FULL DRESS HAT INSIGNIA PD.pdf
PDF 204 KB Posted
- Attached to
- Full Dress Hat Insignia FY23
- Solicitation number
- W911SD23R0021
About this file
This document contains a sources sought notice and technical specification for military insignia products. The Department of the Army Materiel Command Mission and Installation Contracting Command is seeking sources for approximately 1160 Full Dress Hat Insignias and 2600 Dress Hat Insignias to be produced per MIL-DTL-1563/1B. Interested sources are requested to provide company information, interest as a prime or subcontractor, relevant past performance history, pricing and delivery details for the insignia products, and any recommendations to improve competition by small businesses by November 11, 2022 to Sonya Van Valkenburg at the specified email address. The requirement is set aside for small businesses provided two or more are capable of meeting the technical and delivery requirements.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Enlarged Photo of Insignia.docx | DOCX document | |
| DRESS CAP INSIGNIA PD.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AMSC N/A Page 1 of 2 FSC 8455
INCH-POUND
MIL-DTL-1563/1B
6 January 2014
SUPERSEDING
MIL-DTL-1563/1A
30 April 1997
DETAIL SPECIFICATION SHEET
INSIGNIA, U.S.M.A., SERVICE HAT, CADET FULL DRESS WITH POM POM
This specification is approved for use by all Departments and Agencies of the Department of Defense
The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-B-1563.
MATERIAL: Red Brass 85/15 (UNS Alloy No. C-230)
FINISH: Highly Polished. Lacquer Front and Edge
MARKING FOR IDENTIFICATION: Back of Insignia
SUGGESTED PACKIGING: Standard Commercial UNIT PACKAGING: Individual mounted on card and wrapped.
INTERMEDIATE PACKAGING: 25 item per box.
Source: https://assist.dla.mil -- Downloaded: 2017-10-11T20:00Z Check the source to verify that this is the current version before use.
MIL-DTL-1563/1B
ATTACHING DEVICE AND PIERCING:
1. Piercing shall be as indicated.
2. Attaching device shall be two screw posts and thumb nuts located as shown.
NOTE:
The term (REF) refers to the measurements taken from the Government furnished hub or die.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
Custodian: Preparing activity:
Army - IH Army – IH
Review activity: (Project No. 8455-2014-001)
DLA - CT
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.dla.mil.
Source: https://assist.dla.mil -- Downloaded: 2017-10-11T20:00Z Check the source to verify that this is the current version before use.
https://assist.dla.mil/
File details come from the government source that posted it. Updated .