GS-07P-13-HH-D-0012_Amendment_0002.pdf

General Services Administration Public Buildings Service

Region 7

Solicitation GS-07P-13-HH-D-0012 IDIQ Construction for GSA Federally-Owned and -Leased Federal Facilities in the Oklahoma West

Zone

SOLICITATION NUMBER: GS-07P-13-HH-D-0012

SERVICE: Multiple Award, Indefinite Delivery/Indefinite Quantity (IDIQ) Contract for Construction, Repair & Alteration Services for GSA Federally-

Owned and -Leased Facilities in the Western

Area of Oklahoma

LOCATION(S): Multiple

PERIOD OF PERFORMANCE: One (1) Base and Four (4) One-Year Options

SOLICITATION ISSUE DATE: April 22, 2013

PRE-PROPOSAL MEETING: May 2nd, 2013, 1:00 PM, Central Standard Time

Pre-Proposal Conference at the Oklahoma City

Federal Courthouse Building, 200 NW 4th Street, Suite 4012, Oklahoma City, OK 73102-3026 OR at the Lanham Federal Building, 819 Taylor St., Room 12A1, Fort Worth, TX 76102

PRE-REGISTRATION REQUIRED

QUESTIONS: The final submission date for questions is June

17th, 2013. Questions must be sent via email to Carolina McGillick at Carolina.mcgillick@gsa.gov.

OFFER RECEIPT DATE/TIME: June 24th, 2013, 2:00 PM, Central Standard Time

THIS PROCUREMENT IS 100% SMALL BUSINESS SET-ASIDE

The General Services Administration (GSA) is setting aside this contract under the following clause found in the Agreement: FAR 52.219-6

(“Notice of Total Small Business Set Aside”)

PROPERTY OF THE UNITED STATES GOVERNMENT COPYING, DISSEMINATION, OR

DISTRIBUTION OF THESE DRAWINGS, PLANS, OR SPECIFICATIONS TO

UNAUTHORIZED USERS IS PROHIBITED

Do not remove this notice

Properly destroy documents when no longer needed

NSN 7540-01-152-8070 STANDARD FORM 30. (Rev. 10-83) Previous Edition unusable Prescribed by GSA FAR (48 CFR) 53.243

Page of Pages AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code

2. AMENDMENT MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (if applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than item 6) CODE

(x) 9A. AMENDMENT OF SOLICITATION NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

8. NAME AND ADDRESS OF CONTRACTOR (NO., Street, Country, State and ZIP Code)

CODE FACILITY CODE

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning ______ copies of amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OR OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

Check One

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______ copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR 16B. UNITED STATES OF AMERICA

(Signature of person authorized to sign)

15C. DATE SIGNED

(Signature of Contracting Officer)

16C. DATE SIGNED

Continuation Page

PAGE 2 OF 2 GS-07P-13-HH-D-0012/0002

Continued from Block 14...

2. Extends the deadline for questions TO JUNE 17, 2013 AT 4:00 PM CST. Questions are to be submitted in writing to carolina.mcgillick@gsa.gov.

3. Provides questions and answers to questions received since the solicitation was issued.

4. Provides the Agenda and Minutes and sign in sheets to the meeting for the Pre-Proposal Conference that was held on May 2, 2013.

5. Provides an updated solicitation package to replace the one posted on 4/22/2013. Areas added and/or revised are highlighted. No changes were made to the GSA REGION 7 CONSTRUCTION LINE ITEMS 2013 (PRICING FORM) OK WEST or to the Hypothetical SOW.

6. Adds clarification to the instructions on how to submit the pricing form using Excel format.

Potential Offerors are to acknowledge this amendment on Block 19 of the Standard Form 1442 to be submitted with proposals.

SOLICITATION GS-07P-13-HH-D-0012, IDIQ GENERAL CONSTRUCTION, REPAIR AND

ALTERATION SERVICES FOR OKLAHOMA WEST.

QUESTIONS SUBMITTED VIA E-MAIL AS OF June 4, 2013:

1. Is “Similar” as used in reference to projects in Section II.D(2) Experience, (3) Past Performance, and (5) Qualifications and Experience of Key Personnel mean the same as defined in II.D(2)?

ANSWER: The definition given for “similar” project in Section II.D(2), in paragraph “Submittal Requirement” should be used in the same manner for (3) Past Performance and (5) Qualifications and Experience of Key Personnel.

2. How do you want Davis-Bacon wages priced in the response? Do you want 1 wage for each trade for the zone, or separate wages for the different Davis-Bacon regions in the zone?

ANSWER: The line item prices submitted under this solicitation shall be fully loaded prices, which should include labor, materials, overhead and profit. This zone includes multiple Davis- Bacon wage determinations; however, the map included in the solicitation contained historical spending in the state (darker green areas represent areas where most of the dollars were spent).

Use the map as an informational tool to figure out which wage determination would be the most appropriate to based your prices on.

3. May an offeror submit subcontractor past performance to satisfy the requirements of Experience & Past Performance? If so, is a teaming agreement necessary between the two firms and must this teaming agreement be included in the proposal?

ANSWER: Yes, an Offeror may submit subcontractor past performance to satisfy the requirements of Experience & Past Performance. However, the Offeror must submit a teaming agreement as required in Section II.C(1) Price Proposal & Other Requirements.

4. We respectfully request that GSA increase the requirement for a bona fide place of business from 50 miles to 200 miles from the GSA OK West Zone. We believe there are several qualified firms who could successfully perform work on this contract outside of the 50 mile radius.

ANSWER: Any interested small business concern may propose for this solicitation. The requirement of a local office within the zone (or within a 50-miles radius of the zone) is not a pass/fail requirement. It is, however, a non-price evaluation factor; to obtain a satisfactory or higher rating you are required to have a bona fide place of business in the zone. Moreover, there will be request for proposals for these similar requirements in the rest of the Region (Texas, Oklahoma, Arkansas, Louisiana and New Mexico) in the near future and we encourage you to propose for those zones if closer to your locality.

