Questions and Answers.pdf
PDF 186 KB Posted
- Attached to
- Waterjet Cutting System
- Solicitation number
- FY25-12308753
- Issued by
-
Department of the Army National Guard
About this file
The document is a Questions and Answers (Q&A) file for Solicitation FY25-12308753 for a Waterjet Cutting System procurement by the Washington Army National Guard. The Q&A addresses four key vendor inquiries: (1) equipment footprint size flexibility (within 10% of 7.2' x 7.6'), (2) cutting pressure requirements (confirmed at 60,000 PSI continuous output from the intensifier pump), (3) confirmation that splash containment guards are mandatory, and (4) a response that the project budget cannot be disclosed. This document provides clarifying details for potential vendors preparing quotes for the solicitation, which is set aside for small businesses and due by Friday, 01 August 2025 at 3:00 P.M. Eastern time.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Questions and Answers Solicitation: FY25-12308753
Requirement: Waterjet Cutting System
Q1: The specifications call for a max footprint of: 7.2’ x 7.6’. Is the requirement absolute, or can it be slightly larger?
A1: Size must be within 10% of the 7.2’ X 7.6’ due to placement location
Q2: What is the max cutting pressure requirement? 60K PSI or 90 PSI?
A2: The Water Jet Appliance must have 60,000 PSI continuous output from the intensifier Pump.
Q3: Are the splash containment guards a must-have?
A3: Yes
Q4: What is the budget for this project?
A4: The budget for this project cannot be disclosed.
File details come from the government source that posted it. Updated .