AMD01 OH AE IDIQ.pdf

1. CONTRACT ID CODE PAGE OF PAGES

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1 24

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE NO. 5. PROJECT NO. (If applicable)

1 07/28/2010

6. ISSUED 7. ADMINISTERED BY (If other than Item 6)

General Services Administration Property Management Service Center Ohio Procurement Team 230 South Dearborn, Suite 3800 Chicago, IL 60604

General Services Administration Property Management Service Center Ohio Procurement Team 230 South Dearborn, Suite 3800 Chicago, IL 60604

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) () 9A. AMENDMENT OF SOLICITATION NO.

GS05P10SLD0065

9B. DATED (SEE ITEM II)

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing Items 8 and 15, and returning ___ copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (if required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

() A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINSTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _ copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

GS05P10SLD0065

A/E IDIQ

ENTIRE STATE OF OHIO

Amendment 1 changes solicitation GS05P10SLD0065 as follows:

Except as provided herein, all terms and conditions of the document reference in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

(Signature of person authorized to sign)

BY ________________________________________________________

(Signature of Contracting Officer)

5PMC COMPUTER GENERATED FORM (03-99) STANDARD FORM 30 (10-83)

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT Page

CONTINUATION OF STANDARD FORM 30 2 2

1. This procurement is modified from a total small business set aside to a partial small business set aside please reference www.fbo.gov for modification.

2. This amendment also incorporates the most current SF330 for the subject solicitation GS05P10SLD0065.

Also attached is the small business outreach meeting agenda, attendance sheet, and captured questions and answers.

This solicitation will still close on AUGUST 23, 2010 AT 3:00 PM CENTRAL TIME.

ATTENTION: THE GOVERNMENT WILL STOP RECEIVING ANY QUESTIONS REGARDING THIS SOLICITATION

ON AUGUST 16, 2010 AT 3:00 PM CENTRAL TIME.

ARCHITECT-ENGINEER QUALIFICATIONS

Public reporting burden for this collection of information is estimated to average a total of 29 hours per response (25 hours for Part 1 and 4 hours for Part 2), including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the FAR Secretariat (MVA), Regulatory and Federal Assistance Publications Division, GSA, Washington, DC 20405.

OMB No.: 9000-0157 Expires: 5/31/2011

STANDARD FORM 330 (6/2004) PAGE 1 OF INSTRUCTIONS

Prescribed by GSA - FAR (48 CFR) 53.236-2(b)

PURPOSE

Federal agencies use this form to obtain information from architect-engineer (A-E) firms about their professional qualifications. Federal agencies select firms for A-E contracts on the basis of professional qualifications as required by the Brooks A-E Act (40 U.S.C. 1101 - 1104) and Part 36 of the Federal Acquisition Regulation (FAR).

The Brooks A-E Act requires the public announcement of requirements for A-E services (with some exceptions provided by other statutes), and the selection of at least three of the most highly qualified firms based on demonstrated competence and professional qualifications according to specific criteria published in the announcement. The Act then requires the negotiation of a contract at a fair and reasonable price starting first with the most highly qualified firm.

The information used to evaluate firms is from this form and other sources, including performance evaluations, any additional data requested by the agency, and interviews with the most highly qualified firms and their references.

GENERAL INSTRUCTIONS

Part I presents the qualifications for a specific contract.

Part II presents the general qualifications of a firm or a specific branch office of a firm. Part II has two uses:

1. An A-E firm may submit Part II to the appropriate central, regional or local office of each Federal agency to be kept on file.

A public announcement is not required for certain contracts, and agencies may use Part II as a basis for selecting at least three of the most highly qualified firms for discussions prior to requesting submission of Part I. Firms are encouraged to update Part II on file with agency offices, as appropriate, according to FAR Part

36. If a firm has branch offices, submit a separate Part II for each branch office seeking work.

2. Prepare a separate Part II for each firm that will be part of the team proposed for a specific contract and submitted with Part I. If a firm has branch offices, submit a separate Part II for each branch office that has a key role on the team.

INDIVIDUAL AGENCY INSTRUCTIONS

Individual agencies may supplement these instructions. For example, they may limit the number of projects or number of pages submitted in Part I in response to a public announcement for a particular project. Carefully comply with any agency instructions when preparing and submitting this form. Be as concise as possible and provide only the information requested by the agency.

DEFINITIONS

Architect-Engineer Services: Defined in FAR 2.101.

Branch Office: A geographically distinct place of business or subsidiary office of a firm that has a key role on the team.

Discipline: Primary technical capabilities of key personnel, as evidenced by academic degree, professional registration, certification, and/or extensive experience.

