A2. UPDATED Salient Characteristics 133 Army Band Sound Reset.pdf

Salient Characteristics

1. The requirement is for Sound System for 133rd Army Bank, WAARNG.

2. Vendor must quote “all” or “nothing”

3. This is a total small business set aside. Brand Name or Equal.

4. Warranty information must be specified.

5. Shipping is to WAARNG, Campy Murray, 98430. Detailed address will be provided later.

Item

No

Description Brand

Name

(MFR)

Notes Qty Unit Price Total Price

CABLES

1 Pro Co S114NN 4-conductor speakON to speakON Speaker Cable

ProCo 11 AWG cable, 4 conductors, Neutrik SpeakON connectors on each end. 50 Ft long.

2 Pro Co S114NN 4-conductor speakON to speakON Speaker Cable

ProCo 11 AWG cable, 4 conductors, Neutrik SpeakON connectors on each end. 100 Ft long.

3 Pro Co S114NN 4-conductor speakON to speakON Speaker Cable

ProCo 11 AWG cable, 4 conductors, Neutrik SpeakON connectors on each end. 25 Ft long.

4 DrumDrop ND Stage

Box and Snake

Whirlwind 25 ft in total length. 12 channel audio snake cable.

Cable is heavy duty, flexible, NEC CM rated multipair cable. Each pair contains two twisted 24GA 7x32 polyethylene insulated conductors with 100% foil shield and 24GA drain wire. Cable jacket is blue PVC.

All fantail breakouts covered in braided monofilament

(i.e. Snakeskin) for increased durability. 12 XLR male connectors on 3 ft length fantails. 8 XLR female connectors on 8.5 ft length fantails, labeled sequentially with numbers "1" through "8". 4 XLR female box connectors housed in a stainless steel stage box labled sequentially with numbers "9" through

"12". These connections are inline between the 12

XLR male connectors and 8 XLR female connectors.

XLR Connectors are Whirlwind brand or equivalent

5 Medusa MS-8-4-XL-50 Whirlwind Heavy duty powder coated steel stagebox with Metal

Whirlwind connectors and integrated handle.

Whirlwind by Belden NEC CM rated multipair cable, heavy duty, flexible, multipair cable. Each pair contains two twisted 24GA 7x32 polyethylene insulated conductors with 100% foil shield and 24GA drain wire. Fanouts with multiple layers of rugged heat shrink at the most critical points. Fanouts feature

Whirlwind connectors with engraved numbers and letters. Genuine Kellems® wire mesh hanger to support the fanout at the board. Genuine Kellems® strain relief and grip with internal cable clamp.

SnakeSkin® on the fanouts for ultimate fanout protection. Pig Bag® to protect the fanouts when not in use. 8 channels XLR inputs, 4 channels XLR returns. 50' total length. XLR Connectors are

Whirlwind brand or equivalent

6 Mini 6 - 6-channel Low-profile Drop Snake - 25 foot

Whirlwind Whirlwind Mini 6 Low Profile Drop Snake. 25 ft in total length. 12 channel audio snake cable. Cable is heavy duty, flexible, NEC CM rated multipair cable.

Each pair contains two twisted 24GA 7x32 polyethylene insulated conductors with 100% foil shield and 24GA drain wire. Cable jacket is blue PVC.

All fantail breakouts covered in braided monofilament

(i.e. Snakeskin) for increased durability. 6 XLR male connectors on 2 ft length fantails. 6 XLR female box connectors housed in a stainless steel stage box labeled sequentially with numbers "1" through "6". XLR

Connectors are Whirlwind brand or equivalent

7 PSMN Premium Mic

Cable with Neutrik XX

Cord Ends - 10ft

EWI

(audiopile.

net)

EWI PSMN Premium XLR cable is a twisted pair with braided shield premium mic cable and Genuine

Neutrik XX Series cord ends. Cable to be built with

EWI PCB-1560 cabling. Cable to contain 2 ea. 22 gauge signal conductors, each constructed of 60 strands of 0.08mm high purity annealed copper. The braided shield to be constructed of 112 strands of

0.08mm tinned high purity annealed copper tightly braided to give 98% shield coverage. Cable outer jacket to be constructed with Super Flexible Innocuous

Neoprene PVC (SFIN PVC) to resist tangles and remain flexible. Conductor insulation to be constructed of Cross-linked Polyethylene (XLPE). The cord ends

(connectors) to be Neutrik (Liechtenstein) brand, models NC3FXX (female) and NC3MXX (male).

These are three pin XLR type connectors. Cables to be shrink-tube labeled on both ends identifying the model type and length.

8 PSMN Premium Mic

Cable with Neutrik XX

Cord Ends - 15ft

EWI

(audiopile.

net)

EWI PSMN Premium XLR cable is a twisted pair with braided shield premium mic cable and Genuine

Neutrik XX Series cord ends. Cable to be built with

EWI PCB-1560 cabling. Cable to contain 2 ea. 22 gauge signal conductors, each constructed of 60 strands of 0.08mm high purity annealed copper. The braided shield to be constructed of 112 strands of

0.08mm tinned high purity annealed copper tightly braided to give 98% shield coverage. Cable outer jacket to be constructed with Super Flexible Innocuous

Neoprene PVC (SFIN PVC) to resist tangles and remain flexible. Conductor insulation to be constructed of Cross-linked Polyethylene (XLPE). The cord ends

(connectors) to be Neutrik (Liechtenstein) brand, models NC3FXX (female) and NC3MXX (male).

These are three pin XLR type connectors. Cables to be shrink-tube labeled on both ends identifying the model type and length. 15FT.

9 Mini 12 - 12-channel

Low-profile Drop Snake

- 25 foot

Whirlwind Whirlwind Mini 12 Low Profile Drop Snake. 12 channel audio snake cable. Cable is heavy duty, flexible, NEC CM rated multipair cable. Each pair contains two twisted 24GA 7x32 polyethylene insulated conductors with 100% foil shield and 24GA drain wire. Cable jacket is blue PVC. All fantail breakouts covered in braided monofilament (i.e.

