Abatement_IDIQ_line_Items_020217.pdf

Item No. Description Unit Unit Price

PREPARATION OF ABATEMENT AREA

Contractor's equipment and personal set-up at job site and move-out at completion of work. This cost also to include the construction and dismantling of decontamination facilities and showers.

Lump Sum

(per set-up requiring decon sys) $450.00

2 Special cleaning

2A Special cleaning of walls and floors or directed surfaces for asbestos fiber control S.F. $0.45

2B Special cleaning of walls, floors or directed surfaces for fungal spore control S.F. $0.45

2C Special cleaning of walls, floors or directed surfaces for lead dust

3 Masking and sealing with plastic sheeting

3A Masking and sealing with single layer plastic sheeting only (6-mil) S.F. $0.73

3B

Masking and sealing with double layer plastic sheeting only. (6 mil) To be used for floors, windows, and isolation barriers S.F. $1.46

3C Single Layer (4-mil) S.F. $0.62

3D Double Layer (4-mil) S.F. $1.24

4 Masking and sealing for isolation barriers

4A

Masking and sealing with single layer plastic sheeting and wood studs. To be used for isolation barriers. S.F. $1.50

4B masking and sealing with double layer plastic sheeting and wood studs (6-mil) S.F. $1.67

5 Glovebag (See Drawing A-16) Each $7.00

6 Scaffolding - rolling and steel tubular stationary

6A Rolling scaffolding (up to 20 ft. high) Each $135.00

6B Steel - tubular stationary scaffolding (up to 30 ft. high) C.F. $0.15

Clearing all fixed and movable furniture equipment, etc., and re-establishing after work completion S.F. $0.45

8 Temporary "cap-off" HVAC ducts

8A up to 36 sq. in. Sq. Inches $0.40

8B 36 to 72 sq. in. Sq. Inches $0.37

8C 72 to 144 sq. in. Sq. Inches $0.34

8D 144 to 288 sq. in. Sq. Inches $0.31

8E over 288 sq. in. Sq. Inches $0.28

9 Provide 2" thick support planks S.F. $2.01

BULK REMOVAL AND DEMOLITION

100 Remove asbestos insulation from boiler and breeching. S.F. $3.52

101 Remove asbestos insulation from HVAC ducts

101A Semi-rigid insulation S.F. $2.04

101B Flexible insulation S.F. $1.80

Remove existing suspended acoustical ceiling tile where grid system is not disturbed.

102A Remove, clean and re-install ceiling tiles plus grid lights S.F. $1.42

102B Remove, clean ceiling tiles plus grid and lights S.F. $1.23

102C Remove, clean ceiling tiles plus installing GSA Replacement Ceiling tiles S.F. $1.74

102D Remove and reinstall existing suspended acoustical ceiling tile without cleaning them. S.F. $1.00

Remove, clean and re-install existing suspended acoustical ceiling tile system complete with grid and tile S.F. $2.32

Remove existing suspended acoustical ceiling tile system complete with grid and tile, and dispose of as asbestos waste S.F. $1.60

