government-Assigned Serial Numbers SEP 2010

252.223-7008 Prohibition of Hexavalent Chromium JAN 2023

252.225-7036 Buy American--Free Trade Agreements--Balance of

Payments Program--Basic

FEB 2024

252.225-7048 Export-Controlled Items JUN 2013

252.225-7050 Disclosure of Ownership or Control by the Government of a

Country that is a State Sponsor of Terrorism

DEC 2022

252.225-7053 Representation Regarding Prohibition on Use of Certain

Energy Sourced from Inside the Russian Federation

AUG 2021

252.225-7055 Representation Regarding Business Operations with the

Maduro Regime

MAY 2022

252.225-7056 Prohibition Regarding Business Operations with the Maduro

Regime

JAN 2023

252.225-7059 Prohibition on Certain Procurements from the Xinjiang

Uyghur Autonomous Region - Representation

JUN 2023

252.225-7060 Prohibition on Certain Procurements from the Xinjiang

Uyghur Autonomous Region

JUN 2023

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006

252.239-7017 Notice of Supply Chain Risk DEC 2022

252.239-7018 Supply Chain Risk DEC 2022

252.243-7001 Pricing Of Contract Modifications DEC 1991

252.243-7002 Requests for Equitable Adjustment DEC 2022

252.244-7000 Subcontracts for Commercial Products or Commercial

Services

NOV 2023

252.246-7005 Notice of Warranty Tracking of Serialized Items MAR 2016

252.246-7006 Warranty Tracking of Serialized Items MAR 2016

252.247-7023 Transportation of Supplies by Sea JAN 2023

CLAUSES INCORPORATED BY FULL TEXT

52.201-1 ACQUISITION 360: VOLUNTARY SURVEY (SEP 2023)

(a) All actual and potential offerors are encouraged to provide feedback on the preaward and debriefing processes, as applicable. Feedback may be provided to agencies up to 45 days after award. The feedback is anonymous, unless the participant self-identifies in the survey. Actual and potential offerors can participate in the survey by selecting the following link: https://www.acquisition.gov/360.

(b) The Contracting Officer will not review the information provided until after contract award and will not consider it in the award decision. The survey is voluntary and does not convey any protections, rights, or grounds for protest.

It creates a way for actual and potential offerors to provide the Government constructive feedback about the preaward and debriefing processes, as applicable, used for a specific acquisition.

(End of provision)

52.204-7 SYSTEM FOR AWARD MANAGEMENT (OCT 2018)

(a) Definitions. As used in this provision--

Electronic Funds Transfer (EFT) indicator means a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the commercial, nonprofit, or Government entity to establish additional System for

Award Management records for identifying alternative EFT accounts (see subpart 32.11) for the same entity.

Registered in the System for Award Management (SAM) means that--

(1) The Offeror has entered all mandatory information, including the unique entity identifier and the EFT indicator, if applicable, the Commercial and Government Entity (CAGE) code, as well as data required by the Federal Funding

Accountability and Transparency Act of 2006 (see subpart 4.14) into SAM;

(2) The offeror has completed the Core, Assertions, and Representations and Certifications, and Points of Contact sections of the registration in SAM;

(3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification

Number (TIN) with the Internal Revenue Service (IRS). The offeror will be required to provide consent for TIN validation to the Government as a part of the SAM registration process; and

(4) The Government has marked the record ``Active''.

https://www.acquisition.gov/360

Unique entity identifier means a number or other identifier used to identify a specific commercial, nonprofit, or

Government entity. See www.sam.gov for the designated entity for establishing unique entity identifiers.

(b)(1) An Offeror is required to be registered in SAM when submitting an offer or quotation, and shall continue to be registered until time of award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.

(2) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation

``Unique Entity Identifier'' followed by the unique entity identifier that identifies the Offeror's name and address exactly as stated in the offer. The Offeror also shall enter its EFT indicator, if applicable. The unique entity identifier will be used by the Contracting Officer to verify that the Offeror is registered in SAM.

(c) If the Offeror does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for establishment of the unique entity identifier directly to obtain one. The Offeror should be prepared to provide the following information:

(1) Company legal business name.

(2) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(3) Company physical street address, city, state, and Zip Code.