PRE-PROPOSAL CONFERENCE AGENDA & MINUTES

Multiple Award IDIQ Construction & Repair/Alterations For the Oklahoma West Zone

GSA, PBS, Greater Southwest Region

Solicitation GS-07P-13-HH-D-0012

May 2, 2013 - 1:00 p.m. Call in number: (866)564-9718, passcode: 1817722

Locations: Oklahoma City Federal Building 200 NW 4th St., Suite 4012 Oklahoma City, OK 73102

FG Lanham Federal Building 819 Taylor St., Room 12A1 Fort Worth, TX 76102

1. GREETING AND INTRODUCTIONS

Becky Clark – GSA Contracting Officer Zach Rich – GSA Supervisory Contracting Officer Thomas Robbins – GSA Supervisory Gen. Engineer, Project Management for Operations Branch Santos Castillo – GSA General Engineer Clint Griffith – GSA Project Manager Carolina McGillick – GSA Contract Specialist Isaac Karto – GSA Contract Specialist (on the phone) Linda Miles – GSA Purchasing Agent

PURPOSE OF CONFERENCE

Multiple Award IDIQ for General Construction and Repair/Alterations (Solicitation No. GS-07P- 13-HH-D-0012), for the Oklahoma West Zone.

The purpose of this conference is to clarify the solicitation, discuss any solicitation questions, proposal procedure questions, award process questions and/or any technical questions.

A. SPECIAL NOTE

No oral statement made by a Government representative during the pre-proposal conference, nor any written record of such oral statements as may be made and subsequently furnished to the offeror, will be deemed to have the effect of adding to, modifying or otherwise varying from the written provisions of the Request for Proposals (including, but not limited to specifications, drawings, and written amendments to the solicitation). In the event the discussion or questions raised during the pre-proposal conference indicated a need to modify the request for proposals, an amendment to the solicitation must be acknowledged in the same manner and under the same conditions as all other written amendments to a Request for Proposal.

B. SIGN IN SHEET

Sign in sheets for both locations are included in this amendment

C. MINUTES OF MEETING

Minutes are included in this amendment.

2. GSA CONTRACTING COMMENTS

This procurement is for General Construction, Repair and Alteration Services for the Western part of the state of Oklahoma (from now on referred to as Oklahoma West Zone). This Zone is 100% set aside for Small Business. For a complete listing of Counties in this Zone, please refer to the solicitation.

A. HSPD-12 REQUIREMENTS

Offerors awarded contracts resulting from this solicitation will be expected to obtain and retain security clearances as per Homeland Security Presidential Directive 12 (HSPD-

12) for all key personnel assigned to the contract, and for the duration of the contract.

B.OVERVIEW OF IDIQS

1) PERIOD OF PERFORMANCE

The resulting contracts will be for a period of one (1) year, with provisions to exercise options for four (4) one-year periods.

2) ESTIMATED AMOUNT PER YEAR & MOL:

The estimated total per year for this Zone is $1,500,000.

The yearly maximum ordering limitation (MOL) per contract was based on the historical spending. For this zone, the MOL is $1,500,000 per contract per year.

Minimum order. When the Government requires services covered by this contract in an amount less than $2,000.00, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those services under the contract.

Maximum order. The Contractor is not obligated to honor –

(1) Any order for a single item in excess of $500,000;

(2) Any order for a combination of items in excess of $500,000; or

(3) A series of orders from the same ordering office within five (5) days that together call for quantities exceeding the limitation in paragraph (1) or (2) of this section.

The Contractor shall honor any order exceeding the maximum order limitations in, unless that order (or orders) is returned to the ordering office within three (3) days after issuance, with written notice stating the Contractor’s intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the services from another source.

3) MINIMUM GUARANTEED:

The guaranteed minimum will be $2,000 for the base period only.

4) TASK ORDERS PLACEMENT UNDER MULTIPLE-AWARD CONTRACTS:

Task Orders below the Simplified Acquisition Threshold ($150,000) and that are at least 85% line item work may be issued to the contractor with the lowest priced line items.

Determination of the lowest priced line item contractor will be based on the aggregate total of the prices for the specific line items required on the TO. If the lowest priced line item contractor has reached its MOL for the year (or will exceed their MOL if awarded this TO); the TO will be issued to the next lowest priced line item contractor.

Task Orders for requirements at SAT or above, will be competed among all eligible IDIQ contractors for the zone. The ordering contracting officer shall issue a lump sum Request for Proposal (RFP) to all eligible IDIQ contractors for that zone, who have not reached their MOL (or will not exceed their MOL if awarded this TO) for the year. After receipt of proposals, and consideration of the factors stated in the RFP, the ordering contracting officer shall issue a TO to the responsible contractor whose proposal offers the best value to the government.

5) SPECIAL ORDERING FOR CARPET-ONLY TASK ORDERS:

Task Orders for installation of carpet only (above $2,500) will be competed among the eligible contractors of the zone as a lump sum RFP (regardless of dollar value).

Eligible contractors are those who have not reached or exceeded their MOL, or who the award of the subject TO would not force them to exceed their MOL.

TOs for carpet only will be subject to the wage determination for the county where work is to be performed under the Service Contract Act of 1965. The ordering Contracting Officer shall include the appropriate wage determination with the RFP.

6) LINE ITEM PRICING:

The labor rates on the Pricing Form are fully loaded rates. Davis Bacon Wage Determinations are to be used for the labor portion of the line items pricing.

Also note the factors to be applied to line item prices for work done during other than normal working hours at the bottom of the pricing form.

Please note the Special Instructions for Line Item Pricing Submittal (include spreadsheet on CD).

C. OVERVIEW OF TECHNICAL EVALUATION FACTORS

1) MANAGEMENT PLAN

2) EXPERIENCE

3) PAST PERFORMANCE

4) QUALITY & ACCURACY OF HYPOTHETICAL PROPOSAL

5) QUALIFICATIONS & EXPERIENCE OF KEY PERSONNEL

6) EVIDENCE OF LOCAL OFFICE

Each of these evaluation factors are explained in detailed in the solicitation.

D. BASIS FOR AWARD

Awards may be made without discussions Best value, source selection process

E. QUESTIONS/REQUEST FOR INFO.

Submit questions by e-mail to Carolina.mcgillick@gsa.gov NLT June 17, 2013.