105 Remove cemented-on or concealed spline ceiling system S.F.

105A Remove cemented-on ceiling tiles, no ACM disturbed S.F. $0.60

105B Remove cemented-on ceiling tiles, ACM above tiles S.F. $1.60

105C Remove cemented-on ACM ceiling tiles and/or mastic S.F. $1.60

105D Remove cemented on ceiling tiles (ACM equals tiles and mastic) S.F. $2.20

105E Remove concealed spline tiles, no ACM disturbed S.F. $0.70

105F Remove asbestos containing concealed spline tiles, S.F. $1.10

105G Remove concealed spline tiles, ACM above tiles S.F. $2.10

106 Remove acoustical plaster ACM from ceiling/walls and backfill base surface S.F.

106A Remove ACM from plaster ceiling/wall S.F. $2.66

106B Remove both ACM and plaster ceiling/wall S.F. $4.50

106C Remove both ACM and sheet rock ceiling/wall S.F. $2.22

106D Backfill plaster only if specified in D.O. S.F. $0.30

107 Remove asbestos insulation from pipe and fittings (regular containment) L.F.

107A 2" Insulation size (outside diameter) L.F. $2.04

107B 3" L.F. $3.06

107C 4" L.F. $4.07

107D 5" L.F. $5.09

107E 6" L.F. $6.11

107F 7" L.F. $7.13

107G 8" L.F. $8.14

107H 9" L.F. $9.25

107I 10" L.F. $10.18

107J 11" L.F. $11.20

107K 12" L.F. $12.21

107L 13" L.F. $13.23

107M 14" L.F. $14.25

107N 15" L.F. $15.27

107O 16" L.F. $20.85

107P 18" L.F. $23.46

107Q 20" L.F. $26.07

107R 22" L.F. $28.67

107S 24" L.F. $31.28

107T Over 24" S.F. $4.98

108 Remove asbestos insulation from pipe and fittings (glovebag method) L.F.

108A 2" Insulation size (outside diameter) L.F. $3.15

108B 3" L.F. $4.72

108C 4" L.F. $6.20

108D 5" L.F. $7.77

108E 6" L.F. $9.35

108F 7" L.F. $10.83

108G 8" L.F. $12.49

108H 9" L.F. $14.06

108I 10" L.F. $15.54

108J 11" L.F. $17.12

108K 12" L.F. $18.69

108L 13" L.F. $20.54

108M 14" L.F. $21.83

108N 15" L.F. $23.31

108O 16" L.F. $24.87

108P 18" L.F. $27.97

108Q 20" L.F. $31.08

108R 22" L.F. $34.19

108S 24" L.F. $37.30

108T Over 24" S.F. $5.94

Remove asbestos insulation from fittings only (i.e.. valves, flanges, tees, etc.) Use only if pipe insulation remains (regular containment)

109A 2" Insulation size (outside diameter) L.F. $0.56

109B 3" L.F. $1.39

109C 4" L.F. $2.41

109D 5" L.F. $3.80

109E 6" L.F. $5.65

109F 7" L.F. $7.68

109G 8" L.F. $10.27

109H 9" L.F. $13.50

109I 10" L.F. $16.10

109J 11" L.F. $19.52

109K 12" L.F. $23.41

109L 13" L.F. $27.48

109M 14" L.F. $32.10

109N 15" L.F. $37.00

109O 16" L.F. $39.47

109P 18" L.F. $44.40

109Q 20" L.F. $49.34

109R 22" L.F. $54.27

109S 24" L.F. $59.20

109T Over 24" S.F. $9.43

Remove asbestos insulation from fittings only. (i.e., valves, flanges, tees, etc.) using glove bags. Use only if pipe insulation remains. L.F.

110A 2" Insulation size (outside diameter) L.F. $0.84

110B 3" L.F. $2.13

110C 4" L.F. $3.61

110D 5" L.F. $5.83

110E 6" L.F. $8.61

110F 7" L.F. $11.66

110G 8" L.F. $15.64

110H 9" L.F. $19.89

110I 10" L.F. $24.61

110J 11" L.F. $29.88

110K 12" L.F. $35.80

110L 13" L.F. $42.90

110M 14" L.F. $49.12

110N 15" L.F. $56.52

110O 16" L.F. $60.29

110P 18" L.F. $67.83

110Q 20" L.F. $75.36

110R 22" L.F. $82.90

110S 24" L.F. $90.43

110T Over 24" S.F. $14.40

111 Remove insulation from tanks/chillers

111A one layer or less of wire mesh S.F. $2.04

111B more than one layer of wire mesh S.F. $3.50

112 Remove rigid cementitious asbestos

112A Remove rigid ACM panel boards from ceilings, walls, cooling towers, etc. S.F. $2.04

112B Remove cooling tower "cores" (fill) material C.F. $4.00

113 Remove wall partitions

113A Non-ACM wood partitions S.F. $1.60

113B ACM wood partitions S.F. $2.30

113C Non-ACM metal partitions S.F. $1.60

113D ACM metal partitions S.F. $2.30

114 Remove vinyl asbestos tile (VAT) and mastic on a concrete floor

114A Single layer of VAT and mastic S.F. $1.80

114B Additional layers of VAT and mastic S.F. $0.60

114C Remove ACM mastic (only) from concrete floors S.F. $1.00

115 Remove vinyl asbestos tile and mastic on wood flooring

115A Single layer of VAT and mastic removed. No wooden flooring must be removed S.F. $1.80