Firm: Defined in FAR 36.102.

Key Personnel: Individuals who will have major contract responsibilities and/or provide unusual or unique expertise.

SPECIFIC INSTRUCTIONS

Part I - Contract-Specific Qualifications

Section A. Contract Information.

1. Title and Location. Enter the title and location of the contract for which this form is being submitted, exactly as shown in the public announcement or agency request.

2. Public Notice Date. Enter the posted date of the agency's notice on the Federal Business Opportunity website (FedBizOpps), other form of public announcement or agency request for this contract.

3. Solicitation or Project Number. Enter the agency's solicitation number and/or project number, if applicable, exactly as shown in the public announcement or agency request for this contract.

Section B. Architect-Engineer Point of Contact.

4-8. Name, Title, Name of Firm, Telephone Number, Fax

(Facsimile) Number and E-mail (Electronic Mail) Address.

Provide information for a representative of the prime contractor or joint venture that the agency can contact for additional information.

AUTHORIZED FOR LOCAL REPRODUCTION

Section C. Proposed Team.

9-11. Firm Name, Address, and Role in This Contract.

Provide the contractual relationship, name, full mailing address, and a brief description of the role of each firm that will be involved in performance of this contract. List the prime contractor or joint venture partners first. If a firm has branch offices, indicate each individual branch office that will have a key role on the team. The named subcontractors and outside associates or consultants must be used, and any change must be approved by the contracting officer. (See FAR Part 52 Clause "Subcontractors and Outside Associates and Consultants (Architect-Engineer Services)".) Attach an additional sheet in the same format as Section C if needed.

Section D. Organizational Chart of Proposed Team.

As an attachment after Section C, present an organizational chart of the proposed team showing the names and roles of all key personnel listed in Section E and the firm they are associated with as listed in Section C.

Section E. Resumes of Key Personnel Proposed for This

Contract.

Complete this section for each key person who will participate in this contract. Group by firm, with personnel of the prime contractor or joint venture partner firms first. The following blocks must be completed for each resume:

12. Name. Self-explanatory.

13. Role in This Contract. Self-explanatory.

14. Years Experience. Total years of relevant experience

(block 14a), and years of relevant experience with current firm, but not necessarily the same branch office (block 14b).

15. Firm Name and Location. Name, city and state of the firm where the person currently works, which must correspond with one of the firms (or branch office of a firm, if appropriate) listed in Section C.

16. Education. Provide information on the highest relevant academic degree(s) received. Indicate the area(s) of specialization for each degree.

17. Current Professional Registration. Provide information on current relevant professional registration(s) in a State or possession of the United States, Puerto Rico, or the District of Columbia according to FAR Part 36.

18. Other Professional Qualifications. Provide information on any other professional qualifications relating to this contract, such as education, professional registration, publications, organizational memberships, certifications, training, awards, and foreign language capabilities.

19. Relevant Projects. Provide information on up to five projects in which the person had a significant role that demonstrates the person's capability relevant to her/his proposed role in this contract. These projects do not necessarily have to be any of the projects presented in Section F for the project team if the person was not involved in any of those projects or the person worked on other projects that were more relevant than the team projects in Section F. Use the check box provided to indicate if the project was performed with any office of the current firm. If any of the professional services or construction projects are not complete, leave Year Completed blank and indicate the status in Brief Description and Specific Role (block (3)).

Section F. Example Projects Which Best Illustrate Proposed

Team's Qualifications for This Contract.

Select projects where multiple team members worked together, if possible, that demonstrate the team's capability to perform work similar to that required for this contract. Complete one Section F for each project. Present ten projects, unless otherwise specified by the agency. Complete the following blocks for each project:

20. Example Project Key Number. Start with "1" for the first project and number consecutively.

21. Title and Location. Title and location of project or contract. For an indefinite delivery contract, the location is the geographic scope of the contract.

22. Year Completed. Enter the year completed of the professional services (such as planning, engineering study, design, or surveying), and/or the year completed of construction, if applicable. If any of the professional services or the construction projects are not complete, leave Year Completed blank and indicate the status in Brief Description of Project and Relevance to This Contract (block 24).

23a. Project Owner. Project owner or user, such as a government agency or installation, an institution, a corporation or private individual.

23b. Point of Contact Name. Provide name of a person associated with the project owner or the organization which contracted for the professional services, who is very familiar with the project and the firm's (or firms') performance.

23c. Point of Contact Telephone Number Self-explanatory.

24. Brief Description of Project and Relevance to This

Contract. Indicate scope, size, cost, principal elements and special features of the project. Discuss the relevance of the example project to this contract. Enter any other information requested by the agency for each example project.

