HAFB OM_RFI01 Opacity Meter Quarterly Inspections.pdf

PDF 164 KB Posted

Attached to
Opacity Meter Quarterly Inspections
Solicitation number
HAFBOM_RFI01
Issued by

About this file

This is a Request for Information (RFI) for quarterly inspection and maintenance services for opacity meters at Hanscom Air Force Base in Massachusetts. The procurement is a 100% Small Business Set Aside, classified under Product Service Code Z1NB (Maintenance of Heating and Cooling Plants) and NAICS Code 238990 (All Other Specialty Trade Contractors). The RFI is for market research purposes only and does not constitute a binding procurement or obligation to award a contract.

The scope of work requires the contractor to perform quarterly inspections and maintenance on two Land Model 4500 MKIII opacity meters and a Data Acquisition Handling System (DAHS) computer component located at Hanscom AFB, Building locations specified in redacted sections. Services must include optical alignment checks, 40 CFR Part 60 Appendix-B performance specification testing, 40 CFR Part 60 Appendix-F Procedure 3 diagnostic testing, 3-point calibration error testing, zero compensation checks, and on/off stack testing. The contractor must ensure compliance with federal regulations (40 CFR Part 60), Massachusetts Department of Environmental Protection Title-V requirements, and EPA Clean Air Act standards. Additional requirements include providing opacity filters with documented certifications, all necessary safety equipment including fall protection, submission of a Quality Assurance/Quality Control plan within 15 working days of award, and quarterly inspection reports submitted within 10 calendar days of completion. The contractor must coordinate DAHS inspections with the Hanscom AFB team, scheduling visits at least 2 weeks in advance. Performance is assessed at 100% compliance through visual inspection. The RFI requests capability statements and brochures from qualified vendors but does not obligate the government to any acquisition action.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Request for Information (RFI) for

Opacity Meter Quarterly Inspections

Original Set Aside: 100% Small Business Set Aside

Product Service Code: Z1NB - Maintenance of Heating and Cooling Plants

NAICS Code: 238990 - All Other Specialty Trade Contractors

Place of Performance: Hanscom AFB, MA 01731

HAFBOM_RFI01 – Opacity Meter Quarterly Inspections

For RFI use: This is not a Request for Proposal (RFP), applications, proposal abstracts, or quotations, nor does its issuance obligate or restrict the Government to an acquisition approach.

The Government does not intend to award a contract based on any responses or pay for the preparation or use of any information submitted. All information received will be used for planning and market research purposes only. Any proprietary information submitted should be marked accordingly. The Government will not be liable for or suffer any consequential damages, for any proprietary information not properly identified. Proprietary information will be safeguarded in accordance with the applicable Government regulations.

Purpose: The Government is seeking information from qualified vendors capable of providing Opacity Meter Inspections and Servicing at Hanscom Air Force Base (AFB). Respondents may include capability statements or brochures detailing their ability to meet this requirement.

An excerpt of the Performance Work Statement (PWS) detailing the description of services is included within this attachment. This PWS is for RFI purposes and is subject to change.

1. DESCRIPTION OF SERVICES:

1.1. Scope: The Contractor shall perform quarterly inspections/service for two (2) Opacity Meters (ref. Appendix A, Table-1) as well as the Data Acquisition Handling System (DAHS) COMS (ref. Appendix A, Table-1). The Contractor shall submit, by email, a Quarterly Inspection/Service Report to . In accordance with Federal Acquisition Regulation (FAR) 37.101 this requirement is for a “non-personal service” which means an agreement under which the personnel rendering the services are not subject, either by the contract’s terms or by the manner of its administration, to the supervision and control usually prevailing in relationships between the Government and its employees. The Contractor shall provide all personnel, equipment, tools, material, vehicles, supervision, transportation, and any other items necessary to perform maintenance on the Opacity Meters and Data Acquisition Handling System (DAHS) COMS. The Contractor shall be responsible for ensuring all services provided under this agreement are in accordance with the terms and conditions set forth herein and conform to the manufacturers’ equipment specifications.