115B Single layer of VAT and mastic. Some wooden flooring must be removed S.F. $2.70

115C Additional layers of VAT and mastic S.F. $0.60

115D Remove ACM mastic (only) from wooden flooring S.F. $1.29

116 Remove carpeting from floor

116A Carpet without mastic S.F. $0.45

116B Carpet with non-ACM mastic or on non VAT/non-ACM mastic S.F. $0.45

116C1 Carpet on VAT/mastic NOT to be removed (RACM pulled with carpet below cutoff limit) S.F. $0.60

116C2

Carpet on VAT/mastic NOT to be removed (RACM pulled with carpet above cuttoff llimit) S.F. $1.80

116D1 Carpet on VAT/mastic to be removed (RACM pulled with carpet below cutoff limit) S.F. $0.60

116D2 Carpet on VAT/mastic to be removed (RACM pulled with carpet above cutoff limit) S.F. $0.90

116E Carpet Tiles S.F. n/a

116F Carpet Tiles with non-ACM mastic or on non VAT/non-ACM mastic S.F. $0.45

116G1

Carpet Tiles on VAT/mastic NOT to be removed (RACM pulled with carpet below cutoff limit) S.F. $0.60

116G2

Carpet Tiles on VAT/mastic NOT to be removed (RACM pulled with carpet above cuttoff llimit) S.F. $1.80

116H1 Carpet Tiles on VAT/mastic to be removed (RACM pulled with carpet below cutoff limit) S.F. $0.60

116H2 Carpet Tiles on VAT/mastic to be removed (RACM pulled with carpet above cutoff limit) S.F. $0.90

117 Remove asphalt planks and mastic S.F. $4.27

Remove asbestos insulation or fire proofing from beams, columns, joists or other structural surfaces plus any overspray. Clean thoroughly, encapsulate and leave surfaces ready fro new fireproofing. S.F. $2.70

119 Remove built-up roofing

119A 3 ply construction debris (Non-ACM) S.F. $0.50

119B 3 ply asbestos waste S.F. $1.00

119C 5 ply construction debris (Non-ACM) S.F. $0.85

119D 5 ply asbestos waste S.F. $1.70

Selective demolition - cut opening in partition. Maximum size is 48" width by ceiling height

RE Gypsum board Each $100.00

120A Plaster Each $135.00

120B Masonry Each $160.00

Selective demolition - cut opening in partition. Partition, wall or floor slab up to 8" thick, round or square holes of dimensions indicated.

121A Masonry up to 4" Each $50.00

121B Masonry 4" plus to 8" Each $75.00

121C Concrete up to 4" Each $140.00

121D Concrete 4" plus to 8" Each $190.00

Selective demolition - cut opening in ceiling (1" to 12"). Openings include round or square holes of dimensions indicated

