Fuel Cell Enclosure Technical Specs.pdf
PDF 92 KB Posted
- Attached to
- Solid Oxide Fuel Cell Outside Enclosure
- Solicitation number
- 12760425Q0138
- Issued by
-
Department of Agriculture Forest Service
About this file
This document is a Minimum Technical Specifications sheet for a United States Forest Service (USFS) Land Mobile Radio project, specifically detailing requirements for an outdoor aluminum enclosure for a Solid Oxide Fuel Cell. The specifications call for an enclosure designed to accommodate an Adaptive Energy P-250i Solid Oxide Fuel Cell and two 20-lb propane cylinders, with specific dimensional and structural requirements.
Key technical specifications include an aluminum enclosure thicker than 0.085 inches, with separate compartments for the fuel cell and propane cylinders. The enclosure must feature lockable door latches, door and wall vents with louvers/weather hoods, internal vent filter provisions, mounting brackets for equipment, integrated aluminum lifting lugs rated for lifting the entire assembly, weather-sealed power ingress points, and foundational mounting points. The design emphasizes durability, ventilation, security, and adaptable installation options for outdoor environments.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| USDA Security Contract Language.pdf | ||
| VPAT2.5508_November2023_.pdf | ||
| RFQ_12760425Q0138 v2.pdf | ||
| Bill of Materials.xlsx | XLSX spreadsheet | |
| Accessibility Requirements Language-Power Systems.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
USFS Land Mobile Radio
Minimum Technical Specifications Solid Oxide Fuel Cell Outside Enclosure
Outdoor aluminum enclosure to accommodate an Adaptive Energy P-250i Solid Oxide Fuel Cell and two 20-lb propane cylinders, with the following minimum specifications:
• Dimensions o Sufficient to accommodate specified fuel cell and propane cylinders in two separate compartments o Walls, door(s) and roof: thicker than 0.085 aluminum
• Features o One or more door vents o Lockable door latch o One or more wall vents for propane and fuel cell compartments o Louvers and/or weather hoods for vents o Provisioned for internal vent filters o Brackets for mounting Fuel Cell and propane cylinders o Aluminum lifting lugs integrated into enclosure, rated to handle lifting and suspending the enclosure, generator and two fuel cylinders o Weather sealed ingress point(s) for power wiring o Mounting points for enclosure foundational supports, such as cement pads, elevated piers, or other
File details come from the government source that posted it. Updated .