Proposals are due: June 24, 2013 @ 2:00 PM CST

G. PROPOSAL SUBMISSION REQUIREMENTS

1) VOLUME I – PRICE PROPOSAL & OTHER REQUIREMENTS

One original and 3 copies, clearly marked Signed SF 1442, with amendments acknowledged, signed & dated GSA Region 7 Construction Line Items 2013 (Pricing Form), printed and on CD Pricing for the Hypothetical SOW using the Bid Summary Sheet.

Representations & Certifications (section V.D. of the solicitation) Signed executed Joint Venture or partnership agreement – if applicable

2) VOLUME II – TECHNICAL PROPOSAL

One original and 3 copies, clearly marked Separate from Volume I

3. TIPS FOR PREPARING A PROPOSAL

A. READ THE SOLICITATION AND AMENDMENTS. SUBMIT ANY QUESTIONS TO

THE CONTRACT SPECIALIST (CAROLINA MCGILLICK).

B. DOES YOUR PROPOSAL CONTAIN ALL THE ITEMS THE SOLICITATION IS

ASKING FOR? MAKE SURE YOUR PROPOSAL FULLY ADDRESSES THE

SUBMITTAL REQUIREMENTS FOR EACH EVALUATION FACTOR.

C. NEVER ASSUME WE KNOW ABOUT YOUR COMPANY AND YOUR

PERFORMANCE. WE CAN ONLY EVALUATE WHAT YOU PROVIDE.

4. HYPOTHETICAL STATEMENT OF WORK

A. THE HYPOTHETICAL PROPOSAL WILL BE USED FOR EVALUATION OF

PRICE REASONABLENESS AND AS A TECHNICAL EVALUTION FACTOR.

B. NO SITE VISITS WILL BE SCHEDULED.

5. FINAL GSA COMMENTS

6. QUESTIONS AND ANSWERS

QUESTION: Regarding the issue of Task Orders, does that mean we will be bidding against each other on this?

ANSWER: If a Task Order requirement is below $150,000, and consists of more than 85% line item work; the aggregate total for those particular line items will be compared among the eligible contractors in the zone and the contractor with the lowest aggregate total will get the award.

If the Task Order requirement is below $150,000 and consists of fewer than 85% line items, or is over $150,000; then a request for quotes will go to all eligible contractors in the zone for competition.

Also, the Task Order Contracting Officer (CO) reserves the right to compete any requirement regardless of dollar value if the CO determines that is in GSA’s best interest.

QUESTION: So, the line items are on the spreadsheet? You are not using R.S. Means?

ANSWER: Correct, this contract will not reference or “use” RS Means. GSA’s PM’s often times use it as a tool when we do our estimating.

QUESTION: What are the bond threshold requirements? Is a task order for say, $20,000 bondable?

ANSWER: There are no bonding requirements for the base contract. As per FAR Part 28.102, Performance and Payment Bonds and Alternative Payment Protections for Construction

Contracts, task orders for more than $150,000 will require performance bonds and a form of payment protection (usually a payment bond or an irrevocable letter of credit). For task orders between $30,000 and $150,000, one form of payment protection will be required (either a payment bond or an irrevocable letter of credit). So, a task order for $20,000 (for example) will not require a bond.

QUESTION: How many facilities are there in the West Zone?

ANSWER: In the West Zone of Oklahoma the majority of the work is done in the Oklahoma

City area (there are 2 courthouses and a Federal campus in Oklahoma City); there is some property in Lawton also.

QUESTION: Is there allowance for mobilization?

ANSWER: No, there is no allowance for mobilization, within the zone, when doing a line item

Task Order. We gave you a map showing where the majority of the work in this zone will take place (based on historical data) so this should help you in coming up with your pricing.

QUESTION: How many awards for this zone?

ANSWER: We “anticipate” awarding around 3 contracts for this zone, but we reserve the right to make fewer or additional awards.

QUESTION: Spreadsheet items 2-50. Should the prices include supervision, overhead and bondage? Is that correct?

ANSWER: Your line item prices are to be fully loaded prices including labor, supervision, materials, profit and overhead. You will be allowed a separate bonding charge, if required.

QUESTION: In Section 1 of the spreadsheet, how does that factor into the bid? How will these be used?

ANSWER: The man hours in this section will be used in the rare instances when the contractor is asked to install Government furnished items or materials.

QUESTION: For example, Item 50, it requires a price for lineal feet. This price is for material only, right?

ANSWER: No, your line item price should be fully loaded price that includes labor, supervision, material, profit and overhead.

QUESTION: On the wage determinations, are the labor rates subject to change within the 5 year contract?

ANSWER: Yes, the Davis Bacon rates can change. They are usually in a 2 year cycle.

QUESTION: How are you planning to handle the change when wages change during the course of the contract?

ANSWER: If a wage rate changes in the middle of the base or an option year the procedures in FAR 22.404-12(b) will be followed. When we exercise an option under this contract we will follow the procedures in FAR 22.404-12(c)(1) and clause 52.222-30 when it comes to your line item prices only (in competitive orders you will quote based on the applicable wage rates in your base contract at that time). Per FAR 22.404-12(c)(1), we will not adjust the line item prices as a result of the incorporation of a new or revised wage determination at the exercise of each option to extend the term of the contract.

QUESTION: What about task orders over $500,000?

ANSWER: These IDIQ contracts will not be used for orders over $500,000.

QUESTION: For orders over $150,000, will there be a Statement of Work? Will we do a walk through and provide a quote?

ANSWER: For task orders over $150,000, we will issue a Request for Quote (RFQ) to all contractors within the zone and include a statement of work. You will have the opportunity for a walk through (if necessary) and then provide a quote.

QUESTION: What is the average size of a task order?

ANSWER: Based in historical data, the average size of the task orders were $40,000 to

$50,000. We also found that more than 90% of the task orders were under $500,000.

QUESTION: On the 15% of the work that is non-line item work that is considered non-schedule, right?

ANSWER: Yes, for the 15% of the work that is not line item, the low line item contractor for that order will be requested to submit a quote for the non-line item work.