122A Gypsum board Each $22.00

122B Plaster Each $30.00

122C Acoustical tile Each $22.00

123 Remove AHU ducting and fan unit gaskets L.F. $3.80

124 Remove cove moulding

124A 4" cove S.F. $0.36

124B 6" cove S.F. $0.43

125 Remove fiberglass batts above ceiling and/or lights

125A If construction debris - no ACM S.F. $0.10

125B If asbestos waste S.F. $0.15

126 Demolition of pipes

126A Piping with no ACM insulation

126A1 Pipes [ 2" diameter L.F. $1.78

126A2 > 2" and [ 4" diameter L.F. $2.38

126A3 > 4" and [ 8" diameter L.F. $7.15

126A4 > 8" and [ 16" diameter L.F. $11.19

126A5 > 16" and [ 32" diameter L.F. $22.38

126B Piping with ACM insulation

126B1 Pipes [ 2" diameter L.F. $2.62

126B2 > 2" and [ 4" diameter L.F. $3.50

126B3 > 4" and [ 8" diameter L.F. $10.52

126B4 > 8" and [ 16" diameter L.F. $17.50

126B5 > 16" and [ 32" diameter L.F. $35.00

127 HVAC ducting demolition

127A Ducting with no ACM insulation

127A1 4"H x 8"W L.F. $1.28

127A2 4"H x 10"W L.F. $1.35

127A3 4"H x 14"W L.F. $1.42

127A4 6"H x 8"W L.F. $1.55

127A5 6"H x 12"W L.F. $1.71

127A6 6"H x 18"W L.F. $1.90

127A7 10"H x 12"W L.F. $2.05

127A8 10"H x 18"W L.F. $2.23

127A9 10"H x 24"W L.F. $2.33

127A10 12"H x 18"W L.F. $3.01

127A11 12"H x 24"W L.F. $3.41

127A12 12"H x 48"W L.F. $3.61

127A13 18"H x 24"W L.F. $3.82

127A14 18"H x 36"W L.F. $4.06

127A15 18"H x 48"W L.F. $4.34

127A16 30"H x 36"W L.F. $4.57

127A17 30"H x 48"W L.F. $4.83

127A18 30"H x 72"W L.F. $5.10

127B Ducting with ACM insulation

127B1 4"H x 8"W L.F. $1.89

127B2 4"H x 10"W L.F. $1.99

127B3 4"H x 14"W L.F. $2.09

127B4 6"H x 8"W L.F. $2.29

127B5 6"H x 12"W L.F. $2.52

127B6 6"H x 18"W L.F. $2.80

127B7 10"H x 12"W L.F. $3.02

127B8 10"H x 18"W L.F. $3.29

127B9 10"H x 24"W L.F. $3.43

12710 12"H x 18"W L.F. $4.43

124B11 12"H x 24"W L.F. $5.02

127B12 12"H x 48"W L.F. $5.32

127B13 18"H x 24"W L.F. $5.63

127B14 18"H x 36"W L.F. $5.98

127B15 18"H x 48"W L.F. $6.39

127B16 30"H x 36"W L.F. $6.73

127B17 30"H x 48"W L.F. $7.11

127B18 30"H x 72"W L.F. $7.51

128 Demolition of walls/ceiling

128A Gypsum board

128A1 on wood/metal frame S.F. $1.53

128A2 on suspension system S.F. $0.43

128B Plaster S.F. $0.85

128C Masonry S.F. $6.70

128D Concrete S.F. $2.72

128E Wood S.F. $5.31

129 Remove HVAC Duct Insulation by glovebag

129A Rectangular Ducting

129A1 4"D x 8"W L.F. $12.49

129A2 4"D x 10"W L.F. $15.54

129A3 4"D x 14"W L.F. $21.83

129A4 6"D x 8"W L.F. $12.49

129A5 6"D x 12"W L.F. $18.69

129A6 6"D x 18"W L.F. $24.89

129A6 10"D x 12"W L.F. $18.69

129A8 10"D x 18"W L.F. $24.89

129A9 10"D x 24"W L.F. $33.15

129B Circular Ducting

129B1 4" diameter L.F. $6.20

129B2 6" diameter L.F. $9.35

129B3 8" diameter L.F. $12.49

129B4 10" diameter L.F. $15.54

129B5 12" diameter L.F. $18.69

129B6 14" diameter L.F. $21.83

129B7 16" diameter L.F. $24.89

129B8 18" diameter L.F. $29.02

129B9 20" diameter L.F. $33.15

130 Remove vinyl wallpaper S.F. $1.00

CONSTRUCTION AND REPAIR

Install new suspended acoustical ceiling complete with 5/8" mineral board tile and suspension system with 2'x4' grid S.F. $4.17

201 Re-insulate HVAC duct work

201A Semi-rigid 1-1/2" thick fiberglass board of 3 lb density S.F. $9.77

201B Flexible 2" thick fiberglass duct insulation of 3 lb density S.F. $2.96

202 Re-insulate tanks/chillers, etc.

202A Base amount Each $300.00

202B 1" thick insulation S.F. $6.00

202C 1-1/2" thick insulation S.F. $7.00

Insulate boilers, breeching or tanks complete with 1-1/2" thick calcium silicate block. (See Drawing A-13) S.F. $30.00

203A

Insulate boilers/boiler breeching complete with 4" thick calcium silicate block insulation which shall be covered with 1/2" thick layer of insulation cement and then with an aluminum jacket S.F. $29.39

204 Install 1" sprayed-on acoustic surface on ceiling/wall S.F. $6.00

Install 1, 2, 3, or 4 hour fire rated sprayed-on fireproofing on underside of decks above or on beams and columns, and open web joists.

