MAS - Consolidated Networks Corporation - GS35F0114N

AUTHORIZED FEDERAL SUPPLY SCHEDULE INFORMATION TECHNOLOGY SCHEDULE PRICELIST

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY EQUIPMENT, SOFTWARE &

SERVICES

SPECIAL ITEM NUMBERS 54151S, INFORMATION TECHNOLOGY (IT) PROFESSIONAL SERVICES

Consolidated Networks Corporation

722 N. Broadway Ave., Suite 203 Oklahoma City, OK 73102 Phone: (405) 879‐2322 Fax: (405) 840‐2605 www.cnc‐usa.com

Contract Number: GS‐35F‐0114N

Period Covered by Contract: November 15, 2017 through November 14, 2022

General Services Administration Federal Acquisition Service

Pricelist current through Modification #__A826____, dated ____11/19/2020____.

All IT Professional Services and ordering information in this Authorized FSS Information Technology Schedule Pricelist are also available on the GSA Advantage! System (http://www.gsaadvantage.gov).

CUSTOMER INFORMATION:

1a. Awarded Special Item Number(s):

SIN Description

54151S Information Technology Services

1b. Identification of the lowest priced labor category description, job title # and hourly rate awarded under the contract is:

Job Title # Labor Category Description GSA Hourly Rate

IT Support Specialist 1

Performs variety of professional support functions using organization’s office automation systems.

Able to advise other staff in the use of IT systems and their function relevant to the project mission.

$49.77

1c. Labor Category Descriptions of all corresponding commercial job titles, experience, functional responsibility and education are outlined on Pages 14‐20 within this pricelist.

2. Maximum Order: $500,000 per SIN – For SINs 54151S

3. Minimum Order: $100

4. Geographic Scope of Coverage: The Geographic Scope of Coverage is Domestic Delivery. This is delivery within the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and U.S.

Territories. Domestic delivery also includes a port or consolidation point, within the aforementioned areas, for orders received from overseas activities.

5. Point(s) of production (city, county, and State or foreign country): 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and U.S. Territories.

6. Discount from list prices or statement of net price: Prices shown are NET Prices, Basic Discounts have been deducted

7. Quantity Discount: None

8. Prompt Payment Terms: None

9a. Notification that Government purchase cards are accepted at or below the micro‐purchase threshold. Yes 9b. Notification whether Government purchase cards are accepted or not accepted above the micro‐ purchase threshold. Yes

10. Foreign Items: No foreign items are awarded under this contract.

11a. Time of Delivery – 30 Days

11b. Expedited Delivery Terms: As Negotiated between Consolidated Networks Corporation and the

Ordering Activity

11c. Overnight/2‐Day Delivery Terms: As negotiated between Consolidated Networks Corporation and the Ordering Activity

11d. Urgent Requirements: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, ordering activities are encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery.

The Contractor shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

12. FOB Point: Destination

13a. Ordering Address: Consolidated Networks Corporation 722 N. Broadway Ave., Suite 203 Oklahoma City, OK 73102 405‐879‐2322 main 405‐840‐2605 fax gsa‐pm@cnc‐usa.com

13b. Ordering procedures: For supplies and services, the ordering procedures, information on Blanket Purchase Agreements (BPA’s) are found in Federal Acquisition Regulation (FAR) 8.405‐3.

14. Payment Address: Consolidated Networks Corporation 722 N. Broadway Ave., Suite 203 Oklahoma City, OK 73102 405‐879‐2322 main

15. Warranty/Guarantee Provisions: All services performed under this contract will be guaranteed to completed in a satisfactory workmanlike manner as delineated with this Authorized FSS IT Schedule Pricelist.

16. Export Packing Charges: Export Packing is not offered under this contract.

17. Terms and conditions of Government purchase card acceptance (any thresholds above the micro‐ purchase level).

18. Terms and conditions of rental, maintenance, and repair– Not Applicable

19. Terms and conditions of installation – Not Applicable

20. Terms and conditions of repair parts indicating date of parts price lists and any discounts from list prices – Not Applicable 20a. Terms and conditions for any other services – Not Applicable

21. List of service and distribution points : As Negotiated between Consolidated Networks Corporation and the Ordering Activity

22. List of Participating Dealers: Consolidated Networks Corporation does not authorize any participating dealers under this contract.

