Attach_JA1.6_Section_01_42_00.pdf

Attachment JA-1.6 Solicitation Number FA5004-15-B-C006

REPAIR CH&PP COAL CAR SHAKER SECTION 01 42 00

EIELSON AFB, ALASKA EXPLANATIONS: DRAWINGS

PROJECT NO.: FTQW 11-1005 AND SPECIFICATIONS

Design Alaska, Inc. 01 42 00 - 1

PART 1 GENERAL

1.1 REQUIREMENTS INCLUDED

A. Explanation of terminology used within the Drawings and Specifications.

1.2 SPECIFICATION FORMAT AND COMPOSITION

A. Specifications are divided into Divisions and Sections for the convenience of writing and using.

Titles are not intended to imply a particular meaning or to fully describe the Work of each Division or Section, and are not an integral part of the text that specifies the requirements.

Contracting Officer is not bound to define the limits of any subcontract, and will not enter into disputes between the Contractor and his employees, including subcontractors.

B. Pages are numbered independently for each Section. Section number is shown with the page number at the bottom of each page. "End of Section" is noted on the last page of each Section. It is Contractor's responsibility to verify that Contract Documents received for bidding and construction are complete in accordance with Table of Contents.

C. These Specifications are of the abbreviated, or "streamlined" type, and include incomplete sentences.

D. Omissions of words or phrases such as "the Contractor shall," "in conformity therewith," "shall be," "as noted on the Drawings," "according to the Drawings," "a," "an," "the" and "all" are intentional.

E. Omitted words or phrases shall be supplied by inference in the same manner as they are when a "note" occurs on the Drawings.

1.3 DRAWINGS: CONTENT EXPLANATION

A. Where on any of the Drawings, a portion of the Work is drawn out and the remainder is indicated in outline, the parts drawn out shall apply also to all other portions of the Work.

B. Wherever a detail is referenced and developed for a specific condition, same or similar detail shall apply to identical or similar conditions elsewhere on Project even though not specifically referenced.

C. Where the word "similar" occurs on the Drawings, it shall be interpreted in its general sense and not as meaning identical, all details shall be worked out in relation to their location and their connection with other parts of the Work.

D. The figured dimensions on the Drawings or notes indicating dimensions shall be used instead of measurements of the Drawings by scale. No scale measurements shall be used as a dimension.

REPAIR CH&PP COAL CAR SHAKER SECTION 01 42 00

EIELSON AFB, ALASKA EXPLANATIONS: DRAWINGS

PROJECT NO.: FTQW 11-1005 AND SPECIFICATIONS

Design Alaska, Inc. 01 42 00 - 2

E. Provide piping, ductwork, equipment, and accessories indicated on the Drawings unless it is specifically indicated that the piping, ductwork, equipment, or accessory is existing.

F. Unless otherwise indicated, abbreviations and symbols used in the Drawings and Specifications are intended to have the meaning commonly accepted in the construction industry. Contact the Contracting Officer for definition if any question arises concerning them.

G. Certain items used generally throughout the Specifications and Drawings are used as follows:

1. Indicated: The term "indicated" is a cross reference to details, notes or schedules on the Drawings, other paragraphs or schedules in the Specifications, and similar means of recording requirements in the Contract Documents. Where terms such as "shown", "noted", "schedules", and "specified" are used in lieu of "indicate", it is for the purpose of helping the reader accomplish the cross reference, and no limitation of location is intended except as specifically noted.

2. Installer: The person or entity engaged by Contractor, his subcontractor or sub-subcontractor for the performance of a particular unit of work at the Project site, including installation, erection, application, and similar required operations. It is a general requirement that installers be recognized experts in the Work they are engaged to perform.

3. Provide: Except to the extent further defined, the term "provide" means to supply and install, complete and ready for the intended use.

4. Furnish: Except as otherwise defined in greater detail, the term "furnish" is used to mean the same as "provide".

5. Guarantee and Warranty: "Warranty" is generally used in conjunction with products manufactured or fabricated away from the Project site, and "guarantee" is generally used in conjunction with units of work, which require both products and substantial amounts of labor at the Project site. The resulting difference is that warranties are frequently issued by manufacturers, and guarantees are generally issued by Contractor and frequently supported (partially) by product warranties from manufacturers.

6. Work: Work is the act of, and the result of, performing services, furnishing labor, furnishing and incorporating materials and equipment into the Project and performing other duties and obligations, all as required by the Contract Documents. Such Work, however incremental, shall culminate in the entire completed Project, or the various separately identifiable parts thereof.

7. Contracting Officer: Contracting Officer means Contracting Officer or Contracting Officer’s Representative.

1.4 CONFLICTS

A. Report any conflicts to Contracting Officer for clarification.

REPAIR CH&PP COAL CAR SHAKER SECTION 01 42 00

EIELSON AFB, ALASKA EXPLANATIONS: DRAWINGS

PROJECT NO.: FTQW 11-1005 AND SPECIFICATIONS

Design Alaska, Inc. 01 42 00 - 3

PART 2 PRODUCTS (NOT USED)

PART 3 EXECUTION (NOT USED)

END OF SECTION