STANDARD FORM 330 (6/2004) PAGE 2 OF INSTRUCTIONS

Jane A. Smith

Joseph B. Williams

Tara C. Donovan

Chief Architect

Chief Mech. Engineer

Chief Elec. Engineer

29. EXAMPLE PROJECTS KEY

25. Firms from Section C Involved with This Project.

Indicate which firms (or branch offices, if appropriate) on the project team were involved in the example project, and their roles. List in the same order as Section C.

Section G. Key Personnel Participation in Example Projects.

This matrix is intended to graphically depict which key personnel identified in Section E worked on the example projects listed in Section F. Complete the following blocks (see example below).

26. and 27. Names of Key Personnel and Role in This

Contract. List the names of the key personnel and their proposed roles in this contract in the same order as they appear in Section E.

28. Example Projects Listed in Section F. In the column under each project key number (see block 29) and for each key person, place an "X" under the project key number for participation in the same or similar role.

29. Example Projects Key. List the key numbers and titles of the example projects in the same order as they appear in Section F.

Section H. Additional Information.

30. Use this section to provide additional information specifically requested by the agency or to address selection criteria that are not covered by the information provided in Sections A-G.

Section I. Authorized Representative.

31. and 32. Signature of Authorized Representative and

Date. An authorized representative of a joint venture or the prime contractor must sign and date the completed form. Signing attests that the information provided is current and factual, and that all firms on the proposed team agree to work on the project. Joint ventures selected for negotiations must make available a statement of participation by a principal of each member of the joint venture.

33. Name and Title. Self-explanatory.

STANDARD FORM 330 (6/2004) PAGE 3 OF INSTRUCTIONS

SAMPLE ENTRIES FOR SECTION G (MATRIX)

26. NAMES OF KEY

PERSONNEL

(From Section E, Block 12)

27. ROLE IN THIS

CONTRACT

(From Section E, Block 13)

28. EXAMPLE PROJECTS LISTED IN SECTION F

(Fill in "Example Projects Key" section below first, before completing table. Place "X" under project key number for participation in same or similar role.)

1 2 3 4 5 6 7 8 9 10

X X

X X

X

X X

XX

NO. TITLE OF EXAMPLE PROJECT (FROM SECTION F) NO. TITLE OF EXAMPLE PROJECT (FROM SECTION F)

XYZ Corporation Headquarters, Boston, MA

Founder's Museum, Newport RI

Federal Courthouse, Denver, CO

Justin J. Wilson Federal Building, Baton Rouge, LA

Part II - General Qualifications

See the " General Instructions " on page 1 for firms with branch offices. Prepare Part II for the specific branch office seeking work if the firm has branch offices.

1. Solicitation Number. If Part II is submitted for a specific contract, insert the agency's solicitation number and/or project number, if applicable, exactly as shown in the public announcement or agency request.

2a-2e. Firm (or Branch Office) Name and Address. Self-explanatory.

3. Year Established. Enter the year the firm (or branch office, if appropriate) was established under the current name.

4. DUNS Number. Insert the Data Universal Numbering

System number issued by Dun and Bradstreet Information Services. Firms must have a DUNS number. See FAR Part 4.6.

5. Ownership.

a. Type. Enter the type of ownership or legal structure of the firm (sole proprietor, partnership, corporation, joint venture, etc.).

b. Small Business Status. Refer to the North American

Industry Classification System (NAICS) code in the public announcement, and indicate if the firm is a small business according to the current size standard for that NAICS code (for example, Engineering Services (part of NAICS 541330), Architectural Services (NAICS 541310), Surveying and Mapping Services (NAICS 541370)). The small business categories and the internet website for the NAICS codes appear in FAR Part 19.

Contact the requesting agency for any questions. Contact your local U.S. Small Business Administration office for any questions regarding Business Status.

6a-6c. Point of Contact. Provide this information for a representative of the firm that the agency can contact for additional information. The representative must be empowered to speak on contractual and policy matters.

7. Name of Firm. Enter the name of the firm if Part II is prepared for a branch office.

8a-8c. Former Firm Names. Indicate any other previous names for the firm (or branch office) during the last six years.

Insert the year that this corporate name change was effective and the associated DUNS Number. This information is used to review past performance on Federal contracts.

9. Employees by Discipline. Use the relevant disciplines and associated function codes shown at the end of these instructions and list in the same numerical order. After the listed disciplines, write in any additional disciplines and leave the function code blank. List no more than 20 disciplines. Group remaining employees under "Other Employees" in column b. Each person can be counted only once according to his/her primary function.

If Part II is prepared for a firm (including all branch offices), enter the number of employees by disciplines in column c(1). If Part II is prepared for a branch office, enter the number of employees by discipline in column c(2) and for the firm in column c(1).