23. Preventive maintenance – Not Applicable

24a. Environmental Attributes (e.g., recycled content, energy efficiency, and/or reduced pollutants):

Not Applicable

24b. Section 508 Compliance: Contact Consolidated Networks Corporation for Section 508 compliance information. The EIT standards can be found at: http://www.section508.gov

25. Data Universal Numbering System (DUNS) Number: 008051919

Taxpayer Idenfication Number (TIN): 73‐1547102

Business Size: Small Business Concern

CAGE Code: 1SSY0

26. Notification regarding registration in Central Contractor Registration (CCR) database:

Consolidated Networks Corporation is currently registered within the System for Award Management (SAM) database.

27. Trade Agreements Act of 1979, as Amended: All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

28. Ordering Procedures for Federal Supply Schedule Contracts: Ordering activities shall use the ordering procedures of Federal Acquisition Regulation (FAR) 8.405 when placing an order or establishing a BPA for supplies or serJvices. These procedures apply to all schedules.

a. FAR 8.405‐1 Ordering procedures for supplies, and services not requiring a statement of work.

b. FAR 8.405‐2 Ordering procedures for services requiring a statement of work.

29. Federal Information Technology Telecommunications Standards Requirements: Ordering activities acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index). Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED‐STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor.

30. Federal Information Processing Standards Publications (FIPS PUBS): Information Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication." Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S.

Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use. Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487‐4650.

31. Federal Telecomunication Standards (FED‐STDS): Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED‐STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED‐STD." Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED‐STDS should be obtained from the GSA, Federal Acquisition Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619‐8925. Please include a self‐addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975‐2833.

32. Contractor Tasks/Special Requirements (C‐FSS‐370) (NOV 2003):

(a) Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the Multiple Award Schedule.

(b) Travel: The Contractor may be required to travel in performance of orders issued under this contract. Allowable travel and per diem charges are governed by Pub .L. 99‐234 and FAR Part 31, and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the Multiple Award Schedule. Travel in performance of a task order will only be reimbursable to the extent authorized by the ordering agency. The Industrial Funding Fee does NOT apply to travel and per diem charges.

(c) Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific FSC/service code classifications offered. All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the Multiple Award Schedule program.

(d) Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific FSC/service code classifications offered. All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple Award Schedule program.

(e) Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract. Ordering activities may require agency approval of additions or replacements to key personnel.

(f) Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor’s participation in such order may be restricted in accordance with FAR Part 9.5.

(g) Documentation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency’s order.

(h) Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or negotiated in the agency’s order.

(i) Government‐Furnished Property: As specified by the agency’s order, the Government may provide property, equipment, materials or resources as necessary.

(j) Availability of Funds: Many Government agencies’ operating funds are appropriated for a specific fiscal year. Funds may not be presently available for any orders placed under the contract or any option year. The Government’s obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering Contracting Officer.

(k) Overtime: For professional services, the labor rates in the Schedule should not vary by virtue of the Contractor having worked overtime. For services applicable to the Service Contract Act (as identified in the Schedule), the labor rates in the Schedule will vary as governed by labor laws (usually assessed a time and a half of the labor rate).

33. Contract Administration for Ordering Activities: Any ordering activity, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212‐4, paragraphs (l) Termination for the ordering activity’s convenience, and (m) Termination for Cause (See 52.212‐4)

34. GSA Advantage!: GSA Advantage! is an on‐line, interactive electronic information and ordering system that provides on‐line access to vendors' schedule prices with ordering information. GSA

Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer;

(2) Manufacturer's Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.: NetScape). The Internet address is http://www.gsaadvantage.gov

35. Purchase of Open Market Items: Note: Open Market Items are also known as incidental items, noncontract items, non‐Schedule items, and items not on a Federal Supply Schedule contract. ODCs (Other Direct Costs) are not part of this contract and should be treated as open market purchases.

Ordering Activities procuring open market items must follow FAR 8.402(f).