Snakeskin) for increased durability. 12 XLR male connectors on 2 ft length fantails. 12 XLR female box connectors housed in a stainless steel stage box labeled sequentially with numbers "1" through "12". Total lengths: 25' . XLR Connectors are Whirlwind brand or equivalent

10 Mini 12 - 12-channel

Low-profile Drop Snake

- 50 foot

Whirlwind Whirlwind Mini 12 Low Profile Drop Snake. 12 channel audio snake cable. Cable is heavy duty, flexible, NEC CM rated multipair cable. Each pair contains two twisted 24GA 7x32 polyethylene insulated conductors with 100% foil shield and 24GA drain wire. Cable jacket is blue PVC. All fantail breakouts covered in braided monofilament (i.e.

Snakeskin) for increased durability. 12 XLR male connectors on 2 ft length fantails. 12 XLR female box connectors housed in a stainless steel stage box labeled sequentially with numbers "1" through "12". Total lengths: 50' . XLR Connectors are Whirlwind brand or equivalent

11 MP-105 | Female XLR to

1/4" TRS Adapter Cable

- 10ft

EWI

(audiopile.

net)

MP-105 | Female XLR to 1/4" TRS Adapter Cable, 10ft. Cable spec: No. of inner conductors: 2 x

0.22mm² ( 24AWG ); Copper strand per conductor:

20 x 0.12mm; Conductor insulation: PVC 1.8mm;

Shielding: Braided shield 0.12TA x 7 x 16; Shield coverage: 95%; Capacitance cond. per 1 m: 71pF;

Capacitance shield cond. per 1 m: 124pF; Conductor resistance per 1 KM: 76O; Temperature range: -20°C to +70°Cl; Jacket diameter: 6.7mm; Jacket color:

Black; Weight per 100 m: 5.5Kgs. The Female XLR end is wired through to the 1/4" Male TRS end as follows: 1. Pin One FXLR to Sleeve of MTRS; 2. Pin

Two FXLR to Tip of MTRS; 3. Pin Three FXLR to

Ring of MTRS. Connectors will be EWI model P292S-

BKG, and EWI model ES3FB-GDP or equivalent.

12 MP-106 | Male XLR to

1/4" TRS Adapter Cable

- 10ft

EWI

(audiopile.

net)

MP-106 | Male XLR to 1/4" TRS Adapter Cable, 10ft.

Cable spec: No. of inner conductors: 2 x 0.22mm²

( 24AWG ); Copper strand per conductor: 20 x

0.12mm; Conductor insulation: PVC 1.8mm;

Shielding: Braided shield 0.12TA x 7 x 16; Shield coverage: 95%; Capacitance cond. per 1 m: 71pF;

Capacitance shield cond. per 1 m: 124pF; Conductor resistance per 1 KM: 76O; Temperature range: -20°C to +70°Cl; Jacket diameter: 6.7mm; Jacket color:

Black; Weight per 100 m: 5.5Kgs. The Male XLR end is wired through to the 1/4" Male TRS end as follows:

1. Pin One MXLR to Sleeve of MTRS; 2. Pin Two

MXLR to Tip of MTRS; 3. Pin Three MXLR to Ring of MTRS. Connectors will be EWI model P292S-

BKG, and EWI model ES3MB-GDP or equivalent.

13 RF Venue RG8X25 BNC to BNC cable - 25 foot

RF Venue High quality 50 ohm cable with double shielded, braid-over foil design, Male BNC connectors on each end.

25 ft.

14 RF Venue RG8X25 BNC to BNC cable - 50 foot

RF Venue High quality 50 ohm cable with double shielded, braid-over foil design, Male BNC connectors on each end.

50 ft.

15 cat5 Data Cable - 3ft Any High performance Internet Cable is Cat5E rated.

Provides universal connectivity for LAN network components.

16 PSMN Premium Mic

Cable with Neutrik XX

Cord Ends - 30ft

EWI

(audiopile.

net)

EWI PSMN Premium XLR cable is a twisted pair with braided shield premium mic cable and Genuine

Neutrik XX Series cord ends. Cable to be built with

EWI PCB-1560 cabling. Cable to contain 2 ea. 22 gauge signal conductors, each constructed of 60 strands of 0.08mm high purity annealed copper. The braided shield to be constructed of 112 strands of

0.08mm tinned high purity annealed copper tightly braided to give 98% shield coverage. Cable outer jacket to be constructed with Super Flexible Innocuous

Neoprene PVC (SFIN PVC) to resist tangles and remain flexible. Conductor insulation to be constructed of Cross-linked Polyethylene (XLPE). The cord ends

(connectors) to be Neutrik (Liechtenstein) brand, models NC3FXX (female) and NC3MXX (male).

These are three pin XLR type connectors. Cables to be shrink-tube labeled on both ends identifying the model type and length. 30 FT.

17 PSMN Premium Mic

Cable with Neutrik XX

Cord Ends - 50ft

EWI

(audiopile.

net)

EWI PSMN Premium XLR cable is a twisted pair with braided shield premium mic cable and Genuine

Neutrik XX Series cord ends. Cable to be built with

EWI PCB-1560 cabling. Cable to contain 2 ea. 22 gauge signal conductors, each constructed of 60 strands of 0.08mm high purity annealed copper. The braided shield to be constructed of 112 strands of

0.08mm tinned high purity annealed copper tightly braided to give 98% shield coverage. Cable outer jacket to be constructed with Super Flexible Innocuous

Neoprene PVC (SFIN PVC) to resist tangles and remain flexible. Conductor insulation to be constructed of Cross-linked Polyethylene (XLPE). The cord ends

(connectors) to be Neutrik (Liechtenstein) brand, models NC3FXX (female) and NC3MXX (male).

These are three pin XLR type connectors. Cables to be shrink-tube labeled on both ends identifying the model type and length. 50 FT.

18 AH10885 Cat 6

Etherflex Cable with etherCON Connectors -

164 foot Reel

Allen &

Heath AH10885 Cat 6 Etherflex Cable Drum with etherCON

Connectors - 164 foot Reel. 164ft reel of shielded

CAT6 cable with Neutrik EtherCon locking connectors on each end. Cable is black in color. Cable drum is able to stand on its own, and provides the ability to secure the cable once the cable is reeled up on the drum. The drum enables access to both ends of the cable at all times, including when cable is completely reeled up on the drum.