205A 1-hr. fire-rated F/P S.F. $2.00

205B 2-hr. fire-rated F/P S.F. $2.50

205C 3-hr. fire-rated F/P S.F. $3.00

205D 4-hr. fire-rated F/P S.F. $3.50

205E Application of F/P Sealant S.F. $0.45

206 Remove and reinstall existing light fixtures Each $110.00

207 Re-hang suspended ceiling lights Each $45.00

Replace pipe and fitting insulation complete with 1" thick fiberglass insulation, with all service jacket (fiberglass 25 ASJ/SSL) - for 1" through over 20" pipe sizes

208A 1" and below pipe size L.F. $4.00

208B 1" to 1-1/2" L.F. $4.31

208C 2" to 2-1/2" L.F. $4.84

208D 3" to 3-1/2" L.F. $5.56

208E 4" L.F. $6.33

208F 5" L.F. $6.93

208G 6" L.F. $7.87

208H 7" L.F. $8.86

208I 8" L.F. $9.85

208J 10" L.F. $11.11

208K 12" L.F. $12.54

208L 14" L.F. $13.15

208M 16" L.F. $15.68

208N 18" L.F. $16.06

208O 20" L.F. $18.43

208P Over 20" S.F. $3.17

Replace pipe and fitting insulation complete with 1-1/2" thick fiberglass insulation, with all service jacket (fiberglass 25 ASJ/SSL) - for 1" through over 20" pipe sizes

209A 1" and below pipe size L.F. $4.81

209B 1" to 1-1/2" L.F. $5.17

209C 2" to 2-1/2" L.F. $5.83

209D 3" to 3-1/2" L.F. $6.60

209E 4" L.F. $7.32

209F 5" L.F. $7.98

209G 6" L.F. $9.08

209H 7" L.F. $10.07

209I 8" L.F. $11.17

209J 10" L.F. $12.98

209K 12" L.F. $13.92

209L 14" L.F. $15.29

209M 16" L.F. $17.33

209N 18" L.F. $19.03

209O 20" L.F. $20.57

209P Over 20" S.F. $3.68

Replace pipe and fitting insulation complete with 2" thick fiberglass insulation, with all service jacket (fiberglass 25 ASJ/SSL) - for 1-1/4" through 20" pipe sizes.

210A 1-1/4" to 1-1/2" No. fittings $5.78

210B 2" to 2-1/2" No. fittings $6.22

210C 3" to 3-1/2" No. fittings $6.93

210D 4" No. fittings $7.92

210E 5" No. fittings $9.79

210F 6" No. fittings $11.06

210G 7" No. fittings $12.43

210H 8" No. fittings $13.81

210I 10" No. fittings $16.00

210J 12" No. fittings $17.44

210K 14" No. fittings $19.14

210L 16" No. fittings $21.73

210M 18" No. fittings $23.65

210N 20" No. fittings $26.40

210O Over 20" S.F. $4.73

Replace pipe fitting insulation complete with 1" fiberglass insulation, with all service jacket (fiberglass 25 ASJ/SSL) - for 1" through over 20" pipe sizes.

211A 1" and below pipe size without flange No. fittings $12.00 with flange, additional price Per flange $16.00

211B 1-1/4" to 1-1/2" No. fittings $12.93 with flange, additional price Per flange $17.24

211C 2" to 2-1/2" No. fittings $14.52 with flange, additional price Per flange $19.36

211D 3" to 3-1/2" No. fittings $16.68 with flange, additional price Per flange $22.24

211E 4" No. fittings $18.99 with flange, additional price Per flange $25.32

211F 5" No. fittings $20.79 with flange, additional price Per flange $27.72

211G 6" No. fittings $23.61 with flange, additional price Per flange $31.48

211H 7" No. fittings $26.58 with flange, additional price Per flange $35.44

211I 8" No. fittings $29.55 with flange, additional price Per flange $39.40

211J 10" No. fittings $33.33 with flange, additional price Per flange $44.44

211K 12" No. fittings $37.62 with flange, additional price Per flange $50.16

211L 14" No. fittings $39.45 with flange, additional price Per flange $52.60

211M 16" No. fittings $47.04 with flange, additional price Per flange $62.72

211N 18" No. fittings $48.18 with flange, additional price Per flange $64.24

211O 20" No. fittings $55.29 with flange, additional price Per flange $73.72

211P Over 20" S.F. $10.57 with flange, additional price $10.57

Replace pipe fitting insulation complete with 1-1/2" fiberglass insulation with, all service jacket (fiberglass 25 ASJ/SSL) - for 1" through over 20" pipe sizes.