NSN 7540-01-152-8070 STANDARD FORM 30. (Rev. 10-83) Previous Edition unusable Prescribed by GSA FAR (48 CFR) 53.243

Page of Pages AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code

2. AMENDMENT MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (if applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than item 6) CODE

(x) 9A. AMENDMENT OF SOLICITATION NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

8. NAME AND ADDRESS OF CONTRACTOR (NO., Street, Country, State and ZIP Code)

CODE FACILITY CODE

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning ______ copies of amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OR OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

Check One

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______ copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR 16B. UNITED STATES OF AMERICA

(Signature of person authorized to sign)

15C. DATE SIGNED

(Signature of Contracting Officer)

16C. DATE SIGNED

ATTENTION OFFERORS

SPECIAL INSTRUCTIONS FOR LINE ITEM PRICING

SUBMITTAL

Use the attached spreadsheet titled: “GSA REGION 7

CONSTRUCTION LINE ITEMS 2013 (PRICING FORM) OK

EAST” for submitting your line item prices. Please submit hard copies of the spreadsheet with your pricing proposal (one original and 3 copies as specified on the solicitation); as well as a CD containing the file in “Excel Format” for the spreadsheet with your prices included (only one CD is to be included in your pricing proposal).

Line Item

Number

Div.Sec

DESCRIPTION Unit Base Year Option Year 1 Option Year 2 Option Year 3 Option Year 4

Oklahoma West Zone

1.00 DIV 1 - GENERAL CONDITIONS

1.01 Project Manager MH

1.02 Laborer MH

1.02 Carpenter MH

1.03 Painter MH

1.04 Paper Hanger MH

1.05 Plaster MH

1.06 Ceramic tile installer MH

1.07 Carpet Installer MH

1.10 Plumber/Pipe Fitter MH

1.10 A/C Mechanic MH

1.11 Electrician MH

2.00 DIV 2 - EXISTING CONDITIONS - DEMOLITION

2.01 Demo partition, complete, metal or wood stud and gypsum, or demountable partitions, includes one electrical or mechanical device and 10' conduit per 100 SF

SF

2.02 Demo partition, add to partition demo, expanded metal fastened to metal studs SF

2.03 Demo partition, Terracotta/Brick/Block, 4-12" thick, with or without plaster finish CF

2.04 Demo plaster, on wall or ceiling, includes wood or metal lath SF

2.05 Demo wall covering, vinyl or fabric, including cleaning of the wall surface SF

2.10 Demo door and frame, from drywall or demountable partition, single, includes hardware removal EA

2.11 Demo door, wood or metal, single EA

2.12 Demo frame, wood or metal, single or double EA

2.13 Demo door, add for hardware removal and storage, includes lockset, closures, hinges EA

2.14 Demo window, frame and glazing, to 25 SF EA

2.20 Demo flooring, carpet, bonded, releasable adhesive, broadloom or tile, includes surface scraping SF

2.21 Demo flooring, carpet, bonded, permanent adhesive, broadloom or tile, includes surface scraping SF

2.22 Demo flooring, carpet, tacked down, includes pad and tack strip per SOW SF

2.23 Demo flooring, add for double stick removal, includes surface scraping SF

2.24 Demo flooring, VCT, includes surface scraping and cleaning SF

2.25 Demo flooring, and re-install access floor panels for work below, standard 2' x 2' EA

2.26 Demo wall base, vinyl, rubber, or wood. LF

2.27 Demo door stop, floor or wall mounted EA

2.30 Demo casework, remove cabinets, complete, wall or base, includes doors, drawers, top LF

2.31 Demo countertops, any material LF

2.40 Demo ceiling, mineral fiber tiles, on suspension system SF

2.41 Demo ceiling, suspension system, includes hangers SF

2.50 Demo chair rail, any material LF

2.51 Demo or dismantling of bookcases, price shall be determined by the square feet face or front view of bookcase.

SF

3.00 DIV 3 - CONCRETE

3.01 Concrete core drilling, add per inch of depth over 6" slab EA

3.02 Concrete core drilling, core, reinforced concrete slab, 1" diameter, up to 6" thick slab, includes bit, layout and set up

EA

3.03 Concrete core drilling, core, reinforced concrete slab, up to 6" diameter, up to 6" thick slab, includes bit, layout and set up

EA

3.04 Repair sub-floor, masonry, where damaged from wall or object removal up to 1/4" thick SF

GSA REGION 7 CONSTRUCTION LINE ITEMS 2013 (PRICING FORM)

Div.Sec

DESCRIPTION Unit Base Year Option Year 1 Option Year 2 Option Year 3 Option Year 4

GSA REGION 7 CONSTRUCTION LINE ITEMS 2013 (PRICING FORM)

6.00 DIV 6 - WOOD, PLASTICS, AND COMPOSITES

6.20 Moldings, base, oak equivalent, nominal 3/4" x 3" LF

6.21 Moldings, base, oak equivalent, nominal 3/4" x 6" LF

6.22 Moldings, base, shoe, oak equivalent, 1/2" x 3/4" LF

6.23 Moldings, trim, chair rail, oak equivalent, 5/8" x 2-1/2" LF

6.24 Moldings, trim, crown, stock oak, 4-5/8" LF

6.25 Moldings, casings, stock profiles, oak equivalent, 3/4" x 2-3/4" LF

7.00 DIV 7 - THERMAL AND MOISTURE PROTECTION

7.01 Insulation, recycled blue cotton fiber, unfaced batts, R13 in walls SF

7.02 Insulation, sound attenuation blanket 3" thick, mineral wool fiber for ceiling SF

7.03 Insulation, sound attenuation blanket, 3-1/2" thick, fiberglass for ceiling SF

7.04 Insulation, sound attenuation system, mineral fiberboard panel, fabric covered, concealed spline, wall mounted

SF

8.00 DIV 8 - OPENINGS

8.01 Door assembly, wood doors and hollow metal frames, solid particle core, nominal 3'-0" x 7'-0" x 1-

3/4",oak equivalent factory finished, 16 gauge hollow metal frame, prime and two coats paint on frame. Includes hinges, door stop, door silencers, excludes lockset