19 PSMN Premium Mic

Cable with Neutrik XX

Cord Ends - 5ft

EWI

(audiopile.

net)

EWI PSMN Premium XLR cable is a twisted pair with braided shield premium mic cable and Genuine

Neutrik XX Series cord ends. Cable to be built with

EWI PCB-1560 cabling. Cable to contain 2 ea. 22 gauge signal conductors, each constructed of 60 strands of 0.08mm high purity annealed copper. The braided shield to be constructed of 112 strands of

0.08mm tinned high purity annealed copper tightly braided to give 98% shield coverage. Cable outer jacket to be constructed with Super Flexible Innocuous

Neoprene PVC (SFIN PVC) to resist tangles and remain flexible. Conductor insulation to be constructed of Cross-linked Polyethylene (XLPE). The cord ends

(connectors) to be Neutrik (Liechtenstein) brand, models NC3FXX (female) and NC3MXX (male).

These are three pin XLR type connectors. Cables to be shrink-tube labeled on both ends identifying the model type and length. 5FT

20 PSMN Premium Mic

Cable with Neutrik XX

Cord Ends - 20ft

EWI

(audiopile.

net)

EWI PSMN Premium XLR cable is a twisted pair with braided shield premium mic cable and Genuine

Neutrik XX Series cord ends. Cable to be built with

EWI PCB-1560 cabling. Cable to contain 2 ea. 22 gauge signal conductors, each constructed of 60 strands of 0.08mm high purity annealed copper. The braided shield to be constructed of 112 strands of

0.08mm tinned high purity annealed copper tightly braided to give 98% shield coverage. Cable outer jacket to be constructed with Super Flexible Innocuous

Neoprene PVC (SFIN PVC) to resist tangles and remain flexible. Conductor insulation to be constructed of Cross-linked Polyethylene (XLPE). The cord ends

(connectors) to be Neutrik (Liechtenstein) brand, models NC3FXX (female) and NC3MXX (male).

These are three pin XLR type connectors. Cables to be shrink-tube labeled on both ends identifying the model type and length. 20FT

21 Pro Co PWRCON20-3 powerCon A to B Cable -

3 foot

ProCo 20A-rated assembly packed in a secure-locking, compact housing. Color-coded, power-in (blue) and power-out (gray) PowerCon connectors to avoid intermating. 12/3-type SJOOW cable with 3 individually insulated 12 AWG-stranded conductors inside a larger jacket. Highly durable, oil- and moisture-proof, and resistant to kinking. 3ft length.

22 Pro Co PWRCON/15M-

25 PowerCon 15 Amp

Cable - 25'

ProCo 12/3-type SJOOW cable with 3 individually insulated

12 AWG-stranded conductors inside a larger jacket.

Highly durable, oil- and moisture-proof, and resistant to kinking. Neutrik PowerCon A (blue) connector on one end Edison connector on the other end. Minimum

15A rating. 25 ft.

CASES

23 DR002H-2T | Road Case

Style 4 Drawer Tool Box

With Tabletop Door

EWI

(audiopile.

net)

Heavy duty construction: Tough 3/8" plywood and

ABS laminate panels. 4 drawers mounted on slide rails; The top 3 drawers are 4 1/2" deep and the bottom drawer is 8 1/2" deep. All 4 drawers measure 18 1/8" from front to back and 17 3/8" from left to right on the inside. The drawers are fully padded on the inside with thin close-cell foam. Removable, hinged front cover;

Cover attaches to form a table; table top is 30 1/8" tall when attached; Recessed butterfly latches and padded flip handles; Aluminum extrusion; Large steel ball corners; Chrome plated hardware. Four 4" swivel casters including two which are locking style; Height:

36 3/16" (measured on casters); Front to back: 24

3/16" (measured at ball corners); Left to right: 21 1/2"

(measured at ball corners). Weight 115lbs.

24 R10U | 10 Space

Equipment Rack with

Casters

EWI

(audiopile.

net)

18.25" rack depth measured from the front rack rails to the rear rack rails. The rails are 10U (17.5") in height and are drilled and tapped for standard #10 x 32 racking screws. Suitable for all standard 19" wide rack gear. Side panels are constructed with 3/8 inch hardwood plywood and covered with a black ABS laminate finish. The extrusion is all aluminum and the case is assembled with quality aluminum rivets. The rivets on the 4 recessed padded flip handles are backed with washers to ensure strength and durability. The cases roll on 4 heavy duty 4" swivel casters, two of which are braking style. The case is equipped with two removable lids. Each lid has four heavy duty chromed ball corners and the inside of the lids are fully padded with medium density foam rubber. The lids are secured to the case using 2 recessed butterfly latches per lid.

Either lid will fit on either side of the case, right-side up or upside down.

25 3U RACK DRAWER Middle

Atlantic Height: 5-1/4" (3U), Width 19", Weight 17.71 lbs.

Finish: Black. Fully enclosed top ensures that the contents stay in, and dust and cabling stay out. Front panel has a flush, spring loaded latch that engages when the drawer is closed. Full extension ball-bearing slides smoothly extend the drawer out 14". Bottom is easily removed by depressing side releases on the slides. 16 gauge steel body. No-slip drawer mat. Rear cable grommet.

26 R12U | 12 Space Heavy

Duty Amplifier Rack

Case with Casters

EWI

(audiopile.

net)

18.25" rack depth measured from the front rack rails to the rear rack rails. The rails are 12U (21") in height and are drilled and tapped for standard #10 x 32 racking screws. These racks are suitable for all standard 19" wide rack gear. Side panels are constructed with 3/8 inch hardwood plywood and covered with a black ABS laminate finish. The extrusion is all aluminum and the case is assembled with quality aluminum rivets. The rivets on the 4 recessed padded flip handles are backed with washers to ensure strength and durability. The cases roll on 4 heavy duty 4" swivel casters, two of which are braking

Style. The case is equipped with two removable lids.

Each lid has four heavy duty chromed ball corners and the inside of the lids are fully padded with medium density foam rubber. The lids are secured to the case using 2 recessed butterfly latches per lid. Either lid will fit on either side of the case, right-side up or upside down.

27 Middle Atlantic Products

D2 2U Heavy-duty Rack

Drawer

Middle

Atlantic Height: 3.5" (2U), Ext. Width 19", Int. Width 15.87", Int Depth 14.5". Finish: Black. Fully enclosed top ensures that the contents stay in, and dust and cabling stay out. Front panel has a flush, spring loaded latch that engages when the drawer is closed. Full extension ball-bearing slides smoothly extend the drawer out 14".

Bottom is easily removed by depressing side releases on the slides. 16 gauge steel body. No-slip drawer mat.