212A 1" and below pipe size without flange No. fittings $14.43 with flange, additional price Per flange $19.24

212B 1-1/4" to 1-1/2" No. fittings $15.51 with flange, additional price Per flange $20.68

212C 2" to 2-1/2" No. fittings $17.49 with flange, additional price Per flange $23.32

212D 3" to 3-1/2" No. fittings $19.80 with flange, additional price Per flange $26.40

212E 4" No. fittings $21.96 with flange, additional price Per flange $29.28

212F 5" No. fittings $23.94 with flange, additional price Per flange $31.92

212G 6" No. fittings $27.24 with flange, additional price Per flange $36.32

212H 7" No. fittings $30.21 with flange, additional price Per flange $40.28

212I 8" No. fittings $33.51 with flange, additional price Per flange $44.68

212J 10" No. fittings $38.94 with flange, additional price Per flange $51.92

212K 12" No. fittings $41.76 with flange, additional price Per flange $55.68

212L 14" No. fittings $45.87 with flange, additional price Per flange $61.16

212M 16" No. fittings $51.99 with flange, additional price Per flange $69.32

212N 18" No. fittings $57.09 with flange, additional price Per flange $76.12

212O 20" No. fittings $61.71 with flange, additional price Per flange $82.28

212P Over 20" S.F. $11.80 with flange, additional price $11.80

Replace pipe fitting insulation complete with 2" fiberglass insulation, with all service jacket (fiberglass 25 ASJ/SSL) - for 1-1/4" through over 20" pipe sizes

213A 1-1/4" to 1-1/2" No. fittings $17.34 with flange, additional price Per flange $23.12

213B 2" to 2-1/2" No. fittings $20.79 with flange, additional price Per flange $27.72

213C 3" to 3-1/2" No. fittings $23.76 with flange, additional price Per flange $31.68

213D 4' No. fittings $26.58 with flange, additional price Per flange $35.44

213E 5" No. fittings $29.37 with flange, additional price Per flange $39.16

213F 6" No. fittings $33.18 with flange, additional price Per flange $44.24

213G 7" No. fittings $37.29 with flange, additional price Per flange $49.72

213H 8" No. fittings $41.43 with flange, additional price Per flange $55.24

213I 10" No. fittings $48.00 with flange, additional price Per flange $64.00

213J 12" No. fittings $52.32 with flange, additional price Per flange $69.76

213K 14" No. fittings $57.42 with flange, additional price Per flange $76.56

213J 16" No. fittings $65.19 with flange, additional price Per flange $86.92

213M 18" No. fittings $70.95 with flange, additional price Per flange $94.60

213N 20" No. fittings $79.20 with flange, additional price Per flange $105.60

213O Over 20" S.F. $15.14 with flange, additional price Per flange $15.14

Install bent metal plate bumper guard around piping and insulation. (See Drawing A-

15). Pound $4.90

215 Painting of new materials and repaired surfaces with 2 coats S.F. $1.20

216 Stenciled labels Each $0.13

217 Patch holes in pipe, duct or boiler insulation (See Drawing A-1) S.F. $10.51

218 Patch cracks and splits in pipe lagging (See Drawing A-2) S.F. $9.92

219 Repair crack in pipe insulation (See Drawing A-3) S.F. $10.40

Seal exposed ends of pipe insulation at fittings, elbows and wall openings. Mortar bullet. (See Drawing A-4) S.F. $18.00

