- SG22FEB216734- Testing Requirements.pdf

ADDITIONAL INFORMATION PERTINENT TO REQUIREMENT

***ATTENTION FORT CAMPBELL LOCATION***

THIS REQUIREMENT MUST BE ENGINEERED AND PROVISIONED TOTALLY DIVERSE END TO END

TO THE GOVERNMENT'S SERVICE DELIVERY POINTS (SDP'S) FROM TSR SG10MAR175277;

MEANING THAT THE PHYSICAL PATHS ARE TOTALLY SEPARATE INCLUDING MAN HOLES,

CONDUIT, (CENTRAL OFFICE LOCATIONS), AND FIBER BUILDS. ADDITIONALLY AS A MINIMUM

MUST HAVE 50 METERS PHYSICAL SEPARATION FROM TSR SG16MAR216754.

TELECOMM PROVIDER MUST PROVIDE DISA COLOR POWERPOINT DRAWINGS FOR TECHNICAL

REVIEW SHOWING THE ROUTES FROM THE COMMERCIAL DEMARCS TO THE SUPPORING

CENTRAL OFFICES AND OR WIRING CENTERS ENSURING THE PHYSICAL.

MINIMUM TECHNICAL SPECIFICATIONS:

SPECIFIC FORMAT TO BE USED IS:

LINE RATE: 10GB. LINE CODE: NRZ FRAME FORMAT: SCRAMBLED IAW ANSI T1.104-1991 (R2003)

1. TEST AND ACCEPTANCE: FIBER OPTIC 10GB WAVE CIRCUITS SHALL PASS A FULLY

DOCUMENTED SATISFACTORY SOAK TEST BY THE CONUS GNOSC AT SCOTT AFB, IL.

PRIMARY: (C) 618-220-8691 (D) 770-8691.

2. THE WAVELENGTH TRANSMISSION SERVICE PROVIDED SHALL MEET THE FOLLOWING

PERFORMANCE REQUIREMENTS ON A MONTHLY BASIS. PERFORMANCE

REQUIREMENT/PERFORMANCE SPECIFICATION: NON-DIVERSE/NON-PROTECTED

AVAILABILITY: GREATER THAN OR EQUAL TO 99.5% OR BETTER. MONTHLY SHORT

INTERRUPTION EVENT COUNT (SEIC): LESS THAN OR EQUAL TO 9% ERRORED SECONDS

(ES): LESS THAN OR EQUAL TO 0.005 % SEVERELY ERRORED SECONDS (SES): LESS THAN

OR EQUAL TO 0.00035 BACKGROUND BLOCK ERROR RATIO (BBER): LESS THAN OR EQUAL

TO 5 X 10-6 BIT COUNT INTEGRITY (BCI)/PATTERN SLIP (PAT SLIP): LESS THAN OR EQUAL

TO 1 PER 72 HOURS JITTER SEE NOTE 1 (JITTER) BER: LESS THAN OR EQUAL TO 1X10-12

DELAY (ONE WAY): * LESSER OF 10 MSEC OR (0.01 X D MSEC) * WHERE "D" IS THE SDP TO

SDP TRANSMISSION DISTANCE, MEASURED SHORTEST GREAT CIRCLE, IN KILOMETERS.

3. ROUND TRIP DELAY (RTD) SHALL BE LESS THAN OR EQUALTO 10 MILLISECONDS TO

EFFECTIVELY SUPPORT THE GOVERNMENT'S MISSION. THE GOVERNMENT ACCEPTING

AUTHORITY WILL CONFIRM THE RTD DURING THE TURN-UP AND TEST PHASE AND IF IT

DOES NOT ALIGN WITH THE CONTRACTORS PROPOSAL, DISA IE161 WILL NOTIFY DITCO

IMMEDIATELY IN WRITING. (**UNIQ INSTALL FACTORS**) (SP A) EDULE/COORDINATE

WITH THE POCS LISTED ON THIS ORDER 72 HOURS IN ADVANCE PRIOR TO SITE SURVEYS

OR INSTALLATIONS. (** DIVERSITY INFO **) SERVICE DIVERSITY REQUESTED; DUAL

HOMING CCSD: 6MD4; (** ADDITIONAL PROVISIONING INFORMATION **) (ORG ACCT)

DISN FIBER OPTIC BACKBONE & O/W CONTROL.