28 R14U-18 | 14 Space

Heavy Duty Amplifier

Rack Case with Casters

EWI

(audiopile.

net)

18.25" rack depth measured from the front rack rails to the rear rack rails. The rails are 14U (24.5") in height and are drilled and tapped for standard #10 x 32 racking screws. These racks are suitable for all standard 19" wide rack gear. Side panels are constructed with 3/8 inch hardwood plywood and covered with a black ABS laminate finish. The extrusion is all aluminum and the case is assembled with quality aluminum rivets. The rivets on the 4 recessed padded flip handles are backed with washers to ensure strength and durability. The cases roll on 4 heavy duty 4" swivel casters, two of which are braking style The case is equipped with two removable lids.

Each lid has four heavy duty chromed ball corners and the inside of the lids are fully padded with medium density foam rubber. The lids are secured to the case using 2 recessed butterfly latches per lid. Either lid will fit on either side of the case, right-side up or upside down.

29 ProX XZF-AH-C3500-

LMA Flip-Ready Easy

Retracting Hydraulic Lift

Case for Allen and Heath

DLive C3500 Console by

ZCase

ProX Flip-Ready™ ATA-300 Flight/Road Case Exclusively by ProX in North America; ZCase® Patent Pending

Rotational Mechanism. All Hardware by Penn

Elcom®; Vibro-Insulation System™ for Internal

Vibration Protection; Standard Silver on Black Design;

Large Doghouse Area With Left and Right Openings.

Laminated 3/4" & 3/8" Plywood and Solid Wood

Components; gas-powered rotational mechanism ;Rubber Spring Action Recessed Handles;

Easy Locking - Precision Fit Aluminum Tongue and

Groove. Heavy and Powerful Steel Ball Corners &

Dual Anchor Rivets; Recessed Industrial Butterfly

Twist-Lock Latches; Four Industrial Grade 4" Locking

Casters With Self Centering. Built to fit A&H DLive

C3500 or the equivalent console/control surface selected for procurement as part of this contract.

ProX Live Performance Gear® One Year Warranty ;

Exterior Dimensions & Weight: 36.50"H x 16.50"W x

42.50"L - Weight: 142.00 lbs

30 XS-UTL483036W

TruckPaX Heavy-duty

Truck Pack Utility Flight

Case with Dividers, Tray

Kit, and Casters - 2 Pack

ProX 2-Pack; XS-UTL483036W TruckPaX Heavy-duty

Truck Pack Utility Flight Case with Dividers, Tray Kit, and Casters - 2 Pack; Each Trunk: Type: Storage

Trunk Flight/Road Case with Dividers; Interior

Length: 46"; Interior Width: 28"; Interior Depth: 28";

Exterior Length: 48.5"; Exterior Width: 30.5"; Exterior

Depth: 36"; Interior Materials: High-density Foam;

Exterior Materials: 1/2" Laminated Plywood, Outward

Honeycomb Digital laminate, steel ball corners, and certified aluminum rivets, Industrial recessed butterfly twist-lock latches; Handles/Straps: 8 x Handles;

Casters: 2 x 4" Casters (locking), 2 x 4" Casters;

Weight: 162 lbs.; Manufacturer Part Number: XS-

UTL483036W MK2

31 ProX XS-7DTW 7-drawer Workstation

Road Case

ProX 7-drawer Case with Folding Table Lid: 7-drawer workstation road case with side worktable mounts on either side; Easy locking-fit tongue-and-groove construction with dual-anchor rivets, robust steel ball corners, and industrial-grade rubber feet; Industrial recessed butterfly lock latches provide added security;

Recessed spring-action handles and heavy-duty rubber caster wheels; Includes 3 x 2U rack drawers, 3 x 3U rack drawers, and 1 x 6U rack drawers. Exterior

Length: 23"; Exterior Width: 23"; Exterior Depth: 40";

Interior Materials: High-density Foam; Exterior

Materials: 3/8" Laminated Plywood - ProX Signature

Series Honeycomb Digital Certified laminated plywood exterior. Handles/Straps: 4 x ; Handles

Pockets: 3 x 2U Drawers, 3 x 3U Drawers, 1 x 6U

Drawer, Casters: 2 x Casters (locking), 2 x Casters, Weight: 110 lbs. Manufacturer Part Number: XS-

7DTW

MIC

ROP

HON

E

32 SM58 Dynamic

Microphone (NO

SWITCH)

Shure Metal construction. Microphone Type: Dynamic; Polar

Pattern: Cardioid; Frequency Response: 50Hz-15kHz.

Max SPL: 160dB SPL @ 1kHz; Output Impedance:

150 ohms; Sensitivity: -54.5 dBV/Pa (1.85 mV).

Color: Black Body, Nickel Grille; Connector: XLR;

Dimensions: 6.37" x 2"; Weight: 0.65 lbs. Included

Accessories: Carry Pouch, Mic Clip; Manufacturer

Part Number: SM58-LC.

33 SM57 Dynamic

Microphone

Shure Type: Dynamic. Frequency Response: 40 to 15,000

Hz; Polar Pattern: Cardioid; Sensitivity: (at 1,000 Hz

Open Circuit Voltage): *(1 Pa = 94 dB SPL); Open

Circuit Voltage: -56.0 dBV/Pa* (1.6 mV). Impedance:

Rated impedance is 150Ù (310Ù actual) for connection to microphone inputs rated low impedance.; Polarity:

Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3.; Case: Dark gray, enamel-painted, die-cast steel with a polycarbonate grille and a stainless steel screen.;

Connector: Three-pin professional audio connector

(male XLR type); Net Weight: 284 grams (10 oz);

Dimensions: 157 mm (6-3/16 in.) L x 32 mm (1-1/4 in.) W at the widest point.

34 e609 Dynamic

Microphone

Sennheiser Made for micing guitar amplifiers. Transducer principle dynamic; Frequency response 40 - 15,000

Hz; Pick-up pattern super-cardioid. Sensitivity (free field, no load) 1.5 mV/Pa; Nominal impedance (at 1 kHz) 350 Ω ; Min. terminating impedance 1 kΩ.

Connector XLR-3; Dimensions 55 x 34 x 134 mm;

Weight 140 g.