10. Profile of Firm's Experience and Annual Average

Revenue for Last 5 Years. Complete this block for the firm or branch office for which this Part II is prepared. Enter the experience categories which most accurately reflect the firm's technical capabilities and project experience. Use the relevant experience categories and associated profile codes shown at the end of these instructions, and list in the same numerical order.

After the listed experience categories, write in any unlisted relevant project experience categories and leave the profile codes blank. For each type of experience, enter the appropriate revenue index number to reflect the professional services revenues received annually (averaged over the last 5 years) by the firm or branch office for performing that type of work. A particular project may be identified with one experience category or it may be broken into components, as best reflects the capabilities and types of work performed by the firm. However, do not double count the revenues received on a particular project.

11. Annual Average Professional Services Revenues of Firm for Last 3 Years. Complete this block for the firm or branch office for which this Part II is prepared. Enter the appropriate revenue index numbers to reflect the professional services revenues received annually (averaged over the last 3 years) by the firm or branch office. Indicate Federal work (performed directly for the Federal Government, either as the prime contractor or subcontractor), non-Federal work (all other domestic and foreign work, including Federally-assisted projects), and the total. If the firm has been in existence for less than 3 years, see the definition for "Annual Receipts" under FAR 19.101.

12. Authorized Representative. An authorized represent-ative of the firm or branch office must sign and date the completed form. Signing attests that the information provided is current and factual. Provide the name and title of the authorized representative who signed the form.

STANDARD FORM 330 (6/2004) PAGE 4 OF INSTRUCTIONS

List of Disciplines (Function Codes)

STANDARD FORM 330 (6/2004) PAGE 5 OF INSTRUCTIONS

Code Description

Hydraulic Engineer Hydrographic Surveyor Hydrologist Industrial Engineer Industrial Hygienist Interior Designer Land Surveyor Landscape Architect Materials Engineer Materials Handling Engineer Mechanical Engineer Mining Engineer Oceanographer Photo Interpreter Photogrammetrist Planner: Urban/Regional Project Manager Remote Sensing Specialist Risk Assessor Safety/Occupational Health Engineer Sanitary Engineer Scheduler Security Specialist Soils Engineer Specifications Writer Structural Engineer Technician/Analyst Toxicologist Transportation Engineer Value Engineer Water Resources Engineer

Code Description Acoustical Engineer Administrative Aerial Photographer Aeronautical Engineer Archeologist Architect Biologist CADD Technician Cartographer Chemical Engineer Chemist Civil Engineer Communications Engineer Computer Programmer Construction Inspector Construction Manager Corrosion Engineer Cost Engineer/Estimator Ecologist Economist Electrical Engineer Electronics Engineer Environmental Engineer Environmental Scientist Fire Protection Engineer Forensic Engineer Foundation/Geotechnical Engineer Geodetic Surveyor Geographic Information System Specialist Geologist Health Facility Planner

List of Experience Categories (Profile Codes)

Acoustics, Noise Abatement Aerial Photography; Airborne Data and Imagery Collection and Analysis Agricultural Development; Grain Storage; Farm Mechanization Air Pollution Control Airports; Navaids; Airport Lighting; Aircraft Fueling Airports; Terminals and Hangars; Freight Handling Arctic Facilities Animal Facilities Anti-Terrorism/Force Protection Asbestos Abatement Auditoriums & Theaters Automation; Controls; Instrumentation

Barracks; Dormitories Bridges

Cartography Cemeteries (Planning & Relocation) Charting: Nautical and Aeronautical Chemical Processing & Storage Child Care/Development Facilities Churches; Chapels Coastal Engineering Codes; Standards; Ordinances Cold Storage; Refrigeration and Fast Freeze Commercial Building (low rise) ; Shopping Centers Community Facilities Communications Systems; TV; Microwave Computer Facilities; Computer Service Conservation and Resource Management Construction Management Construction Surveying Corrosion Control; Cathodic Protection; Electrolysis Cost Estimating; Cost Engineering and Analysis; Parametric Costing; Forecasting Cryogenic Facilities

Dams (Concrete; Arch) Dams (Earth; Rock); Dikes; Levees Desalinization (Process & Facilities) Design-Build - Preparation of Requests for Proposals Digital Elevation and Terrain Model Development Digital Orthophotography Dining Halls; Clubs; Restaurants Dredging Studies and Design

Ecological & Archeological Investigations Educational Facilities; Classrooms Electrical Studies and Design Electronics Elevators; Escalators; People-Movers Embassies and Chanceries Energy Conservation; New Energy Sources Engineering Economics Environmental Impact Studies, Assessments or Statements Environmental and Natural Resource Mapping Environmental Planning Environmental Remediation Environmental Testing and Analysis

Fallout Shelters; Blast-Resistant Design Field Houses; Gyms; Stadiums Fire Protection Fisheries; Fish ladders Forensic Engineering Forestry & Forest products

Garages; Vehicle Maintenance Facilities;

Parking Decks

Gas Systems (Propane; Natural, Etc.)