EA

8.02 Door, wood, flush, solid particle core, 1-3/4" thick, nominal 3' x 7', oak equivalent, excludes lockset EA

8.03 Door, wood fire door, "B" label 1 hour, solid particle core, flush, 1-3/4" thick, nominal 3' x 7', oak equivalent, excludes lockset

EA

8.04 Door, wood fire door, "B" label 90 minute, solid wood core, flush, 1-3/4" thick, nominal 3' x 7', oak equivalent, excludes lockset

EA

8.05 Door, hollow metal core, 20 gauge, 1-3/4" thick, nominal 3' x 7', excludes lockset EA

8.06 Door, metal fire door, "B" label 90 minute, 20 gauge, 1-3/4" thick, nominal 3' x 7', excludes lockset EA

8.07 Door, metal fire door, "A" 3 hour, egress core, 18 gauge, 1-3/4" thick, nominal 3' x 7', excludes lockset

EA

8.08 Door, add for vision lite, into any door with safety glass tempered or fire rated wired, lite tinted or clear glass and wood or metal frame. Including cutting opening into the door, one coat primer or sealer paint and two finish coats of paint on frame.

EA

8.14 Door frame, standard hollow metal 16 gauge, single nominal 3' x 7', upto 5-3/4" jamb depth EA

8.15 Door frame, standard hollow metal 16 gauge, double nominal 6' x 7', upto 5-3/4" jamb depth EA

8.16 Door frame, add for welded frame EA

8.30 Access panel, latch-locking metal access panel, up to 22" x 22" in size EA

8.31 Louver in any door, wood or metal frame (24" x 24" max). Including cutting opening into the door, one coat primer or sealer paint and two finish coats of paint on frame.

SF

8.40 Door frame, aluminum, single door, clear or bronze per SOW EA

8.41 Door frame, aluminum, double door, 6 ft wide, clear or bronze per SOW EA

8.42 Door, aluminum entrance, narrow stile clear or bronze per SOW, includes hinges, push/pull, deadlock, cylinder, threshold, and 1/4" tempered glazing

EA

8.50 Window, in partition, safety glass, not to exceed 36 SF per unit, 16 gauge hollow metal frame, 3/8" glazing, cutting opening into standard partition, prime and two coats paint on frame. Does not include cutting opening

SF

8.70 Door hardware, lockset, commercial, mortise, keyed, single cylinder EA

8.71 Door hardware, lockset, standard duty, cylindrical lockset, non-keyed EA

8.72 Door hardware, lockset, keyless pushbutton, Trilogy T2 style or approved equal EA

8.73 Door hardware, lockset, deadbolt, cylindrical or double cylindrical EA

8.74 Door hardware, add for electronic door release, includes transformer, electric strike, and push button EA

Div.Sec

DESCRIPTION Unit Base Year Option Year 1 Option Year 2 Option Year 3 Option Year 4

GSA REGION 7 CONSTRUCTION LINE ITEMS 2013 (PRICING FORM)

8.75 Door hardware, panic device, for rim device, outside key and pull EA

8.76 Door hardware, panic device, bar and vertical rod, outside key and pull

8.77 Door hardware, door closer onto any door, LCN model #4041 style or approved equal. EA

8.78 Door hardware, door closer with hold open, Norton model #1605 style or approved equal. EA

8.79 Door hardware, door stop or bumper, floor or wall mounted. EA

8.80 Door hardware, lockset, commercial, mortise, re-core cylinder EA

8.81 Door hardware, hinges, full mortise, average frequency, steel base, US26D or US10A, 4-1/2" x 4-

1/2"

PR

8.90 Trim door bottom, metal or wood door, up to 40" wide. Includes remove and reinstall. EA

9.00 DIV 9 - FINISHES

9.20 Partition, 3-5/8" 25 ga metal stud, 16" O.C., 5/8" type X gypsum on both sides, including tape and finish (level 4), primer and two finish coats paint

SF

9.21 Partition, add for additional lay of 5/8" gypsum wall board, no finish SF

9.22 Partition, storefront system, aluminum frame, commercial grade, 3/8" clear plate glass, 3' x 7' door with standard hardware

SF

9.23 Partition, 7/8" metal furring channel or 1-5/8" metal stud, 24" o.c., 5/8" gypsum one side, including tape and finish (level 4), primer, two finish coats of paint, and install 4" base.

SF

9.24 Partition, add for texture SF

9.25 Partition, add for 3/4" thick fire retardant plywood required for equipment - no finish SF

9.26 Partition, add for 9 gauge expanded metal, mechanically fastened, includes cutouts. SF

9.27 Partition, skim coat on existing wall or ceiling surface (drywall, CMU, etc.). SF

9.50 Ceiling, suspended ceiling tile, in existing suspended grid system, 5/8" lay-in mineral fiber SF

9.51 Ceiling, suspended ceiling tile, in existing suspended grid system, 3/4" lay-in mineral fiber SF

9.52 Ceiling, add for regular tiles

9.53 Ceiling, class A suspension systems, 15/16" T bar, standard grid sizes SF

9.54 Ceiling, class A suspension systems, add for 9/16" grid SF

9.55 Ceiling, gypsum, 3-5/8" 20 ga metal stud, 16" O.C., 5/8" type X gypsum, including tape and finish

(level 4), primer and two finish coats paint

SF

9.60 Flooring, carpet tile, cushion back, tufted, to 20 oz. SY

9.61 Flooring, carpet tile, cushion back, tufted, to 26 oz. SY

9.62 Flooring, carpet tile, hard back, tufted, 26 oz. SY

9.63 Flooring, sheet carpet, medium traffic, plush, 30 oz. SY

9.64 Flooring, sheet carpet, medium traffic, plush, 36 oz. SY

9.65 Flooring, sheet carpet, medium traffic, plush, 42 oz. SY

9.66 Flooring, carpet, add for commercial grade pad, sponge rubber, felt, or bonded urethane. SY

9.67 Flooring, carpet, add for carpet binder bar beveled vinyl or beveled metal per LF

9.68 Flooring, patch carpet from partition removal (up to 6" wide). Government furnish carpet LF

9.69 Flooring, floor leveling, feathered to 1/2" thick, polymer-modified blend SF

9.70 Flooring, add for moving furniture and equipment, standard office furniture, not systems furniture SY

9.71 Flooring, add to raise and lower system furniture for removal and the installation of carpet. Cost is based per square yard covered by system furniture partition.