35 e902 Dynamic Kick

Drum Microphone

Sennheiser Ultra strong metal construction; integrated stand mount; Transducer principle: dynamic; Frequency response: 20 - 18,000 Hz; Pick-up pattern: cardioid;

Sensitivity (free field, no load): 0.6 mV/Pa (at 60 Hz)

0.2 mV/Pa (at 1 kHz) Nominal impedance (at 1 kHz):

350 Ω; Min. terminating impedance: 1 kΩ; Connector:

XLR-3; Dimensions: Ø 60 mm, length 128,5 mm;

Weight: 440 g

36 Beta 58 Supercardioid

Dynamic Microphone

Shure Frequency response tailored for vocals (50 to 16,000

Hz), with brightened midrange and bass rolloff to control proximity effect. Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound. Neodymium magnet for high signal–to–noise output; Silver blue enamel-painted die cast metal with hardened matte-finished, spherical steel mesh grille. Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration. Minimally effected by varying load impedance. L: 160mm, W: 50mm at widest point on grille; Wt: 278g (9.92oz).

37 e945 Supercardioid

Dynamic Microphone

Sennheiser Shock-mounted capsule provides low sensitivity to impact and handling noise; Neodymium ferrous magnet with boron; Rugged and reliable metal construction; Transducer principle: dynamic;

Frequency response: 40 - 18,000 Hz; Pick-up pattern:

super-cardioid; Sensitivity (free field, no load): 2.0 mV/Pa ±3 dB; Nominal impedance (at 1 kHz) 350 Ω;

Min. terminating impedance 1 kΩ; Connector XLR-3;

Temperature range 0 °C to +40 °C; Dimensions ⌀ 47 x

186 mm; Weight 365g

38 C414 XLII/ST Large-diaphragm Condenser

Microphone

(MATCHED PAIR)

AKG Microphone Type: Condenser; Mono/Stereo: Stereo

Pair; Polar Pattern: Omni, Wide Cardioid, Cardioid, Hypercardioid, Figure-8; Diaphragm Size: 1"

(25.4mm); Frequency Response: 20Hz-20kHz; Max

SPL: 140dB (158dB w/18dB Pad); Output Impedance:

200 ohms; Signal to Noise Ratio: 88dB; Dynamic

Range: 134dB; min Self Noise: 6dB; Lock Mode disables all controls easily for live and installation use;

Low Cut Filter: 40Hz, 80Hz (-12dB/octave), 160Hz (-

6dB/octave); Pads: -6dB, -12dB, -18dB; Connector:

XLR; Color: Dark Grey/Gold; Weight: 0.66 lbs. (Per

Mic); Included Accessories: Shock Mounts, Windscreens, Stereo Bar, Aluminum Carry Case.

Manufacturer Part Number: 3059X00240

39 e904 Dynamic Clip On

Microphone

Sennheiser The e904 is a cardioid microphone especially suitable for use with drums and brass instruments. Metal construction. Includes drum rim clip mount.

Transducer principle: dynamic; Frequency response:

40 - 18,000 Hz; Pick-up pattern: cardioid; Sensitivity

(free field, no load) 2.0 mV/Pa; Nominal impedance

(at 1 kHz): 350 Ω; Min. terminating impedance: 1 kΩ;

Connector: XLR-3; Dimensions: Ø 41 mm, length: 63 mm; Weight: 125 g

40 e914 Small-Diaphragm

Condenser Microphone

Sennheiser Microphone Type: Condenser; Polar Pattern: Cardioid;

Diaphragm Size: 0.55" (14mm). Frequency Response:

20Hz-20kHz; Max SPL: 137dB (157dB w/Pads);

Output Impedance: 100 ohms. Self Noise: 19dB (A weighted); Pads: -10dB, -20dB; Connector: XLR;

Weight: 0.44 lbs. Included Accessories: Mic Clip, Windscreen, Microphone Pouch; Manufacturer Part

Number: 500206. Three-position bass roll-off/cut-off switch; Requires +48V phantom power; 10-year factory warranty.

MO

NIT

OR

SPE

AKE

RS

41 CHR15M 1,000-watt 15-inch Passive Monitor

Speaker

Yamaha Powered: No; Power Configuration: Bi-amped; LF

Driver Size: 15" woofer; HF Driver Size: 1.4" HF

Compression Driver; LF Driver Power Amp: 800W;

HF Driver Power Amp: 200W; Total Power: 1000W;

Frequency Range: 49Hz-20khz; Maximum Peak SPL:

125dB; Horizontal Coverage Angle: 90°; Vertical

Coverage Angle: 60°; Enclosure Material: Plywood

Mounting Options: Floor; Height: 15.9" Width: 17"

Depth: 27.2" Weight: 48.5 lbs. Manufacturer Part

Number: CHR15M.

42 CHR12M 1,000-watt 12-inch Passive Monitor

Speaker

Yamaha Type: Floor Monitor; Powered: No; Power

Configuration: 2-way; LF Driver Size: 1 x 12" Cone, 1 x 2.5" Voice Coil; HF Driver Size: 1 x 1.75"

Compression Driver; Impedance: 8 ohms; Power

Rating: 250W Continuous, 500W RMS; Total Power:

1000W Peak; Inputs: 3 x speakON; Frequency Range:

61Hz-20kHz (-10 dB); Crossover Frequency: 1.5kHz

Maximum;Peak SPL: 123dB; Horizontal Coverage

Angle: 90 Degrees; Vertical Coverage Angle: 90

Degrees; Enclosure Material: Plywood with Black

Polyurea Coating; Mounting Options: Pole, Floor

Wedge; Height: 13.5" (with rubber feet) Width: 19.75"

Depth: 18" Weight: 34.3 lbs. Manufacturer Part

Number: CHR12M-V2

43 PX10 1200W 2-channel

Power Amplifier

Yamaha Number of Channels: 2; Power Class: Class D;

Watts/Side @ 8 ohms: 1000W; Watts/Side @ 4 ohms:

1200W; Watts/Side @ 2 ohms: 700W; Inputs: 2 x

XLR, 2 x 1/4" TRS; Outputs: 2 x Neutrik speakON

NL4, 2 x Binding Post, 2 x 1/4" TS; Cooling System: 2 x 16-step variable speed fan, front to rear airflow;

DSP: EQ, Limiting, Delay, Crossover, Filters (saved via USB Type A port); Filters: Yes; Rack Spaces: 2U;

Height: 3.43" Depth: 15.25" Width: 18.87" Weight:

16.31 lbs. Manufacturer Part Number: PX10.