For administrative convenience, an ordering activity contracting officer may add items not on the Federal Supply Multiple Award Schedule (MAS) ‐‐ referred to as open market items ‐‐ to a Federal Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if‐

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the Federal Supply Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs (Part 19));

(2) The ordering activity contracting officer has determined the price for the items not on the Federal Supply Schedule is fair and reasonable;

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule;

and

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

36. Contractor Commitments, Warranties and Representations:

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

37. Overseas Activities: The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:

None Upon request of the Contractor, the ordering activity may provide the Contractor with logistics support, as available, in accordance with all applicable ordering activity regulations. Such ordering activity support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

38. Blanket Purchase Agreements (BPAs): The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable. BPAs may be established with one or more schedule contractors. The number of BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the BPA(s). Ordering activities shall follow FAR 8.405‐3 when creating and implementing BPA(s).

39. Contractor Team Arrangements: Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238‐74, Industrial Funding Fee and Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

40. Installation, Deinstallation, Reinstallation: The Davis‐Bacon Act (40 U.S.C. 276a‐276a‐7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis‐Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis‐Bacon Act applies.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis‐Bacon Act. The proper Davis‐Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 33411.

41. Prime Contractor Ordering from Federal Supply Schedules: Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order

(a) A copy of the authorization from the ordering activity with whom the contractor has the prime contract (unless a copy was previously furnished to the Federal Supply Schedule contractor); and

(b) The following statement:

This order is placed under written authorization from _______ dated _______. In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.

42. Insurance‐ Work On A Government Installation (JAN 1997)(FAR 52.228‐5):

(a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—

(1) For such period as the laws of the State in which this contract is to be performed prescribe; or

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance, and shall make copies available to the Contracting Officer upon request.

43. Software Interoperability: Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interface may be identified as interoperable on the basis of participation in a Government agency‐sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

44. Advance Payments: A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already delivered. Advance or pre‐payment is not authorized or allowed under this contract. (31 U.S.C. 3324)

TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT)

PROFESSIONAL SERVICES (SPECIAL ITEM NUMBERS 54151S)

*NOTE: All non‐professional labor categories must be incidental to, and used solely to support professional services, and cannot be purchased separately.

1. SCOPE

a. The prices, terms and conditions stated under Special Item Numbers 54151S Information Technology Professional Services apply exclusively to IT Professional Services within the scope of this Information Technology Schedule.

b. The Contractor shall provide services at the Contractor’s facility and/or at the ordering activity location, as agreed to by the Contractor and the ordering activity.

2. PERFORMANCE INCENTIVES I‐FSS‐60 Performance Incentives (April 2000)

a. Performance incentives may be agreed upon between the Contractor and the ordering activity on individual fixed price orders or Blanket Purchase Agreements under this contract.

b. The ordering activity must establish a maximum performance incentive price for these services and/or total solutions on individual orders or Blanket Purchase Agreements.

c. Incentives should be designed to relate results achieved by the contractor to specified targets. To the maximum extent practicable, ordering activities shall consider establishing incentives where performance is critical to the ordering activity’s mission and incentives are likely to motivate the contractor. Incentives shall be based on objectively measurable tasks.

3. ORDER

a. Agencies may use written orders, EDI orders, blanket purchase agreements, individual purchase orders, or task orders for ordering services under this contract. Blanket Purchase Agreements shall not extend beyond the end of the contract period; all services and delivery shall be made and the contract terms and conditions shall continue in effect until the completion of the order. Orders for tasks which extend beyond the fiscal year for which funds are available shall include FAR 52.232‐19 (Deviation – May 2003) Availability of Funds for the Next Fiscal Year. The purchase order shall specify the availability of funds and the period for which funds are available.

b. All task orders are subject to the terms and conditions of the contract. In the event of conflict between a task order and the contract, the contract will take precedence.

4. PERFORMANCE OF SERVICES

a. The Contractor shall commence performance of services on the date agreed to by the Contractor and the ordering activity.

b. The Contractor agrees to render services only during normal working hours, unless otherwise agreed to by the Contractor and the ordering activity.

c. The ordering activity should include the criteria for satisfactory completion for each task in the Statement of Work or Delivery Order. Services shall be completed in a good and workmanlike manner.

d. Any Contractor travel required in the performance of IT Services must comply with the Federal Travel Regulation or Joint Travel Regulations, as applicable, in effect on the date(s) the travel is performed. Established Federal Government per diem rates will apply to all Contractor travel. Contractors cannot use GSA city pair contracts.