Geodetic Surveying: Ground and Air-borne

Geographic Information System Services:

Development, Analysis, and Data Collection

Geospatial Data Conversion: Scanning, Digitizing, Compilation, Attributing, Scribing, Drafting Graphic Design

Harbors; Jetties; Piers, Ship Terminal Facilities Hazardous Materials Handling and Storage Hazardous, Toxic, Radioactive Waste Remediation Heating; Ventilating; Air Conditioning Health Systems Planning Highrise; Air-Rights-Type Buildings Highways; Streets; Airfield Paving; Parking Lots Historical Preservation Hospital & Medical Facilities Hotels; Motels Housing (Residential, Multi-Family;

Apartments; Condominiums) Hydraulics & Pneumatics Hydrographic Surveying

STANDARD FORM 330 (6/2004) PAGE 6 OF INSTRUCTIONS

Code Description Code Description A01 A02

A03 A04 A05 A06 A07 A08 A09 A10 A11 A12

B01 B02

C01 C02 C03 C04 C05 C06 C07 C08 C09 C10 C11 C12 C13 C14 C15 C16 C17 C18

C19

D01 D02 D03 D04 D05 D06 D07 D08

E01 E02 E03 E04 E05 E06 E07 E08 E09

E10

E11 E12 E13

F01 F02 F03 F04 F05 F06

G01

G02

G03

G04

G05

G06

H01

H02 H03

H04 H05 H06 H07

H08 H09 H10 H11

H12 H13

Product, Machine Equipment Design

Pneumatic Structures, Air-Support Buildings

Postal Facilities

Power Generation, Transmission, Distribution

Public Safety Facilities

Radar; Sonar; Radio & Radar Telescopes

Radio Frequency Systems & Shieldings

Railroad; Rapid Transit

Recreation Facilities (Parks, Marinas, Etc.)

Refrigeration Plants/Systems

Rehabilitation (Buildings; Structures; Facilities)

Remote Sensing

Research Facilities

Resources Recovery; Recycling

Risk Analysis

Rivers; Canals; Waterways; Flood Control

Roofing

Safety Engineering; Accident Studies; OSHA Studies

Security Systems; Intruder & Smoke Detection

Seismic Designs & Studies

Sewage Collection, Treatment and Disposal

Soils & Geologic Studies; Foundations

Solar Energy Utilization

Solid Wastes; Incineration; Landfill

Special Environments; Clean Rooms, Etc.

Structural Design; Special Structures

Surveying; Platting; Mapping; Flood Plain Studies

Sustainable Design

Swimming Pools

Storm Water Handling & Facilities

Telephone Systems (Rural; Mobile; Intercom, Etc.)

Testing & Inspection Services Traffic & Transportation Engineering Topographic Surveying and Mapping Towers (Self-Supporting & Guyed Systems) Tunnels & Subways

STANDARD FORM 330 (6/2004) PAGE 7 OF INSTRUCTIONS

Code Description Code Description I01 I02

I03

I04

I05

I06

J01

L01

L02

L03

L04

L05

L06

M01

M02

M03

M04

M05

M06

M07

M08

N01

N02

N03

O01 O02 O03

P01

P02

P03

P04

P05

P06

P07

P08

P09

P10

P11

P12

P13

R01

R02

R03

R04

R05

R06

R07

R08

R09

R10

R11

R12

S01

S02

S03

S04

S05

S06

S07

S08

S09

S10

S11

S12

S13

T01

T02 T03 T04 T05 T06

Industrial Buildings; Manufacturing Plants

Industrial Processes; Quality Control

Industrial Waste Treatment

Intelligent Transportation Systems

Interior Design; Space Planning

Irrigation; Drainage

Judicial and Courtroom Facilities

Laboratories; Medical Research Facilities

Land Surveying

Landscape Architecture

Libraries; Museums; Galleries

Lighting (Interior; Display; Theater, Etc.)

Lighting (Exteriors; Streets; Memorials;

Athletic Fields, Etc.)