ACC

ESS

ORI

ES

44 ProD2 2-channel Passive

Instrument Direct Box

Radial Manufactured by Radial. Type: Full Range Passive DI with isolation transformer, 14-gauge steel welded I-beam construction, and heavy-duty baked enamel finish; Channels: 2; Pads: -15dB; Ground Lift: Yes;

Inputs: 2 x 1/4" w/ Custom audio transformer providing 100% isolation to eliminate hum and noise-causing ground loops while maintaining signal integrity; Military spec PC board with full surface ground plane; Outputs: 2 x isolated XLR, 2 x 1/4" thru;

Height: 1.88"; Width: 3.25"; Depth: 5"; Weight: 1.95 lbs. .

45 ProAV2 2-channel

Passive A/V Direct Box

Radial Manufactured by Radial. Full range A/V Direct box with custom Radial transformers to eliminate audio hum, buzz or ground loop interference. Type: Passive

DI; Channels: 2; Pads: -15dB; Ground Lift: Yes;

Inputs: 2 x 1/4" (left, right), 1 x Dual RCA Stereo, 1 x

1/8" TRS (stereo); Outputs: 2 x XLR (left, right);

Height: 1.88" Width: 3.25" Depth: 5" Weight: 1.8 lbs.

Heavy duty enamel finish, heavy duty steel construction.

46 ProDI 1-channel Passive

Instrument Direct Box

Radial Manufactured by Radial. Type: Full Range Passive DI with isolation transformer, 14-gauge steel welded I-beam construction, and heavy-duty baked enamel finish; Channels: 1; Pads: -15dB; Ground Lift: Yes;

Inputs: 1 x 1/4" w/ Custom audio transformer providing 100% isolation to eliminate hum and noise-causing ground loops while maintaining signal integrity; Military spec PC board with full surface ground plane. Outputs: 1 x isolated XLR, 1 x 1/4" thru;

Height: 1.75"; Width: 2.75"; Depth: 4.25"; Weight: 1.2 lbs.

47 Pro48 1-channel Active

48v Direct Box

Radial Manufactured by Radial. Type: Active DI with compact, rugged book-end design, 14-gauge steel welded I-beam construction, 20Hz to 100kHz

Frequency Response ; Channels: 1; Pads: -15dB;

Ground Lift: Yes; Inputs: 1 x 1/4"; Outputs: 1 x XLR, 1 x 1/4" thru; Power Source: 48V Phantom Power;

Height: 2"; Depth: 5"; Width: 3.3"; Weight: 1.55 lbs.;

48 A25D Break Resistant

Microphone Clip

Shure Works with Shure SM58, SM57, Beta 58A, 57A, 87A, 87C, or any mic with the same barrel size. Break-resistant plastic construction. Adjustable angle. Angle tension can be adjusted. threaded with brass or steel for standard mic stand attachment , 5/8" include brass or steel 3/8" Adapter.

WIRELESS

49 Shure AD4Q Four-channel Axient Digital

Wireless Receiver

Shure Configuration: 4-channel Receiver; Analog/Digital:

Digital; Receiver Type: Rackmount; Number of

Receivers: 1 Receiver; Frequency Range: 470-636

MHz; Range: 330 ft (without Quadversity enabled);

Compatibility: Axient Digital; Antenna Type:

Detachable, 4 x BNC; Front Panel Display: Yes;

Displays: High Res TFT LCD display; Frequency

Response: 20Hz-20kHz; Dynamic Range: 120dB (A weighted, XLR), 130dB (A weighted, Dante); Outputs:

2 x XLR (analog), 2 x XLR (analog/AES3), 4 x 1/4", 1 x 1/4" (headphones); Data I/O: 2 x Ethernet (Dante), 2 x Ethernet (control 1/2 POE); Word Clock: In/Out

(thru/75 ohm termination); Rack Spaces: 1U; Height:

1.73" Width: 19";

50 Shure AD2/SM58

Wireless Handheld

Microphone Transmitter

Shure Configuration: Mic with Transmitter; Compatibility:

Axient Wireless; Analog/Digital: Digital; Frequency

Range: 470-616 MHz; Form Factor: Handheld

Microphone; Type: Dynamic; Polar Pattern: Cardioid;

Mute Feature: Yes; Battery Type: 2 x AA / SB900 /

SB900A Li-ion rechargeable; Battery Life: 8 hours

(AA batteries), 11 hours (SB900A); Simultaneous

Channels: Up to 23 channels (Standard Mode), up to

63 channels (High Density Mode); System: Operating

Range: 300 ft.; Line-of-sight Frequency Response:

50Hz-15kHz; Microphone Color: Black;

51 Shure UA874 Active

Directional Antenna

(470-698 MHz)

Shure Type: Active Directional Antenna; Frequency Range:

470-698 MHz; Connectivity: BNC Male; Paddle shape; Mountable to standard mic stand threads;

52 Shure PA725 BNC

Coaxial Cable - 10 foot

Shure Type: Antenna Cable; Connector 1: BNC; Connector

2: BNC Length: 10'

53 Shure SB900B

Rechargeable Lithium-ion Battery Pack

Shure Made for Shure Axient Digital, ULX-D, QLX-D

Wireless, PSM 1000, PSM 900, and PSM 300 personal monitoring products, the SB900B rechargeable lithium-ion battery provides up to *12 hours of continuous use. Metering feature to see how much charge remains in minutes and in seconds. The successor to the SB900A, the SB900B now features a function that automatically switches the battery off when it reaches an internal temperature of 140°F.

54 Shure SBC200 Dual

Docking Recharging

Station Expansion

Shure Works with Shure QLX-D, ULX-D, Axient Digital

(AD series), PSM300 (P3RA), PSM900 (P9RA), and

PSM1000 (P10R) series wireless products; Charges

Shure SB900 lithium-ion rechargeable batteries (sold separately); 50% charge within 1 hour; full charge within 3 hours; Batteries can be charged by themselves or while installed in belt packs or handheld transmitters; Does not include a power supply (use with Shure SBC200US); Multiple charging units conveniently lock together.