(4) Company mailing address, city, state and Zip Code (if separate from physical).

(5) Company telephone number.

(6) Date the company was started.

(7) Number of employees at your location.

(8) Chief executive officer/key manager.

(9) Line of business (industry).

(10) Company headquarters name and address (reporting relationship within your entity).

(d) Processing time should be taken into consideration when registering. Offerors who are not registered in SAM should consider applying for registration immediately upon receipt of this solicitation. See https://www.sam.gov for information on registration.

(End of Provision)

52.204-8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAY 2024)

(a)(1) The North American Industry Classification System (NAICS) code for this acquisition is 334111.

(2) The small business size standard is 1250.

(3) The small business size standard for a concern that submits an offer, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 http://www.sam.gov/ http://www.sam.gov/ https://www.sam.gov/ employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition--

(i) Is set aside for small business and has a value above the simplified acquisition threshold;

(ii) Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or

(iii) Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(b)(1) If the provision at 52.204-7, System for Award Management, is included in this solicitation, paragraph (d) of this provision applies.

(2) If the provision at 52.204-7, System for Award Management, is not included in this solicitation, and the Offeror has an active registration in the System for Award Management (SAM), the Offeror may choose to use paragraph (d) of this provision instead of completing the corresponding individual representations and certifications in the solicitation. The Offeror shall indicate which option applies by checking one of the following boxes:

[ ] Paragraph (d) applies.

[X] Paragraph (d) does not apply and the offeror has completed the individual representations and certifications in the solicitation.

(c) (1) The following representations or certifications in SAM are applicable to this solicitation as indicated:

(i) 52.203-2, Certificate of Independent Price Determination. This provision applies to solicitations when a firm-fixed-price contract or fixed-price contract with economic price adjustment is contemplated, unless—

(A) The acquisition is to be made under the simplified acquisition procedures in Part 13;

(B) The solicitation is a request for technical proposals under two-step sealed bidding procedures; or

(C) The solicitation is for utility services for which rates are set by law or regulation.

(ii) 52.203-11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions. This provision applies to solicitations expected to exceed $150,000.

(iii) 52.203-18, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or

Statements--Representation. This provision applies to all solicitations.

(iv) 52.204-3, Taxpayer Identification. This provision applies to solicitations that do not include the provision at

52.204-7, System for Award Management.

(v) 52.204-5, Women-Owned Business (Other Than Small Business). This provision applies to solicitations that—

(A) Are not set aside for small business concerns;

(B) Exceed the simplified acquisition threshold; and

(C) Are for contracts that will be performed in the United States or its outlying areas.

(vi) 52.204-26, Covered Telecommunications Equipment or Services--Representation. This provision applies to all solicitations.

(vii) 52.209-2, Prohibition on Contracting with Inverted Domestic Corporations--Representation.

(viii) 52.209-5, Certification Regarding Responsibility Matters. This provision applies to solicitations where the contract value is expected to exceed the simplified acquisition threshold.

(ix) 52.209-11, Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law. This provision applies to all solicitations.

(x) 52.214-14, Place of Performance--Sealed Bidding. This provision applies to invitations for bids except those in which the place of performance is specified by the Government.

(xi) 52.215-6, Place of Performance. This provision applies to solicitations unless the place of performance is specified by the Government.

(xii) 52.219-1, Small Business Program Representations (Basic, Alternates I, and II). This provision applies to solicitations when the contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part 19 in accordance with 19.000(b)(1)(ii).

(A) The basic provision applies when the solicitations are issued by other than DoD, NASA, and the Coast Guard.

(B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard.

(C) The provision with its Alternate II applies to solicitations that will result in a multiple-award contract with more than one NAICS code assigned.

(xiii) 52.219-2, Equal Low Bids. This provision applies to solicitations when contracting by sealed bidding and the contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part 19 in accordance with 19.000(b)(1)(ii).

(xiv) 52.222-22, Previous Contracts and Compliance Reports. This provision applies to solicitations that include the clause at 52.222-26, Equal Opportunity.

(xv) 52.222-25, Affirmative Action Compliance. This provision applies to solicitations, other than those for construction, when the solicitation includes the clause at 52.222-26, Equal Opportunity.