Mapping Location/Addressing Systems

Materials Handling Systems; Conveyors; Sorters

Metallurgy

Microclimatology; Tropical Engineering

Military Design Standards

Mining & Mineralogy

Missile Facilities (Silos; Fuels; Transport)

Modular Systems Design; Pre-Fabricated Structures or Components

Naval Architecture; Off-Shore Platforms

Navigation Structures; Locks

Nuclear Facilities; Nuclear Shielding

Office Buildings; Industrial Parks Oceanographic Engineering Ordnance; Munitions; Special Weapons

Petroleum Exploration; Refining

Petroleum and Fuel (Storage and Distribution)

Photogrammetry

Pipelines (Cross-Country - Liquid & Gas)

Planning (Community, Regional, Areawide and State)

Planning (Site, Installation, and Project)

Plumbing & Piping Design

Prisons & Correctional Facilities

STANDARD FORM 330 (6/2004) PAGE 8 OF INSTRUCTIONS

Code Description U01

U02

U03

V01

W01

W02

W03

W04

Z01

Unexploded Ordnance Remediation

Urban Renewals; Community Development

Utilities (Gas and Steam)

Value Analysis; Life-Cycle Costing

Warehouses & Depots

Water Resources; Hydrology; Ground Water

Water Supply; Treatment and Distribution

Wind Tunnels; Research/Testing Facilities Design

Zoning; Land Use Studies

5. NAME OF FIRM

PART I - CONTRACT-SPECIFIC QUALIFICATIONS

ARCHITECT - ENGINEER QUALIFICATIONS

A. CONTRACT INFORMATION

1. TITLE AND LOCATION (City and State)

2. PUBLIC NOTICE DATE 3. SOLICITATION OR PROJECT NUMBER

B. ARCHITECT-ENGINEER POINT OF CONTACT

C. PROPOSED TEAM

(Complete this section for the prime contractor and all key subcontractors.)

4. NAME AND TITLE

8. E-MAIL ADDRESS7. FAX NUMBER6. TELEPHONE NUMBER

(Check)

P R

IM

E

J- V

P

A R

TN

E

R S

U B

C O

N

TR

A

C

TO

R

9. FIRM NAME 10. ADDRESS 11. ROLE IN THIS CONTRACT

a.

b.

c.

d.

e.

f.

STANDARD FORM 330 (6/2004) PAGE 1

D. ORGANIZATIONAL CHART OF PROPOSED TEAM (Attached)

CHECK IF BRANCH OFFICE

CHECK IF BRANCH OFFICE

CHECK IF BRANCH OFFICE

CHECK IF BRANCH OFFICE

CHECK IF BRANCH OFFICE

CHECK IF BRANCH OFFICE

12. NAME 13. ROLE IN THIS CONTRACT

18. OTHER PROFESSIONAL QUALIFICATIONS (Publications, Organizations, Training, Awards, etc.)

E. RESUMES OF KEY PERSONNEL PROPOSED FOR THIS CONTRACT

(Complete one Section E for each key person.)

14. YEARS EXPERIENCE

b. WITH CURRENT FIRMa. TOTAL

17. CURRENT PROFESSIONAL REGISTRATION (STATE AND DISCIPLINE)16. EDUCATION (DEGREE AND SPECIALIZATION)

15. FIRM NAME AND LOCATION (City and State)

STANDARD FORM 330 (6/2004) PAGE 2

a.

b.

c.

d.

(1) TITLE AND LOCATION (City and State)

PROFESSIONAL SERVICES CONSTRUCTION (If applicable)

(1) TITLE AND LOCATION (City and State) (2) YEAR COMPLETED PROFESSIONAL SERVICES CONSTRUCTION (If applicable)

(1) TITLE AND LOCATION (City and State) (2) YEAR COMPLETED PROFESSIONAL SERVICES CONSTRUCTION (If applicable)

(1) TITLE AND LOCATION (City and State) (2) YEAR COMPLETED PROFESSIONAL SERVICES CONSTRUCTION (If applicable) e.

Check if project performed with current firm

Check if project performed with current firm

(3) BRIEF DESCRIPTION (Brief scope, size, cost, etc.) AND SPECIFIC ROLE

(3) BRIEF DESCRIPTION (Brief scope, size, cost, etc.) AND SPECIFIC ROLE

(3) BRIEF DESCRIPTION (Brief scope, size, cost, etc.) AND SPECIFIC ROLE

Check if project performed with current firm

Check if project performed with current firm

(3) BRIEF DESCRIPTION (Brief scope, size, cost, etc.) AND SPECIFIC ROLE

19. RELEVANT PROJECTS

(1) TITLE AND LOCATION (City and State) (2) YEAR COMPLETED

PROFESSIONAL SERVICES CONSTRUCTION (If applicable)

(2) YEAR COMPLETED

(3) BRIEF DESCRIPTION (Brief scope, size, cost, etc.) AND SPECIFIC ROLE Check if project performed with current firm

F. EXAMPLE PROJECTS WHICH BEST ILLUSTRATE PROPOSED TEAM'S

QUALIFICATIONS FOR THIS CONTRACT

(Present as many projects as requested by the agency, or 10 projects, if not specified.