5. STOP‐WORK ORDER (FAR 52.242‐15) (AUG 1989)

(a) The Contracting Officer may, at any time, by written order to the Contractor, require the Contractor to stop all, or any part, of the work called for by this contract for a period of 90 days after the order is delivered to the Contractor, and for any further period to which the parties may agree. The order shall be specifically identified as a stop‐work order issued under this clause. Upon receipt of the order, the Contractor shall immediately comply with its terms and take all reasonable steps to minimize the incurrence of costs allocable to the work covered by the order during the period of work stoppage. Within a period of 90 days after a stop‐work is delivered to the Contractor, or within any extension of that period to which the parties shall have agreed, the Contracting Officer shall either‐

(1) Cancel the stop‐work order; or

(2) Terminate the work covered by the order as provided in the Default, or the Termination for Convenience of the Government, clause of this contract.

(b) If a stop‐work order issued under this clause is canceled or the period of the order or any extension thereof expires, the Contractor shall resume work. The Contracting Officer shall make an equitable adjustment in the delivery schedule or contract price, or both, and the contract shall be modified, in writing, accordingly, if‐

(1) The stop‐work order results in an increase in the time required for, or in the Contractor's cost properly allocable to, the performance of any part of this contract; and

(2) The Contractor asserts its right to the adjustment within 30 days after the end of the period of work stoppage; provided, that, if the Contracting Officer decides the facts justify the action, the Contracting Officer may receive and act upon the claim submitted at any time before final payment under this contract.

(c) If a stop‐work order is not canceled and the work covered by the order is terminated for the convenience of the Government, the Contracting Officer shall allow reasonable costs resulting from the stop‐work order in arriving at the termination settlement.

(d) If a stop‐work order is not canceled and the work covered by the order is terminated for default, the Contracting Officer shall allow, by equitable adjustment or otherwise, reasonable costs resulting from the stop‐ work order.

6. INSPECTION OF SERVICES

In accordance with FAR 52.212‐4 CONTRACT TERMS AND CONDITIONS‐‐COMMERCIAL ITEMS (MAR 2009) (DEVIATION I ‐ FEB 2007) for Firm‐Fixed Price orders and FAR 52.212‐4 CONTRACT TERMS AND CONDITIONS COMMERCIAL ITEMS (MAR 2009) (ALTERNATE I OCT 2008) (DEVIATION I – FEB 2007) applies to Time‐and‐

Materials and Labor‐Hour Contracts orders placed under this contract.

7. RESPONSIBILITIES OF THE CONTRACTOR

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City, or otherwise) covering work of this character. If the end product of a task order is software, then FAR 52.227‐14 (Dec 2007) Rights in Data

– General, may apply.

8. RESPONSIBILITIES OF THE ORDERING ACTIVITY

Subject to security regulations, the ordering activity shall permit Contractor access to all facilities necessary to perform the requisite IT Professional Services.

9. INDEPENDENT CONTRACTOR

All IT Professional Services performed by the Contractor under the terms of this contract shall be as an independent Contractor, and not as an agent or employee of the ordering activity.

10. ORGANIZATIONAL CONFLICTS OF INTEREST

a. Definitions.

“Contractor” means the person, firm, unincorporated association, joint venture, partnership, or corporation that is a party to this contract.

“Contractor and its affiliates” and “Contractor or its affiliates” refers to the Contractor, its chief executives, directors, officers, subsidiaries, affiliates, subcontractors at any tier, and consultants and any joint venture involving the Contractor, any entity into or with which the Contractor subsequently merges or affiliates, or any other successor or assignee of the Contractor.

An “Organizational conflict of interest” exists when the nature of the work to be performed under a proposed ordering activity contract, without some restriction on ordering activities by the Contractor and its affiliates, may either (i) result in an unfair competitive advantage to the Contractor or its affiliates or (ii) impair the Contractor’s or its affiliates’ objectivity in performing contract work.

b. To avoid an organizational or financial conflict of interest and to avoid prejudicing the best interests of the ordering activity, ordering activities may place restrictions on the Contractors, its affiliates, chief executives, directors, subsidiaries and subcontractors at any tier when placing orders against schedule contracts. Such restrictions shall be consistent with FAR 9.505 and shall be designed to avoid, neutralize, or mitigate organizational conflicts of interest that might otherwise exist in situations related to individual orders placed against the schedule contract. Examples of situations, which may require restrictions, are provided at FAR 9.508.

