Front Fusible Sources Sought.pdf
PDF 155 KB Posted
- Attached to
- Front Fusible
- Solicitation number
- SPE1C1RFRONTFUSIBLE
About this file
This document is a Sources Sought notice from the Defense Logistics Agency (DLA) Troop Support Clothing and Textiles for manufacturers that can produce the material for the Front Fusible (T3G) on dress coats. The key details are:
The specifications for the Front Fusible material are provided, including the required composition, weight, width, colors, and fusing conditions. All materials must be Berry Amendment compliant, meaning they must be of domestic origin. DLA is seeking interested vendors to produce this material and is requesting responses by December 2, 2024 at 3:00 PM local time. Interested parties should contact the specified DLA representatives with any questions.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| MIL-C-44296A Cloth Fusibles.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sources Sought Defense Logistics Agency
DLA Troop Support is seeking sources sought for manufacturers that can produce the material for the Front Fusible (T3G) on dress coats. The specifications for these materials are listed below:
Specifications: MIL-C-44296A
The specification documents can be viewed at the following website: https://assist.daps.dla.mil/quicksearch/
Quality: T3G Width: 65 ¾” Colors: Black APPLICATION: Government Uniforms (Army/Navy/Airforce)
Menswear:
Fusible Front Fusible Reinforcement
CLEANING: Dry-Cleaning
COMPOSITION WEIGHT IN G/M2
BASE Viscose: 86% Polyester: 14%
WARP Polyester: 100% WEFT Viscose: 100%
COATING Polyamide MESH: 17 17
TOTAL 108
FUSING CONDITIONS
Flat bed press Continuous press
ACTUAL TEMPERATURE 140/150 degrees C 140/150 degree C GLUELINE 127 degrees C 127 degrees C PRESSURE 350/500 g/cm2 3 / 4 Bar
TIME 12 / 14 s 12 / 14 s
All items must be Berry Amendment Compliant. In accordance with "Section 833 of the National Defense Authorization Act for Fiscal Year 2006 Act added language to 10 U.S.C. 2533a requiring that all articles or items of "clothing", including the materials and components thereof, purchased by the Department of Defense be grown, reprocessed, reused, or produced in the United States, other than sensors, electronics, or other items added to, and not normally associated with, clothing (and the materials and components thereof)." Therefore, all components must be of domestic origin in compliance with DFARS clause 252.225-7012, Preference for Certain Domestic Commodities (April 2022).
https://assist.daps.dla.mil/quicksearch/
Sources Sought Defense Logistics Agency
In an effort to ascertain interest, the Government is seeking interested vendors to produce the subject material. Response date is on or before December 2, 2024 at 3:00PM Local Time.
If you are interested or have any questions, please send an e-mail to Fredrick.Robinson@dla.mil and Isaiah.R.Murray@dla.mil.
mailto:Coraliz.Feliciano@dla.mil mailto:Anthony.Davella@dla.mil
File details come from the government source that posted it. Updated .