G3-0020 MK75 Liner Bushings SOW.pdf
PDF 388 KB Posted
- Attached to
- MK 75 Liner Bushings
- Solicitation number
- N0017425R0034
About this file
This Statement of Work (SOW) details requirements for the fabrication, preservation, packaging and shipment of 4 MK 75 Liner Bushings (P/N: 53711, NAVSEA Drawing #5520155) for the Royal Saudi Naval Forces through a Foreign Military Sales (FMS) contract.
The vendor must fabricate the bushings according to NAVSEA specifications, apply corrosion preventive compound MIL-PRF-16173 to non-plated surfaces and lubricating oil MIL-PRF-3150 to plated surfaces, and package them in wood crates for overseas shipment. Inspection will be conducted at origin by DCMA QAR. The finished products will be shipped via New York Forwarding Services to the Royal Saudi Naval Forces at King Abdul Aziz Naval Base in Jubail, Saudi Arabia. Key documentation requirements include test results, Certificates of Compliance, Material Certifications, DD-250/Certificate of Performance, and Certificate of Conformance, which must be submitted within 10-14 days of inspection completion. The Naval Surface Warfare Center Indian Head Division (NSWC IHD) serves as the In-Service Engineering Agent (ISEA) for this procurement.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| N0017425R0034.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
21 Nov 2024
SUBJECT: Competitive Procurement for 4ea MK 75 Liner Bushings for FMS Saudi
STATEMENT OF WORK:
1) Description
a) The vendor shall fabricate, preserve, package and prepare for shipment a quantity of 4ea of the following items:
Item No. Part No. Item Description Quantity
P/N: 53711- NAVSEA
Drawing #5520155 (attached)
With Exceptions (attached)
76mm MK 75 MK75 Liner Bushings 4
2) Task Description
a) The vendor shall fabricate 4ea MK 75 MK75 Liner Bushings as per NAVSEA Drawing
#5520155 with Exceptions. This is listed as Item No. 001 above.
b) At completion, the vendor shall prepare the required item(s) for freight forwarder direct shipment to the FMS activity requiring the parts. (Shipment of the required item shall be at the expense of the FMS activity.)
3) Packaging, Delivery and Performance
a) At a minimum, each line item shall be tagged with NAVSEA part number, part nomenclature, and packaged & wood-crated in accordance with best commercial practice for overseas shipment, unless otherwise noted in this SOW. For preservation, apply a coat of corrosion preventive compound per MIL-PRF-16173, Grade II, Class 1, to non-plated surfaces and apply a coat of lubricating oil per MIL-PRF-3150 to all plated surfaces.
i) The finished Liner Bushings shall be transported by the designated FMS freight forwarder for return shipment to the RSNF in Jubail, Saudi Arabia. The vendor shall notify the
MK75 ISEA identified in para 4a below when the Liner Bushings are ready for shipment.
If prior arrangements for shipment have not been made by the FMS customer or another freight forwarder or expeditor, the U. S. Government may provide any necessary charge numbers, delivery addresses and/or TACs for final shipment.
ii) Freight Forwarder:
New York Forwarding Services, Inc.
249 Shipyard Boulevard, Wilmington, NC 28412-6227
POC: Debra Guyton, 910-343-8900 x125
Email: debby.guyton@nyforwarding.com mailto:debby.guyton@nyforwarding.com
iii) End Customer:
Royal Saudi Naval Forces
King Abdul Aziz Naval Base, Naval Supply Center
Jubail, Kingdom of Saudi Arabia
Attn: NAVSEA USMTM NFD
b) Unless otherwise directed, inspection shall be at origin by DCMA Quality Assurance
Representative (QAR).
c) Completed signed copies of the test results shall be packaged with each respective unit.
Certificates of Compliance and Material Certifications for all items produced under this contract are due ten (10) days after completion of inspection.
d) The DD-250 or Certificate of Performance completed herein shall be delivered to NSWC
IHD/Picatinny G31, Jeremy Phillips, e-mail address Jeremy.m.phillips24.civ@us.navy.mil , no later than fourteen (14) days after receipt of written direction to proceed with inspection/assessment.
e) A copy of each DD-250 or Certificate of Performance shall be accompanied by a Certificate of Conformance (COC). Each COC shall be provided to Code G33, Kenneth Shedlock, e-mail address: kenneth.shedlock.civ@us.navy.mil.
4) Points of Contact
a) The In-Service Engineering Agent (ISEA) point of contact is Mr. Kenneth Shedlock, NSWC
Indian Head Division G33, (973) 724-1317, e-mail address:
kenneth.shedlock.civ@us.navy.mil. Alternate POC is Joshua Solomon, (973) 724-9928, e-mail address: joshua.z.solomon.civ@us.navy.mil
Reviewed/Approved by:
Kenneth (Ken) Shedlock
MK 75 ISEA Team Leader & FMS Liaison
MK 11 ISEA Team Leader
MK 110 ISEA
Naval Surface Warfare Center Indian Head, Picatinny Detachment
3rd Ave, Bldg #61N
Code G33, Medium Caliber Gun Systems Branch
Mechanical Engineer
COMM: 973-724-1317, DSN 880-1317
Cell: 609-658-3387
Email: kenneth.shedlock.civ@us.navy.mil mailto:Jeremy.m.phillips24.civ@us.navy.mil mailto:kenneth.shedlock.civ@us.navy.mil mailto:kenneth.shedlock.civ@us.navy.mil mailto:joshua.z.solomon.civ@us.navy.mil mailto:kenneth.shedlock.civ@us.navy.mil
File details come from the government source that posted it. Updated .