1.2. Requested Service: Quarterly Opacity Meter Inspections

o The Contractor shall perform quarterly inspection/service for two (2) Opacity Meters as well as the DAHS COMS located at the . The quarterly inspection/service requirements for the two (2) Opacity Meters at the Hanscom AFB in building are as follows:

o Inspection and service performed by contractor personnel shall comply with all applicable local, state, and federal codes, standards, and manufacturers’ instructions o Optical alignment checks/audits o Perform 40 Code of Federal Regulations (CFR) Part 60, Appendix-B, Performance Specification-1: “Specifications and Test Procedures for Opacity Continuous Emission Monitoring Systems in Stationary Sources” o Perform 40 CFR Part 60 Appendix-F Procedure 3 diagnostic testing (on/off stack as required) o 3-point calibration error testing o Zero Compensation Check (the external zero tool, which is a device for simulating or checking the cross-stack alignment of the COMS, is at the for contractor use) o Perform Procedure-3 testing including on/off stack testing o Ensure that the two Opacity Meters located at building remain in compliance with 40 Code of Federal Regulations Part-60: Protection of Environment – Standards of Performance for New Stationary Sources, Massachusetts Department of Environmental Protection (MassDEP) Title-V:

Continuous Emissions Compliance, and Title V: U.S. EPA Clean Air Act o Ensure that two (2) Opacity Meters at the Hanscom AFB , and

DAHS listed in Appendix A are functioning properly, and reporting accurately o Opacity meter maintenance shall include all recurring maintenance items recommended by the manufacturer including scheduled inspections, filter replacement, cleaning, adjustment, calibration, and hoses and gaskets o The Contractor shall provide opacity filters and maintain the certification of these filters and provide documented certifications with each report o The Contractor shall provide all necessary safety equipment including but not limited to fall protection including harness and ladder climber for third rail o Within 15 working days after award the Contractor shall provide a written

Quality Assurance/Quality Control (QA/QC) Plan for the continuous opacity monitoring systems (COMS) and all performing outlined work for the two (2) Opacity Meters and DAHS components listed in Appendix A, to the for review and approval o The Contractor shall submit, by email, an Opacity Meter Quarterly Inspection/Service Report to within 10-calendar days following their completion of their initial inspection, as well as after each subsequent Quarterly Inspection

• The Quarterly Inspection/Service Report shall contain, at minimum, the following information

• An outline of the current Quarterly Inspection/Service Findings

• Recommended actions to be taken

• Recommended actions taken o Specify/define deficiencies that could cause a MassDEP Title-V Final Air Quality Operating Permit violation in the Opacity Meter program: U.S. EPA Clean Air Act Permit violation o With regard to the DAHS COMS components, the U.S. Air Force requires that the

Hanscom AFB must be present for the entire time the Contractor works inspects/maintenances the DAHS COMS with respect to its electronic data interface with the two (2) Opacity Meters located at building . This process shall proceed as follows:

o The Contractor shall contact the COR to schedule support 2 weeks in advance of visit o The shall contact the appropriate members of the Hanscom AFB team, and schedule a time when both the Contractor and can meet to inspect the DAHS COMS components and electronic interface with the two Opacity Meters located in building

SECTION 2

Performance Assessment

The Contractor shall be aware that the absence of any contract requirement from the Service Summary does not detract from its enforceability nor limit the rights or remedies of the Government under any other provision of the contract. The Contractor shall ensure the following service summary requirements are accomplished.

2.1.

Performance

Objective

PWS

Para.

Performance Threshold

Method of Assessment

SS 1: Perform Quarterly Opacity Inspections

1.2 100% Compliance Visual inspection

Appendix-A

Table-1: Opacity Meter/COMS DAHS Listing

Item# Requirement

ESTIMATED

Quantity

ESTIMATED

Frequency

1 Bldg. – #1 Land Model 4500 MKIII * 1 Qtrly

2 Bldg. – #2 Land Model 4500 MKIII * 1 Qtrly

3 Computer: TBD 1 Qtrly

File details come from the government source that posted it. Updated .