SY

9.75 Wall coverings, vinyl fabric backed, lightweight type 1, 12-15 oz per SY, including wall preparation, sizing, primer, sanding, etc.

SF

9.76 Wall coverings, vinyl fabric backed, mediumweight type 2, 20-24 oz per SY, including wall preparation, sizing, primer, sanding, etc.

SF

9.77 Wall coverings, vinyl fabric backed, heavyweight type 2, 28 oz per SY, including wall preparation, sizing, primer, sanding, etc.

SF

9.80 Base, cove or straight, rubber, 1/8" thick, 4" high, rubber, standard colors LF

9.81 Base, cove or straight, rubber, 1/8" thick, 6" high, rubber, standard colors LF

Div.Sec

DESCRIPTION Unit Base Year Option Year 1 Option Year 2 Option Year 3 Option Year 4

GSA REGION 7 CONSTRUCTION LINE ITEMS 2013 (PRICING FORM)

9.81 Flooring, resilient, vinyl composition tile, 1/8" thick, solid, tile or plank, includes glue SF

9.82 Flooring, resilient, vinyl composition tile, 1/8" thick, solid, 12" x 12" tile, conductive, includes glue SF

9.83 Flooring, resilient, rubber tile, 1/8" thick SF

9.90 Paint, walls complete, Includes surface preparation, primer, and two finish coats with roller SF

9.91 Paint, existing walls and ceilings, concrete, drywall or plaster, latex, primer, or seal coat, one coat with roller

SF

9.92 Paint, existing walls and ceilings, concrete, drywall or plaster, latex, two coats with roller SF

9.94 Paint, door and frame complete, paint jamb 2 coats enamel, paint door 2 coats latex, or polyurethane finish 2 coats. Finish per SOW

EA

9.95 Paint, door or frame, 3 ft x 7 ft nominal size, 1 side, 2 coats EA

9.96 Paint, door or frame, 3 ft x 7 ft nominal size, 2 sides, 2coats EA

9.97 Paint, base, wood, vinyl or metal. Up to 6" high, enamel, primer and 1 coat. LF

9.99 Paint, handrails (per rail), wood or metal, brushwork, Including wire brushing and/or sanding. LF

12.00 DIV 12 FURNISHINGS

12.30 Casework, manufactured, non-custom base cabinets, maximum, hardwood, pre-finished, door and drawers ordered per manufacturer options, min quantity two

LF

12.31 Casework, manufactured, non-custom wall cabinets, maximum, hardwood, pre-finished, door and drawers ordered per manufacturer options, min quantity two

LF

12.32 Casework, manufactured, non-custom base cabinets, minimum, stock, plastic laminate over particle board, door and drawers ordered per manufacturer options, min quantity two

LF

12.33 Casework, manufactured, non-custom wall cabinets, minimum, stock, plastic laminate over particle board, door and drawers ordered per manufacturer options, min quantity two

LF

12.34 Casework, counter-top, 25" deep with back and side splash, plastic laminate LF

12.35 Casework, counter-top, 25" deep with back and side splash, natural stone or quartz color group C LF

12.36 Casework, counter-top, 25" deep with back and side splash, solid surface LF

12.37 Casework, counter-top, add for cutout EA

21.00 DIV 21- FIRE SUPPRESSION (DIV 15)

21.01 Demo sprinkler head and all associated piping to the branch line and cap. Coordinate system shut-down with GSA and building maintenance.

EA

21.02 Demo sprinkler piping, up to 2" including all hangers, connectors, couplings, insulation. LF

21.03 Relocate existing sprinkler head, include up to 10 LF of new pipe, including all necessary piping required for relocation. Includes replacement of ceiling tile if necessary.

EA

21.10 Install new sprinkler head, concealed or standard spray , including fittings and escutcheons and up to

10 LF of new pipe.

EA

21.11 Drain and fill sprinkler system EA

21.20 Detection systems, horn and strobe EA

22.00 DIV 22 - PLUMBING (DIV 15)

22.01 Demo fixture, sink, including 10' piping EA

22.02 Demo fixture, urinal, wall mounted, including 10' piping EA

22.03 Demo fixture, water closet, wall or floor mounted, including 10' piping EA

22.04 Demo fixture, add for carrier supports removal EA

22.05 Demo piping, metal, up thru 1-1/2" diameter LF

22.06 Demo piping, metal, 2" - 3-1/2" diameter LF

22.07 Demo piping, metal, 4" - 6" diameter LF

22.08 Demo tank, water heaters, and liquid containers, to 45 gallon EA

22.09 Demo valves, metal valves, strainers and similar, up to 1-1/2" EA

22.10 Demo valves, metal valves, strainers and similar, 2" - 3" EA

22.15 Cleanouts, floor or wall type, 3" - 4" EA

Div.Sec

DESCRIPTION Unit Base Year Option Year 1 Option Year 2 Option Year 3 Option Year 4

GSA REGION 7 CONSTRUCTION LINE ITEMS 2013 (PRICING FORM)

22.16 Piping, copper, type K, L, M, DWV, includes couplings, hangers, and soldering, one fitting per 20', 1/2"

LF

22.17 Piping, copper, type K, L, M, DWV, includes couplings, hangers, and soldering, one fitting per 20', 1" LF

22.18 Piping, copper, type K, L, M, DWV, includes couplings, hangers, and soldering, one fitting per 20', 1-

1/2"