CIRCUIT SPECIFICATIONS:

10GB WAVE SERVICE MUST BE TERMINATED TO THE LINE SIDE OF THE FIBER

TERMINATING PATCH PANEL INSTALLED IN THE DISA IE1 PROVIDED MSPP SUITE AT FORT

CAMPBELL AND THE FIBER TERMINATING PATCH PANEL INSTALLED IN THE DISA IE1

PROVIDED ODXC SUITE INSTALLED AT SCOTT AFB.

TELECOMM PROVIDER MUST CONTACT DISA CONUS TIER-II MSPP ENGINEERING UPON

RECEIPT OF A VALID (TSO) TO ESTABLISH THE COORDINATION AND ACTIVATION

PROCESS. PRI POC: CONTACT: MIKE REEVES (C) 618-220-8973 (D) 770-8973 ALT POC:

CONTACT: DAMION SCANDRICK (C) 618-220-9634 (D) 770-9634. ALT POC: CONTACT: AARON

SMITH (C) 618-220-9820 (D) 770-9820, ALT POC: CONTACT: BOB RISKY (C) 618-220-8632 (D)

770-8632 ALT POC: ORGANIZATIONAL NUMBER (C) 618-220-8691 (D) 770-8691.

ONCE TELECOMM PROVIDER HAS COMPLETED INSIDE WIRING FROM THE DWDM

EQUIPMENT SUITE TO THE GOVERNMENT SERVICE DELIVERY POINT (SDP) AT EACH

LOCATION, THEY MUST ENSURE THE LIGHT LEVEL READINGS (DB LOSS) ARE ADJUSTED

TO READ -3 TO -9 LOSS. ADDITIONALLY, THESE LEVELS MUST BE DOCUMENTED ON THE

NOTICE OF COMPLETION (NOC) SENT TO DITCO. ***THE VENDOR MUST TERMINATE 10GB

WAVE SERVICE AT BOTH LOCATIONS IAW UNIQUE INSTALLATION FACTORS.***

THE 10GB WAVE SERVICE MUST PASS A DOCUMENTED SATISFACTORY 72 HOUR END TO

END TEST IAW ITU STANDARD M.2101 PRIOR TO TURN UP TO THE GOVERNMENT.

CROSS REFERENCE CCSD IS "DIYU6LD4".

1. VENDOR MUST MEET SVC DATE.

2. CIRCUIT REQUIRES THE FOLLOWING PARAMETERS:

(A) FIBER TERMINATION: SINGLE-MODE INTERFACE REQUIREMENT/INTERFACE DATA

RATE: LINE CODING, FRAME FORMAT, PHYSICAL CONNECTOR, 10 GBPS, NRZ,

SCRAMBLED PER ANSI T1.104-1991(R2003). ALL OPTIONS DEFINED SC CONNECTOR,

SINGLE-MODE FIBER PER ANSI T1.105.06-2002 (SR-0, SR-1, IR-1, IR-2, LR-1, LR-2, LR-3)

(B) LINE MUST REMAIN FULLY OPERATIONAL AND AVAILABLE TO USERS 24 HOURS A

DAY, SEVEN DAYS PER WEEK, AT LEAST 99.5% OR BETTER

(C) ONE-HOUR RESPONSE TIME TURN-AROUND MUST OCCUR TO REPAIR ONCE

TROUBLE-CALL HAS BEEN REPORTED

(D) GFE CLOCKING: VENDOR ESFU (OR EQUIVALENT) NOT TO BE ENGINEERED INTO

CIRCUIT.

(E) SINGLE MODE FIBER TERMINATIONS "SC" CONNECTORS

(F) NO NETWORK INTERFACE UNIT

(G) DEDICATED PATH

(H) CARRIER REQUIRED TO HAVE CIRCUIT VISIBILITY TO ASSIST IN ANY CIRCUIT

OUTAGES.

(I) THE VENDOR MUST CONDUCT A 72 HOUR SATISFACTORY END TO END TEST ON

THE 10 WAVE SERVICE IAW ITU STANDARD M.2101. ADDITIONALLY, THE VENDOR

TEST SET/SETS MUST HAVE THE ABILITY TO PRINT THE TEST RESULTS AND THOSE

RESULTS MUST BE EMAILED TO THE ACCEPTING AUTHORITY FOR REVIEW

(J) VENDOR MUST HAVE A 24X7 NETWORK OPERATIONAL CENTER OF THIS 10GB

WAVE SERVICE