55 Shure SBC200-US Dual

Docking Recharging

Station with Power

Supply

Shure Works with Shure QLX-D, ULX-D, Axient Digital

(AD series), PSM300 (P3RA), PSM900 (P9RA), and

PSM1000 (P10R) digital wireless systems; Charges

Shure SB900 lithium-ion rechargeable batteries (sold separately); 50% charge within one hour; full charge within three hours; Batteries can be charged by themselves, or while installed in beltpacks or handheld transmitters; Add up to three SBC200 chargers

(without power supplies) to charge up to eight batteries at once; Multiple charging units conveniently lock together; EA

56 ATW-3255 In-ear

Monitor System

Audio

Technica Frequency Range: 470.125-607.875 MHz;

Stereo/Mono: Stereo/Mono; Included Transmitter:

ATW-T3205 Included; Receiver: ATW-R3250

Included; Earphones: ATH-E40; Number of

Frequencies: 49; Operating Range: 300 ft. Line-of-sight; Earphone Type: In-ear Earphone; Freq

Response: 20Hz-19kHz; Earphone Cable Length: 5.2';

Transmitter Inputs: 2 x XLR; Transmitter Outputs: 2 x

1/4" TRS; Transmitter Power: 12V DC power supply

(Included); Transmitter Dimensions: 8.3" x 7.5" x 1.7";

Receiver Output Jack: 1 x 1/8"; Receiver Power: 2 x

AA batteries; Receiver Dimensions: 3.2" x 2.5" x

0.91"; Receiver Weight: 3.6 oz; Manufacturer Part

Number: ATW-3255DF2; 3000 Link mode for use with other 3000 Series Wireless items; Channel plan option for configuring all network-connected transmitters via an RF scan from a single receiver;

Wireless Manager-ready for remote monitor and control; Able to scan wireless environment for open frequencies without software assistance.

57 COMBINE4 4-channel

Antenna Combiner

RF Venue Combine up to 4 in-ear monitor transmitters to a single antenna; Rear-mounted antenna connector; Provides

DC power for up to 4 IEM transmitters; Minimizes intermodulation between multiple adjacent transmitters; Works with any brand of IEM system.

Type: In-ear Transmitter Combiner; Compatibility: In-ear Monitor Systems; Connectivity: 4 x BNC (RF input), 1 x BNC (antenna out), 4 x 12V DC (power out); Manufacturer Part Number:COMBINE4

58 COMBINE8 8-channel

Antenna Combiner

RF Venue Combine up to 8 in-ear monitor transmitters to a single antenna; Rear-mounted antenna connector accommodates any type of directional antenna;

Provides DC power for up to 8 IEM transmitters;

Minimizes intermodulation between multiple adjacent transmitters; Works with any brand of IEM system; RF interconnects to 8 IEM transmitters are included;

Includes RGBX BNC jumpers, AC power cable, and

DC Octopus 8-connector power distribution cable;

Type: IEM Transmitter Combiner; Channels: 8;

Frequency Range: 470-608 MHz; Connectivity: 9 x

BNC (8 RF inputs, 1 antenna output), 1 x DC Port

(12V/4A); Rackmountable: Yes, 1U; Dimensions:

18.89" x 1.77" x 10.23"

59 CP Beam Antenna2ea RF Venue High-gain folding antenna for wireless microphones and in-ear monitors; Compact design can fit neatly in a

2U rack drawer. Type: Folding Helical Antenna;

Compatibility: UHF Wireless Systems; Frequency

Range: 470-698 Mhz; Connectivity: Type N RF connector (BNC adapter included); Mounting Options:

Thread Mounts: 1/4"-20, 3/8"-16, 5/8"-27;

Dimensions: 13.9" x 13.9"

60 TP Link EAP650-

Outdoor AX3000

Wireless Dual-Band

Outdoor Access Point

TP-Link Wi-Fi 6 (802.11ax); Up to 2976 Mb/s Throughput; 2.4

GHz / 5 GHz (Dual Band); 1 x PoE+ Compliant

Gigabit Ethernet Port; IP67 Rated; Works with Omada

Mesh

61 TP Link Dual Band

AX3000Wi-Fi 6 Router

Archer AX55

TP-Link Wi-Fi 6 (802.11ax); Up to 2976 Mb/s Throughput; 2.4

GHz / 5 GHz (Dual Band); 1 x PoE+ Compliant

Gigabit Ethernet Port; IP67 Rated; Works with Omada

Mesh

62 eneloop Pro

Rechargeable AA

Batteries 8 pack

Panasonic

MINIMUM 2000mAh. Holds 70% charge up to 10 years. Low temp rating: -4 F. Chemistry: LSD Ni-MH.

Rechargeable. Recyclable. Voltage: 1.2v

63 Ansmann Rackmount

Drawer with 3 Powerline

8 Battery Chargers

Ansmann For IEM packs. Rackmount drawer with 24 channels of AA/AAA charging. Includes a power supply and 3

PL8 battery chargers. Preassembled for plug and play.

Manual discharge function ensures longer battery life.

Charges AA and AAA batteries in less than 4 hours.

64 Shure SE215-CL Sound-isolating Earphones -

Clear, Shure Type: Wired; Connectivity: 1/8" plug; Over-the-ear configuration; Fit Style: In-ear; Drivers: Single

Dynamic Micro-driver; Noise Attenuation: Up to

37dB, Passive; Sound Isolating Impedance: 17 ohms;

Frequency Range: 22Hz-17.5kHz; Sensitivity: 107dB

SPL @ 1mW; Detachable Kevlar Reinforced Cable:

Yes; Cable Length: 64" Color: Clear Case/Bag: Soft

Case Weight: 1.00 oz.; 2-year limited warranty.

Manufacturer Part Number: SE215-CL

65 EAYLF1 Replacement

Yellow Foam Earphone

Sleeves (50 pairs)

Shure For IEM earphones. These reusable, disposable foam sleeves for Shure earphones compress to fit in the ear.

Once in the ear, the foam expands to form a tight yet comfortable seal that protects from unwanted outside noise. These are yellow and the package contains 50 pairs. Works with: E1, E3, E4, E5SCL3, SCL4, SCL5, SE110, SE210, SE310, SE420, SE530, SE115, SE215, SE315, SE425, SE535

MISCELLANEOUS

66 MIC Stand-25950 Extra

Low Profile Tripod Base

Boom Mic Stand

K&M Manufactured by K&M. One-piece pole with cast iron base. Complete with boom. Matte black finish. Ht: 11 in Boom length: 16 to 28.5 in. adjustable Net weight:

6.2 lbs.

