Soil_Screen_Requirements.docx
DOCX document 17 KB Posted
- Attached to
- Portable Soil Screener Federal contract opportunity
- Solicitation number
- FortDrumRangeControlSAL0012
- Issued by
- Department of the Army
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Soil Screen Minimum Requirements
· Towable with 1 ton pick-up truck.
· Pintle / Lunette ring type hitch equipped.
· Street legal towable in all respects, to include all required 12 volt lighting, break-away controller and safety chains.
· Minimum 15 inch 8 ply tires.
· Removable mud flaps.
· Frame to be of structural tube steel construction.
· The plant must be finished with a thermal set TGIC polyester powder coat finish.
· Minimum 10HP air cooled Diesel engine.
· Vibratory unit must be of non-hydraulic design.
· Electric start, 12 volt system.
· The wiring of unit is to be sealed wiring harness to minimize failure.
· Hour meter.
· Engine must be equipped with automatic mechanism for both high temperature and low oil engine shut down.
· Dual-stage air filter with pre-cleaner.
· Lockable engine and control compartments.
· Full set of manuals to include Operator, Parts and Service.
· Capable of producing screened material not to exceed ½ inch in diameter.
· Capable of changing size of product produced.
· Removable / replaceable screens.
· Double decked screen box.
· Feed hopper not to exceed 8.5 feet in height.
· Feed hopper must accommodate a bucket width of 7.5 feet minimum.
· Feed hopper must have a minimum capacity to accommodate a loaders with a ½ to 1.75 cubic yard bucket during hopper loading.
· Discharge chamber for screened product must accommodate a bucket with of 94 inches minimum.
· The screen box shall be a minimum of (six) 6” wide and (five) 5” long and be driven mechanically without the use of hydraulics.
· The screening plant must come equipped with a 1-1/2” x 1-1/2” woven top deck and a ½” x ½” woven bottom screen.
· An additional woven screen with 2-1/2” x 2-1/2” openings to be shipped with the screening plant.
· The screening plant must be capable of interchanging from end tensioned woven screens to end tensioned harp/piano wire screens in no more than 1 hour.
· The screening plant must come equipped with a 7,000 lb. axle, with electric brakes on the rear capable of moving portable vibratory screening plant easily and efficiently from site to site.
· Plant must carry a two (2) year parts and labor warranty.
File details come from the government source that posted it.