LF

22.19 Piping, copper, type K, L, M, DWV, includes couplings, hangers, and soldering, one fitting per 20', 2" LF

22.20 Piping, cast iron, waste line up to 4"; including all necessary hangers, supports, anchors, fittings, etc. LF

22.21 Piping, steel, schedule 40 or 80, includes couplings, hangers, and one fitting per 20', 2" LF

22.22 Pipe, fittings, solder joints, copper x copper, elbows, tees, concentric reducers, to 1/2" EA

22.23 Piping, steel, schedule 40 or 80, includes couplings, hangers, and one fitting per 20', 3" LF

22.24 Pipe, fittings, solder joints, copper x copper, elbows, tees, concentric reducers, to 1/2" - 1" EA

22.25 Pipe, fittings, solder joints, copper x copper, elbows, tees, concentric reducers, to 1" - 2" EA

22.26 Pipe, insulation, 1/2" wall, closed cell foam rubber, up to 1" LF

22.27 Pipe, insulation, 1" wall, fiberglass with all service jacket, or foam, 1-1/2" - 2" LF

22.30 Electric water heater, instantaneous, 2.5 gal single element EA

22.41 Fixtures, urinal, wall hung, vitreous china, with hanger, 0.5 GPF EA

22.42 Fixtures, water closet, wall hung, vitreous china, 1.6 GPF unless otherwise specified EA

22.43 Fixtures, water closet, add for wall mounted rough in for carrier if req, supply, waste, vent, per fixture EA

22.44 Fixtures, water closet, floor mounted, vitreous china, 1.28 GPF unless otherwise specified, ADA EA

22.45 Fixtures, water closet, add for floor mounted rough in for supply, waste, vent, per fixture EA

22.46 Fixtures, sink, lavatory, wall mounted, vitreous china, no faucet EA

22.47 Fixtures, sink, kitchen style, stainless steel, single bowl EA

22.48 Fixtures, sink, kitchen style, stainless steel, double bowl EA

22.49 Fixtures, sink, bathroom style, stainless steel or porcelain enamel, single bowl EA

22.50 Fixtures, sink, add for sink rough in for supply, waste, vent, carrier if req, per fixture EA

22.51 Fixtures, faucet, bath, diverter spout combination EA

22.52 Fixtures, faucet, kitchen, single control lever with pull out spray EA

23.00 DIV 23 - HEATING VENTILATION AIR CONDITIONING (DIV 15)

23.01 Demo HVAC diffuser, registers, or grills, up to 24" EA

23.02 Demo flexible duct, prefabricated LF

23.03 Relocate existing thermostat electric or pneumatic, including all necessary wiring and piping. EA

23.04 Relocate existing diffuser, register, or grill, existing flexible duct EA

23.30 Diffuser, ceiling, T bar mounting, 24" x 24" lay-in frame, 8" - 12" diameter neck, spin-in collar, nylon ties, and connection into existing air supply duct.

EA

23.31 Diffuser, add for opposed blade damper or butterfly damper per SOW EA

23.32 Grill, ceiling, T bar mounting, 24" x 24" lay-in frame, plenum air return grille, eggcrate 1/2" x 1/2" x

1/2"

EA

23.41 Flexible duct, insulated 1" thick, 8" diameter LF

23.42 Flexible duct, insulated 1" thick, 10" diameter LF

23.42 Flexible duct, add for duct extension, existing damper and diffuser, collar adapter, up to 10' EA

26.00 DIV 26 ELECTRICAL (DIV 16)

26.01 Electrical demolition, remove electrical wall device, complete, switch, duplex, quadraplex, 120v, provide cover when needed, demo to nearest junction box

EA

26.02 Electrical demolition, electrical floor receptacle, tombstone, flush, or pedestal and provide cap and plug assemble. Provide cover when needed, demo to nearest junction box.

EA

Div.Sec

DESCRIPTION Unit Base Year Option Year 1 Option Year 2 Option Year 3 Option Year 4

GSA REGION 7 CONSTRUCTION LINE ITEMS 2013 (PRICING FORM)

26.03 Electrical demolition, conduit, EMT, to 15' high, 1/2" to 1", includes fitting and hangers LF

26.04 Electrical demolition, wire removed from in place conduit, to 15' high, #12 CLF

26.05 Electrical demolition, wire removed from in place conduit, to 15' high, #10 CLF

26.06 Electrical demolition, junction boxes 4" x 8" EA

26.07 Electrical demolition, device boxes to 4" square or octagon EA

26.08 Electrical demolition, interior fluorescent fixtures 4' long, including supports & whips, to 15' high EA

26.09 Electrical demolition, exit light EA

26.10 Electrical demolition, lamps, fluorescent EA

26.11 Electrical demolition, power pole any type and replace ceiling tile, demo to nearest junction box EA

26.12 Electrical demolition, emergency battery pack light unit EA

26.13 Electrical demolition, telephone, data, comm outlet and provide cover when needed EA

26.15 Electrical demolition, armored cable, #12, 3 wire LF

26.16 Electrical demolition, wire mold, 500, 700, 1500, 3000 or 4000, conduit up to 1-1/2", including conductors fittings and hangers, demo to nearest junction box.

LF

26.20 Conductors, branch line assembly, 3/4" EMT, #10 3 wire solid, includes couplings and hangers LF

26.21 Conductors, single wire, THWN or THHN, solid, #12 CLF

26.22 Conductors, single wire, THWN or THHN, solid, #10 CLF

26.23 Armored MC Cable, #12, 3 conductor, solid CLF

26.24 Armored MC Cable, #12, 4 conductor, solid CLF

26.25 Armored MC Cable, #10, 3 conductor, solid CLF

26.26 Armored MC Cable, #10, 4 conductor, solid CLF

26.27 Unshielded twisted pair (UTP) cable, solid, PVC jacket, #24 4 pair, Cat 5e unless otherwise specified CLF

26.28 Unshielded twisted pair (UTP) cable, solid, plenum, #24 4 pair, Cat 5e unless otherwise specified CLF

26.30 Conduit, EMT, 1/2", no wire, to 15' high with hangers, incl hanger, couplings, bends LF

26.31 Conduit, EMT, 3/4", no wire, to 15' high with hangers, incl hanger, couplings, bends LF

26.32 Conduit, EMT, 1", no wire, to 15' high with hangers, incl hanger, couplings, bends LF

26.33 Conduit, EMT, 1-1/2", no wire, to 15' high with hangers, incl hanger, couplings, bends LF

26.34 Conduit, EMT, 2", no wire, to 15' high with hangers, incl hanger, couplings, bends LF

26.35 Conduit, sealtite, 3/4" LF

26.36 Device box, 4" square EA

26.37 Device plaster ring, 4" square EA

26.40 Receptacle, complete assembly, includes 1/2" conduit (10'), 4" square device boxes (2), plaster ring

4" square, #12 wire (3), receptacle duplex 120V grounded, 15A

EA

26.41 Receptacle, complete assembly in existing wall, includes MC Cable #12 (3) wire (15'), 2" square device box, plaster ring 2" square, receptacle duplex 120V grounded, 15A