221 Repair boiler lagging (See Drawing A-5) S.F. $9.00

222 Repair boiler insulation and/or boiler breeching insulation (See Drawing A-6) S.F. $36.00

223 Repair insulation at pipe support or pipe hanger (See Drawing A-7) S.F. $150.00

224 Repair of missing pipe insulation (See Drawing A-8) S.F. $13.80

225 Repair duct insulation (See Drawing A-9) S.F. $22.00

Repair pipe elbow or pipe fitting using fiberglass insulation and PVC pre-formed cover. (See Drawing A-10) Each $30.00

227 Repair pipe insulation and install PVC Cover (See Drawing A-11) S.F. $22.00

228 Repair pipe insulation and install corrugated metal jacketing (See drawing A-12) S.F. $24.00

229 Repair damaged flat surface on HVAC duct liners S.F. $4.00

230 Install canvas wrap over ducting or pipe insulation S.F. $1.00

231 Install "cheap-o" wrap over "bared" condensed water or chilled water lines S.F. $1.00

232 Install boards on raised floors/carpets

232A 1/2" plywood uncaulked S.F. $0.97

232B 5/8" plywood uncaulked S.F. $1.17

232C 3/4" plywood uncaulked S.F. $1.34

232D 1/2" plywood caulked S.F. $1.54

232E 5/8" plywood caulked S.F. $1.81

232F 3/4" plywood caulked S.F. $2.04

232G 1/2" wafer boards uncaulked S.F. $0.86

232H 1/2" wafer boards caulked S.F. $1.43

233 Install roofing felt on raised floors S.F. $0.32

234 Install corrugated cardboard on carpeting S.F. $0.32

235 Install and anchor furring to hold poly in place L.F. $0.75

236 Install, anchor and caulk sheet metal moulding along "WF" and "I" beams S.F. $0.32

237 Install acoustic ceiling tiles and grid furnished by GSA

238 Install suspended acoustical ceiling tiles, including new grids and wires S.F. $1.04

239 Temporary gasket replacement L.F. $69.54

ENCLOSURE AND ENCAPSULATION

Install a 5/8" gypsum board enclosure to seal off asbestos containing materials.

Thoroughly bed and tape, and seal all joints of the gypsum board to effect an air tight enclosure. Spray the sealed enclosure with two coats of an encapsulation

(see work item 42 for minimum coat desired). S.F. $3.00

Spray encapsulation sealant on all surfaces including ceilings, columns, beams, joists, deck, walls, and ducts. Two coats at 74 s.f. per gallon, per coat, over insulation, acoustical, or fireproofing. (See Drawing A-14) S.F. $1.20

302 Spray a "lockdown" mist on "bared" surfaces and on containment enclosure poly. S.F. $0.30

Spray Fungicidal Protective Coating on building surfaces including, but not limited to, ceilings, beams, columns, joists, deck, walls, pipes, insulation and ducts. One coat at 80 s.f. per gallon. S.F. $0.62

SAMPLING AND ANALYSIS

Bulk samples - including testing laboratory analysis by Polarized Light Microscopy

(PLM) and Report Each $30.00

Air monitoring samples including "on-site" analysis by Phase Contrast Microscopy

(PCM) and report. There shall also be testing during removal, outside of the enclosure, at areas where employees or tenants will be working. (See Specification

Section 02085, paragraph 4.02B) Each $70.00

401A Air monitoring samples - collection only Each $14.62

Air monitoring samples including testing laboratory analysis Transmission Electron

Microscopy (TEM) and report. (See Specification Section 02085, paragraph 4.02B) Each $100.00

403 Toxicity Characteristic Leaching Procedure (TCLP) testing Each $550.00

MISCELLANEOUS

500 Additional copies of summary air monitoring test report

500A 1 copy, small delivery order (less than 50 air samples) Total $3.00

500B 2 copies, small delivery order (less than 50 air samples) Total $6.00

500C 1 copy, medium delivery order (50 to 250 air samples) Total $15.00

500D 2 copies, medium delivery order (50 to 250 air samples) Total $30.00

500E 1 copy, large delivery order (greater than 250 air samples) Total $30.00

500F 2 copies, large delivery order (greater than 250 air samples) Total $60.00

"Box-in" protect computers and other electronic hardware from abatement activities S.F. $0.71

502 Video pictures, pre-asbestos and post-asbestos abatement conditions Each $600.00

503 Dumpsite disposal charge for lead waste Each $455.00