FY22-32524_SOW_06282022.pdf

STATEMENT OF WORK

1.0 Scope: This task is to manufacture the material listed below required to build and deliver MK-683 integrated test suite units.

1. 7571534-1, Guide Rail, Bracket, QTY: 100

2. 7571638-2, Stop Load Tray -2, QTY: 60

3. 7579004, Touchscreen Enclosure, QTY: 15

2.0 Applicable Documents

2.1 Department of Defense drawing:

Source Control Drawing No. 7571534-1 - Manufacturing drawing.

Source Control Drawing No. 7571638-2 - Manufacturing drawing.

Source Control Drawing No. 7579004- Multiple Manufacturing drawings.

2.2 Government Standards:

MIL-STD-100, establishes the essential requirements and reference documents applicable to the preparation and revision of engineering drawings and associated lists for or by Departments and Agencies of the Department of Defense.

MIL-STD-130, Department of Defense standard practice: identification marking of US military property

MIL-A-8625, Intended to improve surface corrosion protection under severe service conditions or as a base for paint systems.

2.3 Non-Government Standards:

3.0 Requirements

Manufactured Parts must be within specified tolerance, which is stated in the manufacturing drawings for each part. Parts found not within tolerance are classified as faulty and are not acceptable to the Government.

3.1 General:

NSWC PHD has a requirement for manufactured parts(material listed above). These parts will specifically be used to assemble a full Mark-683 integrated test suite used for Vertical Launch System testing. This is an in-house design, wholly developed and owned by NAVSEA.

3.2 Work:

We require vendor to properly fabricate, inspect, and manufacture per the technical data package provided. The workmanship shall conform to standards as listed in the manufacturing drawings.

(POC: Ivan Garcia, ivan.garcia5@navy.mil) for any questions that the Vendor may have regarding the parts.

3.3 Place of Performance:

Work to be wholly completed within the United States.

3.4 Period of Performance:

25 weeks ARO

3.5 Government Furnished Material:

Manufacturing files will be provided in the form of technical drawings. Vendor will reference these for manufacturing information. No hardware will be provided.

3.6 Point of Delivery:

Ivan Garcia, NSWC PHD, Code L44 4363 Missile Way, Building 435, Receiving Dept.

Port Hueneme, CA 93043-4307

3.7 Technical Point of Contact/Requirement Generator:

Ivan Garcia, ivan.garcia62.civ@us.navy.mil, (805) 228-8106

3.8 Contracting Officer:

Myriam Padua-Preissler, myriam.padua-preissler.civ@us.navy.mil (805) 228-6112