Fuel_bladder_specs_.docx
DOCX document 16 KB Posted
- Attached to
- AFS FUEL BLADDERS
- Solicitation number
- 140L0226Q0007
About this file
This file contains technical specifications for fuel bladders required under solicitation 140L0226Q0007 issued by the Department of the Interior Bureau of Land Management Alaska Region.
The specification details requirements for collapsible fuel bladders available in three capacity options: 500, 1,000, and 2,000 gallons. Bladders must be ISO 9001:2015 certified and constructed from 30 mil military specification Grade "A" fuel fabric with urethane coating, providing weather and UV degradation resistance. Key structural features include carry handles on both long sides, 3-inch overlapping welds, and reinforced corners at 180 mil thickness. The bladders must include two 2-inch capped camlock fittings for fill and discharge operations, one 2-inch capped camlock vent fitting with a vented spark arrestor, and all fittings must be positioned through 60 mil reinforcement patches with 90 mil abrasion protective patches on interior and exterior surfaces. Each bladder shall be supplied with a military-style emergency repair kit with clamps, operation manual, and warranty coverage. The collapsible design facilitates storage and transport requirements.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_140L0226Q0007.pdf | ||
| B01_Combined_Synopsis_and_Solicitation_corrected.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FUEL BLADDER SPECIFICATIONS
500, 1,000, 2,000 Gallon Capacity
· ISO 9001:2015 Certified.
· Provide carry handles for ease of moving the bladder, on two sides (the long sides) minimum.
· Collapsible for ease of storage and transport.
· Constructed of 30 mil. Mil spec Grade “A” fuel Fabric (Urethane).
· Weather resistant, UV degradation resistant.
· 3” overlaps weld.
· 2- 2” Capped off Camlock for fill/discharge.
· 1- 2” Capped off Camlock for vent.
· 1 Vented Spark arrestor.
· All fittings should be placed through 60 Mil reinforcement patches.
· Opposite all fittings are 90 mil abrasion patches to protect tank inside and out.
· 180 Mil reinforced corner.
· Tanks will include military style emergency repair kit with clamps.
· Operation manual.
· Warranty.
File details come from the government source that posted it. Updated .