Complete one Section F for each project.)

a. PROJECT OWNER

21. TITLE AND LOCATION (City and State)

25. FIRMS FROM SECTION C INVOLVED WITH THIS PROJECT

24. BRIEF DESCRIPTION OF PROJECT AND RELEVANCE TO THIS CONTRACT (Include scope, size, and cost)

20. EXAMPLE PROJECT KEY

NUMBER

a.

b.

c.

d.

e.

f.

(1) FIRM NAME (2) FIRM LOCATION (City and State)

(3) ROLE(1) FIRM NAME (2) FIRM LOCATION (City and State)

(3) ROLE(1) FIRM NAME (2) FIRM LOCATION (City and State)

(3) ROLE(1) FIRM NAME (2) FIRM LOCATION (City and State)

STANDARD FORM 330 (6/2004) PAGE 3

(3) ROLE

(1) FIRM NAME (2) FIRM LOCATION (City and State) (3) ROLE

b. POINT OF CONTACT NAME

23. PROJECT OWNER'S INFORMATION

c. POINT OF CONTACT TELEPHONE NUMBER

(3) ROLE(1) FIRM NAME (2) FIRM LOCATION (City and State)

22. YEAR COMPLETED

PROFESSIONAL SERVICES CONSTRUCTION (If applicable)

TITLE OF EXAMPLE PROJECT (FROM SECTION F)

G. KEY PERSONNEL PARTICIPATION IN EXAMPLE PROJECTS

STANDARD FORM 330 (6/2004) PAGE 4

26. NAMES OF KEY

PERSONNEL

(From Section E, Block 12)

27. ROLE IN THIS

CONTRACT

(From Section E, Block 13) 1 2 3 4 5 6 7 8 9 10

29. EXAMPLE PROJECTS KEY

NO. TITLE OF EXAMPLE PROJECT (FROM SECTION F) NO.

28. EXAMPLE PROJECTS LISTED IN SECTION F

(Fill in "Example Projects Key" section below before completing table.

Place "X" under project key number for participation in same or similar role.)

H. ADDITIONAL INFORMATION

30. PROVIDE ANY ADDITIONAL INFORMATION REQUESTED BY THE AGENCY. ATTACH ADDITIONAL SHEETS AS NEEDED.

I. AUTHORIZED REPRESENTATIVE

The foregoing is a statement of facts.

31. SIGNATURE 32. DATE

33. NAME AND TITLE

STANDARD FORM 330 (6/2004) PAGE 5

PART II - GENERAL QUALIFICATIONS

(If a firm has branch offices, complete for each specific branch office seeking work.)

a. SIGNATURE

ARCHITECT-ENGINEER QUALIFICATIONS

2a. FIRM (OR BRANCH OFFICE) NAME

2b. STREET

2c. CITY 2d. STATE 2e. ZIP CODE

3. YEAR ESTABLISHED 4. DUNS NUMBER

5. OWNERSHIP

b. Discipline

c. No. of Employees

10. PROFILE OF FIRM'S EXPERIENCE

AND ANNUAL AVERAGE REVENUE FOR LAST 5 YEARS

b. Experience

c. Revenue Index

Number (see below)

STANDARD FORM 330 (6/2004) PAGE 6

1. SOLICITATION NUMBER (If any)

8a. FORMER FIRM NAME(S) (If any) 8b. YR. ESTABLISHED

9. EMPLOYEES BY DISCIPLINE

Total

(1) FIRM (2) BRANCH

1. Less than $100,000

2. $100,00 to less than $250,000

3. $250,000 to less than $500,000

4. $500,000 to less than $1 million

5. $1 million to less than $2 million

11. ANNUAL AVERAGE PROFESSIONAL

SERVICES REVENUES OF FIRM

FOR LAST 3 YEARS

(Insert revenue index number shown at right)

7. NAME OF FIRM (If block 2a is a branch office)

6a. POINT OF CONTACT NAME AND TITLE

6c. E-MAIL ADDRESS

8c. DUNS NUMBER

a. Federal Work

b. Non-Federal Work

c. Total Work

12. AUTHORIZED REPRESENTATIVE

The foregoing is a statement of facts.