11. INVOICES

The Contractor, upon completion of the work ordered, shall submit invoices for IT Professional services. Progress payments may be authorized by the ordering activity on individual orders if appropriate. Progress payments shall be based upon completion of defined milestones or interim products. Invoices shall be submitted monthly for recurring services performed during the preceding month.

12. PAYMENTS

For firm‐fixed price orders the ordering activity shall pay the Contractor, upon submission of proper invoices or vouchers, the prices stipulated in this contract for service rendered and accepted. Progress payments shall be made only when authorized by the order. For time‐and‐materials orders, the Payments under Time‐and‐Materials and Labor‐Hour Contracts at FAR 52.212‐4 (MAR 2009) (ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to time‐and‐materials orders placed under this contract. For labor‐hour orders, the Payment under Time‐and‐Materials and Labor‐Hour Contracts at FAR 52.212‐4 (MAR 2009) (ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to labor‐hour orders placed under this contract. 52.216‐31(Feb 2007) Time‐and‐

Materials/Labor‐Hour Proposal Requirements—Commercial Item Acquisition. As prescribed in 16.601(e)(3), insert the following provision:

(a) The Government contemplates award of a Time‐and‐Materials or Labor‐Hour type of contract resulting from this solicitation.

(b) The offeror must specify fixed hourly rates in its offer that include wages, overhead, general and administrative expenses, and profit. The offeror must specify whether the fixed hourly rate for each labor category applies to labor performed by—

(1) The offeror;

(2) Subcontractors; and/or

(3) Divisions, subsidiaries, or affiliates of the offeror under a common control.

13. RESUMES

Resumes shall be provided to the GSA Contracting Officer or the user ordering activity upon request.

14. INCIDENTAL SUPPORT COSTS

Incidental support costs are available outside the scope of this contract. The costs will be negotiated separately with the ordering activity in accordance with the guidelines set forth in the FAR.

15. APPROVAL OF SUBCONTRACTS

The ordering activity may require that the Contractor receive, from the ordering activity's Contracting Officer, written consent before placing any subcontract for furnishing any of the work called for in a task order.

16. DESCRIPTION OF IT PROFESSIONAL SERVICES AND PRICING

IT PROFESSIONAL SERVICES RATES

SINs 54151S

Consolidated Networks Corporation offers a range of IS & IT services to the government under the GSA Information Technology Schedule contract, including the following areas under Special Item Number (SIN) 54151S as follows:

Automated Information Systems Design and Integration Services (FPDS Code D307): Consolidated Networks Corporation provides the government a new breed of Engineer who specializes in communications convergence.

CNC

offers Classified Support and Engineers that design, install and maintain broadband services, IP communications, intelligent optical mesh networks, SIP-based converged communications systems, and traditional WAN/MAN architectures. Technology architectures of these types are rapidly expanding within enterprises, and are replacing architectures that relied on the single purpose (voice or data) communication model. CNC engineers create a bridge, or as our name suggests consolidates, the Voice, Video, and Data world and provides engineering services to government agencies that are looking to expand the capabilities of their current system architecture or to create the blueprint for their converged and more efficient voice/video/data network. For each project, Consolidated Networks Corporation furnishes complete documentation and deliverables in accordance with the approved methodology for users and systems personnel.

IT Network Management Services (FPDS Code D316): Consolidated Networks Corporation provides the government a new breed of engineers who specialize in communications convergence. Consolidated Networks Corporation provides a range of LAN/WAN telecommunications management services. We design, install, and manage all sizes of networks for voice, data, and secure communications. Functional needs include backbone, enterprise-wide, Internet, and videoconferencing communications. Network systems administration and monitoring are performed according to enterprise and industry standards. For each project Consolidated Networks Corporation furnishes complete documentation and deliverables in accordance with the approved task order.