EA

26.42 Receptacle, duplex, 120V, grounded, 15A EA

26.43 Receptacle, duplex, 120V, grounded, 20A EA

26.44 Receptacle, duplex, 120V, grounded, ground fault interrupting (GFI) 20A EA

26.45 Receptacle, duplex, 120V, isolated ground, 20A EA

26.46 Receptacle, duplex, 125V or 250V, corrosion resistant, NEMA L5 or L6 twistloc EA

26.47 Unshielded twisted pair (UTP) jack, RJ-45, #24, 4 pair, up to Category 6 EA

26.50 Switch, quiet type, single pole, 20A EA

26.51 Switch, quiet type, 3-way, 20A EA

26.52 Switch, single pole, dimmer, fluorescent up to 1000w, 20A EA

26.53 Switch, single pole, lock handle, 20A EA

26.54 Wall plates, stainless, metal, or wood, 1 gang EA

Div.Sec

DESCRIPTION Unit Base Year Option Year 1 Option Year 2 Option Year 3 Option Year 4

GSA REGION 7 CONSTRUCTION LINE ITEMS 2013 (PRICING FORM)

26.55 Wall plates, stainless, metal, or wood, 2 gang EA

26.56 Wall plates, stainless, metal, or wood, 3 gang EA

26.57 Wall plates, stainless, metal, or wood, 4 gang EA

26.58 Wall plates, plastic, 1 gang EA

26.59 Wall plates, plastic, 2 gang EA

26.60 Wall plates, plastic, 3 gang EA

26.61 Wall plates, plastic, 4 gang EA

26.70 Lighting fixtures, grid mount, fluorescent, with lamps and acrylic lens, 1' x 4' two 32w T8 unless specified

EA

26.71 Lighting fixtures, grid mount, fluorescent, with lamps and acrylic lens, 2' x 2' two U 32w T8 unless specified

EA

26.72 Lighting fixtures, grid mount, fluorescent, with lamps and acrylic lens, 2' x 4' two 32w T8 unless specified

EA

26.73 Lighting fixtures, grid mount, fluorescent, with lamps and acrylic lens, 2' x 4' three 32w T8 unless specified

EA

26.74 Lighting fixtures, grid mount, fluorescent, with lamps and acrylic lens, 2' x 4' four 32w T8 unless specified

EA

26.75 Lighting fixtures, add for air handling troffer EA

26.76 Lighting fixtures, add for parabolic lens in new fixture EA

26.77 Lighting fixtures, add for dimmable electronic ballast, up to 40w fluorescent, to 15' high EA

26.78 Lighting fixtures, down light , fluorescent, with lamps and acrylic lens, 4 pin tubes EA

26.79 Lighting fixtures, down light , add for wall wash trim EA

26.80 Lighting fixtures, replace acrylic lens with parabolic lens in existing fixture EA

26.81 Lighting fixtures, electronic ballast replacement, up to 40w fluorescent, to 15' high EA

26.82 Lighting fixtures, electronic ballast replacement, dimmable up to 40w fluorescent, to 15' high EA

26.83 Lighting fixtures, emergency lights, self contained fluorescent lamp pack EA

26.84 Lighting fixtures, exit lights, LED standard, single face EA

26.85 Lighting fixtures, exit lights, LED standard, double face EA

26.90 Circuit breaker, 120v, 1 pole, 15 to 50 amp EA

26.91 Circuit breaker, 240v, 2 pole, 15 to 50 amp EA

26.95 Disconnect electrical power service from system furniture, price per circuit removed to nearest junction box

EA

50.00 DIV 50 - INSTALL GOVERNMENT FURNISHED MATERIAL

50.01 Partition, demountable type, gypsum or metal LF

50.02 Door Frame, hollow metal or aluminum, excludes cutting opening EA

50.03 Door, wood or metal, in existing frame EA

50.04 Door hardware, lockset, cylindrical, in existing door, excludes door preparation EA

50.05 Door hardware, lockset, full mortise, in existing door, excludes door preparation EA

50.06 Door hardware, panic device, in existing door, excludes door preparation EA

50.07 Ceiling, acoustical tiles, in existing suspension system SF

50.08 Flooring, carpet, sheet goods, direct glue or stretched, contractor to supply all necessary items including adhesive, tack strip, any preparation of the floor surface

SY

50.09 Flooring, carpet, tile, contractor to supply all necessary items including adhesive, tack strip, any preparation of the floor surface

SY

50.10 Flooring, resilient VCT, tile or plank, contractor to supply all necessary items including adhesive and preparation of the floor surface.

SF

50.11 Light fixture, fluorescent, lay in, any size, existing grid system, includes armored cable and connection to 15'

EA

50.12 Factor in percentage (+/- %) to be applied to Line Items for Other Than Normal Working Hours

(OTNWH)

Indefinite Delivery Indefinite Quantity (IDIQ) General Construction, Repair and Alteration Contract for Oklahoma (West Zone) The Solicitation

Notice to Offerors of Total Small Business Set-Aside.

The General Services Administration (GSA) is setting aside the contract under the following clause found in the Agreement:

52.219-6, Notice of Total Small Business Set Aside (NOV 11)

Notice of Commercial Package Carriers

Because of increased security standards, commercial package carriers may experience delays in making deliveries to the address designated for receipt of offers. Offerors should take these facts into consideration when determining how and when to transmit offers to the office designated for receipt.

Table of Contents

I. General Information A. The Solicitation and Contract B. List of Solicitation Documents C. Authorized Representatives D. Pre-Proposal Conference E. Estimated Price Range F. FAR 52.228-1 Bid Guarantee (SEP 96) G. FAR 52.236-27 Site Visit – Construction (FEB 95) H. Receipt of Offers

II. Proposals A.