Goetz General Arrangement.pdf
PDF 255 KB Posted
- Solicitation number
- W912ES23Q0095
About this file
This document contains a general arrangement drawing and related federal contract opportunity for annual vessel safety inspections. The general arrangement drawing depicts the layout and specifications of a 20-inch cutterhead suction dredge named Goetz, including machinery spaces, ballast tanks, void spaces, equipment locations, and dimensional data.
The related federal contract opportunity is a solicitation issued by the U.S. Army Corps of Engineers Engineering District St. Paul to conduct annual safety inspections of the dredge Goetz and another vessel named QB Taggatz. The solicitation includes the contract number, title specifying the vessels and type of inspections, and identifies the issuing agency. Offerors would inspect the dredges to ensure compliance with applicable safety regulations.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
BALLAST 6S
3740 39 38 3536 34
BALLAST 6P
HOLD PLAN
BOX COOLER
COMPARTMENT
BOX COOLER COMPARTMENT
VOID 5C
32 31 30 29
VOID 5S
28 27 26 25
UP
VOID 5P
COFFERDAM BELOW
FUEL OIL 4C
2024 23 22 21 1819 WO TK
OB TK
MAIN DECK PLAN
SEACHEST
SUCTION/DISCHARGE PIPE DIAMETER 22"/20"
INSTALLED POWER
3740 39 38 3536 34
4010 HP
DREDGING DEPTH
AIR DRAFT
LENGTH PONTOON
DEPTH
BREADTH
DRAFT
LENGTH O.A.
GENERAL CHARACTERISTICS
28' @ 45 DEGREES
45'-0"
8'-0"
39'-0"
5'-0"
225'-0"
200'-0"
32 31 30 29 28 27 26 25
DN
EYE
WASH
STA.
2024 23 22 21 1819 17
BRIDGE DECK PLAN
HEAD
32 31 30 29 28 27 26 25 20
EQUIPMENT
REMOVAL HATCH
24 23 22 21 1819 17 16
LC OF VESSEL
MACHINERY ROOM
VOID 3S
15 14 13 12 11 10 9 8
VOID 3P
UP
BALLAST 1P
BALLAST 1S
BALLAST 2S
7 6
PUMP ROOM
5 4 13 2 0
BALLAST 2P
EQUIPMENT
REMOVAL
MONORAIL
15 14 13 12
ELECTRICAL CONTOL ROOM
DN
11 10 9 8
UP
SB SWING WINCH
LOCAL/REM CENTER LINE STBD TOE
PORT TOE
BOOSTER PUMP MAIN PUMP
CONSOLE ENABLE
200*10
200*10
200*10
7 6 5 4 13 2
200*10
200*10
200*10
200*10
TOP DECK PLAN
15 14 13 12
SPUD CARRIER
STOP ENGINE
READY
DOWN
STOP
11 10
REVERSE
START
READY
information contained in this drawing for other customers than USACE contract DACW61-03-C-0033, and only if DACS provides the automation system for this contract. Signed, Jan 27, 2004. Peter S deJongThis drawing is made for OEM by DACS Inc., with the understanding that DACS supplies the automation system for the USACE 20" CS Dredge. DACS Inc. is the holder of all intellectual rights to this drawing. OEM Inc., has no right to disclose or use the
ST.CL
AUTO
SINGLE DIG
READY
STOPWINCH MODE
HOLD BACK TORQUE
START
PAY OUT
HAUL
AUTO SPEED
AUTO READY MANUALMANUAL
DOWN
SPEED
UP
SPEED
START STOP
AUTO FLOW
UP
START
READY CUTTER
REV
STOP
SPEED
START
AUTO SWING
CALL ER
information contained in this drawing for other customers than USACE contract DACW61-03-C-0033, and only if DACS provides the automation system for this contract. Signed, Jan 27, 2004. Peter S deJongThis drawing is made for OEM by DACS Inc., with the understanding that DACS supplies the automation system for the USACE 20" CS Dredge. DACS Inc. is the holder of all intellectual rights to this drawing. OEM Inc., has no right to disclose or use the information contained in this drawing for other customers than USACE contract DACW61-03-C-0033, and only if DACS provides the automation system for this contract. Signed, Jan 27, 2004. Peter S deJongThis drawing is made for OEM by DACS Inc., with the understanding that DACS supplies the automation system for the USACE 20" CS Dredge. DACS Inc. is the holder of all intellectual rights to this drawing. OEM Inc., has no right to disclose or use the information contained in this drawing for other customers than USACE contract DACW61-03-C-0033, and only if DACS provides the automation system for this contract. Signed, Jan 27, 2004. Peter S deJongThis drawing is made for OEM by DACS Inc., with the understanding that DACS supplies the automation system for the USACE 20" CS Dredge. DACS Inc. is the holder of all intellectual rights to this drawing. OEM Inc., has no right to disclose or use the information contained in this drawing for other customers than USACE contract DACW61-03-C-0033, and only if DACS provides the automation system for this contract. Signed, Jan 27, 2004. Peter S deJongThis drawing is made for OEM by DACS Inc., with the understanding that DACS supplies the automation system for the USACE 20" CS Dredge. DACS Inc. is the holder of all intellectual rights to this drawing. OEM Inc., has no right to disclose or use the
DROP
HOIST
STOP
LOWER
HOLD BACK TORQUE
HAUL
START
PAY OUT
STOP
STBD SPUD
READY
DROP
HOIST
START STOP
LOWER
FORWARD
STOP
READY
CENTER SPUD
AUTO/MANSTART ENGINE
START
READY
HOIST
START
LOWER
STOP
LADDER
READY
SPEED
PORT SWING WINCH
BOOSTER
DN
LC OF VESSEL
7 12 11 10 9
LC OF VESSEL
8 7
LC OF VESSEL
RUBBER
FENDER
(TYP)
UP
SPUDWELL
CRANE
CRANE
UP
TOW HITCH
7 6 5 4 3 2 18
D
C
B
A
B
C
D
A
8 7 6 5 4 3 2 1
APPROVED
REVISIONS
DESCRIPTIONREV DATE
6401 W Sam Houston Pkwy N-Houston, Texas 77041 (713)680-9659-FAX(713)957-1249
OILFIELD-ELECTRIC-MARINE, INC.
DRAWING TITLE
CUSTOMER/PROJECTAPPROVALS DATE
DRAWN
CHECKED
APPROVED JOB NO.
OFSHEET
SCALE:
REV.
DEPARTMENT OF THE ARMY
MARINE DESIGN CENTER
CORPS OF ENGINEERS
DRAWING NO.
JIMB 2/19/04
1/8"=1'-0"
GENERAL ARRANGEMENT
20-INCH CUTTERHEAD SUCTION DREDGE
659-D215-01
UP
VOID 5AS
VOID 5AP
+0.010
+0.010
CO-2 Room
02457
Model
File details come from the government source that posted it. Updated .