Other Information Technology Services, Not Elsewhere Classified (FPDS Code D399):

Systems Installation. Consolidated Networks Corporation offers complete installation services for networks, end user computing systems, and COTS and custom software. The installation includes but is not limited to, the analysis of the system being installed; identification of all related tasks and activities; compilation of all needed materials, software, and hardware; design of a comprehensive testing and verification plan; coordination with all affected organizations; full hardware and software installation; execution of the system test plan; participation in the user acceptance test; and post-installation reviews. For each project, Consolidated Networks Corporation furnishes complete documentation and deliverables in accordance with the approved methodology for users and systems personnel.

Strategic Information Technologies Planning, Program Assessment, and Studies. Consolidated Networks Corporation offers services to support the development, analysis, and implementation of information technologiesstrategies and architectures. Services include program planning and assessment, risk/trade-off analyses, requirements analyses, alternatives analyses, and feasibility studies. Unique industry expertise may be provided in specialty areas.

11/15/17 thru 11/15/18 thru 11/15/19 thru 11/15/20 thru 11/15/21 thru

11/14/18 11/14/19 11/14/20 11/14/21 11/14/22

CNC Job Labor Category $/hr $/hr $/hr $/hr $/hr pm Project Manager 108.73$ 110.58$ 112.46$ 114.37$ 116.31$

AA Administrative Support 52.95$ 53.85$ 54.76$ 55.69$ 56.64$

NE 3 Senior Network Engineer 107.45$ 109.28$ 111.14$ 113.02$ 114.95$

NE 2 Network Engineer 2 83.15$ 84.56$ 86.00$ 87.46$ 88.95$

NE 1 Network Engineer 1 74.19$ 75.45$ 76.74$ 78.04$ 79.37$

TW Technical Writer 83.15$ 84.56$ 86.00$ 87.46$ 88.95$

SME Subject Matter Expert 1 146.42$ 148.91$ 151.44$ 154.02$ 156.64$

PA 3 Program Analyst 3 97.47$ 99.13$ 100.81$ 102.53$ 104.27$

Comm Tech 1 IT Technician 1 60.92$ 61.96$ 63.01$ 64.08$ 65.17$

Comm Tech 2 IT Technician 2 63.63$ 64.71$ 65.81$ 66.93$ 68.07$

Comm Tech 3 IT Technician 3 78.52$ 79.85$ 81.21$ 82.59$ 84.00$

ITS 1 IT Support Specialist 1 47.33$ 48.13$ 48.95$ 49.78$ 50.63$

ITS 2 IT Support Specialist 2 59.56$ 60.57$ 61.60$ 62.65$ 63.72$

ITS 3 IT Support Specialist 3 ‐‐ CAD Operator 74.19$ 75.45$ 76.74$ 78.04$ 79.37$

SDBA Senior Database Administrator 184.50$ 187.64$ 190.83$ 194.07$ 197.37$

SDBP Senior Database Programmer 171.13$ 174.04$ 177.00$ 180.00$ 183.06$

CNC GSA Contract -- Labor Category Descriptions

Job Code Labor Category Duties and Responsibilities

Pm Project Manager Functional Responsibility: Serves as the overall implementation manager for a contract and lead for technical projects. Authorized to coordinate activities of the project to meet deadlines and budgets and to resolve conflicting demands of users. Establishes costs and determines resource requirements. Responsible for the administrative, contractual, and financial aspects of projects. Oversees the quality assurance efforts of the contract or project.

Education: Bachelors degree in a technical or management field Minimum/General Experience: 5 years experience in systems engineering or the business/ technology directly relating to the assigned business segment. 3 years of supervisory experience, in a lead or management role, with a demonstrated success in the ability to staff and lead/manage technically oriented projects and personnel. Experienced in directing large efforts as well as multiple concurrent smaller efforts. Knowledgeable of the federal contract and procurement regulations.

AA Administrative Support Functional Responsibility: Provides administrative-type support to technical and management-level personnel. This includes, but is not limited to, documentation planning and support, project administration, general office support, executive secretarial support, human resource planning, event planning and administration, office relocation planning, etc.

Education: High School Diploma or G.E.D. or other equivalent degree program.

