FY21-22704 22718 22719 Salient Characteristics.pdf
PDF 125 KB Posted
- Solicitation number
- N6339421Q0093
About this file
This document outlines technical requirements for maintenance consoles to be procured through a sole source contract. The Navy seeks three units that support screen resolutions up to 1280x1024 at 60Hz, have a minimum 17-inch diagonal display, full keyboard, and trackball or trackpad pointing device. The consoles must operate between 5-50 degrees Celsius, withstand storage temperatures from 20-55 degrees, and operate in 5-95% non-condensing humidity. Additionally, the units must withstand shock and vibration levels outlined in MIL-S-901E and MIL-STD-1671 when installed in a shock isolated enclosure and continue normal operation during ship motion and attitude testing per MIL-HDBK-2036. The sole source requirement is for Systel Incorporated to provide the maintenance consoles under solicitation number N6339421Q0093 for the Department of the Navy Naval Sea Systems Command.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FY21-22704 22718 22719 Drawings.pdf | ||
| FY21-22704 22718 22719 Solicitation.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics for Maintenance Consoles 06/04/2021
APPLICABLE DOCUMENTS.
1. The following documents form a part of this drawing to the extent specified herein.
a. MIL‐STD‐167‐1 Mechanical Vibrations of Shipboard Equipment, 01 May 1974
b. MIL‐S‐901 Shock Test, H.I. (Hi‐Impact) Shipboard Machinery, Equipment and Systems, Requirements for
Revision E, 20 June 2017
c. MIL‐HDBK‐2036, Preparation of Electronic Equipment Specifications, 3 September 1999
REQUIREMENTS.
1. Performance Characteristics. The unit shall have the following performance characteristics.
a. Supported Resolution. The unit’s monitor shall support a resolution of 1280 x 1024 and 640 x 480 at 60‐75 Hz.
b. Display. The unit shall have a minimum screen display of 17 inches measured diagonally with an aspect ratio of 5:4.
c. The unit shall have a full QWERTY keyboard.
d. The unit shall have a Trackball or trackpad pointing device.
e. Input power.
f. The unit shall accept single phase 115Vac, 60 Hz input.
g. The unit shall have a maximum power of 40W.
2. Physical Characteristics. The unit shall have the following physical characteristics.
a. Dimensions. The unit dimensions shall be as shown on sheet 3.
b Weight. The unit weight shall not exceed 20 lbs.
c. Connectors.
d. The unit shall have both DVI and VGA connections.
e. The unit shall have USB type A connectors for Keyboard and pointing device.
3. Environmental Conditions.
a. Operating Temperature. The unit operates between temperatures of 5 and 50°C.
b. Storage Temperature. The unit shall withstand exposure to temperatures between ‐20 and
55°C without damage or degradation.
c. Humidity. The unit shall operate in a relative humidity of 5 to 95% non‐condensing.
d. Shock. The unit shall be capable of operating when exposed to the shock requirements of
MIL‐S‐901E (Grade A) when installed within a shock isolated enclosure.
e. Vibration. The unit shall be capable of operating when exposed to the vibration requirements of
MIL‐STD‐167‐1 when installed within a shock isolated enclosure.
f. Ship motion and attitude. The unit shall operate normally (with monitor in upright position) while exposed to conditions of motion and attitude testing in accordance with MIL‐HDBK‐2036.
4. Quality Assurance Provisions.
a. Acceptance Tests and Inspections. Best commercial practice shall be used. Unit must pass all tests and
Inspections before delivery.
File details come from the government source that posted it. Updated .