Havre_2023_O2834-Specicfications.pdf
PDF 87 KB Posted
- Attached to
- HAVRE, MT STEEL FENCE MATERIAL
- Solicitation number
- 140L3623Q0040
About this file
This document outlines specifications for wire and steel T-post fencing materials for a Bureau of Land Management project in Havre, Montana. The specifications call for galvanized barbed or barbless wire that meets ASTM standards for zinc coating and breaking strength. Steel fence posts must be painted solid green and meet requirements for material, weight, and anchor plates pursuant to ASTM A702. Clips must be 11-gauge galvanized wire. Delivery of materials will be to the Havre BLM office. The related federal contract opportunity is a solicitation from the Department of the Interior Bureau of Land Management seeking steel fence materials for Havre, Montana.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Havre_2023_Item_Schedule_Steel_Fence_Material.pdf | ||
| Sol_140L3623Q0040.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Section 02834 - 1 of 2
DIVISION 2 SECTION MT02834
WIRE AND STEEL T POSTS
Rev. 03-90
PART 1: GENERAL
1.02 REFERENCES:
A. American Society for Testing and Materials:
ASTM A 121-Rev-A-92 Zinc-Coated (Galvanized) Steel Barbed Wire ASTM A 702-89 Steel Fence Posts and Assemblies, Hot-Wrought
PART 2: PRODUCTS
2.01 FURNISHED MATERIALS:
A. Wire:
1. Barbed Wire: A strand of two plies of 12-1/2-ga galvanized wires twisted together with 2-point barbs of 14-ga wire spaced 4 inches apart.
Wire and barbs shall be zinc-coated steel, with a zinc coating of at least
0.3 oz/ft2 of coated surface area. The minimum breaking strength of each wire shall be 950 lb-force. Wire shall conform to ASTM A 121.
2. Barbless Wires: A strand of two 12-1/2-ga galvanized wires twisted together. Wire and barbs shall be zinc-coated steel, with a zinc coating of at least 0.3 oz/ft2 of coated surface area. The minimum breaking strength of each wire shall be 950 lb-force. Wire shall conform to ASTM A 121.
B. Posts:
1. Steel Fence Posts: Shall be painted solid green, no white, silver or lime green tops, "T" or "U" (channel) bar type, with a welded or riveted anchor plate, and shall be furnished with clip-type wire fasteners (punched tabs for fastening wires are not acceptable). Steel posts shall be manufactured from wrought, rail, or new billet steel, and shall have a minimum weight of 1.33 lb/lin ft exclusive of the anchor plate, which shall weigh a minimum of 0.67 lb +5%, and shall be a minimum of 18 square inches in area. Steel fence posts and fasteners shall be in accordance with ASTM A 702.
C. Fasteners:
1. Clips: Shall be 11-gauge galvanized wire.
DIVISION 2 SECTION
MT02834
WIRE AND STEEL T POSTS
Rev. 03-90
Section 02834 - 2 of 2
PART 4: MEASUREMENT AND PAYMENT
4.02 BASIS OF PAYMENT:
A. Payment: Prices and payment will be full compensation for the work described in the Value Schedule. Delivery of materials will be to the Havre Bureau Of Land Management, 3990 Highway 2 West, Havre Montana.
END OF SECTION
File details come from the government source that posted it. Updated .