NE 3 Senior Network Engineer Functional Responsibility: Supervises and provides technical support in evaluating and resolving network and processor problems. Designs, installs, and may maintain networks that link numerous computing platforms, operating systems, network topologies, and network protocols.

Education: Bachelors degree in a technical field or Professional certification Minimum General Experience: Seven years IT experience including four years supporting network environments and one year supervising network related activities. In-depth knowledge of network management tools, techniques, and procedures. Experienced in developing monitoring, and reporting network performance metrics.

NE 2 Network Engineer 2 Functional Responsibility: Provides technical support in evaluating and resolving network and processor problems. Responsible for the design, configuration, and implementation of networks.

Education: Bachelors degree in a technical field or Professional certification Minimum/General Experience: Five years ADP technical experience including three years supporting network environments. Knowledge of network management tools and techniques. Experienced at measuring and reporting network performance.

NE 1 Network Engineer 1 Functional Responsibility: Provides technical support in evaluating and resolving network and processor problems. Responsible for the configuration and implementation of networks.

Education: Bachelors degree in a technical field or Professional certification Minimum/General Experience: Three years ADP technical experience including two years supporting network environments. Knowledge of network management tools and techniques. Experienced at measuring and reporting network performance.

TW Technical Writer Functional Responsibility: Develops, writes, and edits IT documentation incorporating information from users, IT development personnel, and management personnel.

Develops reports from written and electronic input media. Prepares graphic presentations of technical information for both technical and non-technical users.

Assists in requirements analysis and preliminary system design activities through participation in user interviews.

Education: Bachelors degree

Minimum/General Experience: Three years experience in the development of technical documentation using automated tools including desktop publishing.

Experienced in developing ADP systems and user documentation in accordance with specified standards.

SME Subject Matter Expert 1 Functional Responsibility: Expert consulting in highly specialized, leading edge information technologies and methodologies. Provides highly technical specialized guidance with regard to automated solutions to complex information processing problems. Often called upon as one of a few nationally recognized specialists with unique knowledge and skills.

Education: Masters degree in a technical or management field related to issues to be supported.

Minimum/General Experience: Ten years of progressively responsible experience involving information technology and related systems and often unique specialization. Recognized as an industry or specialty expert especially in the use of information processing, telecommunications, or security systems, through exposure such as publications, research, teaching, and speeches. Experience in traditional videography and videography of subject matter suitable for digitalization and broadcast over the internet.

PA 3 Program Analyst 3 Functional Responsibility: Responsible for applying research, specialized technical and analytical skills and techniques in the support of implementation responsibilities related to major operations and programs of national significance. Assists in the definition of program requirements, assessment of required resources, identification of processes and procedures, addressing of outstanding issues for resolution and description of alternative approaches. Proposes and/or develops methodologies for the redaction of operation/program data into appropriate electronic/hard copy format.

Education: Bachelors degree Minimum/General Experience: Five years experience in technical/policy support and analysis of complex programs, tasks, processes and procedures.

Experienced in program planning, training, coordination, implementation and documentation.

Comm Tech

IT Technician 1 Functional Responsibility: Installs systems and components such as cabling, circuitry, and electronics for complete system connectivity, communication, and operation. Does cabling for voice and data transmission in accordance with EIA/TIA standards. Assists higher level technicians by performing such tasks as replacing components, wiring circuits, and taking test readings;

repairing simple electronic equipment; and using tools and common test instruments (e.g. multimeters, audio signal generators, and oscilloscopes). Capable of entering basic information into computer system to initiate operations or generate reports. Receives technical guidance as required from higher level technicians or supervisors. Work is typically spot checked or reviewed in detail when new or advanced.

Education: High School Diploma or G.E.D. or other equivalent degree program.

Minimum/General Experience: Two years experience in the installation of automatic data processing systems.

Possesses working knowledge of applicable standards and building codes.

Comm Tech

IT Technician 2 Functional Responsibility: Installs systems and components such as cabling, circuitry, and electronics for complete system connectivity, communication, and operation. Does cabling for voice and data transmission in accordance with EIA/TIA standards. Assists higher level technicians by performing such tasks as replacing components, wiring circuits, and taking test readings;

repairing simple electronic equipment; and using tools and common test instruments (e.g. multimeters, audio signal generators, and oscilloscopes). Capable of entering basic information into computer system to initiate operations or generate reports. Receives technical guidance as required from higher level technicians or supervisors. Work is typically spot checked or reviewed in detail when new or advanced.