b. DATE

c. NAME AND TITLE

a. Function Code

a. Profile Code

6b. TELEPHONE NUMBER

a. TYPE

b. SMALL BUSINESS STATUS

PROFESSIONAL SERVICES REVENUE INDEX NUMBER

6. $2 million to less than $5 million

7. $5 million to less than $10 million

8. $10 million to less than $25 million

9. $25 million to less than $50 million

10. $50 million or greater

Other Employees

Ohio A/E IDIQ 2010 Vendor Outreach

Date & Time:

Thursday 07/22/2010, 2:00pm EST

Location:

Howard M Metzenbaum U.S. Courthouse

201 Superior Ave

Room 506

Cleveland, Ohio 44114

Key Participants:

Zachary Anderson (Contracting Officer)

Ghainous Diallo (Contracting Officer’s Technical Representative)

Angela Jayjack (Project Manager, Selection Board Representative)

Anthony Outley (Small Business Specialist)

Agenda:

I. Overview A. Why you’re here (vendors):

i. Interested in new work

ii. Unfamiliar with GSA and available business opportunities

iii. Unfamiliar with the IDIQ and eligibility

iv. Want to know how to be considered for the IDIQ

B. Intent is to address these things in the outreach session II. Agency

A. What is GSA

i. General Services Administration

ii. (quote from InSite)

B. What is PBS

i. Public Building Service

ii. Landlord to the Federal Government

iii. (quote from InSite) C. What is PMSC

i. Property Management Service Center

ii. Repairs and alterations for shell and tenant improvements

iii. Interface with other client agencies

iv. (quote from InSite)

D. What is OSC

i. Territory covered:

a. State of Ohio

b. Federally owned facilities in Cleveland, Akron, Canton, Youngstown, Toledo, Columbus, Cincinnati, Dayton

c. Lease locations

III. IDIQ Contract A. What it is and how it works B. Explain previous IDIQ’s C. What is an A/E’s actual role?

i. Example job

ii. Roles and Responsibilities

a. Project Manager (COR)

b. Contracting Officer

c. Property Manager

d. Client Agency

e. A/E

iii. Codes and standards

a. GSA is AHJ

b. Still abides by state and local codes

c. Agency Design Standards

IV. How to Apply (Anthony Outley) A. Who’s eligible?

i. Small Businesses

ii. Define

B. CCR

C. Other info (tbd by Anthony Outley) V. FAQ’s applicable to this particular solicitation:

A. “I’m a small 1-2 man firm; how can I get involved?”

i. Zach/Ghainous to confirm/clarify:

ii. Collaborate with a team of consultants

B. “Is there a predictable amount of work?”

i. Zach/Ghainous to confirm/clarify:

ii. No

C. “Why have I never seen this before? Is this new?”

i. Zach/Ghainous to confirm/clarify:

ii. A/E IDIQ contracts are not new. In the past, larger firms have been on the contract. This year, it is being devoted solely to small businesses.

D. “If I have more questions, who do I contact?”

i. Anthony Outley

ii. Zachary Anderson

iii. Ghainous Diallo

iv. Angela Jayjack

• Can a firm "double apply" as both a prime and a subcontractor? Meaning, can they be considered if their name appears more than once? Yes

• Is there a short-list process? If so, can you elaborate on how it will work? Not officially since this is a one phase selection process, but if we do interviews those firms we decide to interview are in essence the short-list.

• Clarify where submittals should be sent - Cleveland or Chicago? Solicitation currently indicates Cleveland. Submittals are to be sent to Zachary Anderson, Contracting Officer, 230 South Dearborn Suite 3800, Chicago, IL 60604

• If a small business is listed as the prime, can they list a large business as a subcontractor?

Yes they can.

• Clarify what 6 resumes are needed. Are they for the prime's team members only? Or, are they intended to represent the breadth of services? The choice is up to offerer, cover a variety of disciplines/services. Also the team members submitted should have directly contributed to sample projects submitted.

• Can you elaborate more on what is needed to be included in the "Design Philosophy" Statement? Completely up to the Lead Designer. Some sample topics: Inspiration, what constitutes government architecture, security vs openness, sustainability, how this contract fits into their career, how they would approach the more nuts and bolts types of projects vs high design, etc. The aforementioned examples are in no way the only thing that can be included in the lead designer’s philosophy. This is just an effort on the part of the Government to fully answer the question.

• Is it required that the small business firm that will lead its design team has to do at least 51% of the work for the team to be legitimately led a “small business” endeavor. However, will favorable consideration be given to a small business firm that pledges to perform MORE than 51% or 52% of the design work on the task orders that will be assigned? FAR states that any prime contractor must do at least 12% of the scope of the total contract. No favorable consideration will be given to a small business that pledges to perform more than 50% of the work assigned.