67 Power-Radial Power-2

Power Conditioner

Radial All metal, 1U chasis; slide-out tray with multicolor

LED illumination; High-rejection RF interference filter mitigates high-frequency noise and removes AM radio signals. Filtering: RFI filtration; Rack-mountable: Yes;

Power Source: Fixed AC cable; Display: LED protection indicator; Lights: Pull-out dimmable multicolor LED lamp; Number of Outlets: 1 IEC & 1

USB x Front, 8 IEC x Rear IEC POWER PORTS:

Voltage Rating:120V, 50/60Hz; Load Rating: 15A total, 15A per outlet. USB POWER PORT: Voltage

Rating:.5V; Load Rating: 1A. GENERAL: Overload

Protection: American-made Metal Oxide Varistor

(MOV), 15A circuit breaker; Dimensions (L x W x

H):.19” x 10.05” x 1.47” (482.6mm x 255.25mm x

37.4mm) Temperature Range: 5°C to 40°C; Agency

Listings: Conforms to UL Std 1419, 62368-1 in USA, CSA Std C22.2 No. 62368-1 in Canada

68 Digital Mixer-dLive

DM64 UFX MixRack

64-input Digital Stage

Box

Allen &

Heath Must be paired with dlive control surface or equivalent compatible control surface procured through this contract. 64-in/32-out digital MixRack with 16 stereo effects returns; XCVI Core delivers unprecedented performance; DEEP technology provides a vast assortment of effects; Variable bit depth yields excellent precision and noise performance; 96-bit accumulator offers incredible headroom; Class-leading, ultra-low 0.7ms of latency;

Fader-free mixing capability from your laptop or touch tablet; Dual redundant Surface links and DX links;

Dual redundant hot-swappable power supply capability; 3 x 128-channel option I/O slots support

Dante, Waves SG, ACE, and MADI; ME-1 port for connecting a personal monitoring system; Overhauled

Cue List system simplifies cue list creation;

Timesaving Actions feature makes complex automation a breeze; Channel Library has been extended to include Mix contributions; Preinstalled

RackUltra FX card adds 8 extra FX engines to your setup without consuming any inputs, buses, or FX slots.

69 Digital Mixer Control-dLive C3500 Control

Surface for MixRack

Allen &

Heath Must be paired with dlive mixrack input box, or equivalent compatible rack mountable mixer/stagebox procured through this contract.

Type: dLive Control Surface Channels: 24 faders with six layers of mixing; Inputs - Mic Preamps: 6 x XLR

(mic/line); Phantom Power: 6 channels; Inputs -

Digital: 1 x XLR (AES/EBU); Outputs - Digital: 1 x

XLR (AES/EBU); Busses/Groups: 6 x XLR (line out);

Data I/O: RJ45 (DX5 link), RJ45 (GigaACE link), 2 x

Network ports; Headphones: 1 x 1/4", 1 x 1/8"; USB: 2 x Type A; Computer Connectivity: USB (2 x 2); I/O

Expansion Slots: 1 x Expansion slot (iLive/GLD option cards); Word Clock: 1 x BNC In/Out; Faders:

24; EQ Bands: 4-band parametric, graphic EQ; Effects:

16 RackExtra FX; Features: Dual Touch screens feature pinch, swipe, drag'n drop gestures, 19 assignable soft keys, video out; Screen: 2 x 12" touchscreens; Height: 12.8" Depth: 26.2" Width: 34.8"

Weight: 61.7 lbs.

70 Mic Stand-2109

Telescoping Boom

Microphone Stand

K&M Manufactured by K&M. All steel construction with zinc die-cast base; Topline quality level; Boom arm clamping: t-bar locking screw; Color: Matte Black;

Height: adjustable - 35" to 63".; Boom length:

adjustable from 17.13 to 29.33"; Net weight: 6.85 lbs.

71 Mic Stand259- Low

Tripod Mic Stand - Black

K&M Manufactured by K&M. Steel construction w/ zinc die-cast base; 2-piece boom arm; folding tripod legs; black powdercoat finish; Height (low to high): 16.7"-25.4";

Boom length: 18.5"-30.5"; Weight: 4.85 lbs

72 Main Speakers- LINA

Compact Line Array and

750-LFC Subwoofer

System

Meyer

Sound Made by Myer Sound. 8 LINA loudspeakers; 4 750-

LFC Subwoofers; 2 750-LFC caster frame kits enabling transportation and stacking of up to 5 LINA units Powered: Yes; Power Configuration: Tri-amped

(LINA), Single Amp (750LFC); LF Driver Size: 2 x

6.5" Long-excursion Cone driver (LINA), 1 x 15"

(750LFC); HF Driver Size: 3" Compression driver

(LINA); Total Power: 1950W Class D (LINA), 3100W

Class D (750LFC); Inputs: 1 x XLR (LINA), 1 x XLR

(750LFC); Outputs: 1 x XLR (LINA), 1 x XLR

(750LFC); Frequency Range: 65Hz-18khz (LINA), 35Hz-125Hz (750LFC); Frequency Response: 37Hz-

110Hz (±4 dB) (750LFC); Maximum Peak SPL: 138 dB SPL (LINA), 130.5dB SPL (750LFC); Horizontal

Coverage Angle: 100° (LINA); Enclosure Material:

Multi-ply Birch with Textured Black finish; Mounting

Options: Stacked, Fly; Power Source: powerCON in/out Height: 8.38" (LINA), 20.43" (750LFC); Width:

20.27" (LINA), 18.55" (750LFC); Depth: 15.32"

(LINA), 20.88" (750LFC); Weight: 43 lbs. (LINA), 89 lbs. (750LFC);

73 Speaker Cases- Road

Case for 15" Monitors (2 EA) Road cases to fit (2 EA) speakers with dimensions: 15.9" x 17" x 27.2" drop-in or "case-over" designs acceptable. drop-in case must have fully hinged lid. Tough 3/8" plywood and ABS laminate panels; Recessed butterfly latches and padded flip handles; Large steel ball corners; 4" swivel casters;

Foam lined; Chrome plated hardware. Must fit 15” monitor speakers procured through this contract.

74 Speaker Cases- Road

Case for 12" Monitors (2 EA) Road cases to fit (2 EA) speakers with dimensions: 13.5" x 19.75" x 18" drop-in or "case-over" designs acceptable. drop-in case must have fully hinged lid Tough 3/8" plywood and ABS laminate panels; Recessed butterfly latches and padded flip handles; Large steel ball corners; 4" swivel casters;

Foam lined; Chrome plated hardware. Must fit 12” monitor speakers procured through this contract.

75 Shipping 1

Total Quote CLIN I: 133rd Army Band Sound System Reset hyejin.lee Highlight hyejin.lee Highlight