(xvi) 52.222-38, Compliance with Veterans' Employment Reporting Requirements. This provision applies to solicitations when it is anticipated the contract award will exceed the simplified acquisition threshold and the contract is not for acquisition of commercial products or commercial services.

(xvii) 52.223-1, Biobased Product Certification. This provision applies to solicitations that require the delivery or specify the use of biobased products in USDA-designated product categories; or include the clause at 52.223-2, Reporting of Biobased Products Under Service and Construction Contracts.

(xviii) 52.223-4, Recovered Material Certification. This provision applies to solicitations that are for, or specify the use of, EPA- designated items.

(xix) 52.223-22, Public Disclosure of Greenhouse Gas Emissions and Reduction Goals--Representation. This provision applies to solicitations that include the clause at 52.204-7.

(xx) 52.225-2, Buy American Certificate. This provision applies to solicitations containing the clause at 52.225-1.

(xxi) 52.225-4, Buy American-Free Trade Agreements-Israeli Trade Act Certificate. (Basic, Alternates II and III.)

This provision applies to solicitations containing the clause at 52.225-3.

(A) If the acquisition value is less than $50,000, the basic provision applies.

(B) If the acquisition value is $50,000 or more but is less than $100,000, the provision with its Alternate II applies.

(C) If the acquisition value is $100,000 or more but is less than $102,280, the provision with its Alternate III applies.

(xxii) 52.225-6, Trade Agreements Certificate. This provision applies to solicitations containing the clause at

52.225-5.

(xxiii) 52.225-20, Prohibition on Conducting Restricted Business Operations in Sudan--Certification. This provision applies to all solicitations.

(xxiv) 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran—Representation and Certification. This provision applies to all solicitations.

(xxv) 52.226-2, Historically Black College or University and Minority Institution Representation. This provision applies to solicitations for research, studies, supplies, or services of the type normally acquired from higher educational institutions.

(2) The following representations or certifications are applicable as indicated by the Contracting Officer:

[Contracting Officer check as appropriate.]

(i) 52.204-17, Ownership or Control of Offeror.

(ii) 52.204-20, Predecessor of Offeror.

X (iii) 52.222-18, Certification Regarding Knowledge of Child Labor for Listed End Products.

(iv) 52.222-48, Exemption from Application of the Service Contract Labor Standards to Contracts for

Maintenance, Calibration, or Repair of Certain Equipment--Certification.

(v) 52.222-52 Exemption from Application of the Service Contract Labor Standards to Contracts for Certain

Services--Certification.

(vi) 52.227-6, Royalty Information.

(A) Basic.

(B) Alternate I.

(vii) 52.227-15, Representation of Limited Rights Data and Restricted Computer Software.

(d) The Offeror has completed the annual representations and certifications electronically in SAM accessed through https://www.sam.gov. After reviewing the SAM information, the Offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in paragraph (c) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR

4.1201); except for the changes identified below [ offeror to insert changes, identifying change by clause number, title, date]. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

FAR Clause Title Date Change

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on SAM.

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services--

Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications-

Commercial Products and Commercial Services. The Offeror shall not complete the representation in paragraph

(d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision-

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause

52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or

Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM)

(https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services."

(d) Representations. The Offeror represents that--

(1) It [ ___ ] will, [ ___ ] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The

Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that--

It [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures.

(1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as

OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered

(include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as

OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered

(include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

52.204-26 COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES--REPRESENTATION (OCT

2020)

(a) Definitions. As used in this provision, “covered telecommunications equipment or services” and "reasonable inquiry" have the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain

Telecommunications and Video Surveillance Services or Equipment.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM)

(https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services”.

(c) Representations.

(1) The Offeror represents that it [ ___ ] does, [ ___ ] does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(2) After conducting a reasonable inquiry for purposes of this representation, the offeror represents that it [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services.

52.204-27 PROHIBITION ON A BYTEDANCE COVERED APPLICATION (JUN 2023)

(a) Definitions. As used in this clause--

Covered application means the social networking service TikTok or any successor application or service developed or provided by ByteDance Limited or an entity owned by ByteDance Limited.