Education: High School Diploma or G.E.D. or other equivalent degree program.

Minimum/General Experience: Three years experience in the installation and maintenance of automatic data processing systems. Possesses working knowledge of applicable standards and building codes. Knowledgeable of technologies such as the use and application of test equipment to determine continuity and performance measurement. Experienced with system installation technologies such as copper, fiber optic broad band cabling systems, and black box technologies.

Comm Tech

IT Technician 3 Functional Responsibility: Installs, maintains, and repairs systems and components such as cabling, circuitry, and system electronics for complete system connectivity, communication, and operation. Does cabling for voice and data transmission in accordance with EIA/TIA standards. Applies advanced technical knowledge to solve unusually complex problems such as those solutions that cannot be readily found in technical literature. Able to identify malfunctions and accommodate engineering changes. Must have experience and knowledge in detailed interrelationships of system components, and judgment in performing such tasks as making circuit analysis, calculating wave forms, tracing relationships in signal flow, and regularly using complex test equipment. May be experienced in computer system operations or report generation. Work may be reviewed for compliance with accepted practices and work assignments. May provide technical guidance to lower level technicians.

Education: High School Diploma or G.E.D. or other equivalent degree program.

Minimum/General Experience: Five years experience in the installation and maintenance of automatic data processing systems. Possesses working knowledge of applicable standards and building codes. Experienced with technologies such as the use and application of test equipment to determine continuity and performance measurement. Experienced with system installation technologies such as terminating and testing copper and fiber optic broad band cabling systems and black box technologies. Able to perform component level repairs and calibration such as with copper and fiber optic broadband cable system headends, frontend processors, network management systems, and related test equipment. Able to integrate new technologies to existing system components such as voice and data systems while ensuring compatibility.

ITS 1 IT Support Specialist 1 Functional Responsibility: Performs variety of professional support functions using organization’s office automation systems. Able to advise other staff in the use of IT systems and their function relevant to the project mission. Advises management and staff of relevant issues, policies, and procedures. Performs business and technical analyses as required. Generates reports on various technical and administrative issues.

Education: High School Diploma or G.E.D. or other equivalent degree program, and one professional certification

Minimum/General Experience: Two years experience in providing general information technology systems and project support. Experienced with desktop publishing and office automation systems. Knowledgeable of project operations and relationship with support functions.

ITS 2 IT Support Specialist 2 Functional Responsibility: Performs variety of professional support functions using organization’s office automation systems. Able to advise other staff in the use of IT systems and their function relevant to the project mission. Advises management and staff of relevant issues, policies, and procedures. Performs business and technical analyses as required. Generates reports on various technical and administrative issues. May supervise other IT Support Specialists.

Education: Associates degree and one professional certification

Minimum/General Experience: Four years experience in providing general information technology systems and project support. Experienced with desktop publishing and office automation systems. Knowledgeable of project operations and relationship with support functions.

ITS 3 IT Support Specialist 3 -- CAD Operator

Functional Responsibility: Performs variety of professional support functions using organization’s office automation systems. Able to advise other staff in the use of IT systems and their function relevant to the project mission. Advises management and staff of relevant issues, policies, and procedures. Performs business and technical analyses as required. Provides CAD drawings in support of network engineering design and implementation projects. Generates reports on various technical and administrative issues. May supervise other IT Support Specialists.

Education: High School Diploma or G.E.D. or other equivalent degree program.

Minimum/General Experience: Four years experience in providing general information technology systems and project support. Experienced with desktop publishing and office automation systems. Knowledgeable of project operations and relationship with support functions.

DBA 3 Snr DB Administrator 5+ years Oracle/People Soft Database/Systems

Administration. Experience implementing systems in a large scale Oracle environment. Other experience:

PeopleSoft migrations, performance monitoring, trouble shooting and problem resolution.

Enhancements, upgrades and assisting with module implementations.

Strong Oracle People Soft HCM and ELM, candidate gateway,…