Information technology, as defined in 40 U.S.C. 11101(6)--

(1) Means any equipment or interconnected system or subsystem of equipment, used in the automatic acquisition, storage, analysis, evaluation, manipulation, management, movement, control, display, switching, interchange, transmission, or reception of data or information by the executive agency, if the equipment is used by the executive agency directly or is used by a contractor under a contract with the executive agency that requires the use-

(i) Of that equipment; or

(ii) Of that equipment to a significant extent in the performance of a service or the furnishing of a product;

(2) Includes computers, ancillary equipment (including imaging peripherals, input, output, and storage devices necessary for security and surveillance), peripheral equipment designed to be controlled by the central processing unit of a computer, software, firmware and similar procedures, services (including support services), and related resources; but

(3) Does not include any equipment acquired by a Federal contractor incidental to a Federal contract.

(b) Prohibition. Section 102 of Division R of the Consolidated Appropriations Act, 2023 (Pub. L. 117-328), the No

TikTok on Government Devices Act, and its implementing guidance under Office of Management and Budget

(OMB) Memorandum M-23-13, dated February 27, 2023, "No TikTok on Government Devices" Implementation

Guidance, collectively prohibit the presence or use of a covered application on executive agency information technology, including certain equipment used by Federal contractors. The Contractor is prohibited from having or using a covered application on any information technology owned or managed by the Government, or on any information technology used or provided by the Contractor under this contract, including equipment provided by the

Contractor's employees; however, this prohibition does not apply if the Contracting Officer provides written notification to the Contractor that an exception has been granted in accordance with OMB Memorandum M-23-13.

(c) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (c), in all subcontracts, including subcontracts for the acquisition of commercial products or commercial services.

(End of clause)

52.204-28 FEDERAL ACQUISITION SUPPLY CHAIN SECURITY ACT ORDERS--FEDERAL SUPPLY

SCHEDULES, GOVERNMENTWIDE ACQUISITION CONTRACTS, AND MULTI-AGENCY

CONTRACTS (DEC 2023)

Covered article, as defined in 41 U.S.C. 4713(k), means--

(1) Information technology, as defined in 40 U.S.C. 11101, including cloud computing services of all types;

(2) Telecommunications equipment or telecommunications service, as those terms are defined in section 3 of the

Communications Act of 1934 (47 U.S.C. 153);

(3) The processing of information on a Federal or non-Federal information system, subject to the requirements of the

Controlled Unclassified Information program (see 32 CFR part 2002); or

(4) Hardware, systems, devices, software, or services that include embedded or incidental information technology.

FASCSA order means any of the following orders issued under the Federal Acquisition Supply Chain Security Act

(FASCSA) requiring the removal of covered articles from executive agency information systems or the exclusion of one or more named sources or named covered articles from executive agency procurement actions, as described in

41 CFR 201-1.303(d) and (e):

(1) The Secretary of Homeland Security may issue FASCSA orders applicable to civilian agencies, to the extent not covered by paragraph (2) or (3) of this definition. This type of FASCSA order may be referred to as a Department of

Homeland Security (DHS) FASCSA order.

(2) The Secretary of Defense may issue FASCSA orders applicable to the Department of Defense (DoD) and national security systems other than sensitive compartmented information systems. This type of FASCSA order may be referred to as a DoD FASCSA order.

(3) The Director of National Intelligence (DNI) may issue FASCSA orders applicable to the intelligence community and sensitive compartmented information systems, to the extent not covered by paragraph (2) of this definition. This type of FASCSA order may be referred to as a DNI FASCSA order.

Intelligence community, as defined by 50 U.S.C. 3003(4), means the following--

(1) The Office of the Director of National Intelligence;

(2) The Central Intelligence Agency;

(3) The National Security Agency;

(4) The Defense Intelligence Agency;

(5) The National Geospatial-Intelligence Agency;

(6) The National Reconnaissance Office;

(7) Other offices within the Department of Defense for the collection of specialized national intelligence through reconnaissance programs;

(8) The intelligence elements of the Army, the Navy, the Air Force, the Marine Corps, the Coast Guard, the Federal

Bureau of Investigation, the Drug Enforcement Administration, and the Department of Energy;

(9) The Bureau of Intelligence and Research of the Department of State